From: larsxschneider@gmail.com
To: git@vger.kernel.org
Cc: luke@diamand.org, pw@padd.com, torarvid@gmail.com,
ksaitoh560@gmail.com, Lars Schneider <larsxschneider@gmail.com>
Subject: [PATCH v2] git-p4: fix faulty paths for case insensitive systems
Date: Wed, 19 Aug 2015 22:04:46 +0200 [thread overview]
Message-ID: <1440014686-63290-2-git-send-email-larsxschneider@gmail.com> (raw)
In-Reply-To: <1440014686-63290-1-git-send-email-larsxschneider@gmail.com>
From: Lars Schneider <larsxschneider@gmail.com>
PROBLEM:
We run P4 servers on Linux and P4 clients on Windows. For an unknown
reason the file path for a number of files in P4 does not match the
directory path with respect to case sensitivity.
E.g. `p4 files` might return
//depot/path/to/file1
//depot/PATH/to/file2
If you use P4/P4V then these files end up in the same directory, e.g.
//depot/path/to/file1
//depot/path/to/file2
If you use git-p4 then all files not matching the correct file path
(e.g. `file2`) will be ignored.
SOLUTION:
Identify files that are different with respect to case sensitivity.
If there are any then run `p4 dirs` to build up a dictionary
containing the "correct" cases for each path. It looks like P4
interprets "correct" here as the existing path of the first file in a
directory. The path dictionary is used later on to fix all paths.
This is only applied if the parameter "--fix-paths" is passed to the
git-p4 clone command.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
---
git-p4.py | 83 +++++++++++++++++++++++++++++++++--
t/t9821-git-p4-path-variations.sh | 91 +++++++++++++++++++++++++++++++++++++++
2 files changed, 170 insertions(+), 4 deletions(-)
create mode 100755 t/t9821-git-p4-path-variations.sh
diff --git a/git-p4.py b/git-p4.py
index 073f87b..a21809d 100755
--- a/git-p4.py
+++ b/git-p4.py
@@ -1931,7 +1931,7 @@ class View(object):
(self.client_prefix, clientFile))
return clientFile[len(self.client_prefix):]
- def update_client_spec_path_cache(self, files):
+ def update_client_spec_path_cache(self, files, fixPathCase = None):
""" Caching file paths by "p4 where" batch query """
# List depot file paths exclude that already cached
@@ -1950,6 +1950,8 @@ class View(object):
if "unmap" in res:
# it will list all of them, but only one not unmap-ped
continue
+ if fixPathCase:
+ res['depotFile'] = fixPathCase(res['depotFile'])
self.client_spec_path_cache[res['depotFile']] = self.convert_client_path(res["clientFile"])
# not found files or unmap files set to ""
@@ -1987,6 +1989,7 @@ class P4Sync(Command, P4UserMap):
help="Maximum number of changes to import"),
optparse.make_option("--changes-block-size", dest="changes_block_size", type="int",
help="Internal block size to use when iteratively calling p4 changes"),
+ optparse.make_option("--fix-paths", dest="fixPaths", action="store_true"),
optparse.make_option("--keep-path", dest="keepRepoPath", action='store_true',
help="Keep entire BRANCH/DIR/SUBDIR prefix during import"),
optparse.make_option("--use-client-spec", dest="useClientSpec", action='store_true',
@@ -2017,6 +2020,7 @@ class P4Sync(Command, P4UserMap):
self.maxChanges = ""
self.changes_block_size = None
self.keepRepoPath = False
+ self.fixPaths = False
self.depotPaths = None
self.p4BranchesInGit = []
self.cloneExclude = []
