From: "Johannes Schindelin via GitGitGadget" <gitgitgadget@gmail.com>
To: git@vger.kernel.org
Cc: "Felipe Contreras" <felipe.contreras@gmail.com>,
"Ævar Arnfjörð Bjarmason" <avarab@gmail.com>,
"Johannes Schindelin" <Johannes.Schindelin@gmx.de>,
"Jeff King" <peff@peff.net>,
"Johannes Schindelin" <johannes.schindelin@gmx.de>
Subject: [PATCH v2 00/27] tests: use main as default branch name
Date: Tue, 17 Nov 2020 16:12:00 +0000 [thread overview]
Message-ID: <pull.762.v2.git.1605629547.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.762.git.1605221038.gitgitgadget@gmail.com>
This (big) patch series (almost) concludes the transition of Git's test
suite to use init.defaultBranch=main that was started in
js/default-branch-name-part-4-minus-1, continued in
js/default-branch-name-adjust-t5411 and in
js/default-branch-name-adjust-t5515. This transition prepares for changing
the fall-back value of init.defaultBranch accordingly (which will be done in
a different set of patch series, with an appropriate deprecation period),
reflecting what many open source projects already did followed by GitHub,
Azure Repos and others.
Instead of one huge patch that reflects essentially a search-and-replace in
the test suite, this patch series splits the changes up into chunks that are
intended to be smaller than 100kB so that they are not rejected by the Git
mailing list. Interspersed between those changes are adjustments e.g. in
alignment, to make it easier to review (or recreate) the search-and-replace
patches.
Note that this branch is based on next, mostly because it would otherwise
conflict with en/merge-tests, jk/diff-release-filespec-fix and
ds/maintenance-part-3.
To avoid even more conflicts with topics that did not even make it to seen
yet, this patch series specifically excludes t3404, t4013, t5310, t5526,
t6300, t7064, t7817, t9902: in those test scripts, we will still use master
for the time being. Once the topics in question have settled, I will send
the appropriate follow-up patches to adjust them to use main instead.
Note that even after this patch series, master is still found in t/, even
outside of the tests we excluded specifically to avoid conflicts with other
patch series that are currently in flight: t/perf/, the git p4 tests
(because git p4 still uses p4/master to refer to the remote main branch),
and some comments still refer to this name. I intend to address at least
some of those, in patch series separate from the current one.
Changes since v1:
* Dropped the commit changing the default initial branch name for git init.
* Adjusted the patch for t1402 to also replace naster by nain.
* Excluded t5526 from the patches for now, to avoid clashing with
pk/subsub-fetch-fix.
Johannes Schindelin (27):
t0060: preemptively adjust alignment
t[01]*: adjust the references to the default branch name "main"
t2*: adjust the references to the default branch name "main"
t3[0-3]*: adjust the references to the default branch name "main"
t3416: preemptively adjust alignment in a comment
t34*: adjust the references to the default branch name "main"
t3[5-9]*: adjust the references to the default branch name "main"
t4*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t550*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t6[0-3]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[4-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t9[5-7]*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t99*: adjust the references to the default branch name "main"
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t/annotate-tests.sh | 8 +-
t/lib-cvs.sh | 2 +-
t/t0002-gitfile.sh | 6 +-
t/t0020-crlf.sh | 8 +-
t/t0021-conversion.sh | 40 +-
t/t0027-auto-crlf.sh | 4 +-
t/t0028-working-tree-encoding.sh | 4 +-
t/t0041-usage.sh | 10 +-
t/t0050-filesystem.sh | 6 +-
t/t0060-path-utils.sh | 4 +-
t/t0100-previous.sh | 18 +-
t/t1004-read-tree-m-u-wf.sh | 40 +-
t/t1008-read-tree-overlay.sh | 2 +-
t/t1009-read-tree-new-index.sh | 4 +-
t/t1011-read-tree-sparse-checkout.sh | 2 +-
t/t1021-rerere-in-workdir.sh | 2 +-
