warning: no common commits - slow pull

warning: no common commits - slow pull

[Len Brown]

A couple of hours ago I pulled my reference copy of Linux tree,
which brought the tip here:

commit 7cf712db6087342e5e7e259d3883a7b5ac3212d1
Merge: 58a14ee... 30ddb15...
Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
Date:   Sun Feb 10 12:03:57 2008 -0800

    Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

Then, 10 minutes ago I did a pull to bring the head here:

commit 19af35546de68c872dcb687613e0902a602cb20e
Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
Date:   Sun Feb 10 14:18:14 2008 -0800

    Linux 2.6.25-rc1

But this second pull seems to have re-downloaded 172MB,
when it should have only needed the last few commits.

thanks,
-Len


[lenb@d975xbx2 linus (master)]$ git pull
remote: Counting objects: 447, done.
remote: Compressing objects: 100% (39/39), done.
remote: Total 328 (delta 291), reused 325 (delta 289)
Receiving objects: 100% (328/328), 60.81 KiB, done.
Resolving deltas: 100% (291/291), completed with 97 local objects.
warning: no common commits
remote: Counting objects: 708151, done.
remote: Compressing objects: 100% (124656/124656), done.
remote: Total 708151 (delta 587427), reused 702559 (delta 582537)
Receiving objects: 100% (708151/708151), 172.17 MiB | 1251 KiB/s, done.
Resolving deltas: 100% (587427/587427), done.
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
 * [new tag]         v2.6.25-rc1 -> v2.6.25-rc1
Updating 7cf712d..19af355
Fast forward
 Makefile                                  |    4 +-
 arch/arm/configs/omap_h2_1610_defconfig   |  201 +++++---
 arch/arm/configs/omap_osk_5912_defconfig  |  110 ++--
 arch/arm/configs/orion_defconfig          |   93 ++--
 arch/arm/kernel/setup.c                   |    2 +-
 arch/arm/mach-at91/clock.c                |    2 +-
 arch/arm/mach-davinci/clock.c             |    4 +-
 arch/arm/mach-omap1/Makefile              |    6 +-
 arch/arm/mach-omap1/board-ams-delta.c     |    7 +-
 arch/arm/mach-omap1/board-fsample.c       |    6 +-
 arch/arm/mach-omap1/board-generic.c       |   24 +-
 arch/arm/mach-omap1/board-h2-mmc.c        |  110 ++++
 arch/arm/mach-omap1/board-h2.c            |  103 ++---
 arch/arm/mach-omap1/board-h3-mmc.c        |  114 ++++
 arch/arm/mach-omap1/board-h3.c            |   75 +--
 arch/arm/mach-omap1/board-innovator.c     |   19 +-
 arch/arm/mach-omap1/board-nokia770.c      |    3 +-
 arch/arm/mach-omap1/board-osk.c           |   25 +-
 arch/arm/mach-omap1/board-palmte.c        |   84 +--
 arch/arm/mach-omap1/board-palmtt.c        |   15 +-
 arch/arm/mach-omap1/board-palmz71.c       |    3 +-
 arch/arm/mach-omap1/board-perseus2.c      |    8 +-
 arch/arm/mach-omap1/board-sx1-mmc.c       |  124 +++++
 arch/arm/mach-omap1/board-sx1.c           |   64 +--
 arch/arm/mach-omap1/board-voiceblue.c     |    4 +-
 arch/arm/mach-omap1/clock.c               |    7 +-
 arch/arm/mach-omap1/leds-osk.c            |    4 +-
 arch/arm/mach-omap1/mailbox.c             |   14 +-
 arch/arm/mach-omap1/pm.c                  |   27 +-
 arch/arm/mach-omap1/sleep.S               |  161 ------
 arch/arm/mach-orion/addr-map.c            |   14 +-
 arch/arm/mach-orion/common.c              |   84 ++-
 arch/arm/mach-orion/common.h              |    8 +
 arch/arm/mach-orion/db88f5281-setup.c     |    4 +-
 arch/arm/mach-orion/dns323-setup.c        |    8 +-
 arch/arm/mach-orion/kurobox_pro-setup.c   |   17 +-
 arch/arm/mach-orion/pci.c                 |   10 +-
 arch/arm/mach-orion/rd88f5182-setup.c     |   17 +-
 arch/arm/mach-orion/ts209-setup.c         |   20 +-
 arch/arm/mach-pxa/pxa3xx.c                |   10 +-
 arch/arm/plat-omap/Makefile               |    1 +
 arch/arm/plat-omap/dma.c                  |  844 +++++++++++++++++++++++++++--
 arch/arm/plat-omap/dmtimer.c              |  118 +++-
 arch/arm/plat-omap/gpio.c                 |  256 +++++++---
 arch/arm/plat-omap/i2c.c                  |  148 +++++
 arch/arm/plat-omap/mcbsp.c                |   11 +
 arch/ia64/pci/pci.c                       |   25 +-
 arch/ia64/sn/pci/tioce_provider.c         |   16 +-
 arch/x86/kernel/quirks.c                  |    2 +-
 arch/x86/pci/common.c                     |   25 +-
 arch/x86/pci/direct.c                     |    4 +-
 arch/x86/pci/fixup.c                      |    6 +-
 arch/x86/pci/legacy.c                     |    2 +-
 arch/x86/pci/mmconfig-shared.c            |   41 +--
 arch/x86/pci/mmconfig_32.c                |   20 +-
 arch/x86/pci/mmconfig_64.c                |   18 +-
 arch/x86/pci/pci.h                        |   22 +-
 arch/x86/pci/visws.c                      |    3 -
 drivers/acpi/osl.c                        |   25 +-
 include/asm-arm/arch-omap/board-apollon.h |    2 +
 include/asm-arm/arch-omap/board-h2.h      |    3 +
 include/asm-arm/arch-omap/board-h3.h      |    2 +
 include/asm-arm/arch-omap/board-sx1.h     |    8 +-
 include/asm-arm/arch-omap/common.h        |   11 +
 include/asm-arm/arch-omap/cpu.h           |  127 ++++-
 include/asm-arm/arch-omap/dma.h           |  135 ++++--
 include/asm-arm/arch-omap/gpio.h          |    4 +
 include/asm-arm/arch-omap/irqs.h          |    2 +
 include/asm-arm/arch-omap/nand.h          |   24 +
 include/asm-arm/arch-orion/debug-macro.S  |    9 +-
 include/asm-arm/arch-orion/entry-macro.S  |    4 +-
 include/asm-arm/arch-orion/hardware.h     |   13 +-
 include/asm-arm/arch-orion/orion.h        |  102 +++--
 include/asm-arm/arch-orion/uncompress.h   |   14 +-
 include/asm-arm/arch-orion/vmalloc.h      |    2 +-
 include/linux/pci.h                       |   16 +-
 76 files changed, 2581 insertions(+), 1099 deletions(-)
 create mode 100644 arch/arm/mach-omap1/board-h2-mmc.c
 create mode 100644 arch/arm/mach-omap1/board-h3-mmc.c
 create mode 100644 arch/arm/mach-omap1/board-sx1-mmc.c
 create mode 100644 arch/arm/plat-omap/i2c.c
 create mode 100644 include/asm-arm/arch-omap/nand.h
[lenb@d975xbx2 linus (master)]$   
[lenb@d975xbx2 acpi (release)]$ git --version
git version 1.5.4.1.34.g94bf

                                                        

Re: warning: no common commits - slow pull

[Junio C Hamano]

Len Brown <lenb@kernel.org> writes:

> A couple of hours ago I pulled my reference copy of Linux tree,
> which brought the tip here:
>
> commit 7cf712db6087342e5e7e259d3883a7b5ac3212d1
> Merge: 58a14ee... 30ddb15...
> Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> Date:   Sun Feb 10 12:03:57 2008 -0800
>
>     Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
>
> Then, 10 minutes ago I did a pull to bring the head here:
>
> commit 19af35546de68c872dcb687613e0902a602cb20e
> Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> Date:   Sun Feb 10 14:18:14 2008 -0800
>
>     Linux 2.6.25-rc1
>
> But this second pull seems to have re-downloaded 172MB,
> when it should have only needed the last few commits.
>
> thanks,

Thanks.  This is very puzzling.

> [lenb@d975xbx2 linus (master)]$ git pull
> remote: Counting objects: 447, done.
> remote: Compressing objects: 100% (39/39), done.
> remote: Total 328 (delta 291), reused 325 (delta 289)

This part looks quite sane.

	$ git rev-list --objects ^7cf712d v2.6.25-rc1^0 | wc -l
	328

> Receiving objects: 100% (328/328), 60.81 KiB, done.
> Resolving deltas: 100% (291/291), completed with 97 local objects.

and the number of received objects exactly match.

> warning: no common commits

This is however very unexpected.  The sequence internally should
be doing the equivalent of:

  - fetch the objects to complete the branches we track
    (i.e. what the above "rev-list" that fetches to complete the
    commit pointed by the v2.6.25-rc1 tag based on your earlier
    tip 7cf712d);

  - store the tip (19af355 = v2.6.25-rc1^0) to the tracking
    branch;

  - run another "git fetch" to retrieve objects to complete the
    v2.6.25-rc1 tag itself, based on our available refs (which
    includes the commit 19af355).

which should result in transferring only one object, which would
say something like:

    From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
       7cf712d..19af355  master     -> linus
    remote: Counting objects: 1, done.
    remote: Total 1 (delta 0), reused 0 (delta 0)
    Unpacking objects: 100% (1/1), done.
    From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
     * [new tag]         v2.6.25-rc1 -> v2.6.25-rc1
    Updating 7cf712d..19af355

We would need a bit more digging to reproduce it, as I do not
seem to be able to.

