* [PATCH 10/34] watch: remove Filesys::Notify::Simple dependency
2020-06-27 10:03 7% [PATCH 00/34] watch: add IMAP and NNTP support Eric Wong
@ 2020-06-27 10:03 3% ` Eric Wong
0 siblings, 0 replies; 2+ results
From: Eric Wong @ 2020-06-27 10:03 UTC (permalink / raw)
To: meta
Since we already use inotify and EVFILT_VNODE (kqueue)
in -imapd, we might as well use them directly in -watch,
too.
This will allow public-inbox-watch to use PublicInbox::DS
for timers to watch newsgroups/mailboxes and have saner
signal handling in future commits.
---
Documentation/public-inbox-watch.pod | 3 +-
INSTALL | 8 ---
MANIFEST | 2 +
Makefile.PL | 4 --
ci/deps.perl | 1 -
lib/PublicInbox/DirIdle.pm | 50 ++++++++++++++++
lib/PublicInbox/In2Tie.pm | 13 +++++
lib/PublicInbox/InboxIdle.pm | 11 +---
lib/PublicInbox/TestCommon.pm | 6 +-
lib/PublicInbox/WatchMaildir.pm | 39 +++++++------
script/public-inbox-watch | 3 +-
t/dir_idle.t | 6 ++
t/imapd.t | 6 +-
t/watch_filter_rubylang.t | 2 +-
t/watch_maildir.t | 85 +++++++++++++++++++++++++---
t/watch_maildir_v2.t | 2 +-
| 2 +-
17 files changed, 182 insertions(+), 61 deletions(-)
create mode 100644 lib/PublicInbox/DirIdle.pm
create mode 100644 t/dir_idle.t
diff --git a/Documentation/public-inbox-watch.pod b/Documentation/public-inbox-watch.pod
index 8a3ef076a51..bf3c9bd4bb9 100644
--- a/Documentation/public-inbox-watch.pod
+++ b/Documentation/public-inbox-watch.pod
@@ -48,8 +48,7 @@ of large Maildirs.
Upon startup, it scans the mailbox for new messages to be
imported while it was not running.
-Currently, only Maildirs are supported and the
-L<Filesys::Notify::Simple> Perl module is required.
+Currently, only Maildirs are supported.
For now, IMAP users should use tools such as L<mbsync(1)>
or L<offlineimap(1)> to bidirectionally sync their IMAP
diff --git a/INSTALL b/INSTALL
index 80cee7535f8..05e0f95e914 100644
--- a/INSTALL
+++ b/INSTALL
@@ -132,18 +132,10 @@ above, so there is no need to explicitly install them:
(optional for stale FD cleanup in daemons,
typically installed alongside Perl5)
-- Filesys::Notify::Simple deb: libfilesys-notify-simple-perl
- pkg: p5-Filesys-Notify-Simple
- rpm: perl-Filesys-Notify-Simple
- (for public-inbox-watch, pulled in by Plack)
-
- Linux::Inotify2 deb: liblinux-inotify2-perl
rpm: perl-Linux-Inotify2
(for public-inbox-watch on Linux)
-- Filesys::Notify::KQueue pkg: p5-Filesys-Notify-KQueue
- (for public-inbox-watch on FreeBSD)
-
- IO::Compress (::Gzip) deb: perl-modules (or libio-compress-perl)
pkg: perl5
rpm: perl-IO-Compress
diff --git a/MANIFEST b/MANIFEST
index 9d1a4e4a8b1..035c45bf498 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -106,6 +106,7 @@ lib/PublicInbox/DS.pm
lib/PublicInbox/DSKQXS.pm
lib/PublicInbox/DSPoll.pm
lib/PublicInbox/Daemon.pm
+lib/PublicInbox/DirIdle.pm
lib/PublicInbox/DummyInbox.pm
lib/PublicInbox/Emergency.pm
lib/PublicInbox/Eml.pm
@@ -243,6 +244,7 @@ t/content_hash.t
t/convert-compact.t
t/data/0001.patch
t/data/message_embed.eml
+t/dir_idle.t
t/ds-kqxs.t
t/ds-leak.t
t/ds-poll.t
diff --git a/Makefile.PL b/Makefile.PL
index 472baa9b080..8d90ad46cf6 100644
--- a/Makefile.PL
+++ b/Makefile.PL
@@ -138,10 +138,6 @@ WriteMakefile(
# Plack is needed for public-inbox-httpd and PublicInbox::WWW
# 'Plack' => 0,
- # Filesys::Notify::Simple is pulled in by Plack, but also
- # needed by public-inbox-watch (for now)
