[PATCH 1/2] t5534: new test case for atomic signed push

[PATCH 1/2] t5534: new test case for atomic signed push

[Han Xin]

In order to test signed atomic push, add a new test case.

Reviewed-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
---
 t/t5534-push-signed.sh | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
index 030331f1c5..d0fcdc900e 100755
--- a/t/t5534-push-signed.sh
+++ b/t/t5534-push-signed.sh
@@ -273,4 +273,21 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
 	test_cmp expect dst/push-cert-status
 '
 
+test_expect_failure GPG 'check atomic push before running GPG' '
+	prepare_dst &&
+	git -C dst config receive.certnonceseed sekrit &&
+	write_script gpg <<-EOF &&
+	echo >&2 "Fake gpg is called."
+	exit 1
+	EOF
+	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push --signed --atomic \
+			dst noop ff noff >out 2>&1 &&
+	grep "^error:" out >actual &&
+	cat >expect <<-EOF &&
+	error: atomic push failed for ref refs/heads/noff. status: 2
+	error: failed to push some refs to '"'"'dst'"'"'
+	EOF
+	test_i18ncmp expect actual
+'
+
 test_done
-- 
2.28.0

[PATCH 2/2] send-pack: check atomic push before running GPG

[Han Xin]

Atomic push may be rejected, which makes it meanigless to generate push
cert first. Therefore, the push cert generation was moved after atomic
check.

Reviewed-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
---
 send-pack.c            | 14 +++++++-------
 t/t5534-push-signed.sh |  2 +-
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/send-pack.c b/send-pack.c
index d671ab5d05..58416a6f6d 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -447,13 +447,6 @@ int send_pack(struct send_pack_args *args,
 		if (ref->deletion && !allow_deleting_refs)
 			ref->status = REF_STATUS_REJECT_NODELETE;
 
-	if (!args->dry_run)
-		advertise_shallow_grafts_buf(&req_buf);
-
-	if (!args->dry_run && push_cert_nonce)
-		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
-					       cap_buf.buf, push_cert_nonce);
-
 	/*
 	 * Clear the status for each ref and see if we need to send
 	 * the pack data.
@@ -489,6 +482,13 @@ int send_pack(struct send_pack_args *args,
 			ref->status = REF_STATUS_EXPECTING_REPORT;
 	}
 
+	if (!args->dry_run)
+		advertise_shallow_grafts_buf(&req_buf);
+
+	if (!args->dry_run && push_cert_nonce)
+		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
+					       cap_buf.buf, push_cert_nonce);
+
 	/*
 	 * Finally, tell the other end!
 	 */
diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
index d0fcdc900e..927750a408 100755
--- a/t/t5534-push-signed.sh
+++ b/t/t5534-push-signed.sh
@@ -273,7 +273,7 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
 	test_cmp expect dst/push-cert-status
 '
 
-test_expect_failure GPG 'check atomic push before running GPG' '
+test_expect_success GPG 'check atomic push before running GPG' '
 	prepare_dst &&
 	git -C dst config receive.certnonceseed sekrit &&
 	write_script gpg <<-EOF &&
-- 
2.28.0

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[Junio C Hamano]

Han Xin <chiyutianyi@gmail.com> writes:

> Atomic push may be rejected, which makes it meanigless to generate push
> cert first. Therefore, the push cert generation was moved after atomic
> check.

The overstatement "may be rejected" is probably a bit misleading the
readers and reviewers.  REF_STATUS_REJECT_NONFASTFORWARD may be
observed by check_to_send_update() but the reason is set in
set_ref_status_for_push(), which locally decides not to propose a
no-ff ref update to the other side.  At this point of the control
flow, the other side hasn't have a chance to reject the push,
because "we want you to update these refs to these new values" is
yet to be sent (it is done after composing the push certificate).

    We may decide not to push (e.g. their ref may not fast forward
    to what we are pushing) at this point in the code.  Checking the
    condition first will save us to ask GPG to sign the push
    certificate, since we will not send it to the other side.


> -	if (!args->dry_run)
> -		advertise_shallow_grafts_buf(&req_buf);

Why should this be moved?  It doesn't seem to have anything to do
with the push certificate.

> -
> -	if (!args->dry_run && push_cert_nonce)
> -		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
> -					       cap_buf.buf, push_cert_nonce);
> -
>  	/*
>  	 * Clear the status for each ref and see if we need to send
>  	 * the pack data.

This "Clear the status for each ref" worries me.  

The generate_push_cert() function RELIES on ref->status and filters
out the ref that failed to pass the local check from the generated
push certificate.  If you let the loop (post context of this hunk)
run, ref->status will be updated by it, so the net effect of this
patch is that it breaks "non-atomic" case that pushes multiple refs
and one of ref fails to pass the local check.

IOW, generate_push_cert() MUST be called before this loop "clears
the status for each ref" by assigning to ref->status.

> @@ -489,6 +482,13 @@ int send_pack(struct send_pack_args *args,
>  			ref->status = REF_STATUS_EXPECTING_REPORT;
>  	}
>  
> +	if (!args->dry_run)
> +		advertise_shallow_grafts_buf(&req_buf);
> +
> +	if (!args->dry_run && push_cert_nonce)
> +		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
> +					       cap_buf.buf, push_cert_nonce);
> +

So, this change as-is is probably a bad idea.

I wonder if generate_push_cert() can be told about atomicity of the
push, though.  There is this loop in the function:

	int update_seen = 0;

	...
	for (ref = remote_refs; ref; ref = ref->next) {
		if (check_to_send_update(ref, args) < 0)
			continue;
		update_seen = 1;
		strbuf_addf(&cert, "%s %s %s\n",
			    oid_to_hex(&ref->old_oid),
			    oid_to_hex(&ref->new_oid),
			    ref->name);
	}
	if (!update_seen)
		goto free_return;

that makes it a no-op without invoking GPG if no update is needed.
Perhaps we can extend it to

	int failure_seen = 0;
        int update_seen = 0;

	...
	for (ref = remote_refs; ref; ref = ref->next) {
		switch (check_to_send_update(ref, args)) {
		case CHECK_REF_STATUS_REJECTED:
			failure_seen = 1;
			break;
		case 0:
			update_seen = 1;
			break;
                case REF_STATUS_UPTODATE:
			break; /* OK */
		default:
			BUG("should not happen");
		}
		strbuf_addf(&cert, "%s %s %s\n",
			    oid_to_hex(&ref->old_oid),
			    oid_to_hex(&ref->new_oid),
			    ref->name);
	}
	if (!update_seen || (use_atomic && failure_seen))
		goto free_return;

to make it also a no-op when any local rejection under atomic mode?