t/t1090-sparse-checkout-scope.sh | 10 +-
t/t1091-sparse-checkout-builtin.sh | 2 +-
t/t1300-config.sh | 8 +-
t/t1301-shared-repo.sh | 4 +-
t/t1305-config-include.sh | 2 +-
t/t1309-early-config.sh | 4 +-
t/t1400-update-ref.sh | 72 +--
t/t1402-check-ref-format.sh | 32 +-
t/t1403-show-ref.sh | 18 +-
t/t1405-main-ref-store.sh | 42 +-
t/t1406-submodule-ref-store.sh | 30 +-
t/t1407-worktree-ref-store.sh | 32 +-
t/t1408-packed-refs.sh | 12 +-
t/t1410-reflog.sh | 56 +-
t/t1411-reflog-show.sh | 2 +-
t/t1413-reflog-detach.sh | 24 +-
t/t1414-reflog-walk.sh | 12 +-
t/t1416-ref-transaction-hooks.sh | 10 +-
t/t1430-bad-ref-name.sh | 52 +-
t/t1450-fsck.sh | 2 +-
t/t1500-rev-parse.sh | 4 +-
t/t1503-rev-parse-verify.sh | 28 +-
t/t1505-rev-parse-last.sh | 8 +-
t/t1506-rev-parse-diagnosis.sh | 4 +-
t/t1507-rev-parse-upstream.sh | 40 +-
t/t1508-at-combinations.sh | 10 +-
t/t1511-rev-parse-caret.sh | 26 +-
t/t1512-rev-parse-disambiguation.sh | 2 +-
t/t1513-rev-parse-prefix.sh | 4 +-
t/t1514-rev-parse-push.sh | 16 +-
t/t1700-split-index.sh | 2 +-
t/t2007-checkout-symlink.sh | 10 +-
t/t2009-checkout-statinfo.sh | 8 +-
t/t2010-checkout-ambiguous.sh | 4 +-
t/t2011-checkout-invalid-head.sh | 16 +-
t/t2012-checkout-last.sh | 48 +-
t/t2015-checkout-unborn.sh | 2 +-
t/t2017-checkout-orphan.sh | 44 +-
t/t2020-checkout-detach.sh | 28 +-
t/t2022-checkout-paths.sh | 22 +-
t/t2023-checkout-m.sh | 10 +-
t/t2024-checkout-dwim.sh | 70 +--
t/t2027-checkout-track.sh | 6 +-
t/t2030-unresolve-info.sh | 6 +-
t/t2060-switch.sh | 30 +-
t/t2070-restore.sh | 4 +-
t/t2106-update-index-assume-unchanged.sh | 2 +-
t/t2400-worktree-add.sh | 66 +--
t/t2401-worktree-prune.sh | 2 +-
t/t2402-worktree-list.sh | 20 +-
t/t2405-worktree-submodule.sh | 6 +-
t/t3040-subprojects-basic.sh | 2 +-
t/t3200-branch.sh | 248 ++++-----
t/t3201-branch-contains.sh | 82 +--
t/t3202-show-branch-octopus.sh | 2 +-
t/t3203-branch-output.sh | 40 +-
t/t3204-branch-name-interpretation.sh | 6 +-
t/t3205-branch-color.sh | 8 +-
t/t3206-range-diff.sh | 40 +-
t/t3206/history.export | 2 +-
t/t3210-pack-refs.sh | 4 +-
t/t3211-peel-ref.sh | 4 +-
t/t3301-notes.sh | 6 +-
t/t3302-notes-index-expensive.sh | 2 +-
t/t3303-notes-subtrees.sh | 8 +-
t/t3304-notes-mixed.sh | 8 +-
t/t3308-notes-merge.sh | 2 +-
t/t3320-notes-merge-worktrees.sh | 4 +-
t/t3400-rebase.sh | 60 +--
t/t3402-rebase-merge.sh | 44 +-
t/t3403-rebase-skip.sh | 6 +-
t/t3405-rebase-malformed.sh | 8 +-
t/t3406-rebase-message.sh | 24 +-
t/t3407-rebase-abort.sh | 18 +-
t/t3408-rebase-multi-line.sh | 2 +-
t/t3409-rebase-preserve-merges.sh | 10 +-
t/t3412-rebase-root.sh | 28 +-
t/t3413-rebase-hook.sh | 42 +-
t/t3415-rebase-autosquash.sh | 2 +-
t/t3416-rebase-onto-threedots.sh | 54 +-
t/t3418-rebase-continue.sh | 24 +-
t/t3419-rebase-patch-id.sh | 12 +-
t/t3420-rebase-autostash.sh | 8 +-
t/t3423-rebase-reword.sh | 6 +-
t/t3427-rebase-subtree.sh | 20 +-
t/t3430-rebase-merges.sh | 16 +-
t/t3431-rebase-fork-point.sh | 32 +-
t/t3432-rebase-fast-forward.sh | 34 +-
t/t3434-rebase-i18n.sh | 8 +-
t/t3435-rebase-gpg-sign.sh | 4 +-
t/t3436-rebase-more-options.sh | 2 +-
t/t3500-cherry.sh | 12 +-
t/t3501-revert-cherry-pick.sh | 4 +-
t/t3502-cherry-pick-merge.sh | 2 +-
t/t3503-cherry-pick-root.sh | 10 +-
t/t3504-cherry-pick-rerere.sh | 24 +-
t/t3505-cherry-pick-empty.sh | 24 +-
t/t3506-cherry-pick-ff.sh | 8 +-
t/t3507-cherry-pick-conflict.sh | 2 +-
t/t3508-cherry-pick-many-commits.sh | 38 +-
t/t3509-cherry-pick-merge-df.sh | 2 +-
t/t3512-cherry-pick-submodule.sh | 2 +-
t/t3600-rm.sh | 10 +-
t/t3701-add-interactive.sh | 4 +-
t/t3901-i18n-patch.sh | 40 +-
t/t3903-stash.sh | 32 +-
t/t3910-mac-os-precompose.sh | 6 +-
t/t4014-format-patch.sh | 176 +++---
t/t4015-diff-whitespace.sh | 2 +-
t/t4017-diff-retval.sh | 2 +-
t/t4038-diff-combined.sh | 14 +-
t/t4041-diff-submodule-option.sh | 2 +-
t/t4048-diff-combined-binary.sh | 10 +-
t/t4052-stat-output.sh | 4 +-
t/t4056-diff-order.sh | 2 +-
t/t4057-diff-combined-paths.sh | 20 +-
t/t4061-diff-indent.sh | 24 +-
t/t4066-diff-emit-delay.sh | 2 +-
