[PATCH v2 1/3] Move the user-facing test library to test-lib-functions.sh

[Thomas Rast <trast@student.ethz.ch>]

This just moves all the user-facing functions to a separate file and
sources that instead.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
---
 t/test-lib-functions.sh |  835 +++++++++++++++++++++++++++++++++++++++++++++++
 t/test-lib.sh           |  552 +-------------------------------
 2 files changed, 840 insertions(+), 547 deletions(-)
 create mode 100644 t/test-lib-functions.sh

diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh
new file mode 100644
index 0000000..580f767
--- /dev/null
+++ b/t/test-lib-functions.sh
@@ -0,0 +1,835 @@
+# The semantics of the editor variables are that of invoking
+# sh -c "$EDITOR \"$@\"" files ...
+#
+# If our trash directory contains shell metacharacters, they will be
+# interpreted if we just set $EDITOR directly, so do a little dance with
+# environment variables to work around this.
+#
+# In particular, quoting isn't enough, as the path may contain the same quote
+# that we're using.
+test_set_editor () {
+	FAKE_EDITOR="$1"
+	export FAKE_EDITOR
+	EDITOR='"$FAKE_EDITOR"'
+	export EDITOR
+}
+
+test_decode_color () {
+	awk '
+		function name(n) {
+			if (n == 0) return "RESET";
+			if (n == 1) return "BOLD";
+			if (n == 30) return "BLACK";
+			if (n == 31) return "RED";
+			if (n == 32) return "GREEN";
+			if (n == 33) return "YELLOW";
+			if (n == 34) return "BLUE";
+			if (n == 35) return "MAGENTA";
+			if (n == 36) return "CYAN";
+			if (n == 37) return "WHITE";
+			if (n == 40) return "BLACK";
+			if (n == 41) return "BRED";
+			if (n == 42) return "BGREEN";
+			if (n == 43) return "BYELLOW";
+			if (n == 44) return "BBLUE";
+			if (n == 45) return "BMAGENTA";
+			if (n == 46) return "BCYAN";
+			if (n == 47) return "BWHITE";
+		}
+		{
+			while (match($0, /\033\[[0-9;]*m/) != 0) {
+				printf "%s<", substr($0, 1, RSTART-1);
+				codes = substr($0, RSTART+2, RLENGTH-3);
+				if (length(codes) == 0)
+					printf "%s", name(0)
+				else {
+					n = split(codes, ary, ";");
+					sep = "";
+					for (i = 1; i <= n; i++) {
+						printf "%s%s", sep, name(ary[i]);
+						sep = ";"
+					}
+				}
+				printf ">";
+				$0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
+			}
+			print
+		}
+	'
+}
+
+nul_to_q () {
+	perl -pe 'y/\000/Q/'
+}
+
+q_to_nul () {
+	perl -pe 'y/Q/\000/'
+}
+
+q_to_cr () {
+	tr Q '\015'
+}
+
+q_to_tab () {
+	tr Q '\011'
+}
+
+append_cr () {
+	sed -e 's/$/Q/' | tr Q '\015'
+}
+
+remove_cr () {
+	tr '\015' Q | sed -e 's/Q$//'
+}
+
+# In some bourne shell implementations, the "unset" builtin returns
+# nonzero status when a variable to be unset was not set in the first
+# place.
+#
+# Use sane_unset when that should not be considered an error.
+
+sane_unset () {
+	unset "$@"
+	return 0
+}
+
+test_tick () {
+	if test -z "${test_tick+set}"
+	then
+		test_tick=1112911993
+	else
+		test_tick=$(($test_tick + 60))
+	fi
+	GIT_COMMITTER_DATE="$test_tick -0700"
+	GIT_AUTHOR_DATE="$test_tick -0700"
+	export GIT_COMMITTER_DATE GIT_AUTHOR_DATE
+}
+
+# Call test_commit with the arguments "<message> [<file> [<contents>]]"
+#
+# This will commit a file with the given contents and the given commit
+# message.  It will also add a tag with <message> as name.
+#
+# Both <file> and <contents> default to <message>.
+
+test_commit () {
+	file=${2:-"$1.t"}
+	echo "${3-$1}" > "$file" &&
+	git add "$file" &&
+	test_tick &&
+	git commit -m "$1" &&
+	git tag "$1"
+}
+
+# Call test_merge with the arguments "<message> <commit>", where <commit>
+# can be a tag pointing to the commit-to-merge.
+
+test_merge () {
+	test_tick &&
+	git merge -m "$1" "$2" &&
+	git tag "$1"
+}
+
+# This function helps systems where core.filemode=false is set.
+# Use it instead of plain 'chmod +x' to set or unset the executable bit
+# of a file in the working directory and add it to the index.
+
+test_chmod () {
+	chmod "$@" &&
+	git update-index --add "--chmod=$@"
+}
+
+# Unset a configuration variable, but don't fail if it doesn't exist.
+test_unconfig () {
+	git config --unset-all "$@"
+	config_status=$?
+	case "$config_status" in
+	5) # ok, nothing to unset
+		config_status=0
+		;;
+	esac
+	return $config_status
+}
+
+# Set git config, automatically unsetting it after the test is over.