Re: warning: no common commits - slow pull

[Theodore Tso]

On Sun, Feb 10, 2008 at 08:07:38PM -0500, Len Brown wrote:
> A couple of hours ago I pulled my reference copy of Linux tree,
> which brought the tip here:
> 
> commit 7cf712db6087342e5e7e259d3883a7b5ac3212d1
> Merge: 58a14ee... 30ddb15...
> Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> Date:   Sun Feb 10 12:03:57 2008 -0800
> 
>     Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
> 
> Then, 10 minutes ago I did a pull to bring the head here:
> 
> commit 19af35546de68c872dcb687613e0902a602cb20e
> Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> Date:   Sun Feb 10 14:18:14 2008 -0800
> 
>     Linux 2.6.25-rc1
> 
> But this second pull seems to have re-downloaded 172MB,
> when it should have only needed the last few commits.

Yeah, I have this problem very often when I push to the ext4 tree on
master.kernel.org.  Apparently the push/pull logic isn't smart about
objects are found via objects/info/alterntaes, so it will needlessly
transfer objects that it doesn't need to.

What I do to deal with this problem is I'll manually log into
master.kernel.org, and then use the command "git-update-ref
refs/heads/origin 19af35546de68c872dcb687613e0902a602cb20e", and then
go back and do the push/pull.  Once there is a head which points to the
latest from Linus, then the push/pull logic is smart and will only
download the few commitments that aren't in the local git repository
and aren't found in a shared repository.

Annoying, but as long as you have shell access on the machine with the
destination repository, you can work around it.

					- Ted

Re: warning: no common commits - slow pull

[Len Brown]

On Sunday 10 February 2008 20:53, Theodore Tso wrote:
> On Sun, Feb 10, 2008 at 08:07:38PM -0500, Len Brown wrote:
> > A couple of hours ago I pulled my reference copy of Linux tree,
> > which brought the tip here:
> > 
> > commit 7cf712db6087342e5e7e259d3883a7b5ac3212d1
> > Merge: 58a14ee... 30ddb15...
> > Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> > Date:   Sun Feb 10 12:03:57 2008 -0800
> > 
> >     Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
> > 
> > Then, 10 minutes ago I did a pull to bring the head here:
> > 
> > commit 19af35546de68c872dcb687613e0902a602cb20e
> > Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> > Date:   Sun Feb 10 14:18:14 2008 -0800
> > 
> >     Linux 2.6.25-rc1
> > 
> > But this second pull seems to have re-downloaded 172MB,
> > when it should have only needed the last few commits.
> 
> Yeah, I have this problem very often when I push to the ext4 tree on
> master.kernel.org.  Apparently the push/pull logic isn't smart about
> objects are found via objects/info/alterntaes, so it will needlessly
> transfer objects that it doesn't need to.
> 
> What I do to deal with this problem is I'll manually log into
> master.kernel.org, and then use the command "git-update-ref
> refs/heads/origin 19af35546de68c872dcb687613e0902a602cb20e", and then
> go back and do the push/pull.  Once there is a head which points to the
> latest from Linus, then the push/pull logic is smart and will only
> download the few commitments that aren't in the local git repository
> and aren't found in a shared repository.
> 
> Annoying, but as long as you have shell access on the machine with the
> destination repository, you can work around it.

yeah, I think I have see this with pushes onto kernel.org also,
but unlike Ted, I simply wait.

-Len

Re: warning: no common commits - slow pull

[Junio C Hamano]

Theodore Tso <tytso@MIT.EDU> writes:

> On Sun, Feb 10, 2008 at 08:07:38PM -0500, Len Brown wrote:
>> A couple of hours ago I pulled my reference copy of Linux tree,
>> which brought the tip here:
>> 
>> commit 7cf712db6087342e5e7e259d3883a7b5ac3212d1
>> Merge: 58a14ee... 30ddb15...
>> Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
>> Date:   Sun Feb 10 12:03:57 2008 -0800
>> 
>>     Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
>> 
>> Then, 10 minutes ago I did a pull to bring the head here:
>> 
>> commit 19af35546de68c872dcb687613e0902a602cb20e
>> Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
>> Date:   Sun Feb 10 14:18:14 2008 -0800
>> 
>>     Linux 2.6.25-rc1
>> 
>> But this second pull seems to have re-downloaded 172MB,
>> when it should have only needed the last few commits.
>
> Yeah, I have this problem very often when I push to the ext4 tree on
> master.kernel.org.  Apparently the push/pull logic isn't smart about
> objects are found via objects/info/alterntaes, so it will needlessly
> transfer objects that it doesn't need to.

I am aware of that "push" side thing (basically it does not do
the negotiation and unless you are always doing fast-forward
pushes it tends to send needless stuff), but I had an impression
that the issue Len is raising is different.  Namely if you pull
from Linus twice into the same tree you should never see that
"No common commits".

Re: warning: no common commits - slow pull

[Theodore Tso]

On Sun, Feb 10, 2008 at 06:49:11PM -0800, Junio C Hamano wrote:
> I am aware of that "push" side thing (basically it does not do
> the negotiation and unless you are always doing fast-forward
> pushes it tends to send needless stuff), but I had an impression
> that the issue Len is raising is different.  Namely if you pull
> from Linus twice into the same tree you should never see that
> "No common commits".

Yeah, when I saw your response to him I realized that.  I didn't
notice the "No common commits" message in his transcript, and assumed
he was referring to the problem I was describing.

I wouldn't mind waiting myself, but it does result in uneeded objects
in the destination repository, which I gather results in slightly more
disk load on the kernel.org servers since there's slightly less object
sharing, and sometimes I'm pushing from behind a slow link (such as an
EVDO wireless modem), and pushing the few megabytes worth of shared
objects can take a while.  So I've just always gotten in the habit of
shelling into master.kernel.org and manually doing the git-update-ref;
one of these days I'll get around to scripting it.

						- Ted

Re: warning: no common commits - slow pull

[Florian Weimer]

* Len Brown:

> But this second pull seems to have re-downloaded 172MB,
> when it should have only needed the last few commits.

I've got a linux-2.6 tree which is reasonable up to date, but which has
been created by some acient GIT version.  I see the same behavior from
time to time.  The second pull, after I've canceled the first one,
usually downloads just the expected data.

Re: warning: no common commits - slow pull

[Nix]

On 11 Feb 2008, Florian Weimer spake thusly:

> * Len Brown:
>
>> But this second pull seems to have re-downloaded 172MB,
>> when it should have only needed the last few commits.
>
> I've got a linux-2.6 tree which is reasonable up to date, but which has
> been created by some acient GIT version.  I see the same behavior from
> time to time.  The second pull, after I've canceled the first one,
> usually downloads just the expected data.

I just saw it as well, doing a big update (most of the way from 2.6.23
to current tip):

loki 214 /usr/packages/linux/linux% git pull
remote: Counting objects: 118487, done.
remote: Compressing objects: 100% (22411/22411), done.
remote: Total 102959 (delta 85610), reused 97521 (delta 80449)
Receiving objects: 100% (102959/102959), 26.41 MiB | 70 KiB/s, done.
Resolving deltas: 100% (85610/85610), completed with 7493 local objects.
warning: no common commits
remote: Counting objects: 708160, done.
remote: Compressing objects: 100% (124705/124705), done.
Receiving objects:   9% (70213/708160), 25.33 MiB | 70 KiB/s

loki 215 /usr/packages/linux/linux% ls -l .git/objects/pack
total 240224
-r--r--r-- 1 compiler hackers   2651912 2008-02-11 20:44 pack-69c40f2970403946a75203cc393ecc2b1abf8aa3.idx
-r--r--r-- 1 compiler hackers  69189104 2008-02-11 20:44 pack-69c40f2970403946a75203cc393ecc2b1abf8aa3.pack
-r--r--r-- 1 compiler hackers  14719304 2007-12-02 16:01 pack-7eb87d068cee2214e4b0c5b6b571014654cbaaa4.idx
-rw-r--r-- 1 compiler hackers         0 2007-12-06 14:45 pack-7eb87d068cee2214e4b0c5b6b571014654cbaaa4.keep
-r--r--r-- 1 compiler hackers 157916633 2007-12-02 16:01 pack-7eb87d068cee2214e4b0c5b6b571014654cbaaa4.pack
-r--r--r-- 1 compiler hackers     11744 2007-12-14 22:55 pack-993c8617968f3d44603663e4a2915ee260236f91.idx
-r--r--r-- 1 compiler hackers   1004082 2007-12-14 22:55 pack-993c8617968f3d44603663e4a2915ee260236f91.pack


Oddly enough I then halted it: I have no desire to blow an extra 160Mb
of space on duplicates of objects I've already got.

Pullng again promptly grabbed 102791 objects (i.e. prety much the same
set again) as if the pack up there at the top of the directory listing
didn't even exist. (git-repack will happily clean up the duplicates for
me, I'm sure.)