t/t4068-diff-symmetric-merge-base.sh | 48 +-
t/t4103-apply-binary.sh | 36 +-
t/t4108-apply-threeway.sh | 14 +-
t/t4121-apply-diffs.sh | 2 +-
t/t4122-apply-symlink-inside.sh | 6 +-
t/t4150-am.sh | 26 +-
t/t4200-rerere.sh | 20 +-
t/t4201-shortlog.sh | 2 +-
t/t4202-log.sh | 106 ++--
t/t4203-mailmap.sh | 2 +-
t/t4204-patch-id.sh | 26 +-
t/t4207-log-decoration-colors.sh | 6 +-
t/t4208-log-magic-pathspec.sh | 4 +-
t/t4211/history.export | 2 +-
t/t4214-log-graph-octopus.sh | 2 +-
t/t4216-log-bloom.sh | 4 +-
t/t4253-am-keep-cr-dos.sh | 20 +-
t/t4257-am-interactive.sh | 2 +-
t/t5150-request-pull.sh | 34 +-
t/t5304-prune.sh | 2 +-
t/t5305-include-tag.sh | 2 +-
t/t5312-prune-corruption.sh | 16 +-
t/t5317-pack-objects-filter-objects.sh | 2 +-
t/t5322-pack-objects-sparse.sh | 2 +-
t/t5323-pack-redundant.sh | 66 +--
t/t5400-send-pack.sh | 60 +--
t/t5401-update-hooks.sh | 24 +-
t/t5402-post-merge-hook.sh | 2 +-
t/t5403-post-checkout-hook.sh | 6 +-
t/t5404-tracking-branches.sh | 8 +-
t/t5405-send-pack-rewind.sh | 6 +-
t/t5407-post-rewrite-hook.sh | 2 +-
t/t5410-receive-pack-alternates.sh | 4 +-
t/t5500-fetch-pack.sh | 28 +-
t/t5501-fetch-push-alternates.sh | 4 +-
t/t5502-quickfetch.sh | 6 +-
t/t5503-tagfollow.sh | 12 +-
t/t5504-fetch-receive-strict.sh | 20 +-
t/t5505-remote.sh | 148 +++---
t/t5506-remote-groups.sh | 4 +-
t/t5509-fetch-push-namespaces.sh | 30 +-
t/t5510-fetch.sh | 162 +++---
t/t5511-refspec.sh | 12 +-
t/t5512-ls-remote.sh | 26 +-
t/t5514-fetch-multiple.sh | 30 +-
t/t5516-fetch-push.sh | 500 +++++++++---------
t/t5517-push-mirror.sh | 124 ++---
t/t5518-fetch-exit-status.sh | 6 +-
t/t5519-push-alternates.sh | 12 +-
t/t5520-pull.sh | 30 +-
t/t5521-pull-options.sh | 16 +-
t/t5523-push-upstream.sh | 30 +-
t/t5527-fetch-odd-refs.sh | 14 +-
t/t5528-push-default.sh | 98 ++--
t/t5529-push-errors.sh | 2 +-
t/t5530-upload-pack-error.sh | 2 +-
t/t5531-deep-submodule-push.sh | 188 +++----
t/t5533-push-cas.sh | 142 ++---
t/t5534-push-signed.sh | 4 +-
t/t5537-fetch-shallow.sh | 30 +-
t/t5538-push-shallow.sh | 22 +-
t/t5539-fetch-http-shallow.sh | 14 +-
t/t5540-http-push-webdav.sh | 8 +-
t/t5541-http-push-smart.sh | 40 +-
t/t5542-push-http-shallow.sh | 8 +-
t/t5543-atomic-push.sh | 80 +--
t/t5545-push-options.sh | 62 +--
t/t5548-push-porcelain.sh | 64 +--
t/t5550-http-fetch-dumb.sh | 20 +-
t/t5551-http-fetch-smart.sh | 20 +-
t/t5552-skipping-fetch-negotiator.sh | 2 +-
t/t5553-set-upstream.sh | 82 +--
t/t5561-http-backend.sh | 4 +-
t/t556x_common | 8 +-
t/t5570-git-daemon.sh | 16 +-
t/t5571-pre-push-hook.sh | 4 +-
t/t5572-pull-submodule.sh | 4 +-
t/t5580-unc-paths.sh | 2 +-
t/t5581-http-curl-verbose.sh | 2 +-
t/t5582-fetch-negative-refspec.sh | 22 +-
t/t5601-clone.sh | 4 +-
t/t5604-clone-reference.sh | 12 +-
t/t5605-clone-local.sh | 10 +-
t/t5606-clone-options.sh | 8 +-
t/t5607-clone-bundle.sh | 14 +-
t/t5608-clone-2gb.sh | 2 +-
t/t5609-clone-branch.sh | 6 +-
t/t5610-clone-detached.sh | 4 +-
t/t5611-clone-config.sh | 16 +-
t/t5612-clone-refspec.sh | 42 +-
t/t5614-clone-submodules-shallow.sh | 2 +-
t/t5616-partial-clone.sh | 50 +-
t/t5617-clone-submodules-remote.sh | 6 +-
t/t5700-protocol-v1.sh | 16 +-
t/t5701-git-serve.sh | 16 +-
t/t5702-protocol-v2.sh | 50 +-
t/t5703-upload-pack-ref-in-want.sh | 60 +--
t/t5801-remote-helpers.sh | 24 +-
t/t6000-rev-list-misc.sh | 2 +-
t/t6001-rev-list-graft.sh | 2 +-
t/t6004-rev-list-path-optim.sh | 14 +-
t/t6006-rev-list-format.sh | 14 +-
t/t6007-rev-list-cherry-pick-file.sh | 4 +-
t/t6008-rev-list-submodule.sh | 2 +-
t/t6009-rev-list-parent.sh | 6 +-
t/t6012-rev-list-simplify.sh | 8 +-
t/t6013-rev-list-reverse-parents.sh | 10 +-
t/t6016-rev-list-graph-simplify-history.sh | 2 +-
t/t6017-rev-list-stdin.sh | 8 +-
t/t6018-rev-list-glob.sh | 50 +-
t/t6019-rev-list-ancestry-path.sh | 6 +-
t/t6030-bisect-porcelain.sh | 10 +-
t/t6040-tracking-info.sh | 54 +-
t/t6050-replace.sh | 10 +-
t/t6101-rev-parse-parents.sh | 2 +-
t/t6110-rev-list-sparse.sh | 2 +-
t/t6111-rev-list-treesame.sh | 6 +-
t/t6112-rev-list-filters-objects.sh | 14 +-
t/t6120-describe.sh | 20 +-