+test_config () {
+	test_when_finished "test_unconfig '$1'" &&
+	git config "$@"
+}
+
+test_config_global () {
+	test_when_finished "test_unconfig --global '$1'" &&
+	git config --global "$@"
+}
+
+# Use test_set_prereq to tell that a particular prerequisite is available.
+# The prerequisite can later be checked for in two ways:
+#
+# - Explicitly using test_have_prereq.
+#
+# - Implicitly by specifying the prerequisite tag in the calls to
+#   test_expect_{success,failure,code}.
+#
+# The single parameter is the prerequisite tag (a simple word, in all
+# capital letters by convention).
+
+test_set_prereq () {
+	satisfied="$satisfied$1 "
+}
+satisfied=" "
+
+test_have_prereq () {
+	# prerequisites can be concatenated with ','
+	save_IFS=$IFS
+	IFS=,
+	set -- $*
+	IFS=$save_IFS
+
+	total_prereq=0
+	ok_prereq=0
+	missing_prereq=
+
+	for prerequisite
+	do
+		total_prereq=$(($total_prereq + 1))
+		case $satisfied in
+		*" $prerequisite "*)
+			ok_prereq=$(($ok_prereq + 1))
+			;;
+		*)
+			# Keep a list of missing prerequisites
+			if test -z "$missing_prereq"
+			then
+				missing_prereq=$prerequisite
+			else
+				missing_prereq="$prerequisite,$missing_prereq"
+			fi
+		esac
+	done
+
+	test $total_prereq = $ok_prereq
+}
+
+test_declared_prereq () {
+	case ",$test_prereq," in
+	*,$1,*)
+		return 0
+		;;
+	esac
+	return 1
+}
+
+test_expect_failure () {
+	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 2 ||
+	error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
+	export test_prereq
+	if ! test_skip "$@"
+	then
+		say >&3 "checking known breakage: $2"
+		if test_run_ "$2" expecting_failure
+		then
+			test_known_broken_ok_ "$1"
+		else
+			test_known_broken_failure_ "$1"
+		fi
+	fi
+	echo >&3 ""
+}
+
+test_expect_success () {
+	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 2 ||
+	error "bug in the test script: not 2 or 3 parameters to test-expect-success"
+	export test_prereq
+	if ! test_skip "$@"
+	then
+		say >&3 "expecting success: $2"
+		if test_run_ "$2"
+		then
+			test_ok_ "$1"
+		else
+			test_failure_ "$@"
+		fi
+	fi
+	echo >&3 ""
+}
+
+# test_external runs external test scripts that provide continuous
+# test output about their progress, and succeeds/fails on
+# zero/non-zero exit code.  It outputs the test output on stdout even
+# in non-verbose mode, and announces the external script with "# run
+# <n>: ..." before running it.  When providing relative paths, keep in
+# mind that all scripts run in "trash directory".
+# Usage: test_external description command arguments...
+# Example: test_external 'Perl API' perl ../path/to/test.pl
+test_external () {
+	test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 3 ||
+	error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
+	descr="$1"
+	shift
+	export test_prereq
+	if ! test_skip "$descr" "$@"
+	then
+		# Announce the script to reduce confusion about the
+		# test output that follows.
+		say_color "" "# run $test_count: $descr ($*)"
+		# Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG
+		# to be able to use them in script
+		export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG
+		# Run command; redirect its stderr to &4 as in
+		# test_run_, but keep its stdout on our stdout even in
+		# non-verbose mode.
+		"$@" 2>&4
+		if [ "$?" = 0 ]
+		then
+			if test $test_external_has_tap -eq 0; then
+				test_ok_ "$descr"
+			else
+				say_color "" "# test_external test $descr was ok"
+				test_success=$(($test_success + 1))
+			fi
+		else
+			if test $test_external_has_tap -eq 0; then
+				test_failure_ "$descr" "$@"
+			else
+				say_color error "# test_external test $descr failed: $@"
+				test_failure=$(($test_failure + 1))
+			fi
+		fi
+	fi
+}
+
+# Like test_external, but in addition tests that the command generated
+# no output on stderr.
+test_external_without_stderr () {
+	# The temporary file has no (and must have no) security
+	# implications.
+	tmp=${TMPDIR:-/tmp}
+	stderr="$tmp/git-external-stderr.$$.tmp"
+	test_external "$@" 4> "$stderr"
+	[ -f "$stderr" ] || error "Internal error: $stderr disappeared."
+	descr="no stderr: $1"
+	shift
+	say >&3 "# expecting no stderr from previous command"
+	if [ ! -s "$stderr" ]; then
+		rm "$stderr"
+
+		if test $test_external_has_tap -eq 0; then
+			test_ok_ "$descr"
+		else
+			say_color "" "# test_external_without_stderr test $descr was ok"
+			test_success=$(($test_success + 1))
+		fi
+	else
+		if [ "$verbose" = t ]; then
+			output=`echo; echo "# Stderr is:"; cat "$stderr"`
+		else
+			output=
+		fi
+		# rm first in case test_failure exits.