Thanks.

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[Junio C Hamano]

Junio C Hamano <gitster@pobox.com> writes:

> I wonder if generate_push_cert() can be told about atomicity of the
> push, though.  There is this loop in the function:
>
> 	int update_seen = 0;
>
> 	...
> 	for (ref = remote_refs; ref; ref = ref->next) {
> 		if (check_to_send_update(ref, args) < 0)
> 			continue;
> 		update_seen = 1;
> 		strbuf_addf(&cert, "%s %s %s\n",
> 			    oid_to_hex(&ref->old_oid),
> 			    oid_to_hex(&ref->new_oid),
> 			    ref->name);
> 	}
> 	if (!update_seen)
> 		goto free_return;
>
> that makes it a no-op without invoking GPG if no update is needed.
> Perhaps we can extend it to
>
> 	int failure_seen = 0;
>         int update_seen = 0;
>
> 	...
> 	for (ref = remote_refs; ref; ref = ref->next) {
> 		switch (check_to_send_update(ref, args)) {
> 		case CHECK_REF_STATUS_REJECTED:
> 			failure_seen = 1;
> 			break;

This "break" should be "continue" here.  We want to exclude the ones
that we are not going to send to the other side from the push
certificate (in non-atomic case).

> 		case 0:
> 			update_seen = 1;
> 			break;
>               case REF_STATUS_UPTODATE:
> 			break; /* OK */
> 		default:
> 			BUG("should not happen");
> 		}
> 		strbuf_addf(&cert, "%s %s %s\n",
> 			    oid_to_hex(&ref->old_oid),
> 			    oid_to_hex(&ref->new_oid),
> 			    ref->name);
> 	}
> 	if (!update_seen || (use_atomic && failure_seen))
> 		goto free_return;
>
> to make it also a no-op when any local rejection under atomic mode?
>
> Thanks.

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[Jiang Xin]

Junio C Hamano <gitster@pobox.com> 于2020年9月16日周三 上午5:08写道：
>
> Han Xin <chiyutianyi@gmail.com> writes:
>
> > Atomic push may be rejected, which makes it meanigless to generate push
> > cert first. Therefore, the push cert generation was moved after atomic
> > check.
>
> The overstatement "may be rejected" is probably a bit misleading the
> readers and reviewers.  REF_STATUS_REJECT_NONFASTFORWARD may be
> observed by check_to_send_update() but the reason is set in
> set_ref_status_for_push(), which locally decides not to propose a
> no-ff ref update to the other side.  At this point of the control
> flow, the other side hasn't have a chance to reject the push,
> because "we want you to update these refs to these new values" is
> yet to be sent (it is done after composing the push certificate).
>
>     We may decide not to push (e.g. their ref may not fast forward
>     to what we are pushing) at this point in the code.  Checking the
>     condition first will save us to ask GPG to sign the push
>     certificate, since we will not send it to the other side.
>

It's always hard for a new contributor to write a decent commit log message.

>
> > -     if (!args->dry_run)
> > -             advertise_shallow_grafts_buf(&req_buf);
>
> Why should this be moved?  It doesn't seem to have anything to do
> with the push certificate.
>

Checking the condition first will also save us to prepare shallow advertise.

> > -
> > -     if (!args->dry_run && push_cert_nonce)
> > -             cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
> > -                                            cap_buf.buf, push_cert_nonce);
> > -
> >       /*
> >        * Clear the status for each ref and see if we need to send
> >        * the pack data.
>
> This "Clear the status for each ref" worries me.
>
> The generate_push_cert() function RELIES on ref->status and filters
> out the ref that failed to pass the local check from the generated
> push certificate.  If you let the loop (post context of this hunk)
> run, ref->status will be updated by it, so the net effect of this
> patch is that it breaks "non-atomic" case that pushes multiple refs
> and one of ref fails to pass the local check.
>
> IOW, generate_push_cert() MUST be called before this loop "clears
> the status for each ref" by assigning to ref->status.
>

The next block ("Finally, tell the other end!") is what we send
commands to "receive-pack", right after some of the status are reset
to REF_STATUS_OK or REF_STATUS_EXPECTING_REPORT by this chunk of code.
So moving the generate_push_cert() part right before the "Finally,
tell the other end!" part LGTM.

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[Junio C Hamano]

Jiang Xin <worldhello.net@gmail.com> writes:

>> > -
>> > -     if (!args->dry_run && push_cert_nonce)
>> > -             cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
>> > -                                            cap_buf.buf, push_cert_nonce);
>> > -
>> >       /*
>> >        * Clear the status for each ref and see if we need to send
>> >        * the pack data.
>>
>> This "Clear the status for each ref" worries me.
>>
>> The generate_push_cert() function RELIES on ref->status and filters
>> out the ref that failed to pass the local check from the generated
>> push certificate.  If you let the loop (post context of this hunk)
>> run, ref->status will be updated by it, so the net effect of this
>> patch is that it breaks "non-atomic" case that pushes multiple refs
>> and one of ref fails to pass the local check.
>>
>> IOW, generate_push_cert() MUST be called before this loop "clears
>> the status for each ref" by assigning to ref->status.
>
> The next block ("Finally, tell the other end!") is what we send
> commands to "receive-pack", right after some of the status are reset
> to REF_STATUS_OK or REF_STATUS_EXPECTING_REPORT by this chunk of code.
> So moving the generate_push_cert() part right before the "Finally,
> tell the other end!" part LGTM.