t/t6200-fmt-merge-msg.sh | 50 +-
t/t6302-for-each-ref-filter.sh | 58 +-
t/t6400-merge-df.sh | 6 +-
t/t6402-merge-rename.sh | 46 +-
t/t6404-recursive-merge.sh | 4 +-
t/t6405-merge-symlinks.sh | 14 +-
t/t6406-merge-attr.sh | 24 +-
t/t6407-merge-binary.sh | 6 +-
t/t6409-merge-subtree.sh | 16 +-
t/t6411-merge-filemode.sh | 10 +-
t/t6412-merge-large-rename.sh | 6 +-
t/t6413-merge-crlf.sh | 2 +-
t/t6414-merge-rename-nocruft.sh | 2 +-
t/t6415-merge-dir-to-symlink.sh | 22 +-
t/t6416-recursive-corner-cases.sh | 28 +-
t/t6417-merge-ours-theirs.sh | 28 +-
t/t6418-merge-text-auto.sh | 12 +-
t/t6419-merge-ignorecase.sh | 10 +-
t/t6422-merge-rename-corner-cases.sh | 12 +-
t/t6425-merge-rename-delete.sh | 2 +-
t/t6427-diff3-conflict-markers.sh | 14 +-
t/t6430-merge-recursive.sh | 18 +-
t/t6432-merge-recursive-space-options.sh | 6 +-
t/t6433-merge-toplevel.sh | 8 +-
t/t6434-merge-recursive-rename-options.sh | 6 +-
t/t6436-merge-overwrite.sh | 2 +-
t/t6437-submodule-merge.sh | 14 +-
t/t6439-merge-co-error-msgs.sh | 6 +-
t/t6501-freshen-objects.sh | 2 +-
t/t7003-filter-branch.sh | 40 +-
t/t7004-tag.sh | 8 +-
t/t7030-verify-tag.sh | 2 +-
t/t7060-wtstatus.sh | 26 +-
t/t7063-status-untracked-cache.sh | 14 +-
t/t7102-reset.sh | 6 +-
t/t7113-post-index-change-hook.sh | 2 +-
t/t7201-co.sh | 110 ++--
t/t7400-submodule-basic.sh | 20 +-
t/t7403-submodule-sync.sh | 10 +-
t/t7406-submodule-update.sh | 38 +-
t/t7407-submodule-foreach.sh | 24 +-
t/t7409-submodule-detached-work-tree.sh | 8 +-
t/t7417-submodule-path-url.sh | 2 +-
t/t7501-commit-basic-functionality.sh | 2 +-
t/t7502-commit-porcelain.sh | 12 +-
...3-pre-commit-and-pre-merge-commit-hooks.sh | 42 +-
t/t7504-commit-msg-hook.sh | 24 +-
t/t7505-prepare-commit-msg-hook.sh | 20 +-
t/t7508-status.sh | 58 +-
t/t7510-signed-commit.sh | 2 +-
t/t7512-status-help.sh | 40 +-
t/t7517-per-repo-email.sh | 12 +-
t/t7600-merge.sh | 44 +-
t/t7606-merge-custom.sh | 2 +-
t/t7608-merge-messages.sh | 36 +-
t/t7610-mergetool.sh | 174 +++---
t/t7611-merge-abort.sh | 4 +-
t/t7612-merge-verify-signatures.sh | 2 +-
t/t7614-merge-signoff.sh | 24 +-
t/t7701-repack-unpack-unreachable.sh | 2 +-
t/t7800-difftool.sh | 38 +-
t/t7810-grep.sh | 28 +-
t/t8001-annotate.sh | 2 +-
t/t8003-blame-corner-cases.sh | 4 +-
t/t8004-blame-with-conflicts.sh | 14 +-
t/t9001-send-email.sh | 28 +-
t/t9100-git-svn-basic.sh | 2 +-
t/t9145-git-svn-master-branch.sh | 6 +-
t/t9151-svn-mergeinfo.sh | 2 +-
t/t9155-git-svn-fetch-deleted-tag.sh | 2 +-
t/t9156-git-svn-fetch-deleted-tag-2.sh | 6 +-
t/t9163-git-svn-reset-clears-caches.sh | 2 +-
t/t9169-git-svn-dcommit-crlf.sh | 2 +-
t/t9300-fast-import.sh | 82 +--
t/t9301-fast-import-notes.sh | 14 +-
t/t9302-fast-import-unpack-limit.sh | 16 +-
t/t9350-fast-export.sh | 86 +--
t/t9351-fast-export-anonymize.sh | 4 +-
t/t9400-git-cvsserver-server.sh | 32 +-
t/t9401-git-cvsserver-crlf.sh | 16 +-
t/t9402-git-cvsserver-refs.sh | 8 +-
t/t9500-gitweb-standalone-no-errors.sh | 20 +-
t/t9501-gitweb-standalone-http-status.sh | 14 +-
t/t9502-gitweb-standalone-parse-output.sh | 16 +-
t/t9600-cvsimport.sh | 2 +-
t/t9601-cvsimport-vendor-branch.sh | 16 +-
t/t9602-cvsimport-branches-tags.sh | 4 +-
t/t9603-cvsimport-patchsets.sh | 8 +-
t/t9800-git-p4-basic.sh | 2 +-
t/t9801-git-p4-branch.sh | 16 +-
t/t9806-git-p4-options.sh | 18 +-
t/t9807-git-p4-submit.sh | 2 +-
t/t9811-git-p4-label-import.sh | 2 +-
t/t9903-bash-prompt.sh | 114 ++--
t/test-lib.sh | 13 +
348 files changed, 3879 insertions(+), 3866 deletions(-)
base-commit: aff20da3a209088e7f8f3632077fa11b86453d67
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-762%2Fdscho%2Fuse-main-as-default-branch-name-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-762/dscho/use-main-as-default-branch-name-v2
Pull-Request: https://github.com/gitgitgadget/git/pull/762
Range-diff vs v1:
1: 0a05d319c0 = 1: 0a05d319c0 t0060: preemptively adjust alignment
2: 830130fa9f ! 2: b8fa037791 t[01]*: adjust the references to the default branch name "main"
@@ Commit message
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