- # 'Filesys::Notify::Simple' => 0,
-
# TODO: this should really be made optional...
'URI::Escape' => 0,
diff --git a/ci/deps.perl b/ci/deps.perl
index 48aaa9e46d4..501f51129e7 100755
--- a/ci/deps.perl
+++ b/ci/deps.perl
@@ -32,7 +32,6 @@ my $profiles = {
BSD::Resource
DBD::SQLite
DBI
- Filesys::Notify::Simple
Inline::C
Net::Server
Plack
diff --git a/lib/PublicInbox/DirIdle.pm b/lib/PublicInbox/DirIdle.pm
new file mode 100644
index 00000000000..ffceda66530
--- /dev/null
+++ b/lib/PublicInbox/DirIdle.pm
@@ -0,0 +1,50 @@
+# Copyright (C) 2020 all contributors <meta@public-inbox.org>
+# License: AGPL-3.0+ <https://www.gnu.org/licenses/agpl-3.0.txt>
+
+# Used by public-inbox-watch for Maildir (and possibly MH in the future)
+package PublicInbox::DirIdle;
+use strict;
+use base 'PublicInbox::DS';
+use fields qw(inot);
+use PublicInbox::Syscall qw(EPOLLIN EPOLLET);
+use PublicInbox::In2Tie;
+
+my ($MAIL_IN, $ino_cls);
+if ($^O eq 'linux' && eval { require Linux::Inotify2; 1 }) {
+ $MAIL_IN = Linux::Inotify2::IN_MOVED_TO() |
+ Linux::Inotify2::IN_CREATE();
+ $ino_cls = 'Linux::Inotify2';
+} elsif (eval { require PublicInbox::KQNotify }) {
+ $MAIL_IN = PublicInbox::KQNotify::MOVED_TO_OR_CREATE();
+ $ino_cls = 'PublicInbox::KQNotify';
+} else {
+ require PublicInbox::FakeInotify;
+ $MAIL_IN = PublicInbox::FakeInotify::MOVED_TO_OR_CREATE();
+}
+
+sub new {
+ my ($class, $dirs, $cb) = @_;
+ my $self = fields::new($class);
+ my $inot;
+ if ($ino_cls) {
+ $inot = $ino_cls->new or die "E: $ino_cls->new: $!";
+ my $io = PublicInbox::In2Tie::io($inot);
+ $self->SUPER::new($io, EPOLLIN | EPOLLET);
+ } else {
+ require PublicInbox::FakeInotify;
+ $inot = PublicInbox::FakeInotify->new; # starts timer
+ }
+
+ # Linux::Inotify2->watch or similar
+ $inot->watch($_, $MAIL_IN, $cb) for @$dirs;
+ $self->{inot} = $inot;
+ $self;
+}
+
+sub event_step {
+ my ($self) = @_;
+ eval { $self->{inot}->poll }; # Linux::Inotify2::poll
+ warn "$self->{inot}->poll err: $@\n" if $@;
+}
+
+1;
diff --git a/lib/PublicInbox/In2Tie.pm b/lib/PublicInbox/In2Tie.pm
index db1dc1045c1..7dee362724e 100644
--- a/lib/PublicInbox/In2Tie.pm
+++ b/lib/PublicInbox/In2Tie.pm
@@ -5,6 +5,19 @@
# on Linux::Inotify2 objects
package PublicInbox::In2Tie;
use strict;
+use Symbol qw(gensym);
+
+sub io {
+ my $in2 = $_[0];
+ $in2->blocking(0);
+ if ($in2->can('on_overflow')) {
+ # broadcasts everything on overflow
+ $in2->on_overflow(undef);
+ }
+ my $io = gensym;
+ tie *$io, __PACKAGE__, $in2;
+ $io;
+}
sub TIEHANDLE {
my ($class, $in2) = @_;
diff --git a/lib/PublicInbox/InboxIdle.pm b/lib/PublicInbox/InboxIdle.pm
index 97e9d53250e..ba8200aef05 100644
--- a/lib/PublicInbox/InboxIdle.pm
+++ b/lib/PublicInbox/InboxIdle.pm
@@ -6,7 +6,6 @@ use strict;
use base qw(PublicInbox::DS);
