* Duration of recorded file is longer than recording time using SoX @ 2019-12-16 2:39 George S. Williams 2019-12-16 16:14 ` Jeremy Nicoll - ml sox users 0 siblings, 1 reply; 6+ messages in thread From: George S. Williams @ 2019-12-16 2:39 UTC (permalink / raw) To: sox-users [-- Attachment #1.1: Type: text/plain, Size: 743 bytes --] I'm using SoX on Centos 7 to record the audio output from GQRX, a SDR application. I've selected Monitor of Built-in Audio Analog Stereo from the Recording Tab of the Pulseaudio Volume Control. I'm trying to save a .wav file with a sample rate of 6k. I'm using the command |sox -t pulseaudio 2 --rate 6k --channels 1 test.wav | This works and my test.wav is what I expect except that the duration of the file is about a third longer than the actual recording time. 3 hours and 15 minutes of recording time results in a file with a duration of 4 hours and 21 minutes. I couldn't find anything online or in the SoX documentation concerning this. Is there something else I can try to make the wave the actual length of the recording? [-- Attachment #1.2: Type: text/html, Size: 1004 bytes --] [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 158 bytes --] _______________________________________________ Sox-users mailing list Sox-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sox-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Duration of recorded file is longer than recording time using SoX 2019-12-16 2:39 Duration of recorded file is longer than recording time using SoX George S. Williams @ 2019-12-16 16:14 ` Jeremy Nicoll - ml sox users [not found] ` <f1382121-d632-9252-17a8-e7baed8913f2@websterling.com> 0 siblings, 1 reply; 6+ messages in thread From: Jeremy Nicoll - ml sox users @ 2019-12-16 16:14 UTC (permalink / raw) To: sox-users On 2019-12-16 02:39, George S. Williams wrote: > I'm using SoX on Centos 7 to record the audio output from GQRX, a SDR > application. I've selected Monitor of Built-in Audio Analog Stereo > from the Recording Tab of the Pulseaudio Volume Control. I'm trying to > save a .wav file with a sample rate of 6k. I'm using the command > > |sox -t pulseaudio 2 --rate 6k --channels 1 test.wav | Does the presence of the 'pipe' character before "sox" mean that audio was being generated by a previous command? If so, although you may think you terminated the recording after a certain time, maybe that program still sent data to sox? Or maybe sent data before you though you started the recording? In your "too long" wave file, does it start with 1h 6m of something else, or end with 1h 6m of something else? Or what? -- Jeremy Nicoll - my opinions are my own _______________________________________________ Sox-users mailing list Sox-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sox-users ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <f1382121-d632-9252-17a8-e7baed8913f2@websterling.com>]
* Re: Duration of recorded file is longer than recording time using SoX [not found] ` <f1382121-d632-9252-17a8-e7baed8913f2@websterling.com> @ 2019-12-16 20:53 ` Jeremy Nicoll - ml sox users 2019-12-25 21:23 ` Jan Stary 0 siblings, 1 reply; 6+ messages in thread From: Jeremy Nicoll - ml sox users @ 2019-12-16 20:53 UTC (permalink / raw) To: ML - sox-users On 2019-12-16 16:44, George S. Williams wrote: > On 12/16/2019 11:14 AM, Jeremy Nicoll - ml sox users wrote: >> On 2019-12-16 02:39, George S. Williams wrote: >>> I'm using SoX on Centos 7 to record the audio output from GQRX, a SDR >>> application. I've selected Monitor of Built-in Audio Analog Stereo >>> from the Recording Tab of the Pulseaudio Volume Control. I'm trying >>> to >>> save a .wav file with a sample rate of 6k. I'm using the command >>> >>> |sox -t pulseaudio 2 --rate 6k --channels 1 test.wav | >> Does the presence of the 'pipe' character before "sox" mean that audio >> was being generated by a previous command? >> >> If so, although you may think you terminated the recording after a >> certain time, maybe that program still sent data to sox? Or maybe >> sent data before you though you started the recording? >> >> In your "too long" wave file, does it start with 1h 6m of something >> else, or end with 1h 6m of something else? Or what? > The command is run by itself- the pipe characters are a consequence of > copying and pasting that I didn't catch. > > The wave file contains what was recorded, nothing extra. It is > 'stretched' to the longer duration. George's reply to me was, it seems, off-list. Don't know why. I'm replying on-list. What does soxi say about the wave file? Does the file have the file-size you'd expect for the single channel, unknown (to us anyway) bit depth, 6000 samples per second? Is what's in the file a recording of something (music, speech?) that sounds 'sensible' to a human, or is it some sort of scientific data that one can't tell about (by ear)? Does the header info in the wav file contain the right descriptive info for the data? -- Jeremy Nicoll - my opinions are my own _______________________________________________ Sox-users mailing list Sox-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sox-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Duration of recorded file is longer than recording time using SoX 2019-12-16 20:53 ` Jeremy Nicoll - ml sox users @ 2019-12-25 21:23 ` Jan Stary 2019-12-26 1:02 ` George S. Williams 0 siblings, 1 reply; 6+ messages in thread From: Jan Stary @ 2019-12-25 21:23 UTC (permalink / raw) To: sox-users > > > > I'm using SoX on Centos 7 to record the audio output from GQRX, a SDR > > > > application. I've selected Monitor of Built-in Audio Analog Stereo > > > > from the Recording Tab of the Pulseaudio Volume Control. I'm > > > > trying to > > > > save a .wav file with a sample rate of 6k. I'm using the command > > > > > > > > |sox -t pulseaudio 2 --rate 6k --channels 1 test.wav | > > > Does the presence of the 'pipe' character before "sox" mean that audio > > > was being generated by a previous command? > > The command is run by itself- the pipe characters are a consequence of > > copying and pasting that I didn't catch. OK, sou you start sox -t pulseaudio 2 --rate 6k --channels 1 test.wav at a terminal, and then start GQRX (whatever that