- -e 's/Master/Main/g' -- t[01]*.sh)
+ -e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh)
+
+ Note that t5533 contains a variation of the name `master` (`naster`)
+ that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
+ Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
## t/t0002-gitfile.sh ##
@@ t/t1402-check-ref-format.sh: valid_ref !MINGW "$ref" '--refspec-pattern --allow-
- test "$refname2" = master'
+ test "$refname2" = main'
- test_expect_success 'check-ref-format --branch -naster' '
- test_must_fail git check-ref-format --branch -naster >actual &&
+-test_expect_success 'check-ref-format --branch -naster' '
+- test_must_fail git check-ref-format --branch -naster >actual &&
++test_expect_success 'check-ref-format --branch -nain' '
++ test_must_fail git check-ref-format --branch -nain >actual &&
+ test_must_be_empty actual
+ '
+
@@ t/t1402-check-ref-format.sh: test_expect_success 'check-ref-format --branch from subdir' '
T=$(git write-tree) &&
3: 9b368b1ce1 = 3: 0d4f1275f7 t2*: adjust the references to the default branch name "main"
4: 0697ef9742 = 4: aee29a0528 t3[0-3]*: adjust the references to the default branch name "main"
5: e494152c3e = 5: 041ad86e33 t3416: preemptively adjust alignment in a comment
6: ec7102156e = 6: 2f62b3f469 t34*: adjust the references to the default branch name "main"
7: 7a9349653d = 7: 0cf754646e t3[5-9]*: adjust the references to the default branch name "main"
8: d141e476b1 = 8: cf6c1d1d83 t4*: adjust the references to the default branch name "main"
9: 86c85666d5 = 9: 6ff4594a28 t5323: prepare centered comment for `master` -> `main`
10: 55b6c04fc0 = 10: be29e07892 t5[0-4]*: adjust the references to the default branch name "main"
11: 40cdd5db8c = 11: 5126d90a32 t5503: prepare aligned comment for replacing `master` with `main`
12: b5ca6e9acd = 12: 332677cbf9 t550*: adjust the references to the default branch name "main"
13: 727de6fdf5 = 13: b7333ef201 t551*: adjust the references to the default branch name "main"
14: 3aef39320e ! 14: 4b1b1ee51f t55[23]*: adjust the references to the default branch name "main"
@@ Metadata
## Commit message ##
t55[23]*: adjust the references to the default branch name "main"
- This trick was performed via
+ Carefully excluding t5526, which sees independent development elsewhere
+ at the time of writing, we use `main` as the default branch name in
+ t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
- -e 's/Master/Main/g' -e 's/naster/nain/g' -- t55[23]*.sh)
+ -e 's/Master/Main/g' -e 's/naster/nain/g' -- \
+ t55[23]*.sh &&
+ git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
@@ t/t5523-push-upstream.sh: test_expect_success TTY 'push --no-progress suppresses
'
- ## t/t5526-fetch-submodules.sh ##
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "don't fetch submodule when newly re
- test_i18ncmp expect.err actual.err &&
- (
- cd submodule &&
-- git checkout -q master
-+ git checkout -q main
- )
- '
-
-@@ t/t5526-fetch-submodules.sh: test_expect_success 'fetch new submodule commits on-demand without .gitmodules e
- git config -f .gitmodules --remove-section submodule.sub1 &&
- git add .gitmodules &&
- git commit -m "delete gitmodules file" &&
-- git checkout -B master &&
-+ git checkout -B main &&
- git -C downstream fetch &&
-- git -C downstream checkout origin/master &&
-+ git -C downstream checkout origin/main &&
-
- C=$(git -C submodule commit-tree -m "yet another change outside refs/heads" HEAD^{tree}) &&
- git -C submodule update-ref refs/changes/7 $C &&
-
## t/t5527-fetch-odd-refs.sh ##
@@ t/t5527-fetch-odd-refs.sh: test_description='test fetching of oddly-named refs'
@@ t/t5539-fetch-http-shallow.sh: test_expect_success 'fetching deepen' '
three
## t/test-lib.sh ##
-@@ t/test-lib.sh: case "$TEST_NUMBER" in
+@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
+ esac
+
+ case "$TEST_NUMBER" in
+-3404|4013|5310)
++3404|4013|5310|5526)
+ # Avoid conflicts with patch series that are cooking at the same time
+ # as the patch series changing the default of `init.defaultBranch`.
