* [PATCH 52/82] imap: SEARCH: clamp results to the 50K UID range
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
@ 2020-06-10 7:04 7% ` Eric Wong
0 siblings, 0 replies; 2+ results
From: Eric Wong @ 2020-06-10 7:04 UTC (permalink / raw)
To: meta
We won't support searching across mailboxes, just yet;
but maybe in the future.
---
lib/PublicInbox/IMAP.pm | 34 ++++++++++++++++------------------
1 file changed, 16 insertions(+), 18 deletions(-)
diff --git a/lib/PublicInbox/IMAP.pm b/lib/PublicInbox/IMAP.pm
index b24dfcd70b5..f9af530aa19 100644
--- a/lib/PublicInbox/IMAP.pm
+++ b/lib/PublicInbox/IMAP.pm
@@ -487,6 +487,14 @@ sub uid_fetch_cb { # called by git->cat_async via git_async_cat
requeue_once($self);
}
+sub uid_clamp ($$$) {
+ my ($self, $beg, $end) = @_;
+ my $uid_min = $self->{uid_min} or return;
+ my $uid_end = $uid_min + UID_BLOCK - 1;
+ $$beg = $uid_min if $$beg < $uid_min;
+ $$end = $uid_end if $$end > $uid_end;
+}
+
sub range_step ($$) {
my ($self, $range_csv) = @_;
my ($beg, $end, $range);
@@ -501,6 +509,8 @@ sub range_step ($$) {
} elsif ($range =~ /\A([0-9]+):\*\z/) {
$beg = $1 + 0;
$end = $self->{ibx}->mm->max // 0;
+ my $uid_end = ($self->{uid_min} // 1) - 1 + UID_BLOCK;
+ $end = $uid_end if $end > $uid_end;
$beg = $end if $beg > $end;
} elsif ($range =~ /\A[0-9]+\z/) {
$beg = $end = $range + 0;
@@ -508,11 +518,7 @@ sub range_step ($$) {
} else {
return 'BAD fetch range';
}
- if (defined($range) && (my $uid_min = $self->{uid_min})) {
- my $uid_end = $uid_min + UID_BLOCK - 1;
- $beg = $uid_min if $beg < $uid_min;
- $end = $uid_end if $end > $uid_end;
- }
+ uid_clamp($self, \$beg, \$end) if defined($range);
[ $beg, $end, $$range_csv ];
}
@@ -804,17 +810,6 @@ sub parse_date ($) { # 02-Oct-1993
timegm(0, 0, 0, $dd, $mm, $yyyy);
}
-sub uid_search_all { # long_response
- my ($self, $tag, $num) = @_;
- my $uids = $self->{ibx}->mm->ids_after($num);
- if (scalar(@$uids)) {
- $self->msg_more(join(' ', '', @$uids));
- } else {
- $self->write(\"\r\n$tag OK Search done\r\n");
- undef;
- }
-}
-
sub uid_search_uid_range { # long_response
my ($self, $tag, $beg, $end) = @_;
my $uids = $self->{ibx}->mm->msg_range($beg, $end, 'num');
@@ -944,12 +939,15 @@ sub cmd_uid_search ($$$;) {
if (!scalar(keys %$q)) {
$self->msg_more('* SEARCH');
- my $num = 0;
- long_response($self, \&uid_search_all, $tag, \$num);
+ my $beg = $self->{uid_min} // 1;
+ my $end = $ibx->mm->max;
+ uid_clamp($self, \$beg, \$end);
+ long_response($self, \&uid_search_uid_range, $tag, \$beg, $end);
} elsif (my $uid = $q->{uid}) {
if ($uid =~ /\A([0-9]+):([0-9]+|\*)\z/s) {
my ($beg, $end) = ($1, $2);
$end = $ibx->mm->max if $end eq '*';
+ uid_clamp($self, \$beg, \$end);
$self->msg_more('* SEARCH');
long_response($self, \&uid_search_uid_range,
$tag, \$beg, $end);
^ permalink raw reply related [relevance 7%]
* [PATCH 00/82] public-inbox-imapd: read-only IMAP server
@ 2020-06-10 7:03 5% Eric Wong
2020-06-10 7:04 7% ` [PATCH 52/82] imap: SEARCH: clamp results to the 50K UID range Eric Wong
0 siblings, 1 reply; 2+ results
From: Eric Wong @ 2020-06-10 7:03 UTC (permalink / raw)
To: meta
So I finally wrote my first IMAP server! And I'm actually
fairly satisfied with how it's turning out to support a bunch
of other performance + scalability work I've wanted to do.
