* [PATCH 38/82] imap: support out-of-bounds ranges
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
@ 2020-06-10 7:04 7% ` Eric Wong
0 siblings, 0 replies; 2+ results
From: Eric Wong @ 2020-06-10 7:04 UTC (permalink / raw)
To: meta
"$UID_START:*" needs to return at least one message according
to RFC 3501 section 6.4.8.
While we're in the area, coerce ranges to (unsigned) integers by
adding zero ("+ 0") to reduce memory overhead.
---
lib/PublicInbox/IMAP.pm | 8 +++++---
t/imapd.t | 13 +++++++++++++
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/lib/PublicInbox/IMAP.pm b/lib/PublicInbox/IMAP.pm
index 3815141a15e..ffa76bb0266 100644
--- a/lib/PublicInbox/IMAP.pm
+++ b/lib/PublicInbox/IMAP.pm
@@ -455,11 +455,13 @@ sub range_step ($$) {
$$range_csv = undef;
}
if ($range =~ /\A([0-9]+):([0-9]+)\z/) {
- ($beg, $end) = ($1, $2);
+ ($beg, $end) = ($1 + 0, $2 + 0);
} elsif ($range =~ /\A([0-9]+):\*\z/) {
- ($beg, $end) = ($1, $ibx->mm->max // 0);
+ $beg = $1 + 0;
+ $end = $ibx->mm->max // 0;
+ $beg = $end if $beg > $end;
} elsif ($range =~ /\A[0-9]+\z/) {
- $beg = $end = $range;
+ $beg = $end = $range + 0;
} else {
return 'BAD fetch range';
}
diff --git a/t/imapd.t b/t/imapd.t
index 3d0be340846..2c4315dec30 100644
--- a/t/imapd.t
+++ b/t/imapd.t
@@ -116,6 +116,19 @@ $ret = $mic->search('uid 1:*') or BAIL_OUT "SEARCH FAIL $@";
is_deeply($ret, [ 1 ], 'search UID 1:* works');
is_deeply(scalar $mic->flags('1'), [], '->flags works');
+{
+ # RFC 3501 section 6.4.8 states:
+ # Also note that a UID range of 559:* always includes the
+ # UID of the last message in the mailbox, even if 559 is
+ # higher than any assigned UID value.
+ my $exp = $mic->fetch_hash(1, 'UID');
+ $ret = $mic->fetch_hash('559:*', 'UID');
+ is_deeply($ret, $exp, 'beginning range too big');
+ for my $r (qw(559:558 558:559)) {
+ $ret = $mic->fetch_hash($r, 'UID');
+ is_deeply($ret, {}, "out-of-range UID FETCH $r");
+ }
+}
for my $r ('1:*', '1') {
$ret = $mic->fetch_hash($r, 'RFC822') or BAIL_OUT "FETCH $@";
^ permalink raw reply related [relevance 7%]
* [PATCH 00/82] public-inbox-imapd: read-only IMAP server
@ 2020-06-10 7:03 5% Eric Wong
2020-06-10 7:04 7% ` [PATCH 38/82] imap: support out-of-bounds ranges Eric Wong
0 siblings, 1 reply; 2+ results
From: Eric Wong @ 2020-06-10 7:03 UTC (permalink / raw)
To: meta
So I finally wrote my first IMAP server! And I'm actually
fairly satisfied with how it's turning out to support a bunch
of other performance + scalability work I've wanted to do.
Some previous notes here:
https://public-inbox.org/meta/20200609113442.GA16856@dcvr/
I finally seem to have gotten it to play nicely with mutt header
caching, so it's fit for public consumption :)
imaps://news.public-inbox.org/INBOX.comp.mail.public-inbox.meta.0
You can use any username+password, and AUTH=ANONYMOUS also
works if your client does that.
It doesn't support UTF-7 (mailbox names) or advertise UTF-8
in CAPABILITIES, yet; I still have RFCs to read :P
And there's a bunch of new things which could use some
testing from non-mutt/mbsync/offlineimap users.
