* [PATCH 32/82] imap: fix pipelining with async git
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
@ 2020-06-10 7:04 7% ` Eric Wong
0 siblings, 0 replies; 2+ results
From: Eric Wong @ 2020-06-10 7:04 UTC (permalink / raw)
To: meta
Since IMAP yields control to GitAsyncCat, IMAP->event_step may
be invoked with {long_cb} still active. We must be sure to
bail out of IMAP->event_step if that happens and continue to let
GitAsyncCat drive IMAP.
This also improves fairness by never processing more than one
request per ->event_step.
---
lib/PublicInbox/IMAP.pm | 37 ++++++++++++++++------------------
lib/PublicInbox/IMAPdeflate.pm | 10 +++++++++
2 files changed, 27 insertions(+), 20 deletions(-)
diff --git a/lib/PublicInbox/IMAP.pm b/lib/PublicInbox/IMAP.pm
index 917833f7c47..3c32d846508 100644
--- a/lib/PublicInbox/IMAP.pm
+++ b/lib/PublicInbox/IMAP.pm
@@ -888,38 +888,35 @@ sub long_response ($$;@) {
sub event_step {
my ($self) = @_;
- return unless $self->flush_write && $self->{sock};
+ return unless $self->flush_write && $self->{sock} && !$self->{long_cb};
$self->update_idle_time;
# only read more requests if we've drained the write buffer,
# otherwise we can be buffering infinitely w/o backpressure
- my $rbuf = $self->{rbuf} // (\(my $x = ''));
- my $r = 1;
-
- if (index($$rbuf, "\n") < 0) {
- my $off = length($$rbuf);
- $r = $self->do_read($rbuf, LINE_MAX, $off) or return;
- }
- while ($r > 0 && $$rbuf =~ s/\A[ \t]*([^\n]*?)\r?\n//) {
- my $line = $1;
- return $self->close if $line =~ /[[:cntrl:]]/s;
- my $t0 = now();
- my $fd = fileno($self->{sock});
- $r = eval { process_line($self, $line) };
- my $pending = $self->{wbuf} ? ' pending' : '';
- out($self, "[$fd] %s - %0.6f$pending", $line, now() - $t0);
- }
+ my $rbuf = $self->{rbuf} // \(my $x = '');
+ my $line = index($$rbuf, "\n");
+ while ($line < 0) {
+ return $self->close if length($$rbuf) >= LINE_MAX;
+ $self->do_read($rbuf, LINE_MAX, length($$rbuf)) or return;
+ $line = index($$rbuf, "\n");
+ }
+ $line = substr($$rbuf, 0, $line + 1, '');
+ $line =~ s/\r?\n\z//s;
+ return $self->close if $line =~ /[[:cntrl:]]/s;
+ my $t0 = now();
+ my $fd = fileno($self->{sock});
+ my $r = eval { process_line($self, $line) };
+ my $pending = $self->{wbuf} ? ' pending' : '';
+ out($self, "[$fd] %s - %0.6f$pending - $r", $line, now() - $t0);
return $self->close if $r < 0;
- my $len = length($$rbuf);
- return $self->close if ($len >= LINE_MAX);
$self->rbuf_idle($rbuf);
$self->update_idle_time;
# maybe there's more pipelined data, or we'll have
# to register it for socket-readiness notifications
- $self->requeue unless $self->{wbuf};
+ $self->requeue unless $pending;
}
sub compressed { undef }
diff --git a/lib/PublicInbox/IMAPdeflate.pm b/lib/PublicInbox/IMAPdeflate.pm
index 67c9a9738d5..42daa6cffaa 100644
--- a/lib/PublicInbox/IMAPdeflate.pm
+++ b/lib/PublicInbox/IMAPdeflate.pm
@@ -59,6 +59,16 @@ sub do_read ($$$$) {
$doff = length($dbuf);
my $r = PublicInbox::DS::do_read($self, \$dbuf, $len, $doff) or return;
+ # Workaround inflate bug appending to OOK scalars:
+ # <https://rt.cpan.org/Ticket/Display.html?id=132734>
+ # We only have $off if the client is pipelining, and pipelining
+ # is where our substr() OOK optimization in event_step makes sense.