Sorry, I do not follow.  The loop in question is the one before
"Finally tell the other end".  The loop ends like so:

	for (ref = remote_refs; ref; ref = ref->next) {
		...
		if (args->dry_run || !status_report)
			ref->status = REF_STATUS_OK;
		else
			ref->status = REF_STATUS_EXPECTING_REPORT;
	}

and the patch moves a call to generate_push_cert() that looks at
remote_refs _after_ this loop, but generate_push_cert() function
uses a loop over remote_refs that uses check_to_send_update(), which
looks at ref->status's value to decide what to do.  Its correct
operation relies on ref->status NOT updated by the above loop.

The loop prepares the status field so that we can then read and
record the response against each ref updates from the other side.

The ref->status field is set to EXPECTING_REPORT, later to be
updated to REF_STATUS_OK or REF_STATUS_REMOTE_REJECT.  We can
clobber the original value of ref->status at this point only because
the loop depends on the fact that no check_to_send_update() call
will happen after the loop (because the ref->status field the
helper's operation depends on is already reset for the next phase of
operation).  The patch that moves generate_push_cert() call below
the loop, whether it is before or after the "Finally tell the other
end" loop, is therefore fundamentally broken, isn't it?

I do not think it would introduce such breakage if we teach
generate_push_cert() to pay attention to the atomicity, and that can
be done without reordering the calls in send_pack() to break the
control flow.

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[Jiang Xin]

Junio C Hamano <gitster@pobox.com> writes:

> > The next block ("Finally, tell the other end!") is what we send
> > commands to "receive-pack", right after some of the status are reset
> > to REF_STATUS_OK or REF_STATUS_EXPECTING_REPORT by this chunk of code.
> > So moving the generate_push_cert() part right before the "Finally,
> > tell the other end!" part LGTM.
> 
> Sorry, I do not follow.  The loop in question is the one before
> "Finally tell the other end".  The loop ends like so:
> 
> 	for (ref = remote_refs; ref; ref = ref->next) {
> 		...
> 		if (args->dry_run || !status_report)
> 			ref->status = REF_STATUS_OK;
> 		else
> 			ref->status = REF_STATUS_EXPECTING_REPORT;
> 	}
> 
> and the patch moves a call to generate_push_cert() that looks at
> remote_refs _after_ this loop, but generate_push_cert() function
> uses a loop over remote_refs that uses check_to_send_update(), which
> looks at ref->status's value to decide what to do.  Its correct
> operation relies on ref->status NOT updated by the above loop.
> 

To make it clear, I refactor the Han Xin's patch, quote and add comments
as follows (changes on whitespace are ignored):


>>         /*
>>          * NEEDSWORK: why does delete-refs have to be so specific to
>>          * send-pack machinery that set_ref_status_for_push() cannot
>>          * set this bit for us???
>>          */
>>         for (ref = remote_refs; ref; ref = ref->next)
>>             if (ref->deletion && !allow_deleting_refs)
>>                 ref->status = REF_STATUS_REJECT_NODELETE;
>>     
>>    -    if (!args->dry_run)
>>    -        advertise_shallow_grafts_buf(&req_buf);
>>    -
>>    -    if (!args->dry_run && push_cert_nonce)
>>    -        cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
>>    -                                       cap_buf.buf, push_cert_nonce);
>>    -
>>         /*
>>          * Clear the status for each ref and see if we need to send
>>          * the pack data.
>>          */
>>         for (ref = remote_refs; ref; ref = ref->next) {
>>             switch (check_to_send_update(ref, args)) {
>>             case 0: /* no error */
>>                 break;
>>             case CHECK_REF_STATUS_REJECTED:
>>                 /*
>>                  * When we know the server would reject a ref update if
>>                  * we were to send it and we're trying to send the refs
>>                  * atomically, abort the whole operation.
>>                  */
>>                 if (use_atomic) {
>>                     strbuf_release(&req_buf);
>>                     strbuf_release(&cap_buf);
>>                     reject_atomic_push(remote_refs, args->send_mirror);
>>                     error("atomic push failed for ref %s. status: %d\n",
>>                           ref->name, ref->status);
>>                     return args->porcelain ? 0 : -1;
>>                 }
>>                 /* else fallthrough */
>>             default:
>>                 continue;
>>             }
>>             if (!ref->deletion)
>>                 need_pack_data = 1;
>>     
>>             if (args->dry_run || !status_report)
>>                 ref->status = REF_STATUS_OK;
>>             else
>>                 ref->status = REF_STATUS_EXPECTING_REPORT;
>>         }
>>     
>>    +    if (!args->dry_run)
>>    +        advertise_shallow_grafts_buf(&req_buf);
>>    +
>>    +
>>         /*
>>          * Finally, tell the other end!
>>          */
>>    +    if (!args->dry_run && push_cert_nonce)
>>    +        cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
>>    +                           cap_buf.buf, push_cert_nonce);

Moving `generate_push_cert()` here, will: 
1. Increase the perforcemance a little bit for failed atomic push.
2. Make it clear that the commands will be sent only once.
   For GPG-signed push, commands will be sent via `generate_push_cert()`,
   and for non-GPG-signed push, commands will be sent using the following code.
3. For GPG-signed push, won't run the following loop.

>>    +    else if (!args->dry_run)
>>             for (ref = remote_refs; ref; ref = ref->next) {
>>                 char *old_hex, *new_hex;
>>     
>>    -            if (args->dry_run || push_cert_nonce)
>>    -                continue;
>>    -
>>                 if (check_to_send_update(ref, args) < 0)
>>                     continue;

In the original "Finally, tell the other end" block, the function
`check_to_send_update()` is also called for non-PGP-signed push.
The 'ref->status' changed by the "Clear the status" block won't 
make any difference for the return value of the function
`check_to_send_update()`. Refs even with status REF_STATUS_OK and
REF_STATUS_EXPECTING_REPORT will be sent to the server side.

