From: "Elijah Newren via GitGitGadget" <gitgitgadget@gmail.com>
To: git@vger.kernel.org
Cc: Phillip Wood <phillip.wood123@gmail.com>,
Taylor Blau <me@ttaylorr.com>, Elijah Newren <newren@gmail.com>,
Elijah Newren <newren@gmail.com>
Subject: [PATCH v2 0/3] Make test selection easier by specifying description substrings instead of just numeric counters
Date: Tue, 13 Oct 2020 19:19:43 +0000 [thread overview]
Message-ID: <pull.878.v2.git.git.1602616786.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.878.git.git.1602545164.gitgitgadget@gmail.com>
This patch series enables me to change
./t9999-my-test.sh --run=1-3,5,17,19
into
./t9999-my-test.sh --run=setup,rename,symlink
and have it pick out tests with "setup", "rename", or "symlink" in their
description and run those. Saves me a lot of time, especially since numbers
for tests aren't readily accessible. The easiest way for me to get the
numbers corresponding to the tests I want to run, is to run all the tests
and look at the output to match up the descriptions with their numbers --
thus defeating the point of selecting just a subset of the tests to run in
the first place.
Changes since v1:
* Modified the documentation slightly to combine a separate sentence into
the previous paragraph and avoid confusion around whether negation
applies to substring selections (pointed out by Taylor)
* Simplified the output for skipped tests even further, as suggested by
Taylor.
Elijah Newren (3):
test-lib: allow selecting tests by substring/regex with --run
t6006, t6012: adjust tests to use 'setup' instead of synonyms
test-lib: reduce verbosity of skipped tests
t/README | 29 ++++++++++++++++---------
t/t0000-basic.sh | 41 ++++++++++++++++++++++--------------
t/t6006-rev-list-format.sh | 2 +-
t/t6012-rev-list-simplify.sh | 2 +-
t/test-lib.sh | 14 ++++++------
5 files changed, 53 insertions(+), 35 deletions(-)
base-commit: d98273ba77e1ab9ec755576bc86c716a97bf59d7
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-git-878%2Fnewren%2Ftest-selection-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-git-878/newren/test-selection-v2
Pull-Request: https://github.com/git/git/pull/878
Range-diff vs v1:
1: 46fce3a844 ! 1: 41e2528e83 test-lib: allow selecting tests by substring/regex with --run
@@ t/README: For an individual test suite --run could be used to specify that
-been included. You may omit the first or the second number to
-mean "from the first test" or "up to the very last test"
-respectively.
+-
+-Optional prefix of '!' means that the test or a range of tests
+-should be excluded from the run.
+The argument for --run, <test-selector>, is a list of description
+substrings or regexes or individual test numbers or ranges with an
-+optional negation prefix that define what tests in a test suite to
-+include in the run. A range is two numbers separated with a dash and
-+matches a range of tests with both ends been included. You may omit
-+the first or the second number to mean "from the first test" or "up to
-+the very last test" respectively.
++optional negation prefix (of '!') that define what tests in a test
++suite to include (or exclude, if negated) in the run. A range is two
++numbers separated with a dash and matches a range of tests with both
++ends been included. You may omit the first or the second number to
++mean "from the first test" or "up to the very last test" respectively.
- Optional prefix of '!' means that the test or a range of tests
- should be excluded from the run.
+ If --run starts with an unprefixed number or range the initial
+ set of tests to run is empty. If the first item starts with '!'