That time, it worked:

loki 216 /usr/packages/linux/linux% git pull
remote: Counting objects: 118319, done.
remote: Compressing objects: 100% (22389/22389), done.
remote: Total 102791 (delta 85463), reused 97353 (delta 80303)
Receiving objects: 100% (102791/102791), 26.39 MiB | 91 KiB/s, done.
Resolving deltas: 100% (85463/85463), completed with 7494 local objects.
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
 * [new tag]         v2.6.24    -> v2.6.24
 * [new tag]         v2.6.24-rc1 -> v2.6.24-rc1
 * [new tag]         v2.6.24-rc2 -> v2.6.24-rc2
 * [new tag]         v2.6.24-rc3 -> v2.6.24-rc3
 * [new tag]         v2.6.24-rc4 -> v2.6.24-rc4
 * [new tag]         v2.6.24-rc5 -> v2.6.24-rc5
 * [new tag]         v2.6.24-rc6 -> v2.6.24-rc6
 * [new tag]         v2.6.24-rc7 -> v2.6.24-rc7
 * [new tag]         v2.6.24-rc8 -> v2.6.24-rc8
 * [new tag]         v2.6.25-rc1 -> v2.6.25-rc1
[...]

This is with git version 1.5.4.25.g7f255-dirty. (only local changes are
some makefile tweaks).

I've never seen this failure before with any earlier git version, but
that might just be coincidence.

-- 
`The rest is a tale of post and counter-post.' --- Ian Rawlings
                                                   describes USENET

Re: warning: no common commits - slow pull

[Len Brown]

it happened again.

this morning I pulled linus' tree up through 
4ee29f6a52158cea526b16a44ae38643946103ec

then during the day, linus declared "rc2".

and now I pulled linus' tree again,
which has a HEAD now of 

101142c37be8e5af9b847860219217e6b958c739

and the pull sucked down 172 MB even though the uncompressed
diff between the two is 0.3 MB.

-Len

[lenb@d975xbx2 linus (master)]$ git pull
remote: Counting objects: 649, done.
remote: Compressing objects: 100% (106/106), done.
remote: Total 513 (delta 417), reused 503 (delta 407)
Receiving objects: 100% (513/513), 116.67 KiB, done.
Resolving deltas: 100% (417/417), completed with 103 local objects.
warning: no common commits
remote: Counting objects: 710725, done.
remote: Compressing objects: 100% (125738/125738), done.
remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
Resolving deltas: 100% (589584/589584), done.
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
 * [new tag]         v2.6.25-rc2 -> v2.6.25-rc2
Updating 4ee29f6..101142c
Fast forward
 Makefile                               |    4 +-
 drivers/bluetooth/hci_ldisc.c          |    1 +
 drivers/net/8139too.c                  |    2 +-
 drivers/net/Kconfig                    |   18 +
 drivers/net/Makefile                   |    3 +-
 drivers/net/cxgb3/l2t.c                |    2 +-
 drivers/net/cxgb3/sge.c                |   35 +-
 drivers/net/dm9000.c                   |  654 +++++---
 drivers/net/e1000/e1000_main.c         |   18 +-
 drivers/net/forcedeth.c                |  132 +-
 drivers/net/netconsole.c               |    4 +-
 drivers/net/ni52.c                     | 1142 +++++++-------
 drivers/net/ni52.h                     |  158 +-
 drivers/net/pcnet32.c                  |   48 +-
 drivers/net/phy/fixed.c                |    4 +-
 drivers/net/ps3_gelic_net.c            | 1215 ++++++++------
 drivers/net/ps3_gelic_net.h            |  415 ++++--
 drivers/net/ps3_gelic_wireless.c       | 2753 ++++++++++++++++++++++++++++++++
 drivers/net/ps3_gelic_wireless.h       |  329 ++++
 drivers/net/r6040.c                    |  233 ++--
 drivers/net/sis190.c                   |    3 +-
 drivers/s390/net/claw.h                |   19 +-
 drivers/s390/net/lcs.c                 |    2 +-
 drivers/s390/net/lcs.h                 |   16 +-
 drivers/s390/net/netiucv.c             |   29 +-
 fs/compat.c                            |    3 -
 fs/nfs/callback.c                      |   18 +-
 fs/nfs/dir.c                           |    8 +-
 fs/nfs/nfs4state.c                     |    4 +-
 fs/nfs/super.c                         |    4 +
 include/linux/dm9000.h                 |    2 +
 include/linux/netdevice.h              |    8 +-
 include/net/ax25.h                     |    2 +
 include/net/ndisc.h                    |    1 -
 include/net/xfrm.h                     |    5 +-
 net/ax25/af_ax25.c                     |   12 +-
 net/ax25/ax25_dev.c                    |    2 +-
 net/ax25/ax25_ds_timer.c               |   12 +-
 net/ax25/ax25_route.c                  |   28 +-
 net/ax25/ax25_timer.c                  |   60 +-
 net/core/dev.c                         |    4 +-
 net/core/neighbour.c                   |   12 +-
 net/core/rtnetlink.c                   |   36 +-
 net/core/skbuff.c                      |    3 +-
 net/ipv4/ah4.c                         |    2 +-
 net/ipv4/arp.c                         |    3 -
 net/ipv4/esp4.c                        |    5 +-
 net/ipv4/fib_trie.c                    |   99 +-
 net/ipv4/inet_hashtables.c             |    3 -
 net/ipv4/ip_sockglue.c                 |    5 -
 net/ipv6/ah6.c                         |    2 +-
 net/ipv6/esp6.c                        |    5 +-
 net/ipv6/ip6_output.c                  |    6 +-
 net/ipv6/xfrm6_output.c                |    2 +-
 net/key/af_key.c                       |    1 +
 net/netfilter/nf_conntrack_proto_tcp.c |    2 +-
 net/netfilter/xt_SECMARK.c             |    2 +-
 net/netlabel/netlabel_domainhash.c     |    6 +-
 net/netlabel/netlabel_unlabeled.c      |   30 +-
 net/netlabel/netlabel_user.c           |    3 +-
 net/netlink/genetlink.c                |    6 +-
 net/socket.c                           |    3 +
 net/xfrm/Kconfig                       |    2 +-
 net/xfrm/xfrm_input.c                  |    4 +-
 net/xfrm/xfrm_output.c                 |    2 +-
 net/xfrm/xfrm_user.c                   |    1 +
 66 files changed, 5686 insertions(+), 1971 deletions(-)
 create mode 100644 drivers/net/ps3_gelic_wireless.c
 create mode 100644 drivers/net/ps3_gelic_wireless.h
[lenb@d975xbx2 linus (master)]$            
[lenb@d975xbx2 linus (master)]$ git --version
git version 1.5.4.1.122.gaa8d
                

Re: warning: no common commits - slow pull

[Johannes Schindelin]

Hi,

On Fri, 15 Feb 2008, Len Brown wrote:

> [lenb@d975xbx2 linus (master)]$ git pull
> remote: Counting objects: 649, done.
> remote: Compressing objects: 100% (106/106), done.
> remote: Total 513 (delta 417), reused 503 (delta 407)
> Receiving objects: 100% (513/513), 116.67 KiB, done.
> Resolving deltas: 100% (417/417), completed with 103 local objects.
> warning: no common commits
> remote: Counting objects: 710725, done.
> remote: Compressing objects: 100% (125738/125738), done.
> remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
> Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
> Resolving deltas: 100% (589584/589584), done.
> >From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
>  * [new tag]         v2.6.25-rc2 -> v2.6.25-rc2

Now, this is funny.  Apparently, everything worked fine for the master 
branch (I suppose it is the master branch, anyway), but went wrong for 
fetching the _tag_.

> [lenb@d975xbx2 linus (master)]$ git --version
> git version 1.5.4.1.122.gaa8d

I do not have that git version, but something is fishy there, so I guess 
it depends on your particular version.

Ciao,
Dscho

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Sun, 10 Feb 2008, Junio C Hamano wrote:

> Len Brown <lenb@kernel.org> writes:
> 
> > A couple of hours ago I pulled my reference copy of Linux tree,
> > which brought the tip here:
> >
> > commit 7cf712db6087342e5e7e259d3883a7b5ac3212d1
> > Merge: 58a14ee... 30ddb15...
> > Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> > Date:   Sun Feb 10 12:03:57 2008 -0800
> >
> >     Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
> >
> > Then, 10 minutes ago I did a pull to bring the head here:
> >
> > commit 19af35546de68c872dcb687613e0902a602cb20e
> > Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
> > Date:   Sun Feb 10 14:18:14 2008 -0800
> >
> >     Linux 2.6.25-rc1
> >
> > But this second pull seems to have re-downloaded 172MB,
> > when it should have only needed the last few commits.
> >
> > thanks,
> 
> Thanks.  This is very puzzling.
> 
> > [lenb@d975xbx2 linus (master)]$ git pull
> > remote: Counting objects: 447, done.
> > remote: Compressing objects: 100% (39/39), done.
> > remote: Total 328 (delta 291), reused 325 (delta 289)
> 
> This part looks quite sane.
> 
> 	$ git rev-list --objects ^7cf712d v2.6.25-rc1^0 | wc -l
> 	328
> 
> > Receiving objects: 100% (328/328), 60.81 KiB, done.
> > Resolving deltas: 100% (291/291), completed with 97 local objects.
> 
> and the number of received objects exactly match.
> 
> > warning: no common commits
> 
> This is however very unexpected.  The sequence internally should
> be doing the equivalent of:
> 
>   - fetch the objects to complete the branches we track
>     (i.e. what the above "rev-list" that fetches to complete the
>     commit pointed by the v2.6.25-rc1 tag based on your earlier
>     tip 7cf712d);
> 
>   - store the tip (19af355 = v2.6.25-rc1^0) to the tracking
>     branch;
> 
>   - run another "git fetch" to retrieve objects to complete the
>     v2.6.25-rc1 tag itself, based on our available refs (which
>     includes the commit 19af355).