Maybe you'll find some client-side bugs like I did :P
v1 reindexing also gets a little bit of parallelism :)
Anyways, I'll probably be porting some of the scalability
and slow-storage work to older parts of the code before
fiddling with more IMAP extensions.
Eric Wong (82):
doc: add some IMAP standards
nntpd: restrict allowed newsgroup names
preliminary imap server implementation
inboxidle: new class to detect inbox changes
imap: support IDLE
msgmap: split ->max into its own method
imap: delay InboxIdle start, support refresh
imap: implement STATUS command
imap: use Text::ParseWords::parse_line to handle quoted words
imap: support LIST command
t/imapd: support FakeInotify and KQNotify
imap: support fetch for BODYSTRUCTURE and BODY
eml: each_part: single part $idx is 1
imap: allow fetch of partial of BODY[...] and headers
imap: always include `resp-text' in responses
imap: split out unit tests and benchmarks
imap: fix multi-message partial header fetches
imap: simplify partial fetch structure
imap: support sequence number FETCH
imap: do not include ".PEEK" in responses
imap: support the CLOSE command
imap: speed up HEADER.FIELDS[.NOT] range fetches
git: async: flatten the inflight array
git: do our own read buffering for cat-file
imap: use git-cat-file asynchronously
git: idle rbuf for async
imap: support LSUB command
imap: FETCH: support comma-delimited ranges
add imapd compression test
testcommon: tcp_(server|connect): BAIL_OUT on failure
*deflate: drop invalid comment about rbuf
imap: fix pipelining with async git
git: cat_async: provide requested OID + "missing" on missing blobs
git: move async_cat reference to PublicInbox::Git
git: async: automatic retry on alternates change
imapclient: wrapper for Mail::IMAPClient
xt: add imapd-validate and imapd-mbsync-oimap
imap: support out-of-bounds ranges
xt/perf-imap-list: time refresh_inboxlist
imap: case-insensitive mailbox name comparisons
imap: break giant inboxes into sub-inboxes of 50K messages
imap: start introducing iterative config reloading
imap: require ".$UID_MIN-$UID_END" suffix
imapd: ensure LIST is sorted alphabetically, for now
imap: omit $UID_END from mailbox name, use index
t/config.t: always compare against git bool behavior
xt/*: show some tunable parameters
imap: STATUS and LIST are case-insensitive, too
imap: EXAMINE/STATUS: return correct counts
imap: avoid uninitialized warnings on incomplete commands
imap: start parsing out queries for SQLite and Xapian
imap: SEARCH: clamp results to the 50K UID range
imap: allow UID range search on timestamps
over: get_art: use dbh->prepare_cached
search: index byte size of a message for IMAP search
search: index UID for IMAP search, too
imap: remove dummies from sequence number FETCH
imap: compile UID FETCH to opcodes
imap: UID FETCH: optimize for smsg-only case
imap: UID FETCH: optimize (UID FLAGS) harder
imap: IDLE: avoid extraneous wakeups, keep-alive
imap: 30 minute auto-logout timer
imap: split ->logged_in attribute into a separate class
searchidx: v1 (re)-index uses git asynchronously
index: account for CRLF conversion when storing bytes
imap: rely on smsg->{bytes} for RFC822.SIZE
imap: UID FETCH requires at least one data item
imap: LIST shows "INBOX" in all caps
imap: support 8000 octet lines
imap: reinstate some message sequence number support