use fields qw(pi_config inot pathmap);
use Cwd qw(abs_path);
-use Symbol qw(gensym);
use PublicInbox::Syscall qw(EPOLLIN EPOLLET);
my $IN_MODIFY = 0x02; # match Linux inotify
my $ino_cls;
@@ -55,14 +54,8 @@ sub new {
my $inot;
if ($ino_cls) {
$inot = $ino_cls->new or die "E: $ino_cls->new: $!";
- my $sock = gensym;
- tie *$sock, 'PublicInbox::In2Tie', $inot;
- $inot->blocking(0);
- if ($inot->can('on_overflow')) {
- # broadcasts everything on overflow
- $inot->on_overflow(undef);
- }
- $self->SUPER::new($sock, EPOLLIN | EPOLLET);
+ my $io = PublicInbox::In2Tie::io($inot);
+ $self->SUPER::new($io, EPOLLIN | EPOLLET);
} else {
require PublicInbox::FakeInotify;
$inot = PublicInbox::FakeInotify->new;
diff --git a/lib/PublicInbox/TestCommon.pm b/lib/PublicInbox/TestCommon.pm
index dc360135569..b252810fca5 100644
--- a/lib/PublicInbox/TestCommon.pm
+++ b/lib/PublicInbox/TestCommon.pm
@@ -10,7 +10,7 @@ use Fcntl qw(FD_CLOEXEC F_SETFD F_GETFD :seek);
use POSIX qw(dup2);
use IO::Socket::INET;
our @EXPORT = qw(tmpdir tcp_server tcp_connect require_git require_mods
- run_script start_script key2sub xsys xqx eml_load);
+ run_script start_script key2sub xsys xqx eml_load tick);
sub eml_load ($) {
my ($path, $cb) = @_;
@@ -418,4 +418,8 @@ sub DESTROY {
$self->join('TERM');
}
+package PublicInbox::TestCommon::InboxWakeup;
+use strict;
+sub on_inbox_unlock { ${$_[0]}->($_[1]) }
+
1;
diff --git a/lib/PublicInbox/WatchMaildir.pm b/lib/PublicInbox/WatchMaildir.pm
index fea7d5ef9ee..22f190366a4 100644
--- a/lib/PublicInbox/WatchMaildir.pm
+++ b/lib/PublicInbox/WatchMaildir.pm
@@ -119,19 +119,6 @@ sub _done_for_now {
}
}
-sub _try_fsn_paths {
- my ($self, $scan_re, $paths) = @_;
- foreach (@$paths) {
- my $path = $_->{path};
- if ($path =~ $scan_re) {
- scan($self, $path);
- } else {
- _try_path($self, $path);
- }
- }
- _done_for_now($self);
-}
-
sub remove_eml_i { # each_inbox callback
my ($ibx, $arg) = @_;
my ($self, $eml, $loc) = @$arg;
@@ -225,16 +212,28 @@ sub quit {
sub watch_fs {
my ($self) = @_;
+ require PublicInbox::DirIdle;
my $scan = File::Temp->newdir("public-inbox-watch.$$.scan.XXXXXX",
TMPDIR => 1);
my $scandir = $self->{scandir} = $scan->dirname;
- my $re = qr!\A$scandir/!;
- my $cb = sub { _try_fsn_paths($self, $re, \@_) };
-
- eval { require Filesys::Notify::Simple } or
- die "Filesys::Notify::Simple is currently required for $0\n";
- my $fsn = Filesys::Notify::Simple->new([@{$self->{mdir}}, $scandir]);
- $fsn->wait($cb) until $self->{quit};
+ my $scan_re = qr!\A$scandir/!;
+ my $done = sub {
+ delete $self->{done_timer};
+ _done_for_now($self);
+ };
+ my $cb = sub {
+ my $path = $_[0]->fullname;
+ if ($path =~ $scan_re) {
+ scan($self, $path);
+ } else {
+ _try_path($self, $path);
+ }
+ $self->{done_timer} //= PublicInbox::DS::requeue($done);
+ };