I wonder if the problem is that something isn't getting reinitialized for 
the second connection. It's not a separate invocation of fetch-pack, and I 
can't say for sure that it's sending the right info to the server when the 
statics in builtin-fetch-pack.c are left over from the earlier call. This 
would particularly explain the information that hitting ctrl-c and trying 
again fixes it.

I don't really know the builtin-fetch-pack code all that well, but I'll 
see if I can reproduce the problem and if I can figure out anything 
obviously wrong.

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Johannes Schindelin]

Hi,

On Sat, 16 Feb 2008, Daniel Barkalow wrote:

> I wonder if the problem is that something isn't getting reinitialized 
> for the second connection. It's not a separate invocation of fetch-pack, 
> and I can't say for sure that it's sending the right info to the server 
> when the statics in builtin-fetch-pack.c are left over from the earlier 
> call. This would particularly explain the information that hitting 
> ctrl-c and trying again fixes it.

Oh, that should be it!  After all, the code in get_rev() in 
builtin-fetch-pack.c marks commits as SEEN and COMMON and POPPED.

So I guess you'd need to set something like

	struct commit_list *rev_list_orig;
	...
	rev_list_orig = rev_list;

before

        while ((sha1 = get_rev())) {

in the function find_common(), and then, after the while() loop, do 
something like

	while (rev_list_orig) {
		clear_commit_marks(rev_list->item,
			COMPLETE | COMMON | COMMON_REF | SEEN | POPPED);
		rev_list_orig = rev_list_orig->next;
	}

possibly free()ing the rev_lists in the process.

Ciao,
Dscho

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Sun, 17 Feb 2008, Johannes Schindelin wrote:

> Hi,
> 
> On Sat, 16 Feb 2008, Daniel Barkalow wrote:
> 
> > I wonder if the problem is that something isn't getting reinitialized 
> > for the second connection. It's not a separate invocation of fetch-pack, 
> > and I can't say for sure that it's sending the right info to the server 
> > when the statics in builtin-fetch-pack.c are left over from the earlier 
> > call. This would particularly explain the information that hitting 
> > ctrl-c and trying again fixes it.
> 
> Oh, that should be it!  After all, the code in get_rev() in 
> builtin-fetch-pack.c marks commits as SEEN and COMMON and POPPED.
> 
> So I guess you'd need to set something like
> 
> 	struct commit_list *rev_list_orig;
> 	...
> 	rev_list_orig = rev_list;
> 
> before
> 
>         while ((sha1 = get_rev())) {
> 
> in the function find_common(), and then, after the while() loop, do 
> something like
> 
> 	while (rev_list_orig) {
> 		clear_commit_marks(rev_list->item,
> 			COMPLETE | COMMON | COMMON_REF | SEEN | POPPED);
> 		rev_list_orig = rev_list_orig->next;
> 	}
> 
> possibly free()ing the rev_lists in the process.

What's currently confusing me, which is probably why I haven't been able 
to reproduce the problem, is how we don't have the newly-received commits 
as still interesting. Clearly there's some way to end up with them 
either not being applicable or being already marked, but I'm not seeing 
it.

(There's a good change that we could fix the problem with your loop, but 
I'd like to have a test case to make sure it's fixed and stays fixed)

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Junio C Hamano]

Johannes Schindelin <Johannes.Schindelin@gmx.de> writes:

> On Sat, 16 Feb 2008, Daniel Barkalow wrote:
>
>> I wonder if the problem is that something isn't getting reinitialized 
>> for the second connection. It's not a separate invocation of fetch-pack, 
>> and I can't say for sure that it's sending the right info to the server 
>> when the statics in builtin-fetch-pack.c are left over from the earlier 
>> call. This would particularly explain the information that hitting 
>> ctrl-c and trying again fixes it.
>
> Oh, that should be it!  After all, the code in get_rev() in 
> builtin-fetch-pack.c marks commits as SEEN and COMMON and POPPED.

I seem to be slow today, but how does that explain that the
problem is reported only by Len so far?

Re: warning: no common commits - slow pull

[Johannes Schindelin]

Hi,

On Sun, 17 Feb 2008, Junio C Hamano wrote:

> Johannes Schindelin <Johannes.Schindelin@gmx.de> writes:
> 
> > On Sat, 16 Feb 2008, Daniel Barkalow wrote:
> >
> >> I wonder if the problem is that something isn't getting reinitialized 
> >> for the second connection. It's not a separate invocation of 
> >> fetch-pack, and I can't say for sure that it's sending the right info 
> >> to the server when the statics in builtin-fetch-pack.c are left over 
> >> from the earlier call. This would particularly explain the 
> >> information that hitting ctrl-c and trying again fixes it.
> >
> > Oh, that should be it!  After all, the code in get_rev() in 
> > builtin-fetch-pack.c marks commits as SEEN and COMMON and POPPED.
> 
> I seem to be slow today, but how does that explain that the problem is 
> reported only by Len so far?

Hmm.  The code I was referencing is only in "next" so far, right?  And 
AFAICT it only occurs when you are fetching something which autofetches 
tags, right?

But thinking about this again: do we reuse the connection also for 
automatic tag fetching?  If not, my whole reasoning is wrong.

Ciao,
Dscho

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Sun, 17 Feb 2008, Johannes Schindelin wrote:

> Hi,
> 
> On Sun, 17 Feb 2008, Junio C Hamano wrote:
> 
> > Johannes Schindelin <Johannes.Schindelin@gmx.de> writes:
> > 
> > > On Sat, 16 Feb 2008, Daniel Barkalow wrote:
> > >
> > >> I wonder if the problem is that something isn't getting reinitialized 
> > >> for the second connection. It's not a separate invocation of 
> > >> fetch-pack, and I can't say for sure that it's sending the right info 
> > >> to the server when the statics in builtin-fetch-pack.c are left over 
> > >> from the earlier call. This would particularly explain the 
> > >> information that hitting ctrl-c and trying again fixes it.
> > >
> > > Oh, that should be it!  After all, the code in get_rev() in 
> > > builtin-fetch-pack.c marks commits as SEEN and COMMON and POPPED.
> > 
> > I seem to be slow today, but how does that explain that the problem is 
> > reported only by Len so far?
> 
> Hmm.  The code I was referencing is only in "next" so far, right?  And 
> AFAICT it only occurs when you are fetching something which autofetches 
> tags, right?

I think the code you referenced is quite old; the new thing is having it 
called twice in the same process, and that's also in "master" along with 
builtin-fetch, I think.

> But thinking about this again: do we reuse the connection also for 
> automatic tag fetching?  If not, my whole reasoning is wrong.

No, the way the protocol works, you can't request more stuff after you've 
received stuff on a connection, so we have to start a second one for that 
case.

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Florian Weimer]

* Len Brown:

> [lenb@d975xbx2 linus (master)]$ git pull
> remote: Counting objects: 649, done.
> remote: Compressing objects: 100% (106/106), done.
> remote: Total 513 (delta 417), reused 503 (delta 407)
> Receiving objects: 100% (513/513), 116.67 KiB, done.
> Resolving deltas: 100% (417/417), completed with 103 local objects.
> warning: no common commits
> remote: Counting objects: 710725, done.
> remote: Compressing objects: 100% (125738/125738), done.
> remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
> Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
> Resolving deltas: 100% (589584/589584), done.
>>From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Same here, but on a slow DSL line, so I had to hit ^C:

fw@deneb:~/src/linux/linux-2.6$ git pull
remote: Counting objects: 94176, done.
remote: Compressing objects: 100% (17486/17486), done.
remote: Total 83287 (delta 70429), reused 78218 (delta 65712)
Receiving objects: 100% (83287/83287), 18.66 MiB | 478 KiB/s, done.
Resolving deltas: 100% (70429/70429), completed with 7457 local objects.
warning: no common commits
remote: Counting objects: 53267
^C

This is Debian's 1:1.5.4.2-2 GIT version.

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Mon, 25 Feb 2008, Florian Weimer wrote:

> * Len Brown:
> 
> > [lenb@d975xbx2 linus (master)]$ git pull
> > remote: Counting objects: 649, done.
> > remote: Compressing objects: 100% (106/106), done.
> > remote: Total 513 (delta 417), reused 503 (delta 407)
> > Receiving objects: 100% (513/513), 116.67 KiB, done.
> > Resolving deltas: 100% (417/417), completed with 103 local objects.
> > warning: no common commits
> > remote: Counting objects: 710725, done.
> > remote: Compressing objects: 100% (125738/125738), done.
> > remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
> > Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
> > Resolving deltas: 100% (589584/589584), done.
> >>From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
> 
> Same here, but on a slow DSL line, so I had to hit ^C:
> 
> fw@deneb:~/src/linux/linux-2.6$ git pull
> remote: Counting objects: 94176, done.
> remote: Compressing objects: 100% (17486/17486), done.
> remote: Total 83287 (delta 70429), reused 78218 (delta 65712)
> Receiving objects: 100% (83287/83287), 18.66 MiB | 478 KiB/s, done.
> Resolving deltas: 100% (70429/70429), completed with 7457 local objects.
> warning: no common commits
> remote: Counting objects: 53267
> ^C

Can you try making backups before pulling and see if you can get a 
reproducable case? I haven't been able to arrange to have it happen to me, 
and once it happens, it's changed the state of the repository such that it 
won't happen again immediately. I found something suspicious at some 
point, and suggested a possible fix, but it's impossible to tell if it's 
actually resolved without a test case.

