From: Siddharth Asthana <siddharthasthana31@gmail.com>
To: John Cai <johncai86@gmail.com>
Cc: git@vger.kernel.org, christian.couder@gmail.com, gitster@pobox.com
Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options
Date: Fri, 21 Oct 2022 16:02:53 +0530 [thread overview]
Message-ID: <ad579a6c-8a3b-c226-54e4-b8bcef4930ac@gmail.com> (raw)
In-Reply-To: <750BA887-BECB-471D-8BB2-0B321778F376@gmail.com>
On 26/09/22 19:41, John Cai wrote:
> Hi Siddarth,
>
> On 26 Sep 2022, at 5:14, Siddharth Asthana wrote:
>
>> The command git cat-file can now use the mailmap mechanism to replace
>> idents with their canonical versions for commit and tag objects. There
>> are several options like `--batch`, `--batch-check` and
>> `--batch-command` that can be combined with `--use-mailmap`. But, the
>> documentation for `--batch`, `--batch-check` and `--batch-command`
>> doesn't say so. This patch fixes that documentation.
>>
>> Mentored-by: Christian Couder <christian.couder@gmail.com>
>> Mentored-by: John Cai <johncai86@gmail.com>
>> Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
>> ---
>>
>> This patch was previously sent as the first patch of a 3 patch series for
>> adding the mailmap support in git cat-file options:
>> https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/
>>
>> Changes in v2:
>> - Fixed the names in trailers in the commit message
>> - Updated the documentation to clearly state that the `--batch-check`,
>> `--batch-command` and `--batch` options can only be used with
>> `--textconv`, `--filters` or `--use-mailmap`.
>> - Fixed formating
>>
>> Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++----------
>> 1 file changed, 32 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt
>> index ec30b5c574..2a8f050a29 100644
>> --- a/Documentation/git-cat-file.txt
>> +++ b/Documentation/git-cat-file.txt
>> @@ -89,26 +89,45 @@ OPTIONS
>> --batch::
>> --batch=<format>::
>> Print object information and contents for each object provided
>> - on stdin. May not be combined with any other options or arguments
>> - except `--textconv` or `--filters`, in which case the input lines
>> - also need to specify the path, separated by whitespace. See the
>> - section `BATCH OUTPUT` below for details.
>> + on stdin. May not be combined with any other options or arguments
>> + except --textconv, --filters or --use-mailmap.
>
> except --textconv, --filters, or --use-mailmap.
>
>> + +
>> + * When used with `--textconv` or `--filters`, the input lines
>> + must specify the path, separated by whitespace. See the section
>> + `BATCH OUTPUT` below for details.
>> + +
>> + * When used with `--use-mailmap`, the info command shows the size
>> + the object, if the idents recorded in it were the ones "corrected"
>> + by the mailmap mechanism.
>
> When used with `--use-mailmap`, the info command shows the size
> the object if the identities recorded in it were replaced
> by the mailmap mechanism.
>
>>
>> --batch-check::
>> --batch-check=<format>::
>> - Print object information for each object provided on stdin. May
>> - not be combined with any other options or arguments except
>> - `--textconv` or `--filters`, in which case the input lines also
>> - need to specify the path, separated by whitespace. See the
>> - section `BATCH OUTPUT` below for details.
>> + Print object information for each object provided on stdin. May not be
>> + combined with any other options or arguments except --textconv, --filters
>> + or --use-mailmap.
>> + +
>> + * When used with `--textconv` or `--filters`, the input lines must
>> + specify the path, separated by whitespace. See the section
>> + `BATCH OUTPUT` below for details.
>> + +
>> + * When used with `--use-mailmap`, the info command shows the size
>> + the object, if the idents recorded in it were the ones "corrected"
>> + by the mailmap mechanism.
>
> Same as above
>
>> --batch-command::
>> --batch-command=<format>::
>> Enter a command mode that reads commands and arguments from stdin. May
>> - only be combined with `--buffer`, `--textconv` or `--filters`. In the
>> - case of `--textconv` or `--filters`, the input lines also need to specify
>> - the path, separated by whitespace. See the section `BATCH OUTPUT` below
>> - for details.
>> + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or
>> + `--filters`.
>> + +
>> + * When used with `--textconv` or `--filters`, the input lines must
>> + specify the path, separated by whitespace. See the section
>> + `BATCH OUTPUT` below for details.
>> + +
>> + * When used with `--use-mailmap`, the info command shows the size the
>> + object, if the idents recorded in it were the ones "corrected" by the
>> + mailmap mechanism.
>
> Same as above
>
>> +
>> +
>> `--batch-command` recognizes the following commands:
>> +
>> --
>> 2.38.0.rc1.4.g29ac4cf309.dirty
>
> thanks!
Thanks a lot for the review John! Will make the suggested changes and
send the v3 patch.
next prev parent reply other threads:[~2022-10-21 10:33 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-23 19:35 [PATCH] doc/cat-file: allow --use-mailmap for --batch options Siddharth Asthana
2022-09-24 14:49 ` Christian Couder
2022-09-26 9:14 ` Siddharth Asthana
2022-09-26 14:11 ` John Cai
2022-10-21 10:32 ` Siddharth Asthana [this message]
2022-10-21 10:34 ` Siddharth Asthana
2022-10-21 18:56 ` Junio C Hamano
2022-10-29 9:25 ` Siddharth Asthana
2022-10-29 18:06 ` Taylor Blau
2022-10-30 7:06 ` Christian Couder
2022-10-30 18:07 ` Taylor Blau
2022-10-31 10:54 ` Christian Couder
2022-11-13 21:26 ` Siddharth Asthana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ad579a6c-8a3b-c226-54e4-b8bcef4930ac@gmail.com \
--to=siddharthasthana31@gmail.com \
--cc=christian.couder@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=johncai86@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).