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
;;
15: 8a2511b38e = 15: c37d97c2d8 t55[4-9]*: adjust the references to the default branch name "main"
16: af24b6d69d = 16: dda6ce098c t5[6-9]*: adjust the references to the default branch name "main"
17: dc8011e4bf ! 17: 27d7994933 t6[0-3]*: adjust the references to the default branch name "main"
@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac
case "$TEST_NUMBER" in
--3404|4013|5310)
-+3404|4013|5310|6300)
+-3404|4013|5310|5526)
++3404|4013|5310|5526|6300)
# Avoid conflicts with patch series that are cooking at the same time
# as the patch series changing the default of `init.defaultBranch`.
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
18: e2f1409399 = 18: 04878e2268 t64*: preemptively adjust alignment to prepare for `master` -> `main`
19: 1ef276c97e = 19: f0fa12b577 t6[4-9]*: adjust the references to the default branch name "main"
20: 7f67471c03 ! 20: f9c30dc516 t7[0-4]*: adjust the references to the default branch name "main"
@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac
case "$TEST_NUMBER" in
--3404|4013|5310|6300)
-+3404|4013|5310|6300|7064)
+-3404|4013|5310|5526|6300)
++3404|4013|5310|5526|6300|7064)
# Avoid conflicts with patch series that are cooking at the same time
# as the patch series changing the default of `init.defaultBranch`.
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
21: 07714a8c65 ! 21: 2b269ca983 t7[5-9]*: adjust the references to the default branch name "main"
@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac
case "$TEST_NUMBER" in
--3404|4013|5310|6300|7064)
-+3404|4013|5310|6300|7064|7817)
+-3404|4013|5310|5526|6300|7064)
++3404|4013|5310|5526|6300|7064|7817)
# Avoid conflicts with patch series that are cooking at the same time
# as the patch series changing the default of `init.defaultBranch`.
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
22: 3a987c452e = 22: 5cac0065c8 t8*: adjust the references to the default branch name "main"
23: e788b61074 = 23: 57e90d459a t9[0-4]*: adjust the references to the default branch name "main"
24: 2367a322c8 = 24: f9e01de17f t9[5-7]*: adjust the references to the default branch name "main"
25: bd32d55eab = 25: 4da4b69114 tests(git-p4): transition to the default branch name `main`
26: 73100477a8 ! 26: cfa29c7f71 t99*: adjust the references to the default branch name "main"
@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac
case "$TEST_NUMBER" in
--3404|4013|5310|6300|7064|7817)
-+3404|4013|5310|6300|7064|7817|9902)
+-3404|4013|5310|5526|6300|7064|7817)
++3404|4013|5310|5526|6300|7064|7817|9902)
# Avoid conflicts with patch series that are cooking at the same time
# as the patch series changing the default of `init.defaultBranch`.
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
27: 09b611a359 ! 27: fc0c1f6463 tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
@@ Commit message
`master` -> `main` rename before the automatable ones.
Now that the transition is almost complete, we can stop using it in most
- instances. The only exception is t9902: at the time of writing, there
- are other patches in flight that touch this test script, therefore the
- transition to `main` is postponed to a later date.
+ instances. The only two exceptions are t5526 and t9902: at the time of
+ writing, there are other patches in flight that touch these test
+ scripts, therefore their transition to `main` is postponed to a later
+ date.
This patch is the result of this command:
sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
- git checkout HEAD -- t/t9902\*
+ git checkout HEAD -- t/t5526\* t/t9902\*
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
@@ t/t5510-fetch.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH,C_LOCALE_OUTPUT 'f
test_commit extraaa &&
(
- ## t/t5526-fetch-submodules.sh ##
-@@ t/t5526-fetch-submodules.sh: test_expect_success setup '
- )
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "fetch --recurse-submodules recurses into submodules" '
-+test_expect_success "fetch --recurse-submodules recurses into submodules" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "fetch --recurse-submodules recurses
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "submodule.recurse option triggers recursive fetch" '
-+test_expect_success "submodule.recurse option triggers recursive fetch" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "submodule.recurse option triggers r
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "fetch --recurse-submodules -j2 has the same output behaviour" '
-+test_expect_success "fetch --recurse-submodules -j2 has the same output behaviour" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "fetch --no-recurse-submodules only fetches superproject" '
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" '
-+test_expect_success "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" '
- (
- cd downstream &&
- git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "using fetchRecurseSubmodules=false in .git/config overrides
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config" '
-+test_expect_success "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config" '
- (
- cd downstream &&
- git fetch --recurse-submodules >../actual.out 2>../actual.err &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "--quiet propagates to parallel submodules" '
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "--dry-run propagates to submodules" '
-+test_expect_success "--dry-run propagates to submodules" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "--dry-run propagates to submodules"
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Without --dry-run propagates to submodules" '
-+test_expect_success "Without --dry-run propagates to submodules" '
- (
- cd downstream &&
- git fetch --recurse-submodules >../actual.out 2>../actual.err
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Without --dry-run propagates to sub
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "recurseSubmodules=true propagates into submodules" '
-+test_expect_success "recurseSubmodules=true propagates into submodules" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "recurseSubmodules=true propagates i
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "--recurse-submodules overrides config in submodule" '
-+test_expect_success "--recurse-submodules overrides config in submodule" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "--no-recurse-submodules overrides config setting" '
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when no new commits are fetched in the superproject" '
-+test_expect_success "Recursion doesn't happen when no new commits are fetched in the superproject" '
- (
- cd downstream &&
- (
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when no ne
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion stops when no new submodule commits are fetched" '
-+test_expect_success "Recursion stops when no new submodule commits are fetched" '
- head1=$(git rev-parse --short HEAD) &&
- git add submodule &&