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Len Brown]

On Friday 15 February 2008, Len Brown wrote:
> it happened again.
> 
> this morning I pulled linus' tree up through 
> 4ee29f6a52158cea526b16a44ae38643946103ec
> 
> then during the day, linus declared "rc2".
> 
> and now I pulled linus' tree again,
> which has a HEAD now of 
> 
> 101142c37be8e5af9b847860219217e6b958c739
> 
> and the pull sucked down 172 MB even though the uncompressed
> diff between the two is 0.3 MB.
> 
> -Len
> 
> [lenb@d975xbx2 linus (master)]$ git pull
> remote: Counting objects: 649, done.
> remote: Compressing objects: 100% (106/106), done.
> remote: Total 513 (delta 417), reused 503 (delta 407)
> Receiving objects: 100% (513/513), 116.67 KiB, done.
> Resolving deltas: 100% (417/417), completed with 103 local objects.
> warning: no common commits
> remote: Counting objects: 710725, done.
> remote: Compressing objects: 100% (125738/125738), done.
> remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
> Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
> Resolving deltas: 100% (589584/589584), done.
> From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
>  * [new tag]         v2.6.25-rc2 -> v2.6.25-rc2
> Updating 4ee29f6..101142c
> Fast forward
>  Makefile                               |    4 +-
...
> [lenb@d975xbx2 linus (master)]$            
> [lenb@d975xbx2 linus (master)]$ git --version
> git version 1.5.4.1.122.gaa8d

It still happens with latest git. (linus has declared -rc3 this time)
unfortunately for me, i'm not on broadband this time so it is extremely painful --
to the point that i simply can't update this tree until i get home.

I started at 4fa2b1cde0e3797549f711ce9e51c395b3d6d2a7
and Linus' tree is at 7704a8b6fc4a8f51599eb2af4dcf1e2ac9c7e576

The diff between these commits is about 100KB uncompressed, but it seems
that I'm pulling down 175MB again...

remote: Counting objects: 661, done.
remote: Compressing objects: 100% (139/139), done.
remote: Total 501 (delta 411), reused 443 (delta 362)
Receiving objects: 100% (501/501), 73.89 KiB | 11 KiB/s, done.
Resolving deltas: 100% (411/411), completed with 101 local objects.
warning: no common commits
remote: Counting objects: 714841, done.
remote: Compressing objects: 100% (127590/127590), done.
Receiving objects:   1% (11116/714841), 3.96 MiB | 5 KiB/s

[lenb@t61 ~]$ git --version
git version 1.5.4.3.230.g2db511

Re: warning: no common commits - slow pull

[Nicolas Pitre]

On Tue, 26 Feb 2008, Len Brown wrote:

> On Friday 15 February 2008, Len Brown wrote:
> > it happened again.
> > 
> > this morning I pulled linus' tree up through 
> > 4ee29f6a52158cea526b16a44ae38643946103ec
> > 
> > then during the day, linus declared "rc2".
> > 
> > and now I pulled linus' tree again,
> > which has a HEAD now of 
> > 
> > 101142c37be8e5af9b847860219217e6b958c739
> > 
> > and the pull sucked down 172 MB even though the uncompressed
> > diff between the two is 0.3 MB.
> > 
> > -Len
> > 
> > [lenb@d975xbx2 linus (master)]$ git pull
> > remote: Counting objects: 649, done.
> > remote: Compressing objects: 100% (106/106), done.
> > remote: Total 513 (delta 417), reused 503 (delta 407)
> > Receiving objects: 100% (513/513), 116.67 KiB, done.
> > Resolving deltas: 100% (417/417), completed with 103 local objects.
> > warning: no common commits
> > remote: Counting objects: 710725, done.
> > remote: Compressing objects: 100% (125738/125738), done.
> > remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
> > Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
> > Resolving deltas: 100% (589584/589584), done.
> > From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
> >  * [new tag]         v2.6.25-rc2 -> v2.6.25-rc2
> > Updating 4ee29f6..101142c
> > Fast forward
> >  Makefile                               |    4 +-
> ...
> > [lenb@d975xbx2 linus (master)]$            
> > [lenb@d975xbx2 linus (master)]$ git --version
> > git version 1.5.4.1.122.gaa8d
> 
> It still happens with latest git. (linus has declared -rc3 this time)

So it happens everytime a new tag is fetched.

> unfortunately for me, i'm not on broadband this time so it is extremely painful --
> to the point that i simply can't update this tree until i get home.

What happens if you restart the pull after interrupting the first 
attempt?


Nicolas

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Tue, 26 Feb 2008, Len Brown wrote:

> On Friday 15 February 2008, Len Brown wrote:
> > it happened again.
> > 
> > this morning I pulled linus' tree up through 
> > 4ee29f6a52158cea526b16a44ae38643946103ec
> > 
> > then during the day, linus declared "rc2".
> > 
> > and now I pulled linus' tree again,
> > which has a HEAD now of 
> > 
> > 101142c37be8e5af9b847860219217e6b958c739
> > 
> > and the pull sucked down 172 MB even though the uncompressed
> > diff between the two is 0.3 MB.
> > 
> > -Len
> > 
> > [lenb@d975xbx2 linus (master)]$ git pull
> > remote: Counting objects: 649, done.
> > remote: Compressing objects: 100% (106/106), done.
> > remote: Total 513 (delta 417), reused 503 (delta 407)
> > Receiving objects: 100% (513/513), 116.67 KiB, done.
> > Resolving deltas: 100% (417/417), completed with 103 local objects.
> > warning: no common commits
> > remote: Counting objects: 710725, done.
> > remote: Compressing objects: 100% (125738/125738), done.
> > remote: Total 710725 (delta 589584), reused 704450 (delta 584029)
> > Receiving objects: 100% (710725/710725), 172.71 MiB | 1073 KiB/s, done.
> > Resolving deltas: 100% (589584/589584), done.
> > From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
> >  * [new tag]         v2.6.25-rc2 -> v2.6.25-rc2
> > Updating 4ee29f6..101142c
> > Fast forward
> >  Makefile                               |    4 +-
> ...
> > [lenb@d975xbx2 linus (master)]$            
> > [lenb@d975xbx2 linus (master)]$ git --version
> > git version 1.5.4.1.122.gaa8d
> 
> It still happens with latest git. (linus has declared -rc3 this time)
> unfortunately for me, i'm not on broadband this time so it is extremely painful --
> to the point that i simply can't update this tree until i get home.

The workaround, so far as I know, is to hit ^C and do it again; the second 
time it will fetch 1 object (the actual tag) instead of 700000. If that's 
not the case, I'm even more confused about what's going on. And if you 
notice Linux tagging something before you pull, it would be great if you 
could capture the contents of .git/refs/ before you pull and send it to me 
if it does this.

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Junio C Hamano]

Len Brown <lenb@kernel.org> writes:

>> From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
>>  * [new tag]         v2.6.25-rc2 -> v2.6.25-rc2
>> Updating 4ee29f6..101142c
>> Fast forward
>>  Makefile                               |    4 +-
> ...
>> [lenb@d975xbx2 linus (master)]$            
>> [lenb@d975xbx2 linus (master)]$ git --version
>> git version 1.5.4.1.122.gaa8d
>
> It still happens with latest git. (linus has declared -rc3 this time)

That's because nobody has touched anything in this area since your
last report.

But I now have a theory.

Next time this happens, could you run ls-remote for all four git
servers and compare them?

    $ LINUS=kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
    $ for i in 1 2 3 4; do git ls-remote git://git$i.$LINUS >git$i.txt; done

If my theory is correct, a workaround would be not to fetch from
git://git.kernel.org/ but from git://git$i.kernel.org/ for some value
of $i.

Now to the theory part.

Suppose the ancestry is like this:

         o (rc2)             o (rc3)
        /                   /
    ---A---o---o---o---o---B---o---o---o---C

And the event sequence is:

 (0) You are in sync with rc2 (have commits up to "A" and tag
     rc2);

 (1) Linus builds up to "B", tags rc3, pushes out to the master;

 (2) git1 and git2 mirror that history;

 (3) Linus builds up to "C", pushes out to the master;

 (4) git1 gets "C" but git2 mirror lags behind;

 (5) You fetch, which happens to first go to git1; you get "C"
     and learn that rc3 points at "B" that is locally reachable,
     but you do not have rc3 tag itself yet.  So git-fetch
     auto-follows (i.e. asks for "rc3" tag);

 (6) However, that goes over a separate connection, and you
     happen to hit git2, which does have "B" and rc3, but it
     does not have "C" yet.

 (7) You tell the other end "Hey, I have C", which git2 does not
     understand, because it hasn't seen the commit through the
     mirroring system yet.

Now, even if we are in the above situation, things _ought_ to work
(and I strongly suspect that the scripted git-fetch did work
correctly).  git2 would say "You have "C"?  I dunno that one, but keep
talking", and you will keep sending "I have this, this, this,...",
walking the ancestry chain down from C.  When you say "I also have B",
it would say "Aha, Ok, I heard enough to tell that rc3 tag is the only
thing I need to send to you".

However, if the current version of git-fetch has a bug in the
negotiation code when it auto-follows tags, that could throw this
conversation to compute what's common way off, and that is what I
suspect is happening.

For example, I notice that the list of old refs is reused (kept in the
transport structure) when it reconnects to a different instance of
git-upload-pack to auto-follow the tags, and never refreshed from the
actual remote end you are talking with.

This stale list of refs is passed all the way down to fetch_pack(),
representing _your_ idea of what they said they have, which does not
match the reality if you are connecting to a different host (via DNS
round robin).  Even if there is no DNS round robin issue, if an update
happened on the host between the time you fetched the refs from there
and you started a different instance of git-upload-pack for auto
follow the tags, the issue is the same (if you re-read the list of
refs from the new instance of upload-pack, you should be Ok, as the
upload-pack on the other end should be internally consistent).

