* [PATCH 74/82] imap: FETCH: try to make fake MSNs sequentially
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
@ 2020-06-10 7:05 7% ` Eric Wong
0 siblings, 0 replies; 2+ results
From: Eric Wong @ 2020-06-10 7:05 UTC (permalink / raw)
To: meta
This appears to significantly improve header caching behavior
with mutt. With the current public-inbox.org/git mirror(*),
mutt will only re-FETCH the last ~300 or so messages in the
final "inbox.comp.version-control.git.7" mailbox, instead of
~49,000 messages every time.
It's not perfect, but a 500ms query is better than a >10s query
and mutt itself spends as much time loading its header cache.
(*) there are many gaps in NNTP article numbers (UIDs) due to
spam removal from public-inbox-learn.
---
lib/PublicInbox/IMAP.pm | 22 +++++++++++-----------
t/imapd.t | 4 ++--
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/lib/PublicInbox/IMAP.pm b/lib/PublicInbox/IMAP.pm
index fe3c7d1a85b..d0683530988 100644
--- a/lib/PublicInbox/IMAP.pm
+++ b/lib/PublicInbox/IMAP.pm
@@ -475,12 +475,12 @@ sub requeue_once ($) {
$self->requeue if $new_size == 1;
}
-# my ($uid_base, $UID) = @_;
-sub fetch_msn_uid ($$) { '* '.($_[1] - $_[0]).' FETCH (UID '.$_[1] }
+# my ($msn, $UID) = @_;
+sub fetch_msn_uid ($$) { '* '.(${$_[0]}++).' FETCH (UID '.$_[1] }
sub fetch_run_ops {
- my ($self, $uid_base, $smsg, $bref, $ops, $partial) = @_;
- $self->msg_more(fetch_msn_uid($uid_base, $smsg->{num}));
+ my ($self, $msn, $smsg, $bref, $ops, $partial) = @_;
+ $self->msg_more(fetch_msn_uid($msn, $smsg->{num}));
my ($eml, $k);
for (my $i = 0; $i < @$ops;) {
$k = $ops->[$i++];
@@ -492,7 +492,7 @@ sub fetch_run_ops {
sub fetch_blob_cb { # called by git->cat_async via git_async_cat
my ($bref, $oid, $type, $size, $fetch_arg) = @_;
- my ($self, undef, $msgs, undef, $ops, $partial) = @$fetch_arg;
+ my ($self, undef, $msgs, $range_info, $ops, $partial) = @$fetch_arg;
my $smsg = shift @$msgs or die 'BUG: no smsg';
if (!defined($oid)) {
# it's possible to have TOCTOU if an admin runs
@@ -501,7 +501,7 @@ sub fetch_blob_cb { # called by git->cat_async via git_async_cat
} else {
$smsg->{blob} eq $oid or die "BUG: $smsg->{blob} != $oid";
}
- fetch_run_ops($self, $self->{uid_base}, $smsg, $bref, $ops, $partial);
+ fetch_run_ops($self, $range_info->[3], $smsg, $bref, $ops, $partial);
requeue_once($self);
}
@@ -601,7 +601,8 @@ sub range_step ($$) {
return 'BAD fetch range';
}
uid_clamp($self, \$beg, \$end) if defined($range);
- [ $beg, $end, $$range_csv ];
+ my $msn = $beg - $self->{uid_base};
+ [ $beg, $end, $$range_csv, \$msn ];
}
sub refill_range ($$$) {
@@ -638,8 +639,7 @@ sub fetch_smsg { # long_response
return;
}
}
- my $uid_base = $self->{uid_base};
- fetch_run_ops($self, $uid_base, $_, undef, $ops) for @$msgs;
+ fetch_run_ops($self, $range_info->[3], $_, undef, $ops) for @$msgs;
@$msgs = ();
1; # more
}
@@ -665,10 +665,10 @@ sub fetch_uid { # long_response
}
# continue looping
}
- my $uid_base = $self->{uid_base};
my ($i, $k);
+ my $msn = $range_info->[3];
for (@$uids) {
- $self->msg_more(fetch_msn_uid($uid_base, $_));
+ $self->msg_more(fetch_msn_uid($msn, $_));
for ($i = 0; $i < @$ops;) {
$k = $ops->[$i++];
$ops->[$i++]->($self, $k);
diff --git a/t/imapd.t b/t/imapd.t
index c691e1a96a7..fdab074a249 100644
--- a/t/imapd.t
+++ b/t/imapd.t
@@ -349,8 +349,8 @@ is(scalar keys %$ret, 3, 'got all 3 messages');
}
my $r2 = $mic->fetch_hash('1:*', 'BODY.PEEK[]') or BAIL_OUT "FETCH $@";
is(scalar keys %$r2, 2, 'did not get all 3 messages');
-is($r2->{2}->{'BODY[]'}, $ret->{2}->{RFC822}, 'message 2 unchanged');
-is($r2->{3}->{'BODY[]'}, $ret->{3}->{RFC822}, 'message 3 unchanged');
+is($r2->{1}->{'BODY[]'}, $ret->{2}->{RFC822}, 'message 2 unchanged');
+is($r2->{2}->{'BODY[]'}, $ret->{3}->{RFC822}, 'message 3 unchanged');
$r2 = $mic->fetch_hash(2, 'BODY.PEEK[HEADER.FIELDS (message-id)]')
or BAIL_OUT "FETCH $@";
is($r2->{2}->{'BODY[HEADER.FIELDS (MESSAGE-ID)]'},
^ permalink raw reply related [relevance 7%]
* [PATCH 00/82] public-inbox-imapd: read-only IMAP server
@ 2020-06-10 7:03 5% Eric Wong
2020-06-10 7:05 7% ` [PATCH 74/82] imap: FETCH: try to make fake MSNs sequentially Eric Wong
0 siblings, 1 reply; 2+ results
From: Eric Wong @ 2020-06-10 7:03 UTC (permalink / raw)
To: meta
So I finally wrote my first IMAP server! And I'm actually
fairly satisfied with how it's turning out to support a bunch
of other performance + scalability work I've wanted to do.