@@ -2049,7 +2053,8 @@ class P4Sync(Command, P4UserMap):
files = []
fnum = 0
while commit.has_key("depotFile%s" % fnum):
- path = commit["depotFile%s" % fnum]
+ path = commit["depotFile%s" % fnum]
+ path = self.fixPathCase(path)
if [p for p in self.cloneExclude
if p4PathStartsWith(path, p)]:
@@ -2113,7 +2118,9 @@ class P4Sync(Command, P4UserMap):
branches = {}
fnum = 0
while commit.has_key("depotFile%s" % fnum):
- path = commit["depotFile%s" % fnum]
+ path = commit["depotFile%s" % fnum]
+ path = self.fixPathCase(path)
+
found = [p for p in self.depotPaths
if p4PathStartsWith(path, p)]
if not found:
@@ -2240,6 +2247,10 @@ class P4Sync(Command, P4UserMap):
if marshalled["code"] == "error":
if "data" in marshalled:
err = marshalled["data"].rstrip()
+
+ if "depotFile" in marshalled:
+ marshalled['depotFile'] = self.fixPathCase(marshalled['depotFile'])
+
if err:
f = None
if self.stream_have_file_info:
@@ -2314,6 +2325,7 @@ class P4Sync(Command, P4UserMap):
# do the last chunk
if self.stream_file.has_key('depotFile'):
+ self.stream_file['depotFile'] = self.fixPathCase(self.stream_file['depotFile'])
self.streamOneP4File(self.stream_file, self.stream_contents)
def make_email(self, userid):
@@ -2371,7 +2383,8 @@ class P4Sync(Command, P4UserMap):
sys.stderr.write("Ignoring file outside of prefix: %s\n" % f['path'])
if self.clientSpecDirs:
- self.clientSpecDirs.update_client_spec_path_cache(files)
+ self.clientSpecDirs.update_client_spec_path_cache(
+ files, lambda x: self.fixPathCase(x))
self.gitStream.write("commit %s\n" % branch)
# gitStream.write("mark :%s\n" % details["change"])
@@ -2835,6 +2848,63 @@ class P4Sync(Command, P4UserMap):
print "IO error with git fast-import. Is your git version recent enough?"
print self.gitError.read()
+ def fixPathCase(self, path):
+ if self.caseCorrectedPaths:
+ components = path.split('/')
+ filename = components.pop()
+ dirname = '/'.join(components).lower() + '/'
+ if dirname in self.caseCorrectedPaths:
+ path = self.caseCorrectedPaths[dirname] + filename
+ return path
+
+ def generatePathCaseDict(self, depotPaths):
+ # Query all files and generate a list of all used paths
+ # e.g. this files list:
+ # //depot/path/to/file1
+ # //depot/PATH/to/file2
+ #
+ # result in this path list:
+ # //depot/
+ # //depot/PATH/
+ # //depot/path/
+ # //depot/PATH/to/
+ # //depot/path/to/
+ p4_paths = set()
+ for p in depotPaths:
+ for f in p4CmdList(["files", p+"..."]):
+ components = f["depotFile"].split('/')[0:-1]
+ for i in range(3, len(components)+1):
+ p4_paths.add('/'.join(components[0:i]) + '/')
+ p4_paths = sorted(list(p4_paths), key=len)
+
+ if len(p4_paths) > len(set([p.lower() for p in p4_paths])):
+ print "ATTENTION: File paths with different case variations detected. Fixing may take a while..."
+ found_variations = True
+ while found_variations:
+ for path in p4_paths:
+ found_variations = False
+ path_variations = [p for p in p4_paths if p.lower() == path.lower()]
+
+ if len(path_variations) > 1:
+ print "%i different case variations for path '%s' detected." % (len(path_variations), path)
+ # If we detect path variations (e.g. //depot/path and //depot/PATH) then we query P4 to list
+ # the subdirectories of the parent (e.g //depot/*). P4 will return these subdirectories with
+ # the correct case.