Another possibile problem area I did not check is if the current
git-fetch takes care of clearing various mark bits used and left by
find_common() and get_rev() in builtin-fetch-pack.c during the main
transfer, before it initiates another round to auto follow the tags.
When we wrote fetch-pack the first time, we did not design it (most
importantly, find_common()) to be callable more than once, as cleaning
them was unnecessary overhead for the call-once-and-exit program.

The attached stops the stale set of refs from being used for common
ancestry computation.  It may or may not fix your issue, but at least
it should be more correct than what we currently have, I think.

diff --git a/builtin-fetch.c b/builtin-fetch.c
index ac335f2..c7cdd42 100644
--- a/builtin-fetch.c
+++ b/builtin-fetch.c
@@ -544,9 +544,16 @@ static int do_fetch(struct transport *transport,
 
 	fetch_map = ref_map;
 
-	/* if neither --no-tags nor --tags was specified, do automated tag
-	 * following ... */
+	/*
+	 * If neither --no-tags nor --tags was specified, do automated tag
+	 * following.
+	 */
 	if (tags == TAGS_DEFAULT && autotags) {
+		if (transport->remote_refs) {
+			struct ref *stale = (struct ref *)transport->remote_refs;
+			free_refs(stale);
+			transport->remote_refs = NULL;
+		}
 		ref_map = find_non_local_tags(transport, fetch_map);
 		if (ref_map) {
 			transport_set_option(transport, TRANS_OPT_DEPTH, "0");

Re: warning: no common commits - slow pull

[Junio C Hamano]

Updates.

I seem to have a reliable reproduction script, for this issue.

After rebuilding your git with the following patch, running
the test script ./t000.sh would exhibit that "no common refs"
while following the tag.

Then rebuild your git with "#if 0" part enabled, and run the
test again, to see the problem fixed.

This adds --autofollow option which is _purely_ for debugging
this issue.  The command named by the option is executed after
the command finishes the main transfer but before it starts the
second transfer to auto follow the tags.

The test prepares two repositories (src0.git and src1.git) to
simulate DNS round robin server side.  src0.git grows, src1.git
mirrors it with a bit of lag.  src.git is a symlink that is used
to simulate DNS round robin.  Initially it points at src0.git
(more up-to-date one) and a clone to Len (dst.git) is made.
After src0.git grows history while src1.git mirrors it with a
lag, Len fetches again, first from src0.git but autofollowing
connection goes to src1.git.

While I was futzing with the test script, I also observed
another error message "fatal: not our ref", but that was before
I fixed the commit traversal order by giving them the test_tick
timestamps.  It won't reproduce with the attached test script,
but the patch also seemed to fix it.

---

 builtin-fetch.c |   12 +++++++
 t000.sh         |   95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 107 insertions(+), 0 deletions(-)

diff --git a/builtin-fetch.c b/builtin-fetch.c
index ac335f2..79359ac 100644
--- a/builtin-fetch.c
+++ b/builtin-fetch.c
@@ -28,6 +28,7 @@ static const char *depth;
 static const char *upload_pack;
 static struct strbuf default_rla = STRBUF_INIT;
 static struct transport *transport;
+static char *autofollow;
 
 static struct option builtin_fetch_options[] = {
 	OPT__QUIET(&quiet),
@@ -45,6 +46,8 @@ static struct option builtin_fetch_options[] = {
 		    "allow updating of HEAD ref"),
 	OPT_STRING(0, "depth", &depth, "DEPTH",
 		   "deepen history of shallow clone"),
+	OPT_STRING(0, "autofollow", &autofollow, "COMMAND",
+		   "call the command just before autofollowing"),
 	OPT_END()
 };
 
@@ -547,6 +550,15 @@ static int do_fetch(struct transport *transport,
 	/* if neither --no-tags nor --tags was specified, do automated tag
 	 * following ... */
 	if (tags == TAGS_DEFAULT && autotags) {
+		if (autofollow)
+			system(autofollow);
+#if 0
+		if (transport->remote_refs) {
+			struct ref *stale = (struct ref *)transport->remote_refs;
+			free_refs(stale);
+			transport->remote_refs = NULL;
+		}
+#endif
 		ref_map = find_non_local_tags(transport, fetch_map);
 		if (ref_map) {
 			transport_set_option(transport, TRANS_OPT_DEPTH, "0");
diff --git a/t000.sh b/t000.sh
new file mode 100644
index 0000000..e2c35d1
--- /dev/null
+++ b/t000.sh
@@ -0,0 +1,95 @@
+#!/bin/sh
+
+GIT_EXEC_PATH=`pwd`
+PATH=`pwd`:/usr/bin:/bin
+GITPERLLIB=`pwd`/perl/blib/lib
+export GIT_EXEC_PATH PATH GITPERLLIB
+
+testdir=/var/tmp/fetch-test
+mkdir -p "$testdir"
+
+cd "$testdir" || exit
+test_tick=1112911993
+
+grow () {
+	j_bottom="$1" j_top="$2" i_top="$3" tagit="$4"
+	j="$j_bottom"
+	while test "$j" -le "$j_top"
+	do
+		i=1
+		while test "$i" -le "$i_top"
+		do
+			echo "$j.$i" >f
+			git add f
+			test_tick=$(($test_tick + 60))
+			GIT_COMMITTER_DATE="$test_tick -0700" \
+			git commit -q -m "$j.$i"
+			i=$(($i + 1))
+		done
+		if test -n "$tagit"
+		then
+			git tag -a -m "Tag $j" v$j
+		fi
+		j=$(($j + 1))
+	done
+}
+
+rm -fr src0.git src1.git dst.git
+
+# Prepare the very original.  Pretend this is Linus
+mkdir src0.git
+cd src0.git
+git init
+grow 1 5 4 1
+cd ..
+
+# Prepare a "mirror" that slightly lags behind.
+mkdir src1.git
+cd src1.git
+GIT_DIR=. git init
+git remote add -f --mirror origin ../src0.git/
+cd ..
+
+# Prepare canonical symlink
+rm -f src.git && ln -s src0.git src.git
+
+# Len clones and works
+git clone file://$testdir/src.git/ dst.git
+cd dst.git
+grow 1 1 200
+cd ..
+
+# Linus works more.
+cd src0.git
+grow 6 7 4 1
+cd ..
+
+# Mirror it out
+cd src1.git
+git fetch
+cd ..
+
+# Linus works further.
+cd src0.git
+grow 8 8 1
+cd ..
+
+# Prepare "switch" script
+echo >auto-switch.sh '#!/bin/sh
+cd "'$testdir'"
+case "$(ls -l src.git)" in
+*src0.git*)	new=src1.git ;;
+*src1.git*)	new=src0.git ;;
+esac
+echo "Auto switching to $new"
+rm -f src.git && ln -s "$new" src.git'
+chmod +x auto-switch.sh
+
+# Now Len fetches; the first goes to src0 (up-to-date one) but
+# the autofollow goes to src1 (more stale one)
+
+rm -f src.git && ln -s src0.git src.git
+
+cd dst.git
+git-fetch -v --autofollow="$testdir/auto-switch.sh"
+

Re: warning: no common commits - slow pull

[Daniel Barkalow]

Correcting the transport code is important (and should probably be done in 
transport.c, if possible), but I think we're being a bit silly in 
autofollowing tags anyway. If we decide to fetch T due to having T^{}, we 
should tell the remote up front that we have T^{}, before we mention 
anything else, because it's obviously true and it's also absolutely 
certain to make the remote immediately do the right thing. It's silly to 
decide to fetch T because we will only need that one object, and then not 
instantly tell the server we only need that one object. (And, as luck 
would have it, yesterday I wrote code to cause for_each_ref return some
specific values in addition to and before the actual stored refs.)

Of course, we shouldn't do this until we make the transport code more 
correct, because it's certain to hide any possible bug there.

Am I missing something in my analysis?

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Junio C Hamano]

Daniel Barkalow <barkalow@iabervon.org> writes:

> Correcting the transport code is important (and should probably be done in 
> transport.c, if possible), but I think we're being a bit silly in 
> autofollowing tags anyway. If we decide to fetch T due to having T^{}, we 
> should tell the remote up front that we have T^{}, before we mention 
> anything else, because it's obviously true and it's also absolutely 
> certain to make the remote immediately do the right thing.

That's correct, and the autofollowing code does so.  You will
not know if you have T^{} until your primary transfer finishes,
so you cannot roll autofollow into it.

I think we can teach the upload-pack side to be more helpful and
with a protocol extension to send tag objects that are pointing
at commits that will be included in the result, or something
like that, though.  But that is outside the scope of 1.5.5; it
would be a moderate to large protocol surgery, and I suspect it
might even have to affect pack-objects.

> It's silly to 
> decide to fetch T because we will only need that one object, and then not 
> instantly tell the server we only need that one object. (And, as luck 
> would have it, yesterday I wrote code to cause for_each_ref return some
> specific values in addition to and before the actual stored refs.)

You won't know if you need only one object, so seeing that you
have T^{} and asking _only_ for T is _wrong_.  Think of a tag
that points at another tag that points at the commit.  You need
to tell the other end "I have T^{}, please give me T", and that
is exactly what the autofollowing does.