>>     
>>                 old_hex = oid_to_hex(&ref->old_oid);
>>                 new_hex = oid_to_hex(&ref->new_oid);
>>                 if (!cmds_sent) {
>>                     packet_buf_write(&req_buf,
>>                              "%s %s %s%c%s",
>>                              old_hex, new_hex, ref->name, 0,
>>                              cap_buf.buf);
>>                     cmds_sent = 1;
>>                 } else {
>>                     packet_buf_write(&req_buf, "%s %s %s",
>>                              old_hex, new_hex, ref->name);
>>                 }
>>             }


> The loop prepares the status field so that we can then read and
> record the response against each ref updates from the other side.
> 
> The ref->status field is set to EXPECTING_REPORT, later to be
> updated to REF_STATUS_OK or REF_STATUS_REMOTE_REJECT.  We can
> clobber the original value of ref->status at this point only because
> the loop depends on the fact that no check_to_send_update() call
> will happen after the loop (because the ref->status field the
> helper's operation depends on is already reset for the next phase of
> operation).  The patch that moves generate_push_cert() call below
> the loop, whether it is before or after the "Finally tell the other
> end" loop, is therefore fundamentally broken, isn't it?
> 
> I do not think it would introduce such breakage if we teach
> generate_push_cert() to pay attention to the atomicity, and that can
> be done without reordering the calls in send_pack() to break the
> control flow.

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[Junio C Hamano]

Jiang Xin <worldhello.net@gmail.com> writes:

> In the original "Finally, tell the other end" block, the function
> `check_to_send_update()` is also called for non-PGP-signed push.
> The 'ref->status' changed by the "Clear the status" block won't 
> make any difference for the return value of the function
> `check_to_send_update()`. Refs even with status REF_STATUS_OK and
> REF_STATUS_EXPECTING_REPORT will be sent to the server side.

Ah, yes, I re-read the code in check_to_send_update() and you're
right that it does the right thing.  I however strongly suspect it
just happens to do the right thing by accident and not by design.

I'd prefer to see a bit more tightening done to the function to
clarify the handling of these two values that are omitted from the
case arms in the switch statement, perhaps like this, as a
preliminary clean-up.

As a further clean-up, we probably should stop relying on the 'default'
label.  

There are other REF_STATUS values that are not handled explicitly,
among which REF_STATUS_ATOMIC_PUSH_FAILED looks like the most
troublesome one.

The function will return 0 (success) for ATOMIC_PUSH_FAILED, but the
current ordering of the codeflow makes sure check_to_send_update()
is *not* called after ref->status is turned into that value and that
would be the only thing that may be ensuring the correctness.  There
may be other ones we are not handling quite right.




 send-pack.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/send-pack.c b/send-pack.c
index 632f1580ca..347fb15633 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -244,7 +244,12 @@ static int check_to_send_update(const struct ref *ref, const struct send_pack_ar
 		return CHECK_REF_STATUS_REJECTED;
 	case REF_STATUS_UPTODATE:
 		return CHECK_REF_UPTODATE;
+
 	default:
+	case REF_STATUS_EXPECTING_REPORT:
+		/* already passed checks on the local side */
+	case REF_STATUS_OK:
+		/* of course this is OK */
 		return 0;
 	}
 }

[PATCH v2] send-pack: run GPG after atomic push checking

[Han Xin]

The refs update commands can be sent to the server side in two different
ways: GPG-signed or unsigned.  We should run these two operations in the
same "Finally, tell the other end!" code block, but they are seperated
by the "Clear the status for each ref" code block.  This will result in
a slight performance loss, because the failed atomic push will still
perform unnecessary preparations for shallow advertise and GPG-signed
commands buffers.

Add a new test case to t5534 to ensure GPG will not be called when the
GPG-signed atomic push fails.

Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
---
 send-pack.c            | 58 ++++++++++++++++++++++--------------------
 t/t5534-push-signed.sh | 21 +++++++++++++++
 2 files changed, 51 insertions(+), 28 deletions(-)

diff --git a/send-pack.c b/send-pack.c
index d671ab5d05..f227b7315e 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -244,7 +244,12 @@ static int check_to_send_update(const struct ref *ref, const struct send_pack_ar
 		return CHECK_REF_STATUS_REJECTED;
 	case REF_STATUS_UPTODATE:
 		return CHECK_REF_UPTODATE;
+
 	default:
+	case REF_STATUS_EXPECTING_REPORT:
+		/* already passed checks on the local side */
+	case REF_STATUS_OK:
+		/* of course this is OK */
 		return 0;
 	}
 }
@@ -447,13 +452,6 @@ int send_pack(struct send_pack_args *args,
 		if (ref->deletion && !allow_deleting_refs)
 			ref->status = REF_STATUS_REJECT_NODELETE;
 
-	if (!args->dry_run)
-		advertise_shallow_grafts_buf(&req_buf);
-
-	if (!args->dry_run && push_cert_nonce)
-		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
-					       cap_buf.buf, push_cert_nonce);
-
 	/*
 	 * Clear the status for each ref and see if we need to send
 	 * the pack data.
@@ -489,31 +487,35 @@ int send_pack(struct send_pack_args *args,
 			ref->status = REF_STATUS_EXPECTING_REPORT;
 	}
 