+ my $di = PublicInbox::DirIdle->new([@{$self->{mdir}}, $scandir], $cb);
+ PublicInbox::DS->SetPostLoopCallback(sub { !$self->{quit} });
+ PublicInbox::DS->EventLoop;
+ _done_for_now($self);
}
# returns the git config section name, e.g [imap "imaps://user@example.com"]
diff --git a/script/public-inbox-watch b/script/public-inbox-watch
index 645abeda971..2057066a2a9 100755
--- a/script/public-inbox-watch
+++ b/script/public-inbox-watch
@@ -21,6 +21,7 @@ if ($watch_md) {
$watch_md->quit if $watch_md;
$watch_md = undef;
};
- alarm(1);
+ # --no-scan is only intended for testing atm, undocumented.
+ alarm(1) unless (grep(/\A--no-scan\z/, @ARGV));
$watch_md->watch while ($watch_md);
}
diff --git a/t/dir_idle.t b/t/dir_idle.t
new file mode 100644
index 00000000000..587599e83ff
--- /dev/null
+++ b/t/dir_idle.t
@@ -0,0 +1,6 @@
+#!perl -w
+# Copyright (C) 2020 all contributors <meta@public-inbox.org>
+# License: AGPL-3.0+ <https://www.gnu.org/licenses/agpl-3.0.txt>
+use Test::More;
+use_ok 'PublicInbox::DirIdle';
+done_testing;
diff --git a/t/imapd.t b/t/imapd.t
index 3f31743df2e..cc87a127851 100644
--- a/t/imapd.t
+++ b/t/imapd.t
@@ -462,7 +462,7 @@ ok($mic->logout, 'logged out');
PublicInbox::DS->Reset;
my $ii = PublicInbox::InboxIdle->new($cfg);
my $cb = sub { PublicInbox::DS->SetPostLoopCallback(sub {}) };
- my $obj = bless \$cb, 'InboxWakeup';
+ my $obj = bless \$cb, 'PublicInbox::TestCommon::InboxWakeup';
$cfg->each_inbox(sub { $_[0]->subscribe_unlock('ident', $obj) });
open my $err, '+>', undef or BAIL_OUT $!;
my $w = start_script(['-watch'], undef, { 2 => $err });
@@ -488,7 +488,3 @@ unlike($eout, qr/wide/i, 'no Wide character warnings');
unlike($eout, qr/uninitialized/i, 'no uninitialized warnings');
done_testing;
-
-package InboxWakeup;
-use strict;
-sub on_inbox_unlock { ${$_[0]}->() }
diff --git a/t/watch_filter_rubylang.t b/t/watch_filter_rubylang.t
index 2e7d402e5fa..db48cb2ffde 100644
--- a/t/watch_filter_rubylang.t
+++ b/t/watch_filter_rubylang.t
@@ -6,7 +6,7 @@ use PublicInbox::TestCommon;
use Test::More;
use PublicInbox::Eml;
use PublicInbox::Config;
-require_mods(qw(Filesys::Notify::Simple DBD::SQLite Search::Xapian));
+require_mods(qw(DBD::SQLite Search::Xapian));
use_ok 'PublicInbox::WatchMaildir';
use_ok 'PublicInbox::Emergency';
my ($tmpdir, $for_destroy) = tmpdir();
diff --git a/t/watch_maildir.t b/t/watch_maildir.t
index 33a3458bd4d..a2c09b0351b 100644
--- a/t/watch_maildir.t
+++ b/t/watch_maildir.t
@@ -7,7 +7,6 @@ use Cwd;
use PublicInbox::Config;
use PublicInbox::TestCommon;
use PublicInbox::Import;
-require_mods(qw(Filesys::Notify::Simple));
my ($tmpdir, $for_destroy) = tmpdir();
my $git_dir = "$tmpdir/test.git";
my $maildir = "$tmpdir/md";
@@ -47,14 +46,22 @@ EOF
'only got the spam folder to watch');
}