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Wed, 27 Feb 2008, Junio C Hamano wrote:

> Daniel Barkalow <barkalow@iabervon.org> writes:
> 
> > Correcting the transport code is important (and should probably be done in 
> > transport.c, if possible), but I think we're being a bit silly in 
> > autofollowing tags anyway. If we decide to fetch T due to having T^{}, we 
> > should tell the remote up front that we have T^{}, before we mention 
> > anything else, because it's obviously true and it's also absolutely 
> > certain to make the remote immediately do the right thing.
> 
> That's correct, and the autofollowing code does so.  You will
> not know if you have T^{} until your primary transfer finishes,
> so you cannot roll autofollow into it.
> 
> I think we can teach the upload-pack side to be more helpful and
> with a protocol extension to send tag objects that are pointing
> at commits that will be included in the result, or something
> like that, though.  But that is outside the scope of 1.5.5; it
> would be a moderate to large protocol surgery, and I suspect it
> might even have to affect pack-objects.

Using a single connection, either by just telling the remote that you want 
to autofollow tags, and it should therefore include any tags that point to 
any objects it includes, or by allowing you to list more refs that you 
want after you've received the pack without disconnecting, would be quite 
nice, but I agree that it's a longer-term issue.

> > It's silly to 
> > decide to fetch T because we will only need that one object, and then not 
> > instantly tell the server we only need that one object. (And, as luck 
> > would have it, yesterday I wrote code to cause for_each_ref return some
> > specific values in addition to and before the actual stored refs.)
> 
> You won't know if you need only one object, so seeing that you
> have T^{} and asking _only_ for T is _wrong_.  Think of a tag
> that points at another tag that points at the commit.  You need
> to tell the other end "I have T^{}, please give me T", and that
> is exactly what the autofollowing does.

I don't see that. If the situation is:

      T - tag     master
     /           /
O - A - O - O - B

the first fetch will see:

tag: T
tag^{}: A
master: B

Only heads are interesting, so we fetch B. When we've fetched B, we find 
that we now have tag^{}. So then we do a new fetch, and (bugs aside) list 
our now-current refs, including origin/master (=B) but not including A, 
because we don't (yet) have any refs for it. I'm suggesting that, while 
autofollowing tags, we should make a point of listing A, because we know 
it's relevant. Furthermore, if the remote doesn't have B (due to mirror 
skew, perhaps), listing B and not listing A (in particular) will lead to 
an inexact search for a common commit, when we know perfectly well that A 
is the closest common commit between what we have and tag.

The issue is that our starting set for our side of the negotiation is our 
current refs, which doesn't include A. I'm suggesting that, for the 
purposes of autofollow, A should be included.

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Shawn O. Pearce]

Daniel Barkalow <barkalow@iabervon.org> wrote:
> On Wed, 27 Feb 2008, Junio C Hamano wrote:
> > 
> > I think we can teach the upload-pack side to be more helpful and
> > with a protocol extension to send tag objects that are pointing
> > at commits that will be included in the result, or something
> > like that, though.  But that is outside the scope of 1.5.5; it
> > would be a moderate to large protocol surgery, and I suspect it
> > might even have to affect pack-objects.
> 
> Using a single connection, either by just telling the remote that you want 
> to autofollow tags, and it should therefore include any tags that point to 
> any objects it includes,

I agree its outside of 1.5.5, as we'd all like to see 1.5.5 happen
soon, but it could be 1.5.6 material, especially if someone starts
working on it sooner rather than later.

Its actually probably not that difficult to implement.  We'd just
want to include a size threshold, to prevent the client from
suddenly receiving a 1M tag (with say a build log embedded in it)
on an otherwise 100K transfer.  Autofollowing by having the remote
include the tags in the pack and send to the client would be more
efficient for both sides then autofollowing with a second set of
ref requests, even if we are keeping the current connection open.

I'll try to work up a prototype of this soon, say in the next week.
Obviously not for 1.5.5 but no reason to wait for the 1.5.6/1.6.0
window to open before developing it.  I think its a better approach
then supporting a second set of ref requests on the same connection.

_IF_ we are going to support a second set of ref requests on the
same connection then we should also support being able to switch
to another repository.  I have 40 some odd repositories at day-job
that a shell script loops over and does fetches in, over SSH.
Setting up and tearing down 40+ SSH connections (especially with tag
following!) sucks[*1*].  I think the X.org folks are in a similar
position as me[*2*].
 
> If the situation is:
> 
>       T - tag     master
>      /           /
> O - A - O - O - B
> 
> the first fetch will see:
> 
> tag: T
> tag^{}: A
> master: B
> 
> The issue is that our starting set for our side of the negotiation is our 
> current refs, which doesn't include A. I'm suggesting that, for the 
> purposes of autofollow, A should be included.

I agree.  This is probably easier than coding the protocol extension above.
:-)


*1* I know all about the SSH connection sharing feature, it is
    unsupported on Cygwin.  I'm on Cygwin at day-job.  So that is
    a no-go.

*2* X.org users are more likely to be on a UNIX platform where the
    OpenSSH connection share code works correctly.

-- 
Shawn.

Re: warning: no common commits - slow pull

[Junio C Hamano]

Daniel Barkalow <barkalow@iabervon.org> writes:

> On Wed, 27 Feb 2008, Junio C Hamano wrote:
>
>> Daniel Barkalow <barkalow@iabervon.org> writes:
>> 
>> > Correcting the transport code is important (and should
>> > probably be done...

I thought about discarding the cached refs upon disconnect, but didn't do
that, because presumably a caller might want to:

    transport_get_remote_refs() to find what they have
    decide what it wants
    transport_fetch_refs() to ask for them
    do stuff about the refs obtained
    transport_disconnect() to finish the transfer
    still do stuff about the refs obtained

and such a change would forbid the last step.  But the only reason I
avoided to break such a potential caller was because I did not bother to
check if such a caller exists, and not because I thought the above
sequence is sane, so if you think it is saner to clean up the stale
information upon disconnect, please do so.

> Using a single connection, either by just telling the remote that you want 
> to autofollow tags, and it should therefore include any tags that point to 
> any objects it includes, or by allowing you to list more refs that you 
> want after you've received the pack without disconnecting, would be quite 
> nice, but I agree that it's a longer-term issue.

Yes, that is what I was talking about.

>> You won't know if you need only one object, so seeing that you
>> have T^{} and asking _only_ for T is _wrong_.  Think of a tag
>> that points at another tag that points at the commit.  You need
>> to tell the other end "I have T^{}, please give me T", and that
>> is exactly what the autofollowing does.
>
> I don't see that. If the situation is:
>
>       T - tag     master
>      /           /
> O - A - O - O - B
> ...
> The issue is that our starting set for our side of the negotiation is our 
> current refs, which doesn't include A. I'm suggesting that, for the 
> purposes of autofollow, A should be included.

By telling the other end that we have B, we are implicitly telling that we
have A as well.  Under normal situation, telling the other end we have A
does not help nor hurt anything.  Under abnormal situation (e.g. DNS round
robin switching the other end in the middle), the other end may say "I
dunno about B", but the protocol is designed to negotiate and find that
both ends have A, by following the ancestry chain down, so I do not think
telling the other end that we have A helps that much.  I however think
that such a change would help sweeping potential bugs under the rug by
making them harder to trigger.

By the way, the situation I said your logic would break is this:

    ---o---A---o---o---B
            \
             T---S

Both T and S are annotated tags, pointing at A and T respectively, and
they both peel to A.  As long as you ask for both T and S you may be Ok,
but it feels still wrong.  Commit walkers may grab S, die before grabbing
T (git-native protocol is atomic with respect to objects transfer, so it
won't have such an issue).

Re: warning: no common commits - slow pull

[Shawn O. Pearce]

"Shawn O. Pearce" <spearce@spearce.org> wrote:
> Daniel Barkalow <barkalow@iabervon.org> wrote:
> > On Wed, 27 Feb 2008, Junio C Hamano wrote:
> > > 
> > > I think we can teach the upload-pack side to be more helpful and
> > > with a protocol extension to send tag objects that are pointing
> > > at commits that will be included in the result, or something
> > > like that, though.  But that is outside the scope of 1.5.5; it
> > > would be a moderate to large protocol surgery, and I suspect it
> > > might even have to affect pack-objects.
> > 
> > Using a single connection, either by just telling the remote that you want 
> > to autofollow tags, and it should therefore include any tags that point to 
> > any objects it includes,
> 
> I agree its outside of 1.5.5, as we'd all like to see 1.5.5 happen
> soon, but it could be 1.5.6 material, especially if someone starts
> working on it sooner rather than later.
> 
> Its actually probably not that difficult to implement.

OK, so I posted a fairly short series tonight (4 patches) that
handles some of the common cases in a fairly small amount of
code churn.  It might just be 1.5.5-ish.

Doing anything better is going to require a new protocol extension,
which is already 1.5.6 material.  In the mean time maybe Junio's
earlier patch to try and drop the ref_map when we do open the new
connection is the way to deal with the round-robin DNS issues.

-- 
Shawn.

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Wed, 27 Feb 2008, Junio C Hamano wrote:

> Daniel Barkalow <barkalow@iabervon.org> writes:
> 
> > On Wed, 27 Feb 2008, Junio C Hamano wrote:
> >
> >> Daniel Barkalow <barkalow@iabervon.org> writes:
> >> 
> >> > Correcting the transport code is important (and should
> >> > probably be done...
> 
> I thought about discarding the cached refs upon disconnect, but didn't do
> that, because presumably a caller might want to:
> 
>     transport_get_remote_refs() to find what they have
>     decide what it wants
>     transport_fetch_refs() to ask for them
>     do stuff about the refs obtained
>     transport_disconnect() to finish the transfer
>     still do stuff about the refs obtained
> 
> and such a change would forbid the last step.  But the only reason I
> avoided to break such a potential caller was because I did not bother to
> check if such a caller exists, and not because I thought the above
> sequence is sane, so if you think it is saner to clean up the stale
> information upon disconnect, please do so.