+	if (!args->dry_run)
+		advertise_shallow_grafts_buf(&req_buf);
+
 	/*
 	 * Finally, tell the other end!
 	 */
-	for (ref = remote_refs; ref; ref = ref->next) {
-		char *old_hex, *new_hex;
-
-		if (args->dry_run || push_cert_nonce)
-			continue;
-
-		if (check_to_send_update(ref, args) < 0)
-			continue;
-
-		old_hex = oid_to_hex(&ref->old_oid);
-		new_hex = oid_to_hex(&ref->new_oid);
-		if (!cmds_sent) {
-			packet_buf_write(&req_buf,
-					 "%s %s %s%c%s",
-					 old_hex, new_hex, ref->name, 0,
-					 cap_buf.buf);
-			cmds_sent = 1;
-		} else {
-			packet_buf_write(&req_buf, "%s %s %s",
-					 old_hex, new_hex, ref->name);
+	if (!args->dry_run && push_cert_nonce)
+		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
+					       cap_buf.buf, push_cert_nonce);
+	else if (!args->dry_run)
+		for (ref = remote_refs; ref; ref = ref->next) {
+			char *old_hex, *new_hex;
+
+			if (check_to_send_update(ref, args) < 0)
+				continue;
+
+			old_hex = oid_to_hex(&ref->old_oid);
+			new_hex = oid_to_hex(&ref->new_oid);
+			if (!cmds_sent) {
+				packet_buf_write(&req_buf,
+						 "%s %s %s%c%s",
+						 old_hex, new_hex, ref->name, 0,
+						 cap_buf.buf);
+				cmds_sent = 1;
+			} else {
+				packet_buf_write(&req_buf, "%s %s %s",
+						 old_hex, new_hex, ref->name);
+			}
 		}
-	}
 
 	if (use_push_options) {
 		struct string_list_item *item;
diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
index 030331f1c5..a8638f16be 100755
--- a/t/t5534-push-signed.sh
+++ b/t/t5534-push-signed.sh
@@ -273,4 +273,25 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
 	test_cmp expect dst/push-cert-status
 '
 
+test_expect_success GPG 'failed atomic push does not execute GPG' '
+	prepare_dst &&
+	git -C dst config receive.certnonceseed sekrit &&
+	write_script gpg <<-EOF &&
+	# should check atomic push locally before running GPG.
+	exit 1
+	EOF
+	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push \
+			--signed --atomic --porcelain \
+			dst noop ff noff >out 2>&1 &&
+	sed -n -e "/^To dst/,$ p" out >actual &&
+	cat >expect <<-EOF &&
+	To dst
+	=	refs/heads/noop:refs/heads/noop	[up to date]
+	!	refs/heads/ff:refs/heads/ff	[rejected] (atomic push failed)
+	!	refs/heads/noff:refs/heads/noff	[rejected] (non-fast-forward)
+	Done
+	EOF
+	test_i18ncmp expect actual
+'
+
 test_done
-- 
2.28.0

Re: [PATCH v2] send-pack: run GPG after atomic push checking

[Junio C Hamano]

Han Xin <chiyutianyi@gmail.com> writes:

> The refs update commands can be sent to the server side in two different
> ways: GPG-signed or unsigned.  We should run these two operations in the
> same "Finally, tell the other end!" code block, but they are seperated
> by the "Clear the status for each ref" code block.  This will result in
> a slight performance loss, because the failed atomic push will still
> perform unnecessary preparations for shallow advertise and GPG-signed
> commands buffers.

I am not sure if that is a good justification for this patch. In the
context of a push that involves GPG signature, preparation of the
buffer contents to be signed can hardly be the performance
bottleneck.

Also, this change, if sold solely on the basis of performance, is
optimizing for the wrong case of the user _failing_ to propose a
push that is atomic.

The true value I see in this change is that the user won't have to
be bothered by the (possible) GPG passphrase input when there is
nothing to sign.  Let's sell the change as such instead.

> Add a new test case to t5534 to ensure GPG will not be called when the
> GPG-signed atomic push fails.

As I mentioned in the previous round of the review, I am not sure if
it is wise to expect that the exact phrasing of error messages like
"atomic push failed" and "non-fast-forward" to stay constant and the
output format of the "git push" to stay exactly the same in this
test.  

Wouldn't it be more robust to grep for a message that emitted from
the error codepath in sign_buffer(), e.g. "gpg failed to sign", in
order to ensure absense of the sign that GPG were attempted?

The replacement test I have in mind would look like the attached.

Thanks.


diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
index 030331f1c5..3eb3642abb 100755
--- a/t/t5534-push-signed.sh
+++ b/t/t5534-push-signed.sh
@@ -273,4 +273,17 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
 	test_cmp expect dst/push-cert-status
 '
 
+test_expect_success GPG 'failed atomic push does not execute GPG' '
+	prepare_dst &&
+	git -C dst config receive.certnonceseed sekrit &&
+	write_script gpg <<-EOF &&
+	# should check atomic push locally before running GPG.
+	exit 1
+	EOF
+	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push \
+			--signed --atomic --porcelain \
+			dst noop ff noff >out 2>&1 &&
+	test_i18ngrep ! "gpg failed to sign" out
+'
+
 test_done

[PATCH v3] send-pack: run GPG after atomic push checking

[Han Xin]

The refs update commands can be sent to the server side in two different
ways: GPG-signed or unsigned.  We should run these two operations in the
same "Finally, tell the other end!" code block, but they are seperated
by the "Clear the status for each ref" code block.  This will result in
a slight performance loss, because the failed atomic push will still
perform unnecessary preparations for shallow advertise and GPG-signed
commands buffers, and user may have to be bothered by the (possible) GPG
passphrase input when there is nothing to sign.

Add a new test case to t5534 to ensure GPG will not be called when the
GPG-signed atomic push fails.

Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
---
 send-pack.c            | 58 ++++++++++++++++++++++--------------------
 t/t5534-push-signed.sh | 23 +++++++++++++++++
 2 files changed, 53 insertions(+), 28 deletions(-)

diff --git a/send-pack.c b/send-pack.c
index d671ab5d05..f227b7315e 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -244,7 +244,12 @@ static int check_to_send_update(const struct ref *ref, const struct send_pack_ar
 		return CHECK_REF_STATUS_REJECTED;
 	case REF_STATUS_UPTODATE:
 		return CHECK_REF_UPTODATE;
+
 	default:
+	case REF_STATUS_EXPECTING_REPORT:
+		/* already passed checks on the local side */
+	case REF_STATUS_OK:
+		/* of course this is OK */
 		return 0;
 	}
 }
@@ -447,13 +452,6 @@ int send_pack(struct send_pack_args *args,
 		if (ref->deletion && !allow_deleting_refs)
 			ref->status = REF_STATUS_REJECT_NODELETE;
 