+		rm "$stderr"
+		if test $test_external_has_tap -eq 0; then
+			test_failure_ "$descr" "$@" "$output"
+		else
+			say_color error "# test_external_without_stderr test $descr failed: $@: $output"
+			test_failure=$(($test_failure + 1))
+		fi
+	fi
+}
+
+# debugging-friendly alternatives to "test [-f|-d|-e]"
+# The commands test the existence or non-existence of $1. $2 can be
+# given to provide a more precise diagnosis.
+test_path_is_file () {
+	if ! [ -f "$1" ]
+	then
+		echo "File $1 doesn't exist. $*"
+		false
+	fi
+}
+
+test_path_is_dir () {
+	if ! [ -d "$1" ]
+	then
+		echo "Directory $1 doesn't exist. $*"
+		false
+	fi
+}
+
+test_path_is_missing () {
+	if [ -e "$1" ]
+	then
+		echo "Path exists:"
+		ls -ld "$1"
+		if [ $# -ge 1 ]; then
+			echo "$*"
+		fi
+		false
+	fi
+}
+
+# test_line_count checks that a file has the number of lines it
+# ought to. For example:
+#
+#	test_expect_success 'produce exactly one line of output' '
+#		do something >output &&
+#		test_line_count = 1 output
+#	'
+#
+# is like "test $(wc -l <output) = 1" except that it passes the
+# output through when the number of lines is wrong.
+
+test_line_count () {
+	if test $# != 3
+	then
+		error "bug in the test script: not 3 parameters to test_line_count"
+	elif ! test $(wc -l <"$3") "$1" "$2"
+	then
+		echo "test_line_count: line count for $3 !$1 $2"
+		cat "$3"
+		return 1
+	fi
+}
+
+# This is not among top-level (test_expect_success | test_expect_failure)
+# but is a prefix that can be used in the test script, like:
+#
+#	test_expect_success 'complain and die' '
+#           do something &&
+#           do something else &&
+#	    test_must_fail git checkout ../outerspace
+#	'
+#
+# Writing this as "! git checkout ../outerspace" is wrong, because
+# the failure could be due to a segv.  We want a controlled failure.
+
+test_must_fail () {
+	"$@"
+	exit_code=$?
+	if test $exit_code = 0; then
+		echo >&2 "test_must_fail: command succeeded: $*"
+		return 1
+	elif test $exit_code -gt 129 -a $exit_code -le 192; then
+		echo >&2 "test_must_fail: died by signal: $*"
+		return 1
+	elif test $exit_code = 127; then
+		echo >&2 "test_must_fail: command not found: $*"
+		return 1
+	fi
+	return 0
+}
+
+# Similar to test_must_fail, but tolerates success, too.  This is
+# meant to be used in contexts like:
+#
+#	test_expect_success 'some command works without configuration' '
+#		test_might_fail git config --unset all.configuration &&
+#		do something
+#	'
+#
+# Writing "git config --unset all.configuration || :" would be wrong,
+# because we want to notice if it fails due to segv.
+
+test_might_fail () {
+	"$@"
+	exit_code=$?
+	if test $exit_code -gt 129 -a $exit_code -le 192; then
+		echo >&2 "test_might_fail: died by signal: $*"
+		return 1
+	elif test $exit_code = 127; then
+		echo >&2 "test_might_fail: command not found: $*"
+		return 1
+	fi
+	return 0
+}
+
+# Similar to test_must_fail and test_might_fail, but check that a
+# given command exited with a given exit code. Meant to be used as:
+#
+#	test_expect_success 'Merge with d/f conflicts' '
+#		test_expect_code 1 git merge "merge msg" B master
+#	'
+
+test_expect_code () {
+	want_code=$1
+	shift
+	"$@"
+	exit_code=$?
+	if test $exit_code = $want_code
+	then
+		return 0
+	fi
+
+	echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
+	return 1
+}
+
+# test_cmp is a helper function to compare actual and expected output.
+# You can use it like:
+#
+#	test_expect_success 'foo works' '
+#		echo expected >expected &&
+#		foo >actual &&
+#		test_cmp expected actual
+#	'
+#
+# This could be written as either "cmp" or "diff -u", but:
+# - cmp's output is not nearly as easy to read as diff -u
+# - not all diff versions understand "-u"
+
+test_cmp() {
+	$GIT_TEST_CMP "$@"
+}
+
+# This function can be used to schedule some commands to be run
+# unconditionally at the end of the test to restore sanity:
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		test_when_finished "git config --unset core.capslock" &&
+#		hello world
+#	'
+#
+# That would be roughly equivalent to
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		hello world
+#		git config --unset core.capslock
+#	'
+#
+# except that the greeting and config --unset must both succeed for
+# the test to pass.
+#
+# Note that under --immediate mode, no clean-up is done to help diagnose
+# what went wrong.
+
+test_when_finished () {
+	test_cleanup="{ $*
+		} && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
+}
+
+# Most tests can use the created repository, but some may need to create more.
+# Usage: test_create_repo <directory>
+test_create_repo () {
+	test "$#" = 1 ||
+	error "bug in the test script: not 1 parameter to test-create-repo"
+	repo="$1"
+	mkdir -p "$repo"
+	(
+		cd "$repo" || error "Cannot setup test environment"
+		"$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
+		error "cannot run git init -- have you built things yet?"