Actually, I just realized something which should have been obvious: when 
we reconnect, we get a list of the remote's refs, which we currently 
discard immediately. We should actually pass this list to fetch_pack() if 
we just reconnected, so that the client side always does the interaction 
with the right idea of the server's refs, and discard it afterwards. The 
fact that the user of transport_*() doesn't find out that the server 
side's refs change in the middle of the life cycle and can't find out in 
any way doesn't matter too much, so long as each actual connection is 
internally consistant. (And the situation is no different from how it used 
to be with git-fetch.sh: if you get a different mirror later, you may 
discover that the server now doesn't have refs that it seemed to 
advertize, but nothing weird happens.)

> >> You won't know if you need only one object, so seeing that you
> >> have T^{} and asking _only_ for T is _wrong_.  Think of a tag
> >> that points at another tag that points at the commit.  You need
> >> to tell the other end "I have T^{}, please give me T", and that
> >> is exactly what the autofollowing does.
> >
> > I don't see that. If the situation is:
> >
> >       T - tag     master
> >      /           /
> > O - A - O - O - B
> > ...
> > The issue is that our starting set for our side of the negotiation is our 
> > current refs, which doesn't include A. I'm suggesting that, for the 
> > purposes of autofollow, A should be included.
> 
> By telling the other end that we have B, we are implicitly telling that we
> have A as well.  Under normal situation, telling the other end we have A
> does not help nor hurt anything.

I think it could be slightly less server load if it doesn't have to walk 
from B to A, and I could make up something about cache locality.

> Under abnormal situation (e.g. DNS round
> robin switching the other end in the middle), the other end may say "I
> dunno about B", but the protocol is designed to negotiate and find that
> both ends have A, by following the ancestry chain down, so I do not think
> telling the other end that we have A helps that much.

I remember your tests that didn't quite show the problem leading to the 
autofollow connection getting ~100 objects, which is better than 700000 
but worse than the correct 1 for that case; I think it had found a commit 
commit not too far away, but not the perfect one.

> I however think
> that such a change would help sweeping potential bugs under the rug by
> making them harder to trigger.
> 
> By the way, the situation I said your logic would break is this:
> 
>     ---o---A---o---o---B
>             \
>              T---S
> 
> Both T and S are annotated tags, pointing at A and T respectively, and
> they both peel to A.  As long as you ask for both T and S you may be Ok,
> but it feels still wrong.  Commit walkers may grab S, die before grabbing
> T (git-native protocol is atomic with respect to objects transfer, so it
> won't have such an issue).

They wouldn't write a ref for S, though, so the result would be consistant 
still. If you ask for T and S and say you have A, everything should work.

	-Daniel
*This .sig left intentionally blank*

[PATCH] Always use the current connection's remote ref list in git protocol

[Daniel Barkalow]

We always report to the user the list of refs we got from the first
connection, even if we do multiple connections. But we should always
use each connection's own list of refs in the communication with the
server, in case we got a different server out of DNS rotation or the
timing was surprising or something.

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
---
This should fix the same part of the problem that discarding 
transport->remote_refs did, but without having transport.c try to do 
foolish stuff and builtin-fetch need to tell it not to.

 transport.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/transport.c b/transport.c
index 397983d..fc92311 100644
--- a/transport.c
+++ b/transport.c
@@ -622,6 +622,7 @@ static int fetch_refs_via_pack(struct transport *transport,
 	char *dest = xstrdup(transport->url);
 	struct fetch_pack_args args;
 	int i;
+	struct ref *refs_tmp = NULL;
 
 	memset(&args, 0, sizeof(args));
 	args.uploadpack = data->uploadpack;
@@ -634,15 +635,13 @@ static int fetch_refs_via_pack(struct transport *transport,
 	for (i = 0; i < nr_heads; i++)
 		origh[i] = heads[i] = xstrdup(to_fetch[i]->name);
 
-	refs = transport_get_remote_refs(transport);
 	if (!data->conn) {
-		struct ref *refs_tmp;
 		connect_setup(transport);
 		get_remote_heads(data->fd[0], &refs_tmp, 0, NULL, 0);
-		free_refs(refs_tmp);
 	}
 
-	refs = fetch_pack(&args, data->fd, data->conn, transport->remote_refs,
+	refs = fetch_pack(&args, data->fd, data->conn, 
+			  refs_tmp ? refs_tmp : transport->remote_refs,
 			  dest, nr_heads, heads, &transport->pack_lockfile);
 	close(data->fd[0]);
 	close(data->fd[1]);
@@ -650,6 +649,8 @@ static int fetch_refs_via_pack(struct transport *transport,
 		refs = NULL;
 	data->conn = NULL;
 
+	free_refs(refs_tmp);
+
 	for (i = 0; i < nr_heads; i++)
 		free(origh[i]);
 	free(origh);
-- 
1.5.4.3.328.gcaed

Re: warning: no common commits - slow pull

[Junio C Hamano]

Daniel Barkalow <barkalow@iabervon.org> writes:

> Actually, I just realized something which should have been obvious: when 
> we reconnect, we get a list of the remote's refs, which we currently 
> discard immediately. We should actually pass this list to fetch_pack() if 
> we just reconnected, so that the client side always does the interaction 
> with the right idea of the server's refs, and discard it afterwards. The 
> fact that the user of transport_*() doesn't find out that the server 
> side's refs change in the middle of the life cycle and can't find out in 
> any way doesn't matter too much, so long as each actual connection is 
> internally consistant. (And the situation is no different from how it used 
> to be with git-fetch.sh: if you get a different mirror later, you may 
> discover that the server now doesn't have refs that it seemed to 
> advertize, but nothing weird happens.)

I think that would also be a valid way to solve this "stale idea
of what the other side has" and can replace my weatherbaloon
patch.

Another potential problem area is if find_common() does the
right thing when it is called for the second time.  I did not
check if you clear COMMON, SEEN, COMPLETE etc. bits from the
object database before initiating the second round, but if you
didn't, I am afraid these bits left over from the primary
transfer might interfere the common ancestor discovery during
the second round.

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Thu, 28 Feb 2008, Junio C Hamano wrote:

> Another potential problem area is if find_common() does the
> right thing when it is called for the second time.  I did not
> check if you clear COMMON, SEEN, COMPLETE etc. bits from the
> object database before initiating the second round, but if you
> didn't, I am afraid these bits left over from the primary
> transfer might interfere the common ancestor discovery during
> the second round.

Absolutely; that was actually my first guess at why it was failing, and I 
think it's a necessary aspect to the failure. Let me see if I can get your 
test case to exhibit the problem for me and look into it further.

	-Daniel
*This .sig left intentionally blank*

Re: warning: no common commits - slow pull

[Jon Loeliger]

Shawn O. Pearce wrote:
> "Shawn O. Pearce" <spearce@spearce.org> wrote:
>> Daniel Barkalow <barkalow@iabervon.org> wrote:

>> I agree its outside of 1.5.5, as we'd all like to see 1.5.5 happen
>> soon, but it could be 1.5.6 material, especially if someone starts
>> working on it sooner rather than later.
>>
>> Its actually probably not that difficult to implement.
> 
> OK, so I posted a fairly short series tonight (4 patches) that
> handles some of the common cases in a fairly small amount of
> code churn.  It might just be 1.5.5-ish.
> 
> Doing anything better is going to require a new protocol extension,
> which is already 1.5.6 material.  In the mean time maybe Junio's
> earlier patch to try and drop the ref_map when we do open the new
> connection is the way to deal with the round-robin DNS issues.


Hmmm... Might the any protocol extensions require a 1.6 release
rather than a 1.5.x release?  Or is this extension compatible
enough that it can be transparent?

Thanks,
jdl

Re: warning: no common commits - slow pull

[Daniel Barkalow]

On Fri, 29 Feb 2008, Jon Loeliger wrote:

> Shawn O. Pearce wrote:
> > "Shawn O. Pearce" <spearce@spearce.org> wrote:
> > > Daniel Barkalow <barkalow@iabervon.org> wrote:
> 
> > > I agree its outside of 1.5.5, as we'd all like to see 1.5.5 happen
> > > soon, but it could be 1.5.6 material, especially if someone starts
> > > working on it sooner rather than later.
> > >
> > > Its actually probably not that difficult to implement.
> > 
> > OK, so I posted a fairly short series tonight (4 patches) that
> > handles some of the common cases in a fairly small amount of
> > code churn.  It might just be 1.5.5-ish.
> > 
> > Doing anything better is going to require a new protocol extension,
> > which is already 1.5.6 material.  In the mean time maybe Junio's
> > earlier patch to try and drop the ref_map when we do open the new
> > connection is the way to deal with the round-robin DNS issues.
> 
> 
> Hmmm... Might the any protocol extensions require a 1.6 release
> rather than a 1.5.x release?  Or is this extension compatible
> enough that it can be transparent?

The client and server exchange a list of supported features at the 
beginning, and the difference in behavior would be at the end, so it 
should be no problem to have the client ask for the chance to make further 
requests and the server acknowledge that (or the server offer and the 
client accept, depending on the order they do it, which I don't remember) 
without affecting programs that don't report the feature.

	-Daniel
*This .sig left intentionally blank*