+ if ($off) {
+ my $copy = $$rbuf;
+ undef $$rbuf;
+ $$rbuf = $copy;
+ }
+
# assert(length($$rbuf) == $off) as far as NNTP.pm is concerned
# -ConsumeInput is true, so $dbuf is automatically emptied
my $err = $zin->inflate($dbuf, $rbuf);
^ permalink raw reply related [relevance 7%]
* [PATCH 00/82] public-inbox-imapd: read-only IMAP server
@ 2020-06-10 7:03 5% Eric Wong
2020-06-10 7:04 7% ` [PATCH 32/82] imap: fix pipelining with async git Eric Wong
0 siblings, 1 reply; 2+ results
From: Eric Wong @ 2020-06-10 7:03 UTC (permalink / raw)
To: meta
So I finally wrote my first IMAP server! And I'm actually
fairly satisfied with how it's turning out to support a bunch
of other performance + scalability work I've wanted to do.
Some previous notes here:
https://public-inbox.org/meta/20200609113442.GA16856@dcvr/
I finally seem to have gotten it to play nicely with mutt header
caching, so it's fit for public consumption :)
imaps://news.public-inbox.org/INBOX.comp.mail.public-inbox.meta.0
You can use any username+password, and AUTH=ANONYMOUS also
works if your client does that.
It doesn't support UTF-7 (mailbox names) or advertise UTF-8
in CAPABILITIES, yet; I still have RFCs to read :P
And there's a bunch of new things which could use some
testing from non-mutt/mbsync/offlineimap users.
Maybe you'll find some client-side bugs like I did :P
v1 reindexing also gets a little bit of parallelism :)
Anyways, I'll probably be porting some of the scalability
and slow-storage work to older parts of the code before
fiddling with more IMAP extensions.
Eric Wong (82):
doc: add some IMAP standards
nntpd: restrict allowed newsgroup names
preliminary imap server implementation
inboxidle: new class to detect inbox changes
imap: support IDLE
msgmap: split ->max into its own method
imap: delay InboxIdle start, support refresh
imap: implement STATUS command
imap: use Text::ParseWords::parse_line to handle quoted words
imap: support LIST command
t/imapd: support FakeInotify and KQNotify
imap: support fetch for BODYSTRUCTURE and BODY
eml: each_part: single part $idx is 1
imap: allow fetch of partial of BODY[...] and headers
imap: always include `resp-text' in responses
imap: split out unit tests and benchmarks
imap: fix multi-message partial header fetches
imap: simplify partial fetch structure
imap: support sequence number FETCH
imap: do not include ".PEEK" in responses
imap: support the CLOSE command
imap: speed up HEADER.FIELDS[.NOT] range fetches
git: async: flatten the inflight array
git: do our own read buffering for cat-file
imap: use git-cat-file asynchronously
git: idle rbuf for async
imap: support LSUB command
imap: FETCH: support comma-delimited ranges
add imapd compression test
testcommon: tcp_(server|connect): BAIL_OUT on failure
*deflate: drop invalid comment about rbuf
imap: fix pipelining with async git
git: cat_async: provide requested OID + "missing" on missing blobs
git: move async_cat reference to PublicInbox::Git
git: async: automatic retry on alternates change
imapclient: wrapper for Mail::IMAPClient
xt: add imapd-validate and imapd-mbsync-oimap
imap: support out-of-bounds ranges
xt/perf-imap-list: time refresh_inboxlist
imap: case-insensitive mailbox name comparisons
imap: break giant inboxes into sub-inboxes of 50K messages
imap: start introducing iterative config reloading
imap: require ".$UID_MIN-$UID_END" suffix
imapd: ensure LIST is sorted alphabetically, for now
imap: omit $UID_END from mailbox name, use index
t/config.t: always compare against git bool behavior
xt/*: show some tunable parameters
imap: STATUS and LIST are case-insensitive, too
imap: EXAMINE/STATUS: return correct counts
imap: avoid uninitialized warnings on incomplete commands
imap: start parsing out queries for SQLite and Xapian
imap: SEARCH: clamp results to the 50K UID range
imap: allow UID range search on timestamps
over: get_art: use dbh->prepare_cached
search: index byte size of a message for IMAP search
