* [PATCH 22/82] imap: speed up HEADER.FIELDS[.NOT] range fetches
2020-06-10 7:03 6% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
@ 2020-06-10 7:04 7% ` Eric Wong
0 siblings, 0 replies; 2+ results
From: Eric Wong @ 2020-06-10 7:04 UTC (permalink / raw)
To: meta
While we can't memoize the regexp forever like we do with other
Eml users, we can still benefit from caching regexp compilation
on a per-request basis.
A FETCH request from mutt on a 4K message inbox is around 8%
faster after this. Since regexp compilation via qr// isn't
unbearably slow, a shared cache probably isn't worth the
trouble of implementing. A per-request cache seems enough.
---
lib/PublicInbox/IMAP.pm | 17 ++++++++---------
t/imap.t | 10 +++++++---
2 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/lib/PublicInbox/IMAP.pm b/lib/PublicInbox/IMAP.pm
index 0852ffab868..39667199080 100644
--- a/lib/PublicInbox/IMAP.pm
+++ b/lib/PublicInbox/IMAP.pm
@@ -544,25 +544,23 @@ sub hdrs_regexp ($) {
# BODY[($SECTION_IDX.)?HEADER.FIELDS.NOT ($HDRS)]<$offset.$bytes>
sub partial_hdr_not {
- my ($eml, $section_idx, $hdrs) = @_;
+ my ($eml, $section_idx, $hdrs_re) = @_;
if (defined $section_idx) {
$eml = eml_body_idx($eml, $section_idx) or return;
}
my $str = $eml->header_obj->as_string;
- my $re = hdrs_regexp($hdrs);
- $str =~ s/$re//g;
+ $str =~ s/$hdrs_re//g;
$str .= "\r\n";
}
# BODY[($SECTION_IDX.)?HEADER.FIELDS ($HDRS)]<$offset.$bytes>
sub partial_hdr_get {
- my ($eml, $section_idx, $hdrs) = @_;
+ my ($eml, $section_idx, $hdrs_re) = @_;
if (defined $section_idx) {
$eml = eml_body_idx($eml, $section_idx) or return;
}
my $str = $eml->header_obj->as_string;
- my $re = hdrs_regexp($hdrs);
- join('', ($str =~ m/($re)/g), "\r\n");
+ join('', ($str =~ m/($hdrs_re)/g), "\r\n");
}
sub partial_prepare ($$$) {
@@ -583,9 +581,10 @@ sub partial_prepare ($$$) {
(?:HEADER\.FIELDS(\.NOT)?)\x20 # 2
\(([A-Z0-9\-\x20]+)\) # 3 - hdrs
\](?:<([0-9]+)(?:\.([0-9]+))?>)?\z/sx) { # 4 5
- $partial->{$att} = [ $2 ? \&partial_hdr_not
- : \&partial_hdr_get,
- $1, $3, $4, $5 ];
+ my $tmp = $partial->{$att} = [ $2 ? \&partial_hdr_not
+ : \&partial_hdr_get,
+ $1, undef, $4, $5 ];
+ $tmp->[2] = hdrs_regexp($3);
} else {
undef;
}
diff --git a/t/imap.t b/t/imap.t
index fe6352b678c..451b6596bf9 100644
--- a/t/imap.t
+++ b/t/imap.t
@@ -46,17 +46,21 @@ use PublicInbox::IMAPD;
my $partial_body = \&PublicInbox::IMAP::partial_body;
my $partial_hdr_get = \&PublicInbox::IMAP::partial_hdr_get;
my $partial_hdr_not = \&PublicInbox::IMAP::partial_hdr_not;
+ my $hdrs_regexp = \&PublicInbox::IMAP::hdrs_regexp;
is_deeply($x, {
'BODY[9]' => [ $partial_body, 9, undef, undef, undef ],
'BODY[9]<5>' => [ $partial_body, 9, undef, 5, undef ],
'BODY[9]<5.1>' => [ $partial_body, 9, undef, 5, 1 ],
'BODY[1.1]' => [ $partial_body, '1.1', undef, undef, undef ],
'BODY[HEADER.FIELDS (DATE FROM)]' => [ $partial_hdr_get,
- undef, 'DATE FROM', undef, undef ],
+ undef, $hdrs_regexp->('DATE FROM'),
+ undef, undef ],
'BODY[HEADER.FIELDS.NOT (TO)]' => [ $partial_hdr_not,
- undef, 'TO', undef, undef ],
+ undef, $hdrs_regexp->('TO'),
+ undef, undef ],
'BODY[1.1.HEADER.FIELDS (TO)]' => [ $partial_hdr_get,
- '1.1', 'TO', undef, undef ],
+ '1.1', $hdrs_regexp->('TO'),
+ undef, undef ],
}, 'structure matches expected');
}
^ permalink raw reply related [relevance 7%]
* [PATCH 00/82] public-inbox-imapd: read-only IMAP server
@ 2020-06-10 7:03 6% Eric Wong
2020-06-10 7:04 7% ` [PATCH 22/82] imap: speed up HEADER.FIELDS[.NOT] range fetches Eric Wong
0 siblings, 1 reply; 2+ results
From: Eric Wong @ 2020-06-10 7:03 UTC (permalink / raw)
To: meta
So I finally wrote my first IMAP server! And I'm actually
fairly satisfied with how it's turning out to support a bunch
of other performance + scalability work I've wanted to do.