is) to produce its output, and have PulseAudio (the system audio framwork) monitor the GQRX output as a recording. So that's what SoX gets. Right? But that is not a valid SoX command line. In SoX SYNOPSIS parlance, what is the "infile"? And what is "pulseaudio 2"? The "-t pulseaudio" specifies the type (-t); what is the "2"? Can you please post the output of your actual command line with sox -V3 (for verbosity)? Also, a command line like that will not stop recording its input just because the other side has stopped producing output (as opposed to reading a file as input). So how exactly is the above SoX process terminated? > > > In your "too long" wave file, does it start with 1h 6m of something > > > else, or end with 1h 6m of something else? Or what? > > > > The wave file contains what was recorded, nothing extra. It is > > 'stretched' to the longer duration. How can it "contain what was recorded, nothing extra" and at the same time be of different length? Is it the rate change? That is, are you recording a 6kHz channel at the specified rate of 6kHz? Jan _______________________________________________ Sox-users mailing list Sox-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sox-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Duration of recorded file is longer than recording time using SoX 2019-12-25 21:23 ` Jan Stary @ 2019-12-26 1:02 ` George S. Williams 2019-12-28 15:52 ` Jan Stary 0 siblings, 1 reply; 6+ messages in thread From: George S. Williams @ 2019-12-26 1:02 UTC (permalink / raw) To: sox-users On 12/25/2019 4:23 PM, Jan Stary wrote: >>>>> I'm using SoX on Centos 7 to record the audio output from GQRX, a SDR >>>>> application. I've selected Monitor of Built-in Audio Analog Stereo >>>>> from the Recording Tab of the Pulseaudio Volume Control. I'm >>>>> trying to >>>>> save a .wav file with a sample rate of 6k. I'm using the command >>>>> >>>>> |sox -t pulseaudio 2 --rate 6k --channels 1 test.wav | >>>> Does the presence of the 'pipe' character before "sox" mean that audio >>>> was being generated by a previous command? >>> The command is run by itself- the pipe characters are a consequence of >>> copying and pasting that I didn't catch. > OK, sou you start > > sox -t pulseaudio 2 --rate 6k --channels 1 test.wav > > at a terminal, and then start GQRX (whatever that is) to produce its > output, and have PulseAudio (the system audio framwork) monitor > the GQRX output as a recording. So that's what SoX gets. Right? > > But that is not a valid SoX command line. In SoX SYNOPSIS parlance, > what is the "infile"? And what is "pulseaudio 2"? The "-t pulseaudio" > specifies the type (-t); what is the "2"? GQRX is a SDR (Software Defined Radio) application, as was mentioned in the OP pulseaudio is a AUDIO DEVICE DRIVER, 2 is the device being monitored See, for example, 'sox -h' > Can you please post the output of your actual command line > with sox -V3 (for verbosity)? > > Also, a command line like that will not stop recording its input > just because the other side has stopped producing output > (as opposed to reading a file as input). So how exactly > is the above SoX process terminated? SoX is terrminated with Ctrl-C >>>> In your "too long" wave file, does it start with 1h 6m of something >>>> else, or end with 1h 6m of something else? Or what? >>> The wave file contains what was recorded, nothing extra. It is >>> 'stretched' to the longer duration. > How can it "contain what was recorded, nothing extra" > and at the same time be of different length? Is it the > rate change? That is, are you recording a 6kHz channel > at the specified rate of 6kHz? The problem seems to be either with GQRX or Pulseaudio- probably not SoX. Using a different SDR and piping its output to SoX works fine, so I'm no longer working on this problem. Thanks for the reply, but why the attitude? George > > Jan > > > > _______________________________________________ > Sox-users mailing list > Sox-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sox-users _______________________________________________ Sox-users mailing list Sox-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sox-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Duration of recorded file is longer than recording time using SoX 2019-12-26 1:02 ` George S. Williams @ 2019-12-28 15:52 ` Jan Stary 0 siblings, 0 replies; 6+ messages in thread From: Jan Stary @ 2019-12-28 15:52 UTC (permalink / raw) To: sox-users > > Also, a command line like that will not stop recording its input > > just because the other side has stopped producing output > > (as opposed to reading a file as input). So how exactly > > is the above SoX process terminated? > SoX is terrminated with Ctrl-C In that case, the sox recording will be as long as the time between start and the ctrl-c termination (give or take a buffer or two). > > > > > In your "too long" wave file, does it start with 1h 6m of something > > > > > else, or end with 1h 6m of something else? Or what? > > > > The wave file contains what was recorded, nothing extra. It is > > > > 'stretched' to the longer duration. What do you mean by that. Does it play slower? Then I would suspect a sample rate mismatch - hard to tell without actual soxi or sox -V output. > > How can it "contain what was recorded, nothing extra" > > and at the same time be of different length? Is it the > > rate change? That is, are you recording a 6kHz channel > > at the specified rate of 6kHz? Jan _______________________________________________ Sox-users mailing list Sox-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sox-users ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-12-28 15:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-16 2:39 Duration of recorded file is longer than recording time using SoX George S. Williams
2019-12-16 16:14 ` Jeremy Nicoll - ml sox users
[not found] ` <f1382121-d632-9252-17a8-e7baed8913f2@websterling.com>
2019-12-16 20:53 ` Jeremy Nicoll - ml sox users
2019-12-25 21:23 ` Jan Stary
2019-12-26 1:02 ` George S. Williams
2019-12-28 15:52 ` Jan Stary
Code repositories for project(s) associated with this public inbox https://80x24.org/mirrors/sox.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).