-my $config = PublicInbox::Config->new(\<<EOF);
-$cfgpfx.address=$addr
-$cfgpfx.inboxdir=$git_dir
-$cfgpfx.watch=maildir:$maildir
-$cfgpfx.filter=PublicInbox::Filter::Vger
-publicinboxlearn.watchspam=maildir:$spamdir
+my $cfg_path = "$tmpdir/config";
+{
+ open my $fh, '>', $cfg_path or BAIL_OUT $!;
+ print $fh <<EOF or BAIL_OUT $!;
+[publicinbox "test"]
+ address = $addr
+ inboxdir = $git_dir
+ watch = maildir:$maildir
+ filter = PublicInbox::Filter::Vger
+[publicinboxlearn]
+ watchspam = maildir:$spamdir
EOF
+ close $fh or BAIL_OUT $!;
+}
+my $config = PublicInbox::Config->new($cfg_path);
PublicInbox::WatchMaildir->new($config)->scan('full');
my $git = PublicInbox::Git->new($git_dir);
my @list = $git->qx(qw(rev-list refs/heads/master));
@@ -136,6 +143,70 @@ More majordomo info at http://vger.kernel.org/majordomo-info.html\n);
like($$mref, qr/something\n\z/s, 'message scrubbed on import');
}
+# end-to-end test which actually uses inotify/kevent
+{
+ my $env = { PI_CONFIG => $cfg_path };
+ $git->cleanup;
+
+ # n.b. --no-scan is only intended for testing atm
+ my $wm = start_script([qw(-watch --no-scan)], $env);
+ my $eml = eml_load('t/data/0001.patch');
+ $eml->header_set('Cc', $addr);
+ my $em = PublicInbox::Emergency->new($maildir);
+ $em->prepare(\($eml->as_string));
+
+ use_ok 'PublicInbox::InboxIdle';
+ use_ok 'PublicInbox::DS';
+ my $delivered = 0;
+ my $cb = sub {
+ my ($ibx) = @_;
+ diag "message delivered to `$ibx->{name}'";
+ $delivered++;
+ };
+ PublicInbox::DS->Reset;
+ my $ii = PublicInbox::InboxIdle->new($config);
+ my $obj = bless \$cb, 'PublicInbox::TestCommon::InboxWakeup';
+ $config->each_inbox(sub { $_[0]->subscribe_unlock('ident', $obj) });
+ PublicInbox::DS->SetPostLoopCallback(sub { $delivered == 0 });
+
+ # wait for -watch to setup inotify watches
+ my $sleep = 1;
+ if (eval { require Linux::Inotify2 } && -d "/proc/$wm->{pid}/fd") {
+ my $end = time + 2;
+ my (@ino, @ino_info);
+ do {
+ @ino = grep {
+ (readlink($_)//'') =~ /\binotify\b/
+ } glob("/proc/$wm->{pid}/fd/*");
+ } until (@ino || time > $end || !tick);
+ if (scalar(@ino) == 1) {
+ my $ino_fd = (split('/', $ino[0]))[-1];
+ my $ino_fdinfo = "/proc/$wm->{pid}/fdinfo/$ino_fd";
+ while (time < $end && open(my $fh, '<', $ino_fdinfo)) {
+ @ino_info = grep(/^inotify wd:/, <$fh>);
+ last if @ino_info >= 4;
+ tick;
+ }
+ $sleep = undef if @ino_info >= 4;
+ }
+ }
+ if ($sleep) {
+ diag "waiting ${sleep}s for -watch to start up";
+ sleep $sleep;
+ }
+
+ $em->commit; # wake -watch up
+ diag 'waiting for -watch to import new message';
+ PublicInbox::DS->EventLoop;
+ $wm->kill;
+ $wm->join;
+ $ii->close;
+ PublicInbox::DS->Reset;
+ my $head = $git->qx(qw(cat-file commit HEAD));
+ my $subj = $eml->header('Subject');
+ like($head, qr/^\Q$subj\E/sm, 'new commit made');