Some previous notes here:
https://public-inbox.org/meta/20200609113442.GA16856@dcvr/
I finally seem to have gotten it to play nicely with mutt header
caching, so it's fit for public consumption :)
imaps://news.public-inbox.org/INBOX.comp.mail.public-inbox.meta.0
You can use any username+password, and AUTH=ANONYMOUS also
works if your client does that.
It doesn't support UTF-7 (mailbox names) or advertise UTF-8
in CAPABILITIES, yet; I still have RFCs to read :P
And there's a bunch of new things which could use some
testing from non-mutt/mbsync/offlineimap users.
Maybe you'll find some client-side bugs like I did :P
v1 reindexing also gets a little bit of parallelism :)
Anyways, I'll probably be porting some of the scalability
and slow-storage work to older parts of the code before
fiddling with more IMAP extensions.
Eric Wong (82):
doc: add some IMAP standards
nntpd: restrict allowed newsgroup names
preliminary imap server implementation
inboxidle: new class to detect inbox changes
imap: support IDLE
msgmap: split ->max into its own method
imap: delay InboxIdle start, support refresh
imap: implement STATUS command
imap: use Text::ParseWords::parse_line to handle quoted words
imap: support LIST command
t/imapd: support FakeInotify and KQNotify
imap: support fetch for BODYSTRUCTURE and BODY
eml: each_part: single part $idx is 1
imap: allow fetch of partial of BODY[...] and headers
imap: always include `resp-text' in responses
imap: split out unit tests and benchmarks
imap: fix multi-message partial header fetches
imap: simplify partial fetch structure
imap: support sequence number FETCH
imap: do not include ".PEEK" in responses
imap: support the CLOSE command
imap: speed up HEADER.FIELDS[.NOT] range fetches
git: async: flatten the inflight array
git: do our own read buffering for cat-file
imap: use git-cat-file asynchronously
git: idle rbuf for async
imap: support LSUB command
imap: FETCH: support comma-delimited ranges
add imapd compression test
testcommon: tcp_(server|connect): BAIL_OUT on failure
*deflate: drop invalid comment about rbuf
imap: fix pipelining with async git
git: cat_async: provide requested OID + "missing" on missing blobs
git: move async_cat reference to PublicInbox::Git
git: async: automatic retry on alternates change
imapclient: wrapper for Mail::IMAPClient
xt: add imapd-validate and imapd-mbsync-oimap
imap: support out-of-bounds ranges
xt/perf-imap-list: time refresh_inboxlist
imap: case-insensitive mailbox name comparisons
imap: break giant inboxes into sub-inboxes of 50K messages
imap: start introducing iterative config reloading
imap: require ".$UID_MIN-$UID_END" suffix
imapd: ensure LIST is sorted alphabetically, for now
imap: omit $UID_END from mailbox name, use index
t/config.t: always compare against git bool behavior
xt/*: show some tunable parameters
imap: STATUS and LIST are case-insensitive, too
imap: EXAMINE/STATUS: return correct counts
imap: avoid uninitialized warnings on incomplete commands
imap: start parsing out queries for SQLite and Xapian
imap: SEARCH: clamp results to the 50K UID range
imap: allow UID range search on timestamps
over: get_art: use dbh->prepare_cached
search: index byte size of a message for IMAP search
search: index UID for IMAP search, too
imap: remove dummies from sequence number FETCH
imap: compile UID FETCH to opcodes
imap: UID FETCH: optimize for smsg-only case
imap: UID FETCH: optimize (UID FLAGS) harder
imap: IDLE: avoid extraneous wakeups, keep-alive
imap: 30 minute auto-logout timer
imap: split ->logged_in attribute into a separate class