-	if (!args->dry_run)
-		advertise_shallow_grafts_buf(&req_buf);
-
-	if (!args->dry_run && push_cert_nonce)
-		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
-					       cap_buf.buf, push_cert_nonce);
-
 	/*
 	 * Clear the status for each ref and see if we need to send
 	 * the pack data.
@@ -489,31 +487,35 @@ int send_pack(struct send_pack_args *args,
 			ref->status = REF_STATUS_EXPECTING_REPORT;
 	}
 
+	if (!args->dry_run)
+		advertise_shallow_grafts_buf(&req_buf);
+
 	/*
 	 * Finally, tell the other end!
 	 */
-	for (ref = remote_refs; ref; ref = ref->next) {
-		char *old_hex, *new_hex;
-
-		if (args->dry_run || push_cert_nonce)
-			continue;
-
-		if (check_to_send_update(ref, args) < 0)
-			continue;
-
-		old_hex = oid_to_hex(&ref->old_oid);
-		new_hex = oid_to_hex(&ref->new_oid);
-		if (!cmds_sent) {
-			packet_buf_write(&req_buf,
-					 "%s %s %s%c%s",
-					 old_hex, new_hex, ref->name, 0,
-					 cap_buf.buf);
-			cmds_sent = 1;
-		} else {
-			packet_buf_write(&req_buf, "%s %s %s",
-					 old_hex, new_hex, ref->name);
+	if (!args->dry_run && push_cert_nonce)
+		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
+					       cap_buf.buf, push_cert_nonce);
+	else if (!args->dry_run)
+		for (ref = remote_refs; ref; ref = ref->next) {
+			char *old_hex, *new_hex;
+
+			if (check_to_send_update(ref, args) < 0)
+				continue;
+
+			old_hex = oid_to_hex(&ref->old_oid);
+			new_hex = oid_to_hex(&ref->new_oid);
+			if (!cmds_sent) {
+				packet_buf_write(&req_buf,
+						 "%s %s %s%c%s",
+						 old_hex, new_hex, ref->name, 0,
+						 cap_buf.buf);
+				cmds_sent = 1;
+			} else {
+				packet_buf_write(&req_buf, "%s %s %s",
+						 old_hex, new_hex, ref->name);
+			}
 		}
-	}
 
 	if (use_push_options) {
 		struct string_list_item *item;
diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
index 030331f1c5..7e928aff66 100755
--- a/t/t5534-push-signed.sh
+++ b/t/t5534-push-signed.sh
@@ -273,4 +273,27 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
 	test_cmp expect dst/push-cert-status
 '
 
+test_expect_success GPG 'failed atomic push does not execute GPG' '
+	prepare_dst &&
+	git -C dst config receive.certnonceseed sekrit &&
+	write_script gpg <<-EOF &&
+	# should check atomic push locally before running GPG.
+	exit 1
+	EOF
+	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push \
+			--signed --atomic --porcelain \
+			dst noop ff noff >out 2>&1 &&
+
+	test_i18ngrep ! "gpg failed to sign" out &&
+	sed -n -e "/^To dst/,$ p" out >actual &&
+	cat >expect <<-EOF &&
+	To dst
+	=	refs/heads/noop:refs/heads/noop	[up to date]
+	!	refs/heads/ff:refs/heads/ff	[rejected] (atomic push failed)
+	!	refs/heads/noff:refs/heads/noff	[rejected] (non-fast-forward)
+	Done
+	EOF
+	test_i18ncmp expect actual
+'
+
 test_done
-- 
2.28.0

Re: [PATCH v3] send-pack: run GPG after atomic push checking

[Junio C Hamano]

"Han Xin" <hanxin.hx@alibaba-inc.com> writes:

> The refs update commands can be sent to the server side in two different
> ways: GPG-signed or unsigned.  We should run these two operations in the
> same "Finally, tell the other end!" code block, but they are seperated
> by the "Clear the status for each ref" code block.  This will result in
> a slight performance loss, because the failed atomic push will still
> perform unnecessary preparations for shallow advertise and GPG-signed
> commands buffers, and user may have to be bothered by the (possible) GPG
> passphrase input when there is nothing to sign.

The above sounds as if we care about the performace loss and that is
the main motivation behind this change.  Intended?  I have an
impression that it is a hard-sell as a "performance improvement"
patch, as the saved cycles are negligible compared to everything
else that is done in the flow, and more importantly, it optimizes
for the wrong case (i.e. it fails more efficiently).

> Add a new test case to t5534 to ensure GPG will not be called when the
> GPG-signed atomic push fails.
>
> Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
> ---
...
> +	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push \
> +			--signed --atomic --porcelain \
> +			dst noop ff noff >out 2>&1 &&
> +
> +	test_i18ngrep ! "gpg failed to sign" out &&

OK, that is much less brittle than the "output must match these
lines exactly" test we saw earlier.

> +	sed -n -e "/^To dst/,$ p" out >actual &&
> +	cat >expect <<-EOF &&
> +	To dst
> +	=	refs/heads/noop:refs/heads/noop	[up to date]
> +	!	refs/heads/ff:refs/heads/ff	[rejected] (atomic push failed)
> +	!	refs/heads/noff:refs/heads/noff	[rejected] (non-fast-forward)
> +	Done
> +	EOF
> +	test_i18ncmp expect actual

Didn't you mean to remove this part, which makes the whole test more
brittle than necessary?

Thanks.

[PATCH v4] send-pack: run GPG after atomic push checking

[Han Xin]

The refs update commands can be sent to the server side in two different
ways: GPG-signed or unsigned.  We should run these two operations in the
same "Finally, tell the other end!" code block, but they are seperated
by the "Clear the status for each ref" code block. This will make user
bothered by the (possible) GPG passphrase input even when there is nothing
to sign.

Add a new test case to t5534 to ensure GPG will not be called when the
GPG-signed atomic push fails.

Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
---
 send-pack.c            | 58 ++++++++++++++++++++++--------------------
 t/t5534-push-signed.sh | 13 ++++++++++
 2 files changed, 43 insertions(+), 28 deletions(-)

diff --git a/send-pack.c b/send-pack.c
index d671ab5d05..f227b7315e 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -244,7 +244,12 @@ static int check_to_send_update(const struct ref *ref, const struct send_pack_ar
 		return CHECK_REF_STATUS_REJECTED;
 	case REF_STATUS_UPTODATE:
 		return CHECK_REF_UPTODATE;
+
 	default:
+	case REF_STATUS_EXPECTING_REPORT:
+		/* already passed checks on the local side */
+	case REF_STATUS_OK:
+		/* of course this is OK */
 		return 0;
 	}
 }
@@ -447,13 +452,6 @@ int send_pack(struct send_pack_args *args,
 		if (ref->deletion && !allow_deleting_refs)
 			ref->status = REF_STATUS_REJECT_NODELETE;
 
-	if (!args->dry_run)
-		advertise_shallow_grafts_buf(&req_buf);
-
-	if (!args->dry_run && push_cert_nonce)
-		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
-					       cap_buf.buf, push_cert_nonce);
-
 	/*
 	 * Clear the status for each ref and see if we need to send
 	 * the pack data.
@@ -489,31 +487,35 @@ int send_pack(struct send_pack_args *args,
 			ref->status = REF_STATUS_EXPECTING_REPORT;
 	}
 
+	if (!args->dry_run)
+		advertise_shallow_grafts_buf(&req_buf);
+
 	/*
 	 * Finally, tell the other end!
 	 */
-	for (ref = remote_refs; ref; ref = ref->next) {
-		char *old_hex, *new_hex;
-
-		if (args->dry_run || push_cert_nonce)
-			continue;
-
-		if (check_to_send_update(ref, args) < 0)
-			continue;
-
-		old_hex = oid_to_hex(&ref->old_oid);
-		new_hex = oid_to_hex(&ref->new_oid);
-		if (!cmds_sent) {
-			packet_buf_write(&req_buf,
-					 "%s %s %s%c%s",
-					 old_hex, new_hex, ref->name, 0,
-					 cap_buf.buf);
-			cmds_sent = 1;
-		} else {
-			packet_buf_write(&req_buf, "%s %s %s",
-					 old_hex, new_hex, ref->name);
+	if (!args->dry_run && push_cert_nonce)
+		cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
+					       cap_buf.buf, push_cert_nonce);
+	else if (!args->dry_run)
+		for (ref = remote_refs; ref; ref = ref->next) {
+			char *old_hex, *new_hex;
+
+			if (check_to_send_update(ref, args) < 0)
+				continue;
+
+			old_hex = oid_to_hex(&ref->old_oid);
+			new_hex = oid_to_hex(&ref->new_oid);
+			if (!cmds_sent) {
+				packet_buf_write(&req_buf,
+						 "%s %s %s%c%s",
+						 old_hex, new_hex, ref->name, 0,
+						 cap_buf.buf);
+				cmds_sent = 1;
+			} else {
+				packet_buf_write(&req_buf, "%s %s %s",
+						 old_hex, new_hex, ref->name);
+			}
 		}
-	}
 
 	if (use_push_options) {
 		struct string_list_item *item;
diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
index 030331f1c5..d1cb6aa9ee 100755
--- a/t/t5534-push-signed.sh
+++ b/t/t5534-push-signed.sh
@@ -273,4 +273,17 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
 	test_cmp expect dst/push-cert-status
 '
 
+test_expect_success GPG 'failed atomic push does not execute GPG' '
+	prepare_dst &&
+	git -C dst config receive.certnonceseed sekrit &&
+	write_script gpg <<-EOF &&
+	# should check atomic push locally before running GPG.
+	exit 1
+	EOF
+	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push \
+			--signed --atomic --porcelain \
+			dst noop ff noff >out 2>&1 &&
+	test_i18ngrep ! "gpg failed to sign" out 
+'
+
 test_done
-- 
2.28.0

Re: [PATCH 2/2] send-pack: check atomic push before running GPG

[韩欣(炽天)]

在 2020/9/16 下午12:37, Junio C Hamano 写道:
> Jiang Xin <worldhello.net@gmail.com> writes:
>
>>>> -
>>>> -     if (!args->dry_run && push_cert_nonce)
>>>> -             cmds_sent = generate_push_cert(&req_buf, remote_refs, args,
>>>> -                                            cap_buf.buf, push_cert_nonce);
>>>> -
>>>>        /*
>>>>         * Clear the status for each ref and see if we need to send
>>>>         * the pack data.
>>> This "Clear the status for each ref" worries me.
>>>
>>> The generate_push_cert() function RELIES on ref->status and filters
>>> out the ref that failed to pass the local check from the generated
>>> push certificate.  If you let the loop (post context of this hunk)
>>> run, ref->status will be updated by it, so the net effect of this
>>> patch is that it breaks "non-atomic" case that pushes multiple refs
>>> and one of ref fails to pass the local check.
>>>
>>> IOW, generate_push_cert() MUST be called before this loop "clears
>>> the status for each ref" by assigning to ref->status.
>> The next block ("Finally, tell the other end!") is what we send
>> commands to "receive-pack", right after some of the status are reset
>> to REF_STATUS_OK or REF_STATUS_EXPECTING_REPORT by this chunk of code.
>> So moving the generate_push_cert() part right before the "Finally,
>> tell the other end!" part LGTM.
> Sorry, I do not follow.  The loop in question is the one before
> "Finally tell the other end".  The loop ends like so:
>
> 	for (ref = remote_refs; ref; ref = ref->next) {
> 		...
> 		if (args->dry_run || !status_report)
> 			ref->status = REF_STATUS_OK;
> 		else
> 			ref->status = REF_STATUS_EXPECTING_REPORT;
> 	}
>
> and the patch moves a call to generate_push_cert() that looks at
> remote_refs _after_ this loop, but generate_push_cert() function
> uses a loop over remote_refs that uses check_to_send_update(), which
> looks at ref->status's value to decide what to do.  Its correct
> operation relies on ref->status NOT updated by the above loop.
>
> The loop prepares the status field so that we can then read and
> record the response against each ref updates from the other side.
>
> The ref->status field is set to EXPECTING_REPORT, later to be
> updated to REF_STATUS_OK or REF_STATUS_REMOTE_REJECT.  We can
> clobber the original value of ref->status at this point only because
> the loop depends on the fact that no check_to_send_update() call
> will happen after the loop (because the ref->status field the
> helper's operation depends on is already reset for the next phase of
> operation).  The patch that moves generate_push_cert() call below
> the loop, whether it is before or after the "Finally tell the other
> end" loop, is therefore fundamentally broken, isn't it?
>
> I do not think it would introduce such breakage if we teach
> generate_push_cert() to pay attention to the atomicity, and that can
> be done without reordering the calls in send_pack() to break the
> control flow.