+}
+
sub is_maildir {
my ($dir) = @_;
PublicInbox::WatchMaildir::is_maildir($dir);
diff --git a/t/watch_maildir_v2.t b/t/watch_maildir_v2.t
index 19a2da77070..6cc8b6ff0e9 100644
--- a/t/watch_maildir_v2.t
+++ b/t/watch_maildir_v2.t
@@ -8,7 +8,7 @@ use PublicInbox::Config;
use PublicInbox::TestCommon;
use PublicInbox::Import;
require_git(2.6);
-require_mods(qw(Search::Xapian DBD::SQLite Filesys::Notify::Simple));
+require_mods(qw(Search::Xapian DBD::SQLite));
require PublicInbox::V2Writable;
my ($tmpdir, $for_destroy) = tmpdir();
my $inboxdir = "$tmpdir/v2";
--git a/t/watch_multiple_headers.t b/t/watch_multiple_headers.t
index 3a39eba9e0e..0ee96d5ff89 100644
--- a/t/watch_multiple_headers.t
+++ b/t/watch_multiple_headers.t
@@ -5,7 +5,7 @@ use Test::More;
use PublicInbox::Config;
use PublicInbox::TestCommon;
require_git(2.6);
-require_mods(qw(Search::Xapian DBD::SQLite Filesys::Notify::Simple));
+require_mods(qw(Search::Xapian DBD::SQLite));
my ($tmpdir, $for_destroy) = tmpdir();
my $inboxdir = "$tmpdir/v2";
my $maildir = "$tmpdir/md";
^ permalink raw reply related [relevance 3%]
* [PATCH 00/34] watch: add IMAP and NNTP support
@ 2020-06-27 10:03 7% Eric Wong
2020-06-27 10:03 3% ` [PATCH 10/34] watch: remove Filesys::Notify::Simple dependency Eric Wong
0 siblings, 1 reply; 2+ results
From: Eric Wong @ 2020-06-27 10:03 UTC (permalink / raw)
To: meta
Some fairly major changes to -watch. Filesys::Notify::Simple is
no longer used, and -watch now uses inotify, signalfd or kevent
like the read-only daemons.
Credentials are handled via Net::Netrc (Perl standard library)
or "git-credential", so we do no password storage on our own.
NNTP (and non-IDLE IMAP) may allow more parallelization in the
future.
One significant project-wide change is getting rid of "use
fields". It gets in my way more than it helps, and it's
probably alien to a fair amount of Perl hackers. AFAIK, it's
never really been popular outside of Danga::Socket-based
projects.
Eric W. Biederman (1):
IMAPTracker: Add a helper to track our place in reading imap mailboxes
Eric Wong (33):
inboxwritable: ensure ssoma.lock exists on init
inbox: warn on ->on_inbox_unlock exception
imaptracker: use ~/.local/share/public-inbox/imap.sqlite3
watchmaildir: hoist out compile_watchheaders
watchmaildir: fix check for spam vs ham inbox conflicts
URI IMAP support
watch: preliminary IMAP support
kqnotify|fake_inotify: detect Maildir write ops
watch: remove Filesys::Notify::Simple dependency
watch: use signalfd for Maildir watching
ds: remove fields.pm usage
watch: wire up IMAP IDLE reapers to DS
watch: support IMAP polling
config: support ->urlmatch method for -watch
watch: stop importers before forking
watch: use UID SEARCH to avoid empty UID FETCH
ds: add_timer: allow passing arg to callback.