+		mv .git/hooks .git/hooks-disabled
+	) || exit
+}
+
+test_expect_failure () {
+	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 2 ||
+	error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
+	export test_prereq
+	if ! test_skip "$@"
+	then
+		say >&3 "checking known breakage: $2"
+		if test_run_ "$2" expecting_failure
+		then
+			test_known_broken_ok_ "$1"
+		else
+			test_known_broken_failure_ "$1"
+		fi
+	fi
+	echo >&3 ""
+}
+
+test_expect_success () {
+	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 2 ||
+	error "bug in the test script: not 2 or 3 parameters to test-expect-success"
+	export test_prereq
+	if ! test_skip "$@"
+	then
+		say >&3 "expecting success: $2"
+		if test_run_ "$2"
+		then
+			test_ok_ "$1"
+		else
+			test_failure_ "$@"
+		fi
+	fi
+	echo >&3 ""
+}
+
+# test_external runs external test scripts that provide continuous
+# test output about their progress, and succeeds/fails on
+# zero/non-zero exit code.  It outputs the test output on stdout even
+# in non-verbose mode, and announces the external script with "# run
+# <n>: ..." before running it.  When providing relative paths, keep in
+# mind that all scripts run in "trash directory".
+# Usage: test_external description command arguments...
+# Example: test_external 'Perl API' perl ../path/to/test.pl
+test_external () {
+	test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 3 ||
+	error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
+	descr="$1"
+	shift
+	export test_prereq
+	if ! test_skip "$descr" "$@"
+	then
+		# Announce the script to reduce confusion about the
+		# test output that follows.
+		say_color "" "# run $test_count: $descr ($*)"
+		# Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG
+		# to be able to use them in script
+		export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG
+		# Run command; redirect its stderr to &4 as in
+		# test_run_, but keep its stdout on our stdout even in
+		# non-verbose mode.
+		"$@" 2>&4
+		if [ "$?" = 0 ]
+		then
+			if test $test_external_has_tap -eq 0; then
+				test_ok_ "$descr"
+			else
+				say_color "" "# test_external test $descr was ok"
+				test_success=$(($test_success + 1))
+			fi
+		else
+			if test $test_external_has_tap -eq 0; then
+				test_failure_ "$descr" "$@"
+			else
+				say_color error "# test_external test $descr failed: $@"
+				test_failure=$(($test_failure + 1))
+			fi
+		fi
+	fi
+}
+
+# Like test_external, but in addition tests that the command generated
+# no output on stderr.
+test_external_without_stderr () {
+	# The temporary file has no (and must have no) security
+	# implications.
+	tmp=${TMPDIR:-/tmp}
+	stderr="$tmp/git-external-stderr.$$.tmp"
+	test_external "$@" 4> "$stderr"
+	[ -f "$stderr" ] || error "Internal error: $stderr disappeared."
+	descr="no stderr: $1"
+	shift
+	say >&3 "# expecting no stderr from previous command"
+	if [ ! -s "$stderr" ]; then
+		rm "$stderr"
+
+		if test $test_external_has_tap -eq 0; then
+			test_ok_ "$descr"
+		else
+			say_color "" "# test_external_without_stderr test $descr was ok"
+			test_success=$(($test_success + 1))
+		fi
+	else
+		if [ "$verbose" = t ]; then
+			output=`echo; echo "# Stderr is:"; cat "$stderr"`
+		else
+			output=
+		fi
+		# rm first in case test_failure exits.
+		rm "$stderr"
+		if test $test_external_has_tap -eq 0; then
+			test_failure_ "$descr" "$@" "$output"
+		else
+			say_color error "# test_external_without_stderr test $descr failed: $@: $output"
+			test_failure=$(($test_failure + 1))
+		fi
+	fi
+}
+
+# debugging-friendly alternatives to "test [-f|-d|-e]"
+# The commands test the existence or non-existence of $1. $2 can be
+# given to provide a more precise diagnosis.
+test_path_is_file () {
+	if ! [ -f "$1" ]
+	then
+		echo "File $1 doesn't exist. $*"
+		false
+	fi
+}
+
+test_path_is_dir () {
+	if ! [ -d "$1" ]
+	then
+		echo "Directory $1 doesn't exist. $*"
+		false
+	fi
+}
+
+test_path_is_missing () {
+	if [ -e "$1" ]
+	then
+		echo "Path exists:"
+		ls -ld "$1"
+		if [ $# -ge 1 ]; then
+			echo "$*"
+		fi
+		false
+	fi
+}
+
+# test_line_count checks that a file has the number of lines it
+# ought to. For example:
+#
+#	test_expect_success 'produce exactly one line of output' '
+#		do something >output &&
+#		test_line_count = 1 output
+#	'
+#
+# is like "test $(wc -l <output) = 1" except that it passes the
+# output through when the number of lines is wrong.