+ parent_path = '/'.join(path.split('/')[0:-2])
+ case_ok_paths = [p["dir"] + '/' for p in p4CmdList(["dirs", "-D", parent_path + '/*'])]
+
+ # Replace all known paths with the case corrected path from P4 dirs command
+ for case_ok_path in case_ok_paths:
+ pattern = re.compile("^" + re.escape(case_ok_path), re.IGNORECASE)
+ p4_paths = sorted(list(set([pattern.sub(case_ok_path, p) for p in p4_paths])), key=len)
+
+ found_variations = True
+ break
+ return dict((p.lower(), p) for p in p4_paths)
+ else:
+ if self.verbose:
+ print "All file paths have consistent case"
+ return None
def run(self, args):
self.depotPaths = []
@@ -3006,6 +3076,11 @@ class P4Sync(Command, P4UserMap):
self.depotPaths = newPaths
+ if self.fixPaths:
+ self.caseCorrectedPaths = self.generatePathCaseDict(self.depotPaths)
+ else:
+ self.caseCorrectedPaths = None
+
# --detect-branches may change this for each branch
self.branchPrefixes = self.depotPaths
diff --git a/t/t9821-git-p4-path-variations.sh b/t/t9821-git-p4-path-variations.sh
new file mode 100755
index 0000000..ede772f
--- /dev/null
+++ b/t/t9821-git-p4-path-variations.sh
@@ -0,0 +1,91 @@
+#!/bin/sh
+
+test_description='Clone repositories with path case variations'
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d with case folding enabled' '
+ start_p4d -C1
+'
+
+test_expect_success 'Create a repo with path case variations' '
+ client_view "//depot/... //client/..." &&
+ cd "$cli" &&
+
+ mkdir -p One/two &&
+ > One/two/File2.txt &&
+ p4 add One/two/File2.txt &&
+ p4 submit -d "Add file2" &&
+ rm -rf One &&
+
+ mkdir -p one/TWO &&
+ > one/TWO/file1.txt &&
+ p4 add one/TWO/file1.txt &&
+ p4 submit -d "Add file1" &&
+ rm -rf one &&
+
+ mkdir -p one/two &&
+ > one/two/file3.txt &&
+ p4 add one/two/file3.txt &&
+ p4 submit -d "Add file3" &&
+ rm -rf one
+'
+
+test_expect_success 'Clone the repo and WITHOUT path fixing' '
+ client_view "//depot/One/... //client/..." &&
+ git p4 clone --use-client-spec --destination="$git" //depot/one &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ find . | grep two/File2.txt &&
+ git ls-files > lines &&
+ test_line_count = 1 lines
+ )
+'
+
+test_expect_success 'Clone the repo WITH path fixing' '
+ client_view "//depot/One/... //client/..." &&
+ git p4 clone --fix-paths --use-client-spec --destination="$git" //depot/one &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ find . | grep TWO/file1.txt &&
+ find . | grep TWO/File2.txt &&
+ find . | grep TWO/file3.txt &&
+ git ls-files > lines &&
+ test_line_count = 3 lines
+ )
+'
+
+# It looks like P4 determines the path case based on the first file in
+# lexicographical order. Please note the lower case "two" directory for all
+# files triggered through the addition of "File0.txt".
+test_expect_success 'Add a new file and clone the repo WITH path fixing' '
+ client_view "//depot/... //client/..." &&
+ cd "$cli" &&
+
+ mkdir -p One/two &&
+ > One/two/File0.txt &&
+ p4 add One/two/File0.txt &&
+ p4 submit -d "Add file" &&
+ rm -rf One &&
+
+ client_view "//depot/One/... //client/..." &&
+ git p4 clone --fix-paths --use-client-spec --destination="$git" //depot/one &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ find . | grep two/File0.txt &&
+ find . | grep two/file1.txt &&
+ find . | grep two/File2.txt &&
+ find . | grep two/file3.txt &&
+ git ls-files > lines &&
+ test_line_count = 4 lines
+ )
+'
+
+test_expect_success 'kill p4d' '
+ kill_p4d
+'
+
+test_done
--
1.9.5 (Apple Git-50.3)
next prev parent reply other threads:[~2015-08-19 20:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-19 20:04 [PATCH v2] git-p4: fix faulty paths for case insensitive systems larsxschneider
2015-08-19 20:04 ` larsxschneider [this message]
2015-08-20 4:59 ` Torsten Bögershausen
2015-08-20 7:16 ` Lars Schneider
2015-08-20 13:17 ` Eric Sunshine
2015-08-20 15:55 ` Junio C Hamano
2015-08-21 8:08 ` Lars Schneider
2015-08-21 8:10 ` Eric Sunshine
2015-08-20 19:02 ` Torsten Bögershausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440014686-63290-2-git-send-email-larsxschneider@gmail.com \
--to=larsxschneider@gmail.com \
--cc=git@vger.kernel.org \
--cc=ksaitoh560@gmail.com \
--cc=luke@diamand.org \
--cc=pw@padd.com \
--cc=torarvid@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).