Thank you for your reply. These loops here really confuse me at first.

But I found that the main effect of "Clear the status for each ref and
see if we need to send the pack data" is to help us do a pre-check on
the client side whether the push should be rejected. When the reference
should be pushed, whether the status was changed to REF_STATUS_OK or
REF_STATUS_EXPECTING_REPORT, it does not seem to affect the result of
function generate_push_cert(). check_to_send_update() in
generate_push_cert() only filters out references that needn't to be pushed.

Just like brian m. carlson said, "that would be a nice change; after
all, the user's key may involve a smartcard or a passphrase and avoiding
needless hassle for the user would be desirable". It increase the
perforcemance a little bit for failed atomic push and make it clear that
client side requirements and the other side requirements.

If there is something wrong with my understanding, I am very grateful
\that you can help me point out the problems.

Re: [PATCH 1/2] t5534: new test case for atomic signed push

[Junio C Hamano]

Han Xin <chiyutianyi@gmail.com> writes:

> In order to test signed atomic push, add a new test case.
>
> Reviewed-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
> Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
> ---

Thanks, but nowhere in the above it does not say what is being
tested.  By looking at 2/2 (by the way, these should be a single
atomic patch, not a "failure turns into success", as it is not even
a bug fix), readers may be able to guess that you want to enforce
that with even broken implementation of GPG, an immediate failure to
push one of the refs will be noticed by looking at their refs, but
it is unclear why that is even desirable---if you combine the two
patches, you may have a better place to argue why it is a good idea,
but a test-only patch makes it even less clear why the new behavior
expected by this test is desirable.

>  t/t5534-push-signed.sh | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh
> index 030331f1c5..d0fcdc900e 100755
> --- a/t/t5534-push-signed.sh
> +++ b/t/t5534-push-signed.sh
> @@ -273,4 +273,21 @@ test_expect_success GPGSM 'fail without key and heed user.signingkey x509' '
>  	test_cmp expect dst/push-cert-status
>  '
>  
> +test_expect_failure GPG 'check atomic push before running GPG' '
> +	prepare_dst &&
> +	git -C dst config receive.certnonceseed sekrit &&
> +	write_script gpg <<-EOF &&
> +	echo >&2 "Fake gpg is called."
> +	exit 1
> +	EOF
> +	test_must_fail env PATH="$TRASH_DIRECTORY:$PATH" git push --signed --atomic \
> +			dst noop ff noff >out 2>&1 &&
> +	grep "^error:" out >actual &&
> +	cat >expect <<-EOF &&
> +	error: atomic push failed for ref refs/heads/noff. status: 2
> +	error: failed to push some refs to '"'"'dst'"'"'
> +	EOF
> +	test_i18ncmp expect actual
> +'
> +
>  test_done

Re: [PATCH 1/2] t5534: new test case for atomic signed push

[brian m. carlson]

[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]

On 2020-09-15 at 20:31:38, Junio C Hamano wrote:
> Han Xin <chiyutianyi@gmail.com> writes:
> 
> > In order to test signed atomic push, add a new test case.
> >
> > Reviewed-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
> > Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
> > ---
> 
> Thanks, but nowhere in the above it does not say what is being
> tested.  By looking at 2/2 (by the way, these should be a single
> atomic patch, not a "failure turns into success", as it is not even
> a bug fix), readers may be able to guess that you want to enforce
> that with even broken implementation of GPG, an immediate failure to
> push one of the refs will be noticed by looking at their refs, but
> it is unclear why that is even desirable---if you combine the two
> patches, you may have a better place to argue why it is a good idea,
> but a test-only patch makes it even less clear why the new behavior
> expected by this test is desirable.

Yeah, I find myself a little confused by this, and I think maybe a more
verbose commit message could be valuable in clearing that up.  I think
what this series is trying to do is check that if we can tell on the
client side that the push will be rejected, then not to invoke GnuPG to
generate the push certificate.

If so, that would be a nice change; after all, the user's key may
involve a smartcard or a passphrase and avoiding needless hassle for the
user would be desirable.  But even after reading the series, it's not
clear to me that that _is_ what the goal is here or that this is
necessarily the best way of going about it.  Telling us more about the
reason for the patch would help us understand the change and why it's
valuable better.
-- 
brian m. carlson: Houston, Texas, US

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

Re: [PATCH 1/2] t5534: new test case for atomic signed push

[Junio C Hamano]

Han Xin <chiyutianyi@gmail.com> writes:

> +	cat >expect <<-EOF &&
> +	error: atomic push failed for ref refs/heads/noff. status: 2
> +	error: failed to push some refs to '"'"'dst'"'"'
> +	EOF
> +	test_i18ncmp expect actual

Another thing I forgot to say.  This expects the exact phrasing of
error message to stay the same, which is not really desirable.  We
might want to start quoting `refs/heads/noff` in the message like
other messages often do, for example, and this test will have to
match.

If you expect that the failure is not due to GPG (i.e. the updated
code in 2/2 wants to fail before asking GPG to do anything), why
not grep for what your "Fake gpg" says in the error output and make
sure that message does not appear?  That would make this test a lot
more robust, I suspect.



> +'
> +
>  test_done