+
+test_line_count () {
+	if test $# != 3
+	then
+		error "bug in the test script: not 3 parameters to test_line_count"
+	elif ! test $(wc -l <"$3") "$1" "$2"
+	then
+		echo "test_line_count: line count for $3 !$1 $2"
+		cat "$3"
+		return 1
+	fi
+}
+
+# This is not among top-level (test_expect_success | test_expect_failure)
+# but is a prefix that can be used in the test script, like:
+#
+#	test_expect_success 'complain and die' '
+#           do something &&
+#           do something else &&
+#	    test_must_fail git checkout ../outerspace
+#	'
+#
+# Writing this as "! git checkout ../outerspace" is wrong, because
+# the failure could be due to a segv.  We want a controlled failure.
+
+test_must_fail () {
+	"$@"
+	exit_code=$?
+	if test $exit_code = 0; then
+		echo >&2 "test_must_fail: command succeeded: $*"
+		return 1
+	elif test $exit_code -gt 129 -a $exit_code -le 192; then
+		echo >&2 "test_must_fail: died by signal: $*"
+		return 1
+	elif test $exit_code = 127; then
+		echo >&2 "test_must_fail: command not found: $*"
+		return 1
+	fi
+	return 0
+}
+
+# Similar to test_must_fail, but tolerates success, too.  This is
+# meant to be used in contexts like:
+#
+#	test_expect_success 'some command works without configuration' '
+#		test_might_fail git config --unset all.configuration &&
+#		do something
+#	'
+#
+# Writing "git config --unset all.configuration || :" would be wrong,
+# because we want to notice if it fails due to segv.
+
+test_might_fail () {
+	"$@"
+	exit_code=$?
+	if test $exit_code -gt 129 -a $exit_code -le 192; then
+		echo >&2 "test_might_fail: died by signal: $*"
+		return 1
+	elif test $exit_code = 127; then
+		echo >&2 "test_might_fail: command not found: $*"
+		return 1
+	fi
+	return 0
+}
+
+# Similar to test_must_fail and test_might_fail, but check that a
+# given command exited with a given exit code. Meant to be used as:
+#
+#	test_expect_success 'Merge with d/f conflicts' '
+#		test_expect_code 1 git merge "merge msg" B master
+#	'
+
+test_expect_code () {
+	want_code=$1
+	shift
+	"$@"
+	exit_code=$?
+	if test $exit_code = $want_code
+	then
+		return 0
+	fi
+
+	echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
+	return 1
+}
+
+# test_cmp is a helper function to compare actual and expected output.
+# You can use it like:
+#
+#	test_expect_success 'foo works' '
+#		echo expected >expected &&
+#		foo >actual &&
+#		test_cmp expected actual
+#	'
+#
+# This could be written as either "cmp" or "diff -u", but:
+# - cmp's output is not nearly as easy to read as diff -u
+# - not all diff versions understand "-u"
+
+test_cmp() {
+	$GIT_TEST_CMP "$@"
+}
+
+# This function can be used to schedule some commands to be run
+# unconditionally at the end of the test to restore sanity:
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		test_when_finished "git config --unset core.capslock" &&
+#		hello world
+#	'
+#
+# That would be roughly equivalent to
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		hello world
+#		git config --unset core.capslock
+#	'
+#
+# except that the greeting and config --unset must both succeed for
+# the test to pass.
+#
+# Note that under --immediate mode, no clean-up is done to help diagnose
+# what went wrong.
+
+test_when_finished () {
+	test_cleanup="{ $*
+		} && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
+}
+
+# Most tests can use the created repository, but some may need to create more.
+# Usage: test_create_repo <directory>
+test_create_repo () {
+	test "$#" = 1 ||
+	error "bug in the test script: not 1 parameter to test-create-repo"
+	repo="$1"
+	mkdir -p "$repo"
+	(
+		cd "$repo" || error "Cannot setup test environment"
+		"$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
+		error "cannot run git init -- have you built things yet?"
+		mv .git/hooks .git/hooks-disabled
+	) || exit
+}
+
diff --git a/t/test-lib.sh b/t/test-lib.sh
index e28d5fd..ec70ef2 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -98,6 +98,8 @@ _z40=0000000000000000000000000000000000000000
 LF='
 '
 
+export _x05 _x40 _z40 LF
+
 # Each test should start with something like this, after copyright notices:
 #
 # test_description='Description of this test...
@@ -223,248 +225,9 @@ die () {
 GIT_EXIT_OK=
 trap 'die' EXIT
 
-# The semantics of the editor variables are that of invoking
-# sh -c "$EDITOR \"$@\"" files ...
-#
-# If our trash directory contains shell metacharacters, they will be
-# interpreted if we just set $EDITOR directly, so do a little dance with
-# environment variables to work around this.
-#
-# In particular, quoting isn't enough, as the path may contain the same quote
-# that we're using.
