* [ruby-core:69769] [Ruby trunk - Bug #11316] [Open] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
@ 2015-06-29 9:01 ` jekader
2015-06-29 9:05 ` [ruby-core:69770] [Ruby trunk - Bug #11316] " jekader
` (7 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: jekader @ 2015-06-29 9:01 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been reported by Jeka Der.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316
* Author: Jeka Der
* Status: Open
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
4) try to run it:
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
here's rhc.bat:
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
To make this work I had to remove the extra double quote in the last line:
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69770] [Ruby trunk - Bug #11316] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
2015-06-29 9:01 ` [ruby-core:69769] [Ruby trunk - Bug #11316] [Open] ruby 2.2 on Windows generates incorrect BAT files for gems jekader
@ 2015-06-29 9:05 ` jekader
2015-07-05 2:20 ` [ruby-core:69874] " leif.eriksen.au
` (6 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: jekader @ 2015-06-29 9:05 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Jeka Der.
I forgot to mention that this works fine with ruby 2.1. The bat file there looks like this:
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@"ruby.exe" "C:/Program Files/ruby21/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@"ruby.exe" "%~dpn0" %*
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53147
* Author: Jeka Der
* Status: Open
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
4) try to run it:
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
here's rhc.bat:
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
To make this work I had to remove the extra double quote in the last line:
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69874] [Ruby trunk - Bug #11316] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
2015-06-29 9:01 ` [ruby-core:69769] [Ruby trunk - Bug #11316] [Open] ruby 2.2 on Windows generates incorrect BAT files for gems jekader
2015-06-29 9:05 ` [ruby-core:69770] [Ruby trunk - Bug #11316] " jekader
@ 2015-07-05 2:20 ` leif.eriksen.au
2015-07-05 3:42 ` [ruby-core:69875] [Ruby trunk - Bug #11316] [Third Party's Issue] " nobu
` (5 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: leif.eriksen.au @ 2015-07-05 2:20 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Leif Eriksen.
I tested this against ruby 2.2.2p95 x64-mingw without issue.
rhc.bat appears to be correct.
~~~
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@"c:\Ruby22-x64\bin\ruby.exe" "c:/Ruby22-x64/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@"c:\Ruby22-x64\bin\ruby.exe" "%~dpn0" %*
~~~
If I get time later today I'll install a 32-bit Windows version of Ruby 2.2 and try again.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53288
* Author: Jeka Der
* Status: Open
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
4) try to run it:
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
here's rhc.bat:
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
To make this work I had to remove the extra double quote in the last line:
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69875] [Ruby trunk - Bug #11316] [Third Party's Issue] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
` (2 preceding siblings ...)
2015-07-05 2:20 ` [ruby-core:69874] " leif.eriksen.au
@ 2015-07-05 3:42 ` nobu
2015-07-05 8:05 ` [ruby-core:69877] [Ruby trunk - Bug #11316] " leif.eriksen.au
` (4 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: nobu @ 2015-07-05 3:42 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Nobuyoshi Nakada.
Description updated
Status changed from Open to Third Party's Issue
It's generated by rubygems, not ruby's installer.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53290
* Author: Jeka Der
* Status: Third Party's Issue
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
~~~
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
~~~
4) try to run it:
~~~
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
~~~
here's rhc.bat:
~~~batch
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
To make this work I had to remove the extra double quote in the last line:
~~~batch
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69877] [Ruby trunk - Bug #11316] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
` (3 preceding siblings ...)
2015-07-05 3:42 ` [ruby-core:69875] [Ruby trunk - Bug #11316] [Third Party's Issue] " nobu
@ 2015-07-05 8:05 ` leif.eriksen.au
2015-07-06 4:48 ` [ruby-core:69879] [Ruby trunk - Bug #11316] [Rejected] " nobu
` (3 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: leif.eriksen.au @ 2015-07-05 8:05 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Leif Eriksen.
No issue with a fresh ruby-2.2.2-p95-x86-mingw either.