- git commit -m "new submodule" &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion stops when no new submodu
- test_must_be_empty actual.out
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when new superproject commits don't change any submodules" '
-+test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" '
- add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
- echo a > file &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when new s
- test_i18ncmp expect.err.file actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up config in submodule" '
-+test_expect_success "Recursion picks up config in submodule" '
- (
- cd downstream &&
- git fetch --recurse-submodules &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up config in submod
- test_must_be_empty actual.out
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up all submodules when necessary" '
-+test_expect_success "Recursion picks up all submodules when necessary" '
- add_upstream_commit &&
- (
- cd submodule &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up all submodules w
- test_must_be_empty actual.out
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" '
-+test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" '
- add_upstream_commit &&
- (
- cd submodule &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' do
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" '
-+test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" '
- head1=$(git rev-parse --short HEAD) &&
- git add submodule &&
- git commit -m "new submodule" &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' re
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" '
-+test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" '
- add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
- echo a >> file &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' st
- test_i18ncmp expect.err.file actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'fetch.recurseSubmodules=on-demand' overrides global config" '
-+test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config" '
- (
- cd downstream &&
- git fetch --recurse-submodules
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'fetch.recurseSubmodules=on-demand'
- test_i18ncmp expect.err.2 actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" '
-+test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" '
- (
- cd downstream &&
- git fetch --recurse-submodules
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'submodule.<sub>.fetchRecurseSubmod
- test_i18ncmp expect.err.2 actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "don't fetch submodule when newly recorded commits are already present" '
-+test_expect_success "don't fetch submodule when newly recorded commits are already present" '
- (
- cd submodule &&
- git checkout -q HEAD^^
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "don't fetch submodule when newly re
- )
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'fetch.recurseSubmodules=on-demand' works also without .gitmodules entry" '
-+test_expect_success "'fetch.recurseSubmodules=on-demand' works also without .gitmodules entry" '
- (
- cd downstream &&
- git fetch --recurse-submodules
-
## t/t5703-upload-pack-ref-in-want.sh ##
@@ t/t5703-upload-pack-ref-in-want.sh: test_expect_success 'server is initially behind - ref in want' '
test_cmp expected actual
28: f853fa946f < -: ---------- Change the default branch name to `main`
--
gitgitgadget
next prev parent reply other threads:[~2020-11-17 16:12 UTC|newest]
Thread overview: 163+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-12 22:43 [PATCH 00/28] Use main as default branch name Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 01/28] t0060: preemptively adjust alignment Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 02/28] t[01]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 03/28] t2*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 04/28] t3[0-3]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 05/28] t3416: preemptively adjust alignment in a comment Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 06/28] t34*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 07/28] t3[5-9]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 08/28] t4*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 09/28] t5323: prepare centered comment for `master` -> `main` Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 10/28] t5[0-4]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 11/28] t5503: prepare aligned comment for replacing `master` with `main` Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 12/28] t550*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 13/28] t551*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 14/28] t55[23]*: " Johannes Schindelin via GitGitGadget
2020-11-13 10:02 ` Ævar Arnfjörð Bjarmason
2020-11-13 14:18 ` Johannes Schindelin
2020-11-16 20:07 ` Junio C Hamano
2020-11-12 22:43 ` [PATCH 15/28] t55[4-9]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 16/28] t5[6-9]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 17/28] t6[0-3]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 18/28] t64*: preemptively adjust alignment to prepare for `master` -> `main` Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 19/28] t6[4-9]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 20/28] t7[0-4]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 21/28] t7[5-9]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 22/28] t8*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 23/28] t9[0-4]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 24/28] t9[5-7]*: " Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 25/28] tests(git-p4): transition to the default branch name `main` Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 26/28] t99*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 27/28] tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed Johannes Schindelin via GitGitGadget
2020-11-12 22:43 ` [PATCH 28/28] Change the default branch name to `main` Don Goodman-Wilson via GitGitGadget
2020-11-13 9:57 ` Ævar Arnfjörð Bjarmason
2020-11-13 14:09 ` Johannes Schindelin
2020-11-16 20:04 ` Junio C Hamano
2020-11-13 0:11 ` [PATCH 00/28] Use main as default branch name Felipe Contreras
2020-11-13 12:55 ` Ævar Arnfjörð Bjarmason
2020-11-13 14:22 ` Johannes Schindelin
2020-11-13 16:13 ` [RFC/PATCH] tests: support testing with an arbitrary default branch (sort of) Ævar Arnfjörð Bjarmason
2020-11-13 19:14 ` Jeff King
2020-11-13 22:00 ` Johannes Schindelin
2020-11-13 22:39 ` Johannes Schindelin
2020-11-13 23:49 ` Ævar Arnfjörð Bjarmason
[not found] ` <nycvar.QRO.7.76.6.2011162118060.18437@tvgsbejvaqbjf.bet>
2020-11-18 13:32 ` Ævar Arnfjörð Bjarmason
2020-11-18 14:16 ` Felipe Contreras
2020-11-20 11:36 ` Ævar Arnfjörð Bjarmason
2020-11-20 16:00 ` Felipe Contreras
2020-11-18 15:56 ` Junio C Hamano
2020-11-19 9:32 ` Johannes Schindelin
2020-11-19 19:35 ` Junio C Hamano
2020-11-22 19:07 ` Johannes Schindelin
2020-11-19 10:46 ` Johannes Schindelin