-test_set_editor () {
-	FAKE_EDITOR="$1"
-	export FAKE_EDITOR
-	EDITOR='"$FAKE_EDITOR"'
-	export EDITOR
-}
-
-test_decode_color () {
-	awk '
-		function name(n) {
-			if (n == 0) return "RESET";
-			if (n == 1) return "BOLD";
-			if (n == 30) return "BLACK";
-			if (n == 31) return "RED";
-			if (n == 32) return "GREEN";
-			if (n == 33) return "YELLOW";
-			if (n == 34) return "BLUE";
-			if (n == 35) return "MAGENTA";
-			if (n == 36) return "CYAN";
-			if (n == 37) return "WHITE";
-			if (n == 40) return "BLACK";
-			if (n == 41) return "BRED";
-			if (n == 42) return "BGREEN";
-			if (n == 43) return "BYELLOW";
-			if (n == 44) return "BBLUE";
-			if (n == 45) return "BMAGENTA";
-			if (n == 46) return "BCYAN";
-			if (n == 47) return "BWHITE";
-		}
-		{
-			while (match($0, /\033\[[0-9;]*m/) != 0) {
-				printf "%s<", substr($0, 1, RSTART-1);
-				codes = substr($0, RSTART+2, RLENGTH-3);
-				if (length(codes) == 0)
-					printf "%s", name(0)
-				else {
-					n = split(codes, ary, ";");
-					sep = "";
-					for (i = 1; i <= n; i++) {
-						printf "%s%s", sep, name(ary[i]);
-						sep = ";"
-					}
-				}
-				printf ">";
-				$0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
-			}
-			print
-		}
-	'
-}
-
-nul_to_q () {
-	perl -pe 'y/\000/Q/'
-}
-
-q_to_nul () {
-	perl -pe 'y/Q/\000/'
-}
-
-q_to_cr () {
-	tr Q '\015'
-}
-
-q_to_tab () {
-	tr Q '\011'
-}
-
-append_cr () {
-	sed -e 's/$/Q/' | tr Q '\015'
-}
-
-remove_cr () {
-	tr '\015' Q | sed -e 's/Q$//'
-}
-
-# In some bourne shell implementations, the "unset" builtin returns
-# nonzero status when a variable to be unset was not set in the first
-# place.
-#
-# Use sane_unset when that should not be considered an error.
-
-sane_unset () {
-	unset "$@"
-	return 0
-}
-
-test_tick () {
-	if test -z "${test_tick+set}"
-	then
-		test_tick=1112911993
-	else
-		test_tick=$(($test_tick + 60))
-	fi
-	GIT_COMMITTER_DATE="$test_tick -0700"
-	GIT_AUTHOR_DATE="$test_tick -0700"
-	export GIT_COMMITTER_DATE GIT_AUTHOR_DATE
-}
-
-# Stop execution and start a shell. This is useful for debugging tests and
-# only makes sense together with "-v".
-#
-# Be sure to remove all invocations of this command before submitting.
-
-test_pause () {
-	if test "$verbose" = t; then
-		"$SHELL_PATH" <&6 >&3 2>&4
-	else
-		error >&5 "test_pause requires --verbose"
-	fi
-}
-
-# Call test_commit with the arguments "<message> [<file> [<contents>]]"
-#
-# This will commit a file with the given contents and the given commit
-# message.  It will also add a tag with <message> as name.
-#
-# Both <file> and <contents> default to <message>.
-
-test_commit () {
-	file=${2:-"$1.t"}
-	echo "${3-$1}" > "$file" &&
-	git add "$file" &&
-	test_tick &&
-	git commit -m "$1" &&
-	git tag "$1"
-}
-
-# Call test_merge with the arguments "<message> <commit>", where <commit>
-# can be a tag pointing to the commit-to-merge.
-
-test_merge () {
-	test_tick &&
-	git merge -m "$1" "$2" &&
-	git tag "$1"
-}
-
-# This function helps systems where core.filemode=false is set.
-# Use it instead of plain 'chmod +x' to set or unset the executable bit
-# of a file in the working directory and add it to the index.
-
-test_chmod () {
-	chmod "$@" &&
-	git update-index --add "--chmod=$@"
-}
-
-# Unset a configuration variable, but don't fail if it doesn't exist.
-test_unconfig () {
-	git config --unset-all "$@"
-	config_status=$?
-	case "$config_status" in
-	5) # ok, nothing to unset
-		config_status=0
-		;;
-	esac
-	return $config_status
-}
-
-# Set git config, automatically unsetting it after the test is over.
-test_config () {
-	test_when_finished "test_unconfig '$1'" &&
-	git config "$@"
-}
-
-
-test_config_global () {
-	test_when_finished "test_unconfig --global '$1'" &&
-	git config --global "$@"
-}
-
-write_script () {
-	{
-		echo "#!${2-"$SHELL_PATH"}" &&
-		cat
-	} >"$1" &&
-	chmod +x "$1"
-}
-
-# Use test_set_prereq to tell that a particular prerequisite is available.
-# The prerequisite can later be checked for in two ways:
-#
-# - Explicitly using test_have_prereq.
-#
-# - Implicitly by specifying the prerequisite tag in the calls to
-#   test_expect_{success,failure,code}.
-#
-# The single parameter is the prerequisite tag (a simple word, in all
-# capital letters by convention).