Some previous notes here:
https://public-inbox.org/meta/20200609113442.GA16856@dcvr/
I finally seem to have gotten it to play nicely with mutt header
caching, so it's fit for public consumption :)
imaps://news.public-inbox.org/INBOX.comp.mail.public-inbox.meta.0
You can use any username+password, and AUTH=ANONYMOUS also
works if your client does that.
It doesn't support UTF-7 (mailbox names) or advertise UTF-8
in CAPABILITIES, yet; I still have RFCs to read :P
And there's a bunch of new things which could use some
testing from non-mutt/mbsync/offlineimap users.
Maybe you'll find some client-side bugs like I did :P
v1 reindexing also gets a little bit of parallelism :)
Anyways, I'll probably be porting some of the scalability
and slow-storage work to older parts of the code before
fiddling with more IMAP extensions.
Eric Wong (82):
doc: add some IMAP standards
nntpd: restrict allowed newsgroup names
preliminary imap server implementation
inboxidle: new class to detect inbox changes
imap: support IDLE
msgmap: split ->max into its own method
imap: delay InboxIdle start, support refresh
imap: implement STATUS command
imap: use Text::ParseWords::parse_line to handle quoted words
imap: support LIST command
t/imapd: support FakeInotify and KQNotify
imap: support fetch for BODYSTRUCTURE and BODY
eml: each_part: single part $idx is 1
imap: allow fetch of partial of BODY[...] and headers
imap: always include `resp-text' in responses
imap: split out unit tests and benchmarks
imap: fix multi-message partial header fetches
imap: simplify partial fetch structure
imap: support sequence number FETCH
imap: do not include ".PEEK" in responses
imap: support the CLOSE command
imap: speed up HEADER.FIELDS[.NOT] range fetches
git: async: flatten the inflight array
git: do our own read buffering for cat-file
imap: use git-cat-file asynchronously
git: idle rbuf for async
imap: support LSUB command
imap: FETCH: support comma-delimited ranges
add imapd compression test
testcommon: tcp_(server|connect): BAIL_OUT on failure
*deflate: drop invalid comment about rbuf
imap: fix pipelining with async git
git: cat_async: provide requested OID + "missing" on missing blobs
git: move async_cat reference to PublicInbox::Git
git: async: automatic retry on alternates change
imapclient: wrapper for Mail::IMAPClient
xt: add imapd-validate and imapd-mbsync-oimap
imap: support out-of-bounds ranges
xt/perf-imap-list: time refresh_inboxlist
imap: case-insensitive mailbox name comparisons
imap: break giant inboxes into sub-inboxes of 50K messages
imap: start introducing iterative config reloading
imap: require ".$UID_MIN-$UID_END" suffix
imapd: ensure LIST is sorted alphabetically, for now
imap: omit $UID_END from mailbox name, use index
t/config.t: always compare against git bool behavior
xt/*: show some tunable parameters
imap: STATUS and LIST are case-insensitive, too
imap: EXAMINE/STATUS: return correct counts
imap: avoid uninitialized warnings on incomplete commands
imap: start parsing out queries for SQLite and Xapian
imap: SEARCH: clamp results to the 50K UID range
imap: allow UID range search on timestamps
over: get_art: use dbh->prepare_cached
search: index byte size of a message for IMAP search
search: index UID for IMAP search, too
imap: remove dummies from sequence number FETCH
imap: compile UID FETCH to opcodes
imap: UID FETCH: optimize for smsg-only case
imap: UID FETCH: optimize (UID FLAGS) harder
imap: IDLE: avoid extraneous wakeups, keep-alive
imap: 30 minute auto-logout timer
imap: split ->logged_in attribute into a separate class
searchidx: v1 (re)-index uses git asynchronously