2020-11-14 0:25 ` Felipe Contreras
2020-11-13 17:42 ` [PATCH 00/28] Use main as default branch name Felipe Contreras
2020-11-14 6:13 ` Junio C Hamano
2020-11-16 19:52 ` Junio C Hamano
2020-11-17 16:10 ` Johannes Schindelin
2020-11-17 19:09 ` Junio C Hamano
2020-11-18 20:58 ` Johannes Schindelin
2020-11-17 16:12 ` Johannes Schindelin via GitGitGadget [this message]
2020-11-17 16:12 ` [PATCH v2 01/27] t0060: preemptively adjust alignment Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 02/27] t[01]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 03/27] t2*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 04/27] t3[0-3]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 05/27] t3416: preemptively adjust alignment in a comment Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 06/27] t34*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 07/27] t3[5-9]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 08/27] t4*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 09/27] t5323: prepare centered comment for `master` -> `main` Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 10/27] t5[0-4]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 11/27] t5503: prepare aligned comment for replacing `master` with `main` Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 12/27] t550*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 13/27] t551*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 14/27] t55[23]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 15/27] t55[4-9]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 16/27] t5[6-9]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 17/27] t6[0-3]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 18/27] t64*: preemptively adjust alignment to prepare for `master` -> `main` Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 19/27] t6[4-9]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 20/27] t7[0-4]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 21/27] t7[5-9]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 22/27] t8*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 23/27] t9[0-4]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 24/27] t9[5-7]*: " Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 25/27] tests(git-p4): transition to the default branch name `main` Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 26/27] t99*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-17 16:12 ` [PATCH v2 27/27] tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed Johannes Schindelin via GitGitGadget
2020-11-18 11:48 ` [PATCH v2 28/27] tests: run tests omitted by PREPARE_FOR_MAIN_BRANCH Ævar Arnfjörð Bjarmason
2020-11-18 23:56 ` Johannes Schindelin
2020-11-19 19:30 ` Junio C Hamano
2020-11-20 13:09 ` Johannes Schindelin
2020-11-20 18:08 ` Junio C Hamano
2020-11-18 23:44 ` [PATCH v3 00/28] tests: use main as default branch name Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 01/28] tests: mark tests relying on the current default for `init.defaultBranch` Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 02/28] t0060: preemptively adjust alignment Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 03/28] t[01]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 04/28] t2*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 05/28] t3[0-3]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 06/28] t3416: preemptively adjust alignment in a comment Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 07/28] t34*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 08/28] t3[5-9]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 09/28] t4*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 10/28] t5323: prepare centered comment for `master` -> `main` Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 11/28] t5[0-4]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 12/28] t5503: prepare aligned comment for replacing `master` with `main` Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 13/28] t550*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 14/28] t551*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 15/28] t55[23]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 16/28] t55[4-9]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 17/28] t5[6-9]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 18/28] t6[0-3]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 19/28] t64*: preemptively adjust alignment to prepare for `master` -> `main` Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 20/28] t6[4-9]*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 21/28] t7[0-4]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 22/28] t7[5-9]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 23/28] t8*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 24/28] t9[0-4]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 25/28] t9[5-7]*: " Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 26/28] tests(git-p4): transition to the default branch name `main` Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 27/28] t99*: adjust the references to the default branch name "main" Johannes Schindelin via GitGitGadget
2020-11-18 23:44 ` [PATCH v3 28/28] tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed Johannes Schindelin via GitGitGadget
2020-11-19 23:35 ` [PATCH v3 00/28] tests: use main as default branch name Junio C Hamano
2020-11-17 20:48 ` [PATCH 00/28] Use " Eric W. Biederman
2020-11-17 22:47 ` Felipe Contreras
2020-11-17 23:33 ` Jeff King
2020-11-18 0:07 ` Junio C Hamano
2020-11-18 1:25 ` Jeff King
2020-11-18 2:40 ` Jonathan Nieder
2020-11-18 5:43 ` Junio C Hamano
2020-11-18 11:32 ` Johannes Schindelin
2020-11-18 15:43 ` Junio C Hamano
2020-11-19 9:22 ` Johannes Schindelin
2020-11-18 0:18 ` Felipe Contreras
2020-11-18 1:22 ` Jeff King
2020-11-18 1:45 ` Felipe Contreras
2020-11-18 2:06 ` Jeff King
2020-11-18 2:39 ` Jonathan Nieder
2020-11-18 10:12 ` Felipe Contreras
2020-11-18 9:04 ` Felipe Contreras
2020-11-17 22:55 ` Junio C Hamano
2020-11-17 23:16 ` Felipe Contreras
2020-11-18 0:10 ` Junio C Hamano
2020-11-18 0:51 ` Felipe Contreras
2020-11-18 23:45 ` Philip Oakley
2020-11-19 0:00 ` Johannes Schindelin
2020-11-19 0:30 ` Philip Oakley
2020-11-19 0:30 ` Peter Hadlaw
2020-11-19 0:44 ` Philip Oakley
2020-11-19 0:55 ` Peter Hadlaw
2020-11-19 1:51 ` Junio C Hamano
2020-11-19 10:35 ` Philip Oakley
2020-11-19 11:10 ` Sergey Organov
2020-11-19 11:50 ` Philip Oakley
2020-11-19 12:33 ` Sergey Organov
2020-11-21 23:01 ` Junio C Hamano
2020-11-22 10:21 ` Sergey Organov
2020-11-22 11:20 ` Philip Oakley
2020-11-22 13:23 ` Sergey Organov
2020-11-22 20:18 ` Philip Oakley
2020-11-22 21:56 ` Felipe Contreras
2020-11-22 23:54 ` Junio C Hamano
2020-11-18 2:56 ` Jonathan Nieder
2020-11-18 5:57 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pull.762.v2.git.1605629547.gitgitgadget@gmail.com \
--to=gitgitgadget@gmail.com \
--cc=Johannes.Schindelin@gmx.de \
--cc=avarab@gmail.com \
--cc=felipe.contreras@gmail.com \
--cc=git@vger.kernel.org \
--cc=peff@peff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).