@@ t/README: test in the test suite except from 7 up to 11:
$ sh ./t9200-git-cvsexport-commit.sh --run='!7-11'
2: d1d73400e8 = 2: 8f1a4420f4 t6006, t6012: adjust tests to use 'setup' instead of synonyms
3: bb2317972a ! 3: 85a4ca164a test-lib: reduce verbosity of skipped tests
@@ t/test-lib.sh: test_skip () {
fi
- say_color skip >&3 "skipping test: $@"
-+ say_color skip >&3 "skipping test: $1"
say_color skip "ok $test_count # skip $1 ($skipped_reason)"
: true
;;
--
gitgitgadget
next prev parent reply other threads:[~2020-10-13 19:19 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-12 23:26 [PATCH 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Elijah Newren via GitGitGadget
2020-10-12 23:26 ` [PATCH 1/3] test-lib: allow selecting tests by substring/regex with --run Elijah Newren via GitGitGadget
2020-10-13 15:39 ` Taylor Blau
2020-10-13 17:23 ` Elijah Newren
2020-10-13 17:28 ` Taylor Blau
2020-10-13 18:21 ` Elijah Newren
2020-10-12 23:26 ` [PATCH 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-12 23:26 ` [PATCH 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-13 15:44 ` Taylor Blau
2020-10-13 17:56 ` Elijah Newren
2020-10-13 19:27 ` Junio C Hamano
2020-10-13 13:08 ` [PATCH 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Phillip Wood
2020-10-15 11:48 ` Johannes Schindelin
2020-10-15 13:42 ` Phillip Wood
2020-10-13 19:19 ` Elijah Newren via GitGitGadget [this message]
2020-10-13 19:19 ` [PATCH v2 1/3] test-lib: allow selecting tests by substring/regex with --run Elijah Newren via GitGitGadget
2020-10-14 17:04 ` Jeff King
2020-10-14 17:46 ` Junio C Hamano
2020-10-14 18:07 ` Jeff King
2020-10-14 19:24 ` Junio C Hamano
2020-10-14 19:41 ` Elijah Newren
2020-10-14 19:49 ` Jeff King
2020-10-15 16:09 ` Junio C Hamano
2020-10-15 15:59 ` Junio C Hamano
2020-10-14 17:50 ` Elijah Newren
2020-10-14 17:57 ` Junio C Hamano
2020-10-14 19:12 ` Elijah Newren
2020-10-15 16:10 ` Junio C Hamano
2020-10-14 18:09 ` Jeff King
2020-10-14 19:02 ` Elijah Newren
2020-10-15 16:20 ` Junio C Hamano
2020-10-15 19:46 ` Jeff King
2020-10-15 20:08 ` Junio C Hamano
2020-10-16 0:38 ` Jeff King
2020-10-16 16:16 ` Junio C Hamano
2020-10-16 16:30 ` Junio C Hamano
2020-10-16 20:06 ` Jeff King
2020-10-16 20:22 ` Junio C Hamano
2020-10-13 19:19 ` [PATCH v2 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-13 19:19 ` [PATCH v2 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-14 16:53 ` Jeff King
2020-10-14 17:39 ` Elijah Newren
2020-10-14 17:55 ` Jeff King
2020-10-14 17:57 ` Elijah Newren
2020-10-13 19:49 ` [PATCH v2 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Taylor Blau
2020-10-14 21:13 ` [PATCH v3 " Elijah Newren via GitGitGadget
2020-10-14 21:13 ` [PATCH v3 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-16 11:40 ` Phillip Wood
2020-10-16 17:27 ` Elijah Newren
2020-10-16 18:24 ` Phillip Wood
2020-10-16 20:02 ` Junio C Hamano
2020-10-16 20:07 ` Jeff King
2020-10-14 21:13 ` [PATCH v3 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-14 21:13 ` [PATCH v3 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-15 19:48 ` [PATCH v3 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Jeff King
2020-10-16 19:28 ` [PATCH v4 " Elijah Newren via GitGitGadget
2020-10-16 19:28 ` [PATCH v4 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-16 19:28 ` [PATCH v4 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-16 19:28 ` [PATCH v4 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-16 20:25 ` [PATCH v4 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Junio C Hamano
2020-10-16 20:56 ` Elijah Newren
2020-10-16 22:50 ` [PATCH v5 " Elijah Newren via GitGitGadget
2020-10-16 22:50 ` [PATCH v5 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-16 23:25 ` Andrei Rybak
2020-10-17 23:43 ` Elijah Newren
2020-10-16 22:50 ` [PATCH v5 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-16 22:50 ` [PATCH v5 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-18 0:23 ` [PATCH v6 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Elijah Newren via GitGitGadget
2020-10-18 0:23 ` [PATCH v6 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-18 0:23 ` [PATCH v6 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-18 0:23 ` [PATCH v6 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pull.878.v2.git.git.1602616786.gitgitgadget@gmail.com \
--to=gitgitgadget@gmail.com \
--cc=git@vger.kernel.org \
--cc=me@ttaylorr.com \
--cc=newren@gmail.com \
--cc=phillip.wood123@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).