git@vger.kernel.org list mirror (unofficial, one of many)
 help / color / mirror / code / Atom feed
* [PATCH 1/4] git-bisect-lk2009: make continuation of list indented
@ 2020-10-08 20:23 Jean-Noël Avila
  2020-10-08 20:23 ` [PATCH 2/4] doc: use linkgit macro where needed Jean-Noël Avila
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Jean-Noël Avila @ 2020-10-08 20:23 UTC (permalink / raw)
  To: git; +Cc: Jean-Noël Avila

That's clearer asciidoc formatting.

Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
---
 Documentation/git-bisect-lk2009.txt | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt
index 3ba49e85b7..f3d9566c89 100644
--- a/Documentation/git-bisect-lk2009.txt
+++ b/Documentation/git-bisect-lk2009.txt
@@ -473,7 +473,7 @@ Z-Z
 -------------
 
 2) starting from the "good" ends of the graph, associate to each
-commit the number of ancestors it has plus one
+   commit the number of ancestors it has plus one
 
 For example with the following graph where H is the "bad" commit and A
 and D are some parents of some "good" commits:
@@ -514,7 +514,7 @@ D---E
 -------------
 
 4) the best bisection point is the commit with the highest associated
-number
+   number
 
 So in the above example the best bisection point is commit C.
 
@@ -580,8 +580,8 @@ good or a bad commit does not give more or less information).
 
 Let's also suppose that we have a cleaned up graph like one after step
 1) in the bisection algorithm above. This means that we can measure
-the information we get in terms of number of commit we can remove from
-the graph..
+   the information we get in terms of number of commit we can remove
+   from the graph..
 
 And let's take a commit X in the graph.
 
@@ -689,18 +689,18 @@ roughly the following steps:
 6) sort the commit by decreasing associated value
 
 7) if the first commit has not been skipped, we can return it and stop
-here
+   here
 
 8) otherwise filter out all the skipped commits in the sorted list
 
 9) use a pseudo random number generator (PRNG) to generate a random
-number between 0 and 1
+   number between 0 and 1
 
 10) multiply this random number with its square root to bias it toward
-0
+    0
 
 11) multiply the result by the number of commits in the filtered list
-to get an index into this list
+    to get an index into this list
 
 12) return the commit at the computed index
 
-- 
2.28.0.rc0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/4] doc: use linkgit macro where needed.
  2020-10-08 20:23 [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Jean-Noël Avila
@ 2020-10-08 20:23 ` Jean-Noël Avila
  2020-10-08 20:23 ` [PATCH 3/4] doc: git-remote fix ups Jean-Noël Avila
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Noël Avila @ 2020-10-08 20:23 UTC (permalink / raw)
  To: git; +Cc: Jean-Noël Avila

Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
---
 Documentation/git-grep.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt
index a7f9bc99ea..6077ff01a4 100644
--- a/Documentation/git-grep.txt
+++ b/Documentation/git-grep.txt
@@ -209,7 +209,7 @@ providing this option will cause it to die.
 	Use \0 as the delimiter for pathnames in the output, and print
 	them verbatim. Without this option, pathnames with "unusual"
 	characters are quoted as explained for the configuration
-	variable core.quotePath (see git-config(1)).
+	variable core.quotePath (see linkgit:git-config[1]).
 
 -o::
 --only-matching::
-- 
2.28.0.rc0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 3/4] doc: git-remote fix ups
  2020-10-08 20:23 [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Jean-Noël Avila
  2020-10-08 20:23 ` [PATCH 2/4] doc: use linkgit macro where needed Jean-Noël Avila
@ 2020-10-08 20:23 ` Jean-Noël Avila
  2020-10-08 20:23 ` [PATCH 4/4] doc: fix the bnf like style of some commands Jean-Noël Avila
  2020-10-08 21:01 ` [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Junio C Hamano
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Noël Avila @ 2020-10-08 20:23 UTC (permalink / raw)
  To: git; +Cc: Jean-Noël Avila

Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
---
 Documentation/git-remote.txt | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt
index 9659abbf8e..ea73386c81 100644
--- a/Documentation/git-remote.txt
+++ b/Documentation/git-remote.txt
@@ -10,7 +10,7 @@ SYNOPSIS
 --------
 [verse]
 'git remote' [-v | --verbose]
-'git remote add' [-t <branch>] [-m <master>] [-f] [--[no-]tags] [--mirror=<fetch|push>] <name> <url>
+'git remote add' [-t <branch>] [-m <master>] [-f] [--[no-]tags] [--mirror=(fetch|push)] <name> <url>
 'git remote rename' <old> <new>
 'git remote remove' <name>
 'git remote set-head' <name> (-a | --auto | -d | --delete | <branch>)
@@ -35,7 +35,7 @@ OPTIONS
 -v::
 --verbose::
 	Be a little more verbose and show remote url after name.
-	NOTE: This must be placed between `remote` and `subcommand`.
+	NOTE: This must be placed between `remote` and subcommand.
 
 
 COMMANDS
@@ -46,7 +46,7 @@ subcommands are available to perform operations on the remotes.
 