-
-test_set_prereq () {
-	satisfied="$satisfied$1 "
-}
-satisfied=" "
-
-test_have_prereq () {
-	# prerequisites can be concatenated with ','
-	save_IFS=$IFS
-	IFS=,
-	set -- $*
-	IFS=$save_IFS
-
-	total_prereq=0
-	ok_prereq=0
-	missing_prereq=
-
-	for prerequisite
-	do
-		total_prereq=$(($total_prereq + 1))
-		case $satisfied in
-		*" $prerequisite "*)
-			ok_prereq=$(($ok_prereq + 1))
-			;;
-		*)
-			# Keep a list of missing prerequisites
-			if test -z "$missing_prereq"
-			then
-				missing_prereq=$prerequisite
-			else
-				missing_prereq="$prerequisite,$missing_prereq"
-			fi
-		esac
-	done
-
-	test $total_prereq = $ok_prereq
-}
-
-test_declared_prereq () {
-	case ",$test_prereq," in
-	*,$1,*)
-		return 0
-		;;
-	esac
-	return 1
-}
+# The user-facing functions are loaded from a separate file so that
+# test_perf subshells can have them too
+. "${TEST_DIRECTORY:-.}"/test-lib-functions.sh
 
 # You are not expected to call test_ok_ and test_failure_ directly, use
 # the text_expect_* functions instead.
@@ -552,311 +315,6 @@ test_skip () {
 	esac
 }
 
-test_expect_failure () {
-	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
-	test "$#" = 2 ||
-	error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
-	export test_prereq
-	if ! test_skip "$@"
-	then
-		say >&3 "checking known breakage: $2"
-		if test_run_ "$2" expecting_failure
-		then
-			test_known_broken_ok_ "$1"
-		else
-			test_known_broken_failure_ "$1"
-		fi
-	fi
-	echo >&3 ""
-}
-
-test_expect_success () {
-	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
-	test "$#" = 2 ||
-	error "bug in the test script: not 2 or 3 parameters to test-expect-success"
-	export test_prereq
-	if ! test_skip "$@"
-	then
-		say >&3 "expecting success: $2"
-		if test_run_ "$2"
-		then
-			test_ok_ "$1"
-		else
-			test_failure_ "$@"
-		fi
-	fi
-	echo >&3 ""
-}
-
-# test_external runs external test scripts that provide continuous
-# test output about their progress, and succeeds/fails on
-# zero/non-zero exit code.  It outputs the test output on stdout even
-# in non-verbose mode, and announces the external script with "# run
-# <n>: ..." before running it.  When providing relative paths, keep in
-# mind that all scripts run in "trash directory".
-# Usage: test_external description command arguments...
-# Example: test_external 'Perl API' perl ../path/to/test.pl
-test_external () {
-	test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
-	test "$#" = 3 ||
-	error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
-	descr="$1"
-	shift
-	export test_prereq
-	if ! test_skip "$descr" "$@"
-	then
-		# Announce the script to reduce confusion about the
-		# test output that follows.
-		say_color "" "# run $test_count: $descr ($*)"
-		# Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG
-		# to be able to use them in script
-		export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG
-		# Run command; redirect its stderr to &4 as in
-		# test_run_, but keep its stdout on our stdout even in
-		# non-verbose mode.
-		"$@" 2>&4
-		if [ "$?" = 0 ]
-		then
-			if test $test_external_has_tap -eq 0; then
-				test_ok_ "$descr"
-			else
-				say_color "" "# test_external test $descr was ok"
-				test_success=$(($test_success + 1))
-			fi
-		else
-			if test $test_external_has_tap -eq 0; then
-				test_failure_ "$descr" "$@"
-			else
-				say_color error "# test_external test $descr failed: $@"
-				test_failure=$(($test_failure + 1))
-			fi
-		fi
-	fi
-}
-
-# Like test_external, but in addition tests that the command generated
-# no output on stderr.
-test_external_without_stderr () {
-	# The temporary file has no (and must have no) security
-	# implications.
-	tmp=${TMPDIR:-/tmp}
-	stderr="$tmp/git-external-stderr.$$.tmp"
-	test_external "$@" 4> "$stderr"
-	[ -f "$stderr" ] || error "Internal error: $stderr disappeared."
-	descr="no stderr: $1"
-	shift
-	say >&3 "# expecting no stderr from previous command"
-	if [ ! -s "$stderr" ]; then
-		rm "$stderr"
-
-		if test $test_external_has_tap -eq 0; then
-			test_ok_ "$descr"
-		else
-			say_color "" "# test_external_without_stderr test $descr was ok"
-			test_success=$(($test_success + 1))
-		fi
-	else
-		if [ "$verbose" = t ]; then
-			output=`echo; echo "# Stderr is:"; cat "$stderr"`
-		else
-			output=
-		fi
-		# rm first in case test_failure exits.
-		rm "$stderr"
-		if test $test_external_has_tap -eq 0; then
-			test_failure_ "$descr" "$@" "$output"
-		else
-			say_color error "# test_external_without_stderr test $descr failed: $@: $output"
-			test_failure=$(($test_failure + 1))
-		fi
-	fi
-}
-
-# debugging-friendly alternatives to "test [-f|-d|-e]"
-# The commands test the existence or non-existence of $1. $2 can be
-# given to provide a more precise diagnosis.