Deka, what do you get for "gem --version" ? Check which gem exe is getting picked up in your path with "where gem" as well.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53293
* Author: Jeka Der
* Status: Third Party's Issue
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
~~~
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
~~~
4) try to run it:
~~~
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
~~~
here's rhc.bat:
~~~batch
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
To make this work I had to remove the extra double quote in the last line:
~~~batch
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69879] [Ruby trunk - Bug #11316] [Rejected] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
` (4 preceding siblings ...)
2015-07-05 8:05 ` [ruby-core:69877] [Ruby trunk - Bug #11316] " leif.eriksen.au
@ 2015-07-06 4:48 ` nobu
2015-07-06 4:55 ` [ruby-core:69880] [Ruby trunk - Bug #11316] [Closed] " usa
` (2 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: nobu @ 2015-07-06 4:48 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Nobuyoshi Nakada.
Status changed from Third Party's Issue to Rejected
Fixed at https://github.com/rubygems/rubygems/commit/f9232680
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53294
* Author: Jeka Der
* Status: Rejected
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
~~~
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
~~~
4) try to run it:
~~~
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
~~~
here's rhc.bat:
~~~batch
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
To make this work I had to remove the extra double quote in the last line:
~~~batch
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69880] [Ruby trunk - Bug #11316] [Closed] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
` (5 preceding siblings ...)
2015-07-06 4:48 ` [ruby-core:69879] [Ruby trunk - Bug #11316] [Rejected] " nobu
@ 2015-07-06 4:55 ` usa
2015-07-08 10:08 ` [ruby-core:69898] [Ruby trunk - Bug #11316] " jekader
2015-07-08 11:21 ` [ruby-core:69900] " jekader
8 siblings, 0 replies; 9+ messages in thread
From: usa @ 2015-07-06 4:55 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Usaku NAKAMURA.
Status changed from Rejected to Closed
and imported to trunk at r49511.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53295
* Author: Jeka Der
* Status: Closed
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
~~~
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
~~~
4) try to run it:
~~~
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
~~~
here's rhc.bat:
~~~batch
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
To make this work I had to remove the extra double quote in the last line:
~~~batch
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69898] [Ruby trunk - Bug #11316] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
` (6 preceding siblings ...)
2015-07-06 4:55 ` [ruby-core:69880] [Ruby trunk - Bug #11316] [Closed] " usa
@ 2015-07-08 10:08 ` jekader
2015-07-08 11:21 ` [ruby-core:69900] " jekader
8 siblings, 0 replies; 9+ messages in thread
From: jekader @ 2015-07-08 10:08 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Jeka Der.
Hi and sorry for delay. My gem version is 2.4.5:
~~~
C:\Windows\system32>gem --version
2.4.5
C:\Windows\system32>where gem
C:\Program Files\ruby22\bin\gem
C:\Program Files\ruby22\bin\gem.bat
C:\Windows\system32>rhc --help
'""C:\Program' is not recognized as an internal or external command,
operable program or batch file.
~~~
This only happens when the install path contains spaces. Without spaces there are no extra quotes(and even if there were none it would still work). Anyways, I will open an issue with rubygems about this.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53316
* Author: Jeka Der
* Status: Closed
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
~~~
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
~~~
4) try to run it:
~~~
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
~~~
here's rhc.bat:
~~~batch
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
To make this work I had to remove the extra double quote in the last line:
~~~batch
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread* [ruby-core:69900] [Ruby trunk - Bug #11316] ruby 2.2 on Windows generates incorrect BAT files for gems
[not found] <redmine.issue-11316.20150629090105@ruby-lang.org>
` (7 preceding siblings ...)
2015-07-08 10:08 ` [ruby-core:69898] [Ruby trunk - Bug #11316] " jekader
@ 2015-07-08 11:21 ` jekader
8 siblings, 0 replies; 9+ messages in thread
From: jekader @ 2015-07-08 11:21 UTC (permalink / raw)
To: ruby-core
Issue #11316 has been updated by Jeka Der.
