* [PATCH v2] completion: add new zsh completion
@ 2012-01-30 17:40 Felipe Contreras
0 siblings, 0 replies; only message in thread
From: Felipe Contreras @ 2012-01-30 17:40 UTC (permalink / raw)
To: git; +Cc: Felipe Contreras
From: Felipe Contreras <felipe.contreras@gmail.com>
It seems there's always issues with zsh's bash completion emulation,
after I took a deep look at the code, I found many issues[1].
So, here is a kind of wrapper that does the same, but properly :)
This would also allow us to make fixes if necessary, since the code is
simple enough, and extend functionality.
[1] http://article.gmane.org/gmane.comp.shells.zsh.devel/24290
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
---
v2:
* Fix completion of aliased commands
* Add check for wrong commands
* Properly set return codes
* Add default actiooon; for 'git foo -- <tab>'
contrib/completion/git-completion.zsh | 181 +++++++++++++++++++++++++++++++++
1 files changed, 181 insertions(+), 0 deletions(-)
create mode 100644 contrib/completion/git-completion.zsh
diff --git a/contrib/completion/git-completion.zsh b/contrib/completion/git-completion.zsh
new file mode 100644
index 0000000..bca08f2
--- /dev/null
+++ b/contrib/completion/git-completion.zsh
@@ -0,0 +1,181 @@
+#compdef git gitk
+
+# zsh completion wrapper for git
+#
+# You need git's bash completion script installed somewhere, by default on the
+# same directory as this script.
+#
+# If your script is on ~/.git-completion.sh instead, you can configure it on
+# your ~/.zshrc:
+#
+# zstyle ':completion:*:*:git:*' script ~/.git-completion.sh
+#
+# The recommended way to install this script is to copy to
+# '~/.zsh/completion/_git', and then add the following to your ~/.zshrc file:
+#
+# fpath=(~/.zsh/completion $fpath)
+
+compgen () {
+ local prefix suffix
+ local -a results
+ while getopts "W:P:S:" opt
+ do
+ case $opt in
+ W)
+ results=( ${(Q)~=OPTARG} )
+ ;;
+ P)
+ prefix="$OPTARG"
+ ;;
+ S)
+ suffix="$OPTARG"
+ ;;
+ esac
+ done
+ print -l -r -- "$prefix${^results[@]}$suffix"
+}
+
+complete () {
+ # do nothing
+ return 0
+}
+
+zstyle -s ":completion:$curcontext:" script script
+test -z "$script" && script="$(dirname ${funcsourcetrace[1]%:*})"/git-completion.bash
+ZSH_VERSION='' . "$script"
+
+_get_comp_words_by_ref ()
+{
+ while [ $# -gt 0 ]; do
+ case "$1" in
+ cur)
+ cur=${_words[CURRENT]}
+ ;;
+ prev)
+ cur=${_words[CURRENT-1]}
+ ;;
+ words)
+ words=("${_words[@]}")
+ ;;
+ cword)
+ ((cword = CURRENT - 1))
+ ;;
+ esac
+ shift
+ done
+}
+
+_bash_wrap ()
+{
+ local -a COMPREPLY results _words
+ _words=( $words )
+ () {
+ emulate -L sh
+ setopt KSH_TYPESET
+ setopt kshglob noshglob braceexpand nokshautoload
+ typeset -h words
+ local cur words cword prev
+ _get_comp_words_by_ref -n =: cur words cword prev
+ $1
+ } $1
+ results=( "${^COMPREPLY[@]}" )
+ if [[ -n $results ]]; then
+ local COMP_WORDBREAKS="\"'@><=;|&(:"
+ local i start
+ local cur="${words[CURRENT]}"
+ i=$(expr index "$cur" "$COMP_WORDBREAKS")
+ start="${cur:0:$i}"
+ compadd -Q -S '' -p "$start" -a results && ret=0
+ fi
+ if (( ret )); then
+ _default -S '' && ret=0
+ fi
+}
+
+_gitk ()
+{
+ __git_has_doubledash && return
+
+ local g="$(__gitdir)"
+ local merge=""
+ if [ -f "$g/MERGE_HEAD" ]; then
+ merge="--merge"
+ fi
+ case "$cur" in
+ --*)
+ __gitcomp "
+ $__git_log_common_options
+ $__git_log_gitk_options
+ $merge
+ "
+ return
+ ;;
+ esac
+ __git_complete_revlist
+}
+
+_get_completion_func ()
+{
+ emulate -L sh
+ setopt KSH_TYPESET
+ local command="$1"
+
+ completion_func="_git_${command//-/_}"
+ declare -f $completion_func >/dev/null && return
+
+ local expansion=$(__git_aliased_command "$command")
+ if [ -n "$expansion" ]; then
+ completion_func="_git_${expansion//-/_}"
+ declare -f $completion_func >/dev/null && return
+ fi
+
+ completion_func=
+}
+
+_git ()
+{
+ local ret=1
+
+ if [[ $service != git ]]
+ then
+ _bash_wrap _$service
+ return ret
+ fi
+
+ local curcontext="$curcontext" state state_descr line
+ typeset -A opt_args
+
+ _arguments -C \
+ '(-p --paginate --no-pager)'{-p,--paginate}'[Pipe all output into ''less'']' \
+ '(-p --paginate)--no-pager[Do not pipe git output into a pager]' \
+ '--git-dir=-[Set the path to the repository]: :_directories' \
+ '--bare[Treat the repository as a bare repository]' \
+ '(- :)--version[Prints the git suite version]' \
+ '--exec-path=-[Path to where your core git programs are installed]:: :_directories' \
+ '--html-path[Print the path where git''s HTML documentation is installed]' \
+ '--work-tree=-[Set the path to the working tree]: :_directories' \
+ '--namespace=-[Set the git namespace]: :_directories' \
+ '(- :)--help[Prints the synopsis and a list of the most commonly used commands]' \
+ '(-): :->command' \
+ '(-)*:: :->option-or-argument' && return 0
+
+ case $state in
+ (command)
+ emulate sh -c __git_compute_porcelain_commands
+ local -a porcelain aliases
+ porcelain=( ${=__git_porcelain_commands} )
+ aliases=( $(__git_aliases) )
+ _describe -t porcelain-commands 'porcelain commands' porcelain && ret=0
+ _describe -t aliases 'aliases' aliases && ret=0
+ ;;
+ (option-or-argument)
+ local completion_func
+ _get_completion_func "${words[1]}"
+ test "$completion_func" && _bash_wrap $completion_func
+ ;;
+ esac
+
+ return ret
+}
+
+_git
--
1.7.8
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-01-30 17:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-30 17:40 [PATCH v2] completion: add new zsh completion Felipe Contreras
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).