imap: cleanup ->{uid_base} usage
imap: FETCH: more granular CRLF conversion
imap: further speed up HEADER.FIELDS FETCH requests
imap: FETCH: try to make fake MSNs sequentially
imap: STATUS/EXAMINE: rely on SQLite overview
imap: UID SEARCH: support multiple ranges
imap: wire up Xapian search, msn SEARCH and multiple ranges
imap: misc cleanups and notes
imapd: don't bother sorting LIST output
imap: drop non-UID SEARCH for now
over: uid_range: remove LIMIT
imap: FETCH: proper MSN => UID mapping for requests
Documentation/public-inbox-imapd.pod | 91 ++
Documentation/standards.perl | 10 +
MANIFEST | 18 +
lib/PublicInbox/Config.pm | 18 +
lib/PublicInbox/Daemon.pm | 24 +-
lib/PublicInbox/DummyInbox.pm | 22 +
lib/PublicInbox/Eml.pm | 9 +-
lib/PublicInbox/FakeInotify.pm | 59 ++
lib/PublicInbox/Git.pm | 163 +--
lib/PublicInbox/GitAsyncCat.pm | 51 +
lib/PublicInbox/IMAP.pm | 1397 ++++++++++++++++++++++++++
lib/PublicInbox/IMAPClient.pm | 119 +++
lib/PublicInbox/IMAPD.pm | 114 +++
lib/PublicInbox/IMAPdeflate.pm | 126 +++
lib/PublicInbox/Import.pm | 2 +-
lib/PublicInbox/In2Tie.pm | 17 +
lib/PublicInbox/Inbox.pm | 33 +-
lib/PublicInbox/InboxIdle.pm | 79 ++
lib/PublicInbox/KQNotify.pm | 66 ++
lib/PublicInbox/Lock.pm | 7 +
lib/PublicInbox/MsgIter.pm | 2 +-
lib/PublicInbox/Msgmap.pm | 20 +-
lib/PublicInbox/NNTPD.pm | 12 +-
lib/PublicInbox/NNTPdeflate.pm | 1 -
lib/PublicInbox/Over.pm | 50 +-
lib/PublicInbox/Search.pm | 32 +-
lib/PublicInbox/SearchIdx.pm | 89 +-
lib/PublicInbox/SearchIdxShard.pm | 11 +-
lib/PublicInbox/Smsg.pm | 8 +-
lib/PublicInbox/TestCommon.pm | 7 +-
lib/PublicInbox/V2Writable.pm | 10 +-
script/public-inbox-imapd | 14 +
t/config.t | 15 +-
t/eml.t | 2 +-
t/git.t | 40 +-
t/imap.t | 133 +++
t/imapd-tls.t | 204 ++++
t/imapd.t | 398 ++++++++
t/import.t | 5 +-
t/inbox_idle.t | 72 ++
t/nntpd.t | 5 +-
t/over.t | 3 +
t/search.t | 19 +
xt/cmp-msgstr.t | 1 -
xt/cmp-msgview.t | 1 -
xt/eml_check_limits.t | 6 +-
xt/git_async_cmp.t | 2 +-
xt/imapd-mbsync-oimap.t | 132 +++
xt/imapd-validate.t | 177 ++++
xt/mem-msgview.t | 1 +
xt/msgtime_cmp.t | 1 -
xt/perf-msgview.t | 1 -
52 files changed, 3718 insertions(+), 181 deletions(-)
create mode 100644 Documentation/public-inbox-imapd.pod
create mode 100644 lib/PublicInbox/DummyInbox.pm
create mode 100644 lib/PublicInbox/FakeInotify.pm
create mode 100644 lib/PublicInbox/GitAsyncCat.pm
create mode 100644 lib/PublicInbox/IMAP.pm
create mode 100644 lib/PublicInbox/IMAPClient.pm
create mode 100644 lib/PublicInbox/IMAPD.pm
create mode 100644 lib/PublicInbox/IMAPdeflate.pm
create mode 100644 lib/PublicInbox/In2Tie.pm
create mode 100644 lib/PublicInbox/InboxIdle.pm
create mode 100644 lib/PublicInbox/KQNotify.pm
create mode 100644 script/public-inbox-imapd
create mode 100644 t/imap.t
create mode 100644 t/imapd-tls.t
create mode 100644 t/imapd.t
create mode 100644 t/inbox_idle.t
create mode 100644 xt/imapd-mbsync-oimap.t
create mode 100644 xt/imapd-validate.t
^ permalink raw reply [relevance 5%]
Results 1-2 of 2 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
2020-06-10 7:04 7% ` [PATCH 38/82] imap: support out-of-bounds ranges Eric Wong
Code repositories for project(s) associated with this public inbox
https://80x24.org/public-inbox.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).