imaptracker: add {url} field to reduce args
imaptracker: drop {dbname} field
watch: avoid long transaction when writing to IMAPTracker
watch: support imap.fetchBatchSize parameter
watch: imap: be quieter about disconnecting on quit
watch: support multiple watch: directives per-inbox
watch: remove {mdir} array
watch: just use ->urlmatch
testcommon: $ENV{TAIL} supports non-@ARGV redirects
watch: add NNTP support
watch: show user-specified URL consistently.
watch: enable autoflush for STDOUT and STDERR
watch: use our own "git credential" wrapper
watch: support ~/.netrc via Net::Netrc
imaptracker: use flock(2) around writes
watch: simplify internal structures
Documentation/public-inbox-watch.pod | 3 +-
INSTALL | 8 -
MANIFEST | 11 +
Makefile.PL | 4 -
ci/deps.perl | 1 -
lib/PublicInbox/Config.pm | 21 +-
lib/PublicInbox/DS.pm | 29 +-
lib/PublicInbox/Daemon.pm | 19 +-
lib/PublicInbox/DirIdle.pm | 49 ++
lib/PublicInbox/FakeInotify.pm | 56 +-
lib/PublicInbox/GitAsyncCat.pm | 4 +-
lib/PublicInbox/GitCredential.pm | 55 ++
lib/PublicInbox/HTTP.pm | 23 +-
lib/PublicInbox/HTTPD/Async.pm | 22 +-
lib/PublicInbox/IMAP.pm | 19 +-
lib/PublicInbox/IMAPTracker.pm | 82 +++
lib/PublicInbox/In2Tie.pm | 13 +
lib/PublicInbox/Inbox.pm | 1 +
lib/PublicInbox/InboxIdle.pm | 20 +-
lib/PublicInbox/InboxWritable.pm | 3 +
lib/PublicInbox/KQNotify.pm | 38 +-
lib/PublicInbox/Listener.pm | 8 +-
lib/PublicInbox/NNTP.pm | 12 +-
lib/PublicInbox/NNTPdeflate.pm | 5 +-
lib/PublicInbox/ParentPipe.pm | 8 +-
lib/PublicInbox/Sigfd.pm | 21 +-
lib/PublicInbox/TestCommon.pm | 40 +-
lib/PublicInbox/URIimap.pm | 113 +++
lib/PublicInbox/WatchMaildir.pm | 998 +++++++++++++++++++++++----
script/public-inbox-watch | 33 +-
t/config.t | 18 +
t/dir_idle.t | 6 +
t/fake_inotify.t | 45 ++
t/imap_tracker.t | 54 ++
t/imapd.t | 74 ++
t/kqnotify.t | 41 ++
t/nntpd.t | 52 ++
t/uri_imap.t | 65 ++
t/watch_filter_rubylang.t | 2 +-
t/watch_imap.t | 21 +
t/watch_maildir.t | 96 ++-
t/watch_maildir_v2.t | 4 +-
t/watch_multiple_headers.t | 2 +-
t/watch_nntp.t | 17 +
xt/mem-imapd-tls.t | 18 +-
45 files changed, 1944 insertions(+), 290 deletions(-)
create mode 100644 lib/PublicInbox/DirIdle.pm
create mode 100644 lib/PublicInbox/GitCredential.pm
create mode 100644 lib/PublicInbox/IMAPTracker.pm
create mode 100644 lib/PublicInbox/URIimap.pm
create mode 100644 t/dir_idle.t
create mode 100644 t/fake_inotify.t
create mode 100644 t/imap_tracker.t
create mode 100644 t/kqnotify.t
create mode 100644 t/uri_imap.t
create mode 100644 t/watch_imap.t
create mode 100644 t/watch_nntp.t
^ permalink raw reply [relevance 7%]
Results 1-2 of 2 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2020-06-27 10:03 7% [PATCH 00/34] watch: add IMAP and NNTP support Eric Wong
2020-06-27 10:03 3% ` [PATCH 10/34] watch: remove Filesys::Notify::Simple dependency Eric Wong
Code repositories for project(s) associated with this public inbox
https://80x24.org/public-inbox.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).