Some previous notes here:
https://public-inbox.org/meta/20200609113442.GA16856@dcvr/
I finally seem to have gotten it to play nicely with mutt header
caching, so it's fit for public consumption :)
imaps://news.public-inbox.org/INBOX.comp.mail.public-inbox.meta.0
You can use any username+password, and AUTH=ANONYMOUS also
works if your client does that.
It doesn't support UTF-7 (mailbox names) or advertise UTF-8
in CAPABILITIES, yet; I still have RFCs to read :P
And there's a bunch of new things which could use some
testing from non-mutt/mbsync/offlineimap users.
Maybe you'll find some client-side bugs like I did :P
v1 reindexing also gets a little bit of parallelism :)
Anyways, I'll probably be porting some of the scalability
and slow-storage work to older parts of the code before
fiddling with more IMAP extensions.
Eric Wong (82):
doc: add some IMAP standards
nntpd: restrict allowed newsgroup names
preliminary imap server implementation
inboxidle: new class to detect inbox changes
imap: support IDLE
msgmap: split ->max into its own method
imap: delay InboxIdle start, support refresh
imap: implement STATUS command
imap: use Text::ParseWords::parse_line to handle quoted words
imap: support LIST command
t/imapd: support FakeInotify and KQNotify
imap: support fetch for BODYSTRUCTURE and BODY
eml: each_part: single part $idx is 1
imap: allow fetch of partial of BODY[...] and headers
imap: always include `resp-text' in responses
imap: split out unit tests and benchmarks
imap: fix multi-message partial header fetches
imap: simplify partial fetch structure
imap: support sequence number FETCH
imap: do not include ".PEEK" in responses
imap: support the CLOSE command
imap: speed up HEADER.FIELDS[.NOT] range fetches
git: async: flatten the inflight array
git: do our own read buffering for cat-file
imap: use git-cat-file asynchronously
git: idle rbuf for async
imap: support LSUB command
imap: FETCH: support comma-delimited ranges
add imapd compression test
testcommon: tcp_(server|connect): BAIL_OUT on failure
*deflate: drop invalid comment about rbuf
imap: fix pipelining with async git
git: cat_async: provide requested OID + "missing" on missing blobs
git: move async_cat reference to PublicInbox::Git
git: async: automatic retry on alternates change
imapclient: wrapper for Mail::IMAPClient
xt: add imapd-validate and imapd-mbsync-oimap
imap: support out-of-bounds ranges
xt/perf-imap-list: time refresh_inboxlist
imap: case-insensitive mailbox name comparisons
imap: break giant inboxes into sub-inboxes of 50K messages
imap: start introducing iterative config reloading
imap: require ".$UID_MIN-$UID_END" suffix
imapd: ensure LIST is sorted alphabetically, for now
imap: omit $UID_END from mailbox name, use index
t/config.t: always compare against git bool behavior
xt/*: show some tunable parameters
imap: STATUS and LIST are case-insensitive, too
imap: EXAMINE/STATUS: return correct counts
imap: avoid uninitialized warnings on incomplete commands
imap: start parsing out queries for SQLite and Xapian
imap: SEARCH: clamp results to the 50K UID range
imap: allow UID range search on timestamps
over: get_art: use dbh->prepare_cached
search: index byte size of a message for IMAP search
search: index UID for IMAP search, too
imap: remove dummies from sequence number FETCH
imap: compile UID FETCH to opcodes
imap: UID FETCH: optimize for smsg-only case
imap: UID FETCH: optimize (UID FLAGS) harder
imap: IDLE: avoid extraneous wakeups, keep-alive
imap: 30 minute auto-logout timer
imap: split ->logged_in attribute into a separate class
searchidx: v1 (re)-index uses git asynchronously