searchidx: v1 (re)-index uses git asynchronously
index: account for CRLF conversion when storing bytes
imap: rely on smsg->{bytes} for RFC822.SIZE
imap: UID FETCH requires at least one data item
imap: LIST shows "INBOX" in all caps
imap: support 8000 octet lines
imap: reinstate some message sequence number support
imap: cleanup ->{uid_base} usage
imap: FETCH: more granular CRLF conversion
imap: further speed up HEADER.FIELDS FETCH requests
imap: FETCH: try to make fake MSNs sequentially
imap: STATUS/EXAMINE: rely on SQLite overview
imap: UID SEARCH: support multiple ranges
imap: wire up Xapian search, msn SEARCH and multiple ranges
imap: misc cleanups and notes
imapd: don't bother sorting LIST output
imap: drop non-UID SEARCH for now
over: uid_range: remove LIMIT
imap: FETCH: proper MSN => UID mapping for requests
Documentation/public-inbox-imapd.pod | 91 ++
Documentation/standards.perl | 10 +
MANIFEST | 18 +
lib/PublicInbox/Config.pm | 18 +
lib/PublicInbox/Daemon.pm | 24 +-
lib/PublicInbox/DummyInbox.pm | 22 +
lib/PublicInbox/Eml.pm | 9 +-
lib/PublicInbox/FakeInotify.pm | 59 ++
lib/PublicInbox/Git.pm | 163 +--
lib/PublicInbox/GitAsyncCat.pm | 51 +
lib/PublicInbox/IMAP.pm | 1397 ++++++++++++++++++++++++++
lib/PublicInbox/IMAPClient.pm | 119 +++
lib/PublicInbox/IMAPD.pm | 114 +++
lib/PublicInbox/IMAPdeflate.pm | 126 +++
lib/PublicInbox/Import.pm | 2 +-
lib/PublicInbox/In2Tie.pm | 17 +
lib/PublicInbox/Inbox.pm | 33 +-
lib/PublicInbox/InboxIdle.pm | 79 ++
lib/PublicInbox/KQNotify.pm | 66 ++
lib/PublicInbox/Lock.pm | 7 +
lib/PublicInbox/MsgIter.pm | 2 +-
lib/PublicInbox/Msgmap.pm | 20 +-
lib/PublicInbox/NNTPD.pm | 12 +-
lib/PublicInbox/NNTPdeflate.pm | 1 -
lib/PublicInbox/Over.pm | 50 +-
lib/PublicInbox/Search.pm | 32 +-
lib/PublicInbox/SearchIdx.pm | 89 +-
lib/PublicInbox/SearchIdxShard.pm | 11 +-
lib/PublicInbox/Smsg.pm | 8 +-
lib/PublicInbox/TestCommon.pm | 7 +-
lib/PublicInbox/V2Writable.pm | 10 +-
script/public-inbox-imapd | 14 +
t/config.t | 15 +-
t/eml.t | 2 +-
t/git.t | 40 +-
t/imap.t | 133 +++
t/imapd-tls.t | 204 ++++
t/imapd.t | 398 ++++++++
t/import.t | 5 +-
t/inbox_idle.t | 72 ++
t/nntpd.t | 5 +-
t/over.t | 3 +
t/search.t | 19 +
xt/cmp-msgstr.t | 1 -
xt/cmp-msgview.t | 1 -
xt/eml_check_limits.t | 6 +-
xt/git_async_cmp.t | 2 +-
xt/imapd-mbsync-oimap.t | 132 +++
xt/imapd-validate.t | 177 ++++
xt/mem-msgview.t | 1 +
xt/msgtime_cmp.t | 1 -
xt/perf-msgview.t | 1 -
52 files changed, 3718 insertions(+), 181 deletions(-)
create mode 100644 Documentation/public-inbox-imapd.pod
create mode 100644 lib/PublicInbox/DummyInbox.pm
create mode 100644 lib/PublicInbox/FakeInotify.pm
create mode 100644 lib/PublicInbox/GitAsyncCat.pm
create mode 100644 lib/PublicInbox/IMAP.pm
create mode 100644 lib/PublicInbox/IMAPClient.pm
create mode 100644 lib/PublicInbox/IMAPD.pm
create mode 100644 lib/PublicInbox/IMAPdeflate.pm
create mode 100644 lib/PublicInbox/In2Tie.pm
create mode 100644 lib/PublicInbox/InboxIdle.pm
create mode 100644 lib/PublicInbox/KQNotify.pm
create mode 100644 script/public-inbox-imapd
create mode 100644 t/imap.t
create mode 100644 t/imapd-tls.t
create mode 100644 t/imapd.t
create mode 100644 t/inbox_idle.t
create mode 100644 xt/imapd-mbsync-oimap.t
create mode 100644 xt/imapd-validate.t
^ permalink raw reply [relevance 5%]
Results 1-2 of 2 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
2020-06-10 7:04 7% ` [PATCH 52/82] imap: SEARCH: clamp results to the 50K UID range Eric Wong
Code repositories for project(s) associated with this public inbox
https://80x24.org/public-inbox.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).