-test_path_is_file () {
-	if ! [ -f "$1" ]
-	then
-		echo "File $1 doesn't exist. $*"
-		false
-	fi
-}
-
-test_path_is_dir () {
-	if ! [ -d "$1" ]
-	then
-		echo "Directory $1 doesn't exist. $*"
-		false
-	fi
-}
-
-test_path_is_missing () {
-	if [ -e "$1" ]
-	then
-		echo "Path exists:"
-		ls -ld "$1"
-		if [ $# -ge 1 ]; then
-			echo "$*"
-		fi
-		false
-	fi
-}
-
-# test_line_count checks that a file has the number of lines it
-# ought to. For example:
-#
-#	test_expect_success 'produce exactly one line of output' '
-#		do something >output &&
-#		test_line_count = 1 output
-#	'
-#
-# is like "test $(wc -l <output) = 1" except that it passes the
-# output through when the number of lines is wrong.
-
-test_line_count () {
-	if test $# != 3
-	then
-		error "bug in the test script: not 3 parameters to test_line_count"
-	elif ! test $(wc -l <"$3") "$1" "$2"
-	then
-		echo "test_line_count: line count for $3 !$1 $2"
-		cat "$3"
-		return 1
-	fi
-}
-
-# This is not among top-level (test_expect_success | test_expect_failure)
-# but is a prefix that can be used in the test script, like:
-#
-#	test_expect_success 'complain and die' '
-#           do something &&
-#           do something else &&
-#	    test_must_fail git checkout ../outerspace
-#	'
-#
-# Writing this as "! git checkout ../outerspace" is wrong, because
-# the failure could be due to a segv.  We want a controlled failure.
-
-test_must_fail () {
-	"$@"
-	exit_code=$?
-	if test $exit_code = 0; then
-		echo >&2 "test_must_fail: command succeeded: $*"
-		return 1
-	elif test $exit_code -gt 129 -a $exit_code -le 192; then
-		echo >&2 "test_must_fail: died by signal: $*"
-		return 1
-	elif test $exit_code = 127; then
-		echo >&2 "test_must_fail: command not found: $*"
-		return 1
-	fi
-	return 0
-}
-
-# Similar to test_must_fail, but tolerates success, too.  This is
-# meant to be used in contexts like:
-#
-#	test_expect_success 'some command works without configuration' '
-#		test_might_fail git config --unset all.configuration &&
-#		do something
-#	'
-#
-# Writing "git config --unset all.configuration || :" would be wrong,
-# because we want to notice if it fails due to segv.
-
-test_might_fail () {
-	"$@"
-	exit_code=$?
-	if test $exit_code -gt 129 -a $exit_code -le 192; then
-		echo >&2 "test_might_fail: died by signal: $*"
-		return 1
-	elif test $exit_code = 127; then
-		echo >&2 "test_might_fail: command not found: $*"
-		return 1
-	fi
-	return 0
-}
-
-# Similar to test_must_fail and test_might_fail, but check that a
-# given command exited with a given exit code. Meant to be used as:
-#
-#	test_expect_success 'Merge with d/f conflicts' '
-#		test_expect_code 1 git merge "merge msg" B master
-#	'
-
-test_expect_code () {
-	want_code=$1
-	shift
-	"$@"
-	exit_code=$?
-	if test $exit_code = $want_code
-	then
-		return 0
-	fi
-
-	echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
-	return 1
-}
-
-# test_cmp is a helper function to compare actual and expected output.
-# You can use it like:
-#
-#	test_expect_success 'foo works' '
-#		echo expected >expected &&
-#		foo >actual &&
-#		test_cmp expected actual
-#	'
-#
-# This could be written as either "cmp" or "diff -u", but:
-# - cmp's output is not nearly as easy to read as diff -u
-# - not all diff versions understand "-u"
-
-test_cmp() {
-	$GIT_TEST_CMP "$@"
-}
-
-# This function can be used to schedule some commands to be run
-# unconditionally at the end of the test to restore sanity:
-#
-#	test_expect_success 'test core.capslock' '
-#		git config core.capslock true &&
-#		test_when_finished "git config --unset core.capslock" &&
-#		hello world
-#	'
-#
-# That would be roughly equivalent to
-#
-#	test_expect_success 'test core.capslock' '
-#		git config core.capslock true &&
-#		hello world
-#		git config --unset core.capslock
-#	'
-#
-# except that the greeting and config --unset must both succeed for
-# the test to pass.
-#
-# Note that under --immediate mode, no clean-up is done to help diagnose
-# what went wrong.
-
-test_when_finished () {
-	test_cleanup="{ $*
-		} && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
-}
-
-# Most tests can use the created repository, but some may need to create more.
-# Usage: test_create_repo <directory>
-test_create_repo () {
-	test "$#" = 1 ||
-	error "bug in the test script: not 1 parameter to test-create-repo"
-	repo="$1"
-	mkdir -p "$repo"
-	(
-		cd "$repo" || error "Cannot setup test environment"
-		"$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
-		error "cannot run git init -- have you built things yet?"
-		mv .git/hooks .git/hooks-disabled
-	) || exit
 }
 
 test_done () {
-- 
1.7.9.1.334.gd1409