index: account for CRLF conversion when storing bytes
imap: rely on smsg->{bytes} for RFC822.SIZE
imap: UID FETCH requires at least one data item
imap: LIST shows "INBOX" in all caps
imap: support 8000 octet lines
imap: reinstate some message sequence number support
imap: cleanup ->{uid_base} usage
imap: FETCH: more granular CRLF conversion
imap: further speed up HEADER.FIELDS FETCH requests
imap: FETCH: try to make fake MSNs sequentially
imap: STATUS/EXAMINE: rely on SQLite overview
imap: UID SEARCH: support multiple ranges
imap: wire up Xapian search, msn SEARCH and multiple ranges
imap: misc cleanups and notes
imapd: don't bother sorting LIST output
imap: drop non-UID SEARCH for now
over: uid_range: remove LIMIT
imap: FETCH: proper MSN => UID mapping for requests
Documentation/public-inbox-imapd.pod | 91 ++
Documentation/standards.perl | 10 +
MANIFEST | 18 +
lib/PublicInbox/Config.pm | 18 +
lib/PublicInbox/Daemon.pm | 24 +-
lib/PublicInbox/DummyInbox.pm | 22 +
lib/PublicInbox/Eml.pm | 9 +-
lib/PublicInbox/FakeInotify.pm | 59 ++
lib/PublicInbox/Git.pm | 163 +--
lib/PublicInbox/GitAsyncCat.pm | 51 +
lib/PublicInbox/IMAP.pm | 1397 ++++++++++++++++++++++++++
lib/PublicInbox/IMAPClient.pm | 119 +++
lib/PublicInbox/IMAPD.pm | 114 +++
lib/PublicInbox/IMAPdeflate.pm | 126 +++
lib/PublicInbox/Import.pm | 2 +-
lib/PublicInbox/In2Tie.pm | 17 +
lib/PublicInbox/Inbox.pm | 33 +-
lib/PublicInbox/InboxIdle.pm | 79 ++
lib/PublicInbox/KQNotify.pm | 66 ++
lib/PublicInbox/Lock.pm | 7 +
lib/PublicInbox/MsgIter.pm | 2 +-
lib/PublicInbox/Msgmap.pm | 20 +-
lib/PublicInbox/NNTPD.pm | 12 +-
lib/PublicInbox/NNTPdeflate.pm | 1 -
lib/PublicInbox/Over.pm | 50 +-
lib/PublicInbox/Search.pm | 32 +-
lib/PublicInbox/SearchIdx.pm | 89 +-
lib/PublicInbox/SearchIdxShard.pm | 11 +-
lib/PublicInbox/Smsg.pm | 8 +-
lib/PublicInbox/TestCommon.pm | 7 +-
lib/PublicInbox/V2Writable.pm | 10 +-
script/public-inbox-imapd | 14 +
t/config.t | 15 +-
t/eml.t | 2 +-
t/git.t | 40 +-
t/imap.t | 133 +++
t/imapd-tls.t | 204 ++++
t/imapd.t | 398 ++++++++
t/import.t | 5 +-
t/inbox_idle.t | 72 ++
t/nntpd.t | 5 +-
t/over.t | 3 +
t/search.t | 19 +
xt/cmp-msgstr.t | 1 -
xt/cmp-msgview.t | 1 -
xt/eml_check_limits.t | 6 +-
xt/git_async_cmp.t | 2 +-
xt/imapd-mbsync-oimap.t | 132 +++
xt/imapd-validate.t | 177 ++++
xt/mem-msgview.t | 1 +
xt/msgtime_cmp.t | 1 -
xt/perf-msgview.t | 1 -
52 files changed, 3718 insertions(+), 181 deletions(-)
create mode 100644 Documentation/public-inbox-imapd.pod
create mode 100644 lib/PublicInbox/DummyInbox.pm
create mode 100644 lib/PublicInbox/FakeInotify.pm
create mode 100644 lib/PublicInbox/GitAsyncCat.pm
create mode 100644 lib/PublicInbox/IMAP.pm
create mode 100644 lib/PublicInbox/IMAPClient.pm
create mode 100644 lib/PublicInbox/IMAPD.pm
create mode 100644 lib/PublicInbox/IMAPdeflate.pm
create mode 100644 lib/PublicInbox/In2Tie.pm
create mode 100644 lib/PublicInbox/InboxIdle.pm
create mode 100644 lib/PublicInbox/KQNotify.pm
create mode 100644 script/public-inbox-imapd
create mode 100644 t/imap.t
create mode 100644 t/imapd-tls.t
create mode 100644 t/imapd.t
create mode 100644 t/inbox_idle.t
create mode 100644 xt/imapd-mbsync-oimap.t
create mode 100644 xt/imapd-validate.t
^ permalink raw reply [relevance 6%]
Results 1-2 of 2 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2020-06-10 7:03 6% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
2020-06-10 7:04 7% ` [PATCH 22/82] imap: speed up HEADER.FIELDS[.NOT] range fetches Eric Wong
Code repositories for project(s) associated with this public inbox
https://80x24.org/public-inbox.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).