Update: just tested with rubygems 2.4.8 and it generates BAT files correctly. I hope this version is planned for inclusion into Windows builds of ruby.
----------------------------------------
Bug #11316: ruby 2.2 on Windows generates incorrect BAT files for gems
https://bugs.ruby-lang.org/issues/11316#change-53318
* Author: Jeka Der
* Status: Closed
* Priority: Normal
* Assignee:
* ruby -v: ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
* Backport: 2.0.0: UNKNOWN, 2.1: UNKNOWN, 2.2: UNKNOWN
----------------------------------------
In Ruby 2.2 on Windows it's impossible to install the "rhc" gem since the BAT wrapper has a typo.
steps to reproduce:
1) install ruby 2.2.2 into a directory with spacer (C:\Program Files\ruby22)
2) install git
3) open console and install "rhc" gem:
~~~
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [i386-mingw32]
C:\Windows\system32>gem install rhc
Fetching: open4-1.3.4.gem (100%)
Successfully installed open4-1.3.4
Fetching: httpclient-2.6.0.1.gem (100%)
Successfully installed httpclient-2.6.0.1
Fetching: highline-1.6.21.gem (100%)
Successfully installed highline-1.6.21
Fetching: commander-4.2.1.gem (100%)
Successfully installed commander-4.2.1
Fetching: archive-tar-minitar-0.5.2.gem (100%)
Successfully installed archive-tar-minitar-0.5.2
Fetching: net-ssh-2.9.2.gem (100%)
Successfully installed net-ssh-2.9.2
Fetching: net-ssh-gateway-1.2.0.gem (100%)
Successfully installed net-ssh-gateway-1.2.0
Fetching: net-ssh-multi-1.2.1.gem (100%)
Successfully installed net-ssh-multi-1.2.1
Fetching: net-scp-1.2.1.gem (100%)
Successfully installed net-scp-1.2.1
Fetching: rhc-1.35.4.gem (100%)
===========================================================================
If this is your first time installing the RHC tools, please run 'rhc setup'
===========================================================================
Successfully installed rhc-1.35.4
Parsing documentation for open4-1.3.4
Installing ri documentation for open4-1.3.4
Parsing documentation for httpclient-2.6.0.1
Installing ri documentation for httpclient-2.6.0.1
Parsing documentation for highline-1.6.21
Installing ri documentation for highline-1.6.21
Parsing documentation for commander-4.2.1
Installing ri documentation for commander-4.2.1
Parsing documentation for archive-tar-minitar-0.5.2
Installing ri documentation for archive-tar-minitar-0.5.2
Parsing documentation for net-ssh-2.9.2
Installing ri documentation for net-ssh-2.9.2
Parsing documentation for net-ssh-gateway-1.2.0
Installing ri documentation for net-ssh-gateway-1.2.0
Parsing documentation for net-ssh-multi-1.2.1
Installing ri documentation for net-ssh-multi-1.2.1
Parsing documentation for net-scp-1.2.1
Installing ri documentation for net-scp-1.2.1
Parsing documentation for rhc-1.35.4
Installing ri documentation for rhc-1.35.4
Done installing documentation for open4, httpclient, highline, commander, archiv
e-tar-minitar, net-ssh, net-ssh-gateway, net-ssh-multi, net-scp, rhc after 17 se
conds
10 gems installed
~~~
4) try to run it:
~~~
C:\Windows\system32>rhc --help
'""C:\My' is not recognized as an internal or external command,
operable program or batch file.
~~~
here's rhc.bat:
~~~batch
@ECHO OFF
IF NOT "%~f0" == "~f0" GOTO :WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "C:/Program Files/ruby22/bin/rhc" %1 %2 %3 %4 %5 %6 %7 %8 %9
GOTO :EOF
:WinNT
@""C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
To make this work I had to remove the extra double quote in the last line:
~~~batch
@"C:\Program Files\ruby22\bin\ruby.exe" "%~dpn0" %*
~~~
--
https://bugs.ruby-lang.org/
^ permalink raw reply [flat|nested] 9+ messages in thread