search: index UID for IMAP search, too
imap: remove dummies from sequence number FETCH
imap: compile UID FETCH to opcodes
imap: UID FETCH: optimize for smsg-only case
imap: UID FETCH: optimize (UID FLAGS) harder
imap: IDLE: avoid extraneous wakeups, keep-alive
imap: 30 minute auto-logout timer
imap: split ->logged_in attribute into a separate class
searchidx: v1 (re)-index uses git asynchronously
index: account for CRLF conversion when storing bytes
imap: rely on smsg->{bytes} for RFC822.SIZE
imap: UID FETCH requires at least one data item
imap: LIST shows "INBOX" in all caps
imap: support 8000 octet lines
imap: reinstate some message sequence number support
imap: cleanup ->{uid_base} usage
imap: FETCH: more granular CRLF conversion
imap: further speed up HEADER.FIELDS FETCH requests
imap: FETCH: try to make fake MSNs sequentially
imap: STATUS/EXAMINE: rely on SQLite overview
imap: UID SEARCH: support multiple ranges
imap: wire up Xapian search, msn SEARCH and multiple ranges
imap: misc cleanups and notes
imapd: don't bother sorting LIST output
imap: drop non-UID SEARCH for now
over: uid_range: remove LIMIT
imap: FETCH: proper MSN => UID mapping for requests
Documentation/public-inbox-imapd.pod | 91 ++
Documentation/standards.perl | 10 +
MANIFEST | 18 +
lib/PublicInbox/Config.pm | 18 +
lib/PublicInbox/Daemon.pm | 24 +-
lib/PublicInbox/DummyInbox.pm | 22 +
lib/PublicInbox/Eml.pm | 9 +-
lib/PublicInbox/FakeInotify.pm | 59 ++
lib/PublicInbox/Git.pm | 163 +--
lib/PublicInbox/GitAsyncCat.pm | 51 +
lib/PublicInbox/IMAP.pm | 1397 ++++++++++++++++++++++++++
lib/PublicInbox/IMAPClient.pm | 119 +++
lib/PublicInbox/IMAPD.pm | 114 +++
lib/PublicInbox/IMAPdeflate.pm | 126 +++
lib/PublicInbox/Import.pm | 2 +-
lib/PublicInbox/In2Tie.pm | 17 +
lib/PublicInbox/Inbox.pm | 33 +-
lib/PublicInbox/InboxIdle.pm | 79 ++
lib/PublicInbox/KQNotify.pm | 66 ++
lib/PublicInbox/Lock.pm | 7 +
lib/PublicInbox/MsgIter.pm | 2 +-
lib/PublicInbox/Msgmap.pm | 20 +-
lib/PublicInbox/NNTPD.pm | 12 +-
lib/PublicInbox/NNTPdeflate.pm | 1 -
lib/PublicInbox/Over.pm | 50 +-
lib/PublicInbox/Search.pm | 32 +-
lib/PublicInbox/SearchIdx.pm | 89 +-
lib/PublicInbox/SearchIdxShard.pm | 11 +-
lib/PublicInbox/Smsg.pm | 8 +-
lib/PublicInbox/TestCommon.pm | 7 +-
lib/PublicInbox/V2Writable.pm | 10 +-
script/public-inbox-imapd | 14 +
t/config.t | 15 +-
t/eml.t | 2 +-
t/git.t | 40 +-
t/imap.t | 133 +++
t/imapd-tls.t | 204 ++++
t/imapd.t | 398 ++++++++
t/import.t | 5 +-
t/inbox_idle.t | 72 ++
t/nntpd.t | 5 +-
t/over.t | 3 +
t/search.t | 19 +
xt/cmp-msgstr.t | 1 -
xt/cmp-msgview.t | 1 -
xt/eml_check_limits.t | 6 +-
xt/git_async_cmp.t | 2 +-
xt/imapd-mbsync-oimap.t | 132 +++
xt/imapd-validate.t | 177 ++++
xt/mem-msgview.t | 1 +
xt/msgtime_cmp.t | 1 -
xt/perf-msgview.t | 1 -
52 files changed, 3718 insertions(+), 181 deletions(-)
create mode 100644 Documentation/public-inbox-imapd.pod
create mode 100644 lib/PublicInbox/DummyInbox.pm
create mode 100644 lib/PublicInbox/FakeInotify.pm
create mode 100644 lib/PublicInbox/GitAsyncCat.pm
create mode 100644 lib/PublicInbox/IMAP.pm
create mode 100644 lib/PublicInbox/IMAPClient.pm
create mode 100644 lib/PublicInbox/IMAPD.pm
create mode 100644 lib/PublicInbox/IMAPdeflate.pm
create mode 100644 lib/PublicInbox/In2Tie.pm
create mode 100644 lib/PublicInbox/InboxIdle.pm
create mode 100644 lib/PublicInbox/KQNotify.pm
create mode 100644 script/public-inbox-imapd
create mode 100644 t/imap.t
create mode 100644 t/imapd-tls.t
create mode 100644 t/imapd.t
create mode 100644 t/inbox_idle.t
create mode 100644 xt/imapd-mbsync-oimap.t
create mode 100644 xt/imapd-validate.t
^ permalink raw reply [relevance 5%]
Results 1-2 of 2 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
2020-06-10 7:04 7% ` [PATCH 32/82] imap: fix pipelining with async git Eric Wong
Code repositories for project(s) associated with this public inbox
https://80x24.org/public-inbox.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).