index: account for CRLF conversion when storing bytes
imap: rely on smsg->{bytes} for RFC822.SIZE
imap: UID FETCH requires at least one data item
imap: LIST shows "INBOX" in all caps
imap: support 8000 octet lines
imap: reinstate some message sequence number support
imap: cleanup ->{uid_base} usage
imap: FETCH: more granular CRLF conversion
imap: further speed up HEADER.FIELDS FETCH requests
imap: FETCH: try to make fake MSNs sequentially
imap: STATUS/EXAMINE: rely on SQLite overview
imap: UID SEARCH: support multiple ranges
imap: wire up Xapian search, msn SEARCH and multiple ranges
imap: misc cleanups and notes
imapd: don't bother sorting LIST output
imap: drop non-UID SEARCH for now
over: uid_range: remove LIMIT
imap: FETCH: proper MSN => UID mapping for requests
Documentation/public-inbox-imapd.pod | 91 ++
Documentation/standards.perl | 10 +
MANIFEST | 18 +
lib/PublicInbox/Config.pm | 18 +
lib/PublicInbox/Daemon.pm | 24 +-
lib/PublicInbox/DummyInbox.pm | 22 +
lib/PublicInbox/Eml.pm | 9 +-
lib/PublicInbox/FakeInotify.pm | 59 ++
lib/PublicInbox/Git.pm | 163 +--
lib/PublicInbox/GitAsyncCat.pm | 51 +
lib/PublicInbox/IMAP.pm | 1397 ++++++++++++++++++++++++++
lib/PublicInbox/IMAPClient.pm | 119 +++
lib/PublicInbox/IMAPD.pm | 114 +++
lib/PublicInbox/IMAPdeflate.pm | 126 +++
lib/PublicInbox/Import.pm | 2 +-
lib/PublicInbox/In2Tie.pm | 17 +
lib/PublicInbox/Inbox.pm | 33 +-
lib/PublicInbox/InboxIdle.pm | 79 ++
lib/PublicInbox/KQNotify.pm | 66 ++
lib/PublicInbox/Lock.pm | 7 +
lib/PublicInbox/MsgIter.pm | 2 +-
lib/PublicInbox/Msgmap.pm | 20 +-
lib/PublicInbox/NNTPD.pm | 12 +-
lib/PublicInbox/NNTPdeflate.pm | 1 -
lib/PublicInbox/Over.pm | 50 +-
lib/PublicInbox/Search.pm | 32 +-
lib/PublicInbox/SearchIdx.pm | 89 +-
lib/PublicInbox/SearchIdxShard.pm | 11 +-
lib/PublicInbox/Smsg.pm | 8 +-
lib/PublicInbox/TestCommon.pm | 7 +-
lib/PublicInbox/V2Writable.pm | 10 +-
script/public-inbox-imapd | 14 +
t/config.t | 15 +-
t/eml.t | 2 +-
t/git.t | 40 +-
t/imap.t | 133 +++
t/imapd-tls.t | 204 ++++
t/imapd.t | 398 ++++++++
t/import.t | 5 +-
t/inbox_idle.t | 72 ++
t/nntpd.t | 5 +-
t/over.t | 3 +
t/search.t | 19 +
xt/cmp-msgstr.t | 1 -
xt/cmp-msgview.t | 1 -
xt/eml_check_limits.t | 6 +-
xt/git_async_cmp.t | 2 +-
xt/imapd-mbsync-oimap.t | 132 +++
xt/imapd-validate.t | 177 ++++
xt/mem-msgview.t | 1 +
xt/msgtime_cmp.t | 1 -
xt/perf-msgview.t | 1 -
52 files changed, 3718 insertions(+), 181 deletions(-)
create mode 100644 Documentation/public-inbox-imapd.pod
create mode 100644 lib/PublicInbox/DummyInbox.pm
create mode 100644 lib/PublicInbox/FakeInotify.pm
create mode 100644 lib/PublicInbox/GitAsyncCat.pm
create mode 100644 lib/PublicInbox/IMAP.pm
create mode 100644 lib/PublicInbox/IMAPClient.pm
create mode 100644 lib/PublicInbox/IMAPD.pm
create mode 100644 lib/PublicInbox/IMAPdeflate.pm
create mode 100644 lib/PublicInbox/In2Tie.pm
create mode 100644 lib/PublicInbox/InboxIdle.pm
create mode 100644 lib/PublicInbox/KQNotify.pm
create mode 100644 script/public-inbox-imapd
create mode 100644 t/imap.t
create mode 100644 t/imapd-tls.t
create mode 100644 t/imapd.t
create mode 100644 t/inbox_idle.t
create mode 100644 xt/imapd-mbsync-oimap.t
create mode 100644 xt/imapd-validate.t
^ permalink raw reply [relevance 5%]
Results 1-2 of 2 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2020-06-10 7:03 5% [PATCH 00/82] public-inbox-imapd: read-only IMAP server Eric Wong
2020-06-10 7:05 7% ` [PATCH 74/82] imap: FETCH: try to make fake MSNs sequentially Eric Wong
Code repositories for project(s) associated with this public inbox
https://80x24.org/public-inbox.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).