 'add'::
 
-Adds a remote named <name> for the repository at
+Add a remote named <name> for the repository at
 <url>.  The command `git fetch <name>` can then be used to create and
 update remote-tracking branches <name>/<branch>.
 +
@@ -109,13 +109,13 @@ With `-d` or `--delete`, the symbolic ref `refs/remotes/<name>/HEAD` is deleted.
 +
 With `-a` or `--auto`, the remote is queried to determine its `HEAD`, then the
 symbolic-ref `refs/remotes/<name>/HEAD` is set to the same branch. e.g., if the remote
-`HEAD` is pointed at `next`, "`git remote set-head origin -a`" will set
+`HEAD` is pointed at `next`, `git remote set-head origin -a` will set
 the symbolic-ref `refs/remotes/origin/HEAD` to `refs/remotes/origin/next`. This will
 only work if `refs/remotes/origin/next` already exists; if not it must be
 fetched first.
 +
-Use `<branch>` to set the symbolic-ref `refs/remotes/<name>/HEAD` explicitly. e.g., "git
-remote set-head origin master" will set the symbolic-ref `refs/remotes/origin/HEAD` to
+Use `<branch>` to set the symbolic-ref `refs/remotes/<name>/HEAD` explicitly. e.g., `git
+remote set-head origin master` will set the symbolic-ref `refs/remotes/origin/HEAD` to
 `refs/remotes/origin/master`. This will only work if
 `refs/remotes/origin/master` already exists; if not it must be fetched first.
 +
@@ -127,7 +127,7 @@ This can be used to track a subset of the available remote branches
 after the initial setup for a remote.
 +
 The named branches will be interpreted as if specified with the
-`-t` option on the 'git remote add' command line.
+`-t` option on the `git remote add` command line.
 +
 With `--add`, instead of replacing the list of currently tracked
 branches, adds to that list.
@@ -181,16 +181,16 @@ fetch --prune <name>`, except that no new references will be fetched.
 See the PRUNING section of linkgit:git-fetch[1] for what it'll prune
 depending on various configuration.
 +
-With `--dry-run` option, report what branches will be pruned, but do not
+With `--dry-run` option, report what branches would be pruned, but do not
 actually prune them.
 
 'update'::
 
 Fetch updates for remotes or remote groups in the repository as defined by
-remotes.<group>.  If neither group nor remote is specified on the command line,
+`remotes.<group>`. If neither group nor remote is specified on the command line,
 the configuration parameter remotes.default will be used; if
 remotes.default is not defined, all remotes which do not have the
-configuration parameter remote.<name>.skipDefaultUpdate set to true will
+configuration parameter `remote.<name>.skipDefaultUpdate` set to true will
 be updated.  (See linkgit:git-config[1]).
 +
 With `--prune` option, run pruning against all the remotes that are updated.
-- 
2.28.0.rc0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 4/4] doc: fix the bnf like style of some commands
  2020-10-08 20:23 [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Jean-Noël Avila
  2020-10-08 20:23 ` [PATCH 2/4] doc: use linkgit macro where needed Jean-Noël Avila
  2020-10-08 20:23 ` [PATCH 3/4] doc: git-remote fix ups Jean-Noël Avila
@ 2020-10-08 20:23 ` Jean-Noël Avila
  2020-10-08 21:01 ` [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Junio C Hamano
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Noël Avila @ 2020-10-08 20:23 UTC (permalink / raw)
  To: git; +Cc: Jean-Noël Avila

In command line options, variables are entered between < and >

Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
---
 Documentation/git-init.txt  | 2 +-
 builtin/submodule--helper.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt
index f35f70f13d..59ecda6c17 100644
--- a/Documentation/git-init.txt
+++ b/Documentation/git-init.txt
@@ -70,7 +70,7 @@ repository.
 +
 If this is reinitialization, the repository will be moved to the specified path.
 
--b <branch-name::
+-b <branch-name>::
 --initial-branch=<branch-name>::
 
 Use the specified name for the initial branch in the newly created repository.
diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c
index de5ad73bb8..c30896c897 100644
--- a/builtin/submodule--helper.c
+++ b/builtin/submodule--helper.c
@@ -1308,7 +1308,7 @@ static int module_summary(int argc, const char **argv, const char *prefix)
 	};
 
 	const char *const git_submodule_helper_usage[] = {
-		N_("git submodule--helper summary [<options>] [commit] [--] [<path>]"),
+		N_("git submodule--helper summary [<options>] [<commit>] [--] [<path>]"),
 		NULL
 	};
 
-- 
2.28.0.rc0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/4] git-bisect-lk2009: make continuation of list indented
  2020-10-08 20:23 [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Jean-Noël Avila
                   ` (2 preceding siblings ...)
  2020-10-08 20:23 ` [PATCH 4/4] doc: fix the bnf like style of some commands Jean-Noël Avila
@ 2020-10-08 21:01 ` Junio C Hamano
  3 siblings, 0 replies; 5+ messages in thread
From: Junio C Hamano @ 2020-10-08 21:01 UTC (permalink / raw)
  To: Jean-Noël Avila; +Cc: git

All four patches looked quite sensible.  Thanks, queueud.

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-10-08 21:02 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-08 20:23 [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Jean-Noël Avila
2020-10-08 20:23 ` [PATCH 2/4] doc: use linkgit macro where needed Jean-Noël Avila
2020-10-08 20:23 ` [PATCH 3/4] doc: git-remote fix ups Jean-Noël Avila
2020-10-08 20:23 ` [PATCH 4/4] doc: fix the bnf like style of some commands Jean-Noël Avila
2020-10-08 21:01 ` [PATCH 1/4] git-bisect-lk2009: make continuation of list indented Junio C Hamano

Code repositories for project(s) associated with this inbox:

	https://80x24.org/mirrors/git.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).