git@vger.kernel.org mailing list mirror (one of many)
 help / color / mirror / code / Atom feed
From: Jeff King <peff@peff.net>
To: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
Cc: "Felipe Contreras" <felipe.contreras@gmail.com>,
	git@vger.kernel.org, "Junio C Hamano" <gitster@pobox.com>,
	"Carlo Marcelo Arenas Belón" <carenas@gmail.com>,
	"John Keeping" <john@keeping.me.uk>,
	"Johannes Schindelin" <Johannes.Schindelin@gmx.de>
Subject: Re: [PATCH] test: fix for TEST_OUTPUT_DIRECTORY
Date: Tue, 15 Jun 2021 07:10:14 -0400	[thread overview]
Message-ID: <YMiKlmY3B/1cDrr8@coredump.intra.peff.net> (raw)
In-Reply-To: <87r1h4z8k0.fsf@evledraar.gmail.com>

On Mon, Jun 14, 2021 at 06:55:03PM +0200, Ævar Arnfjörð Bjarmason wrote:

> > Indeed. With Felipe's original patch, the "test" target (but not
> > "prove") in t/Makefile will report, whether you set
> > TEST_OUTPUT_DIRECTORY or not:
> >
> >   failed test(s): t1234 t2345
> >
> >   fixed   0
> >   success 23243
> >   failed  2
> >   broken  221
> >   total   23647
> >
> > though curiously it doesn't exit non-zero back to make (usually we'd
> > also see the failures from the individual make targets, and barf there).
> 
> Odd.

I think it's just that the aggregation script was never meant to signal
to "make". In a regular "make test" (not using prove), each individual
test script is a dependency than can fail on its own. That means a
failure of any of them will signal "make" to fail the overall operation.

Interestingly it means we will not run the "aggregate-results" at all in
that case, so we would not give the nice output (you can run "make
aggregate-results" yourself, though; it doesn't depend on the tests
running itself, but assumes you've already run them).

So arguably we could do something like this:

diff --git a/t/aggregate-results.sh b/t/aggregate-results.sh
index 7913e206ed..6198b2ef6b 100755
--- a/t/aggregate-results.sh
+++ b/t/aggregate-results.sh
@@ -44,3 +44,5 @@ printf "%-8s%d\n" success $success
 printf "%-8s%d\n" failed $failed
 printf "%-8s%d\n" broken $broken
 printf "%-8s%d\n" total $total
+
+test -z "$failed_tests"

but it makes "make aggregate-results" after the fact a little noisier. I
dunno. I don't really care that much about the output from this form of
the tests at all, since the "prove" output is _so_ much better, and I'd
highly recommend anybody use it instead.

The only thing preventing me from suggesting we get rid of the old
make-driven approach entirely is that there are probably platforms that
run the tests where "prove" is not available. And as long as it is not
generating wrong results (e.g., returning 0 when a test has failed), it
is doing that job OK.

> > I'm OK with this general approach. I do think it would be nice if we let
> > the environment supersede the on-disk GIT-BUILD-OPTIONS, which IMHO is
> > the real root of the problem (and possibly others), but that may be more
> > challenging to get right (I posted a patch earlier, but it does rely on
> > stuffing all of "set" into a variable, which makes me concerned some
> > less-able shells may complain).
> 
> Yeah I don't know and haven't dug into who wants all this combination of
> GIT-BUILD-OPTIONS, passing things in the env, or passing things as
> paramaters to make (sometimes under the same names).

To be clear, I doubt it's all that important. It would occasionally be
less surprising when trying to override the environment while running a
test script manually (which is after all, basically the same thing
that's happening here, just driven by a script). But if it's hard to do,
I'm OK with an easier solution provided it doesn't regress any other
cases.

> > It also means that t0000 can't test the results output (since we don't
> > write it), but I assume we don't do that now (I didn't actually try
> > running with your patch).
> 
> Yeah, but only in the trivial wrapper function, you can still write the
> test script and check the output yourself.

Sort of. You can avoid its setting of TEST_NO_RESULTS_OUTPUT, but we're
still left without a way to reliably override TEST_OUTPUT_DIRECTORY.
Again, I'm OK punting on that for now if there are no such tests.

> > We do look at them elsewhere, though (in --tee as you noted, and I think
> > for --stress). I'd prefer to notice the "no results" flag explicitly
> > there and report something sensible, rather than getting:
> 
> If we edit every single current callsite instead of setting it to
> something you can't write to then we're setting ourselves up for subtle
> bugss when someone uses $TEST_RESULTS_DIR for something else.

I was thinking we'd still set it to /dev/null as a belt-and-suspenders
(so the worst case is just an ugly error message). But...

> >   mkdir: cannot create directory ‘/dev/null’: Not a directory
> >
> > or similar.
> 
> Yeah that error sucks, but nobody will see it unless they're hacking on
> the guts of this $TEST_NO_RESULTS_OUTPUT, and I think it beats being fragile.

I think that's a good point. You're unlikely to stumble into
accidentally using TEST_NO_RESULTS_OUTPUT, so it might not be worth
caring about too much.

-Peff

  reply	other threads:[~2021-06-15 11:10 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-09 17:05 [PATCH] test: fix for TEST_OUTPUT_DIRECTORY Felipe Contreras
2021-06-13  4:42 ` Jeff King
2021-06-13 15:44   ` Felipe Contreras
2021-06-14  7:43     ` Jeff King
2021-06-14  8:39       ` Felipe Contreras
2021-06-14  9:33         ` Ævar Arnfjörð Bjarmason
2021-06-14 14:25           ` Jeff King
2021-06-14 16:55             ` Ævar Arnfjörð Bjarmason
2021-06-15 11:10               ` Jeff King [this message]
2021-06-15 11:21                 ` Bagas Sanjaya
2021-06-15 11:23                   ` Jeff King
2021-06-15 18:09                 ` Felipe Contreras
2021-06-15 17:45           ` Felipe Contreras

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: http://vger.kernel.org/majordomo-info.html

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMiKlmY3B/1cDrr8@coredump.intra.peff.net \
    --to=peff@peff.net \
    --cc=Johannes.Schindelin@gmx.de \
    --cc=avarab@gmail.com \
    --cc=carenas@gmail.com \
    --cc=felipe.contreras@gmail.com \
    --cc=git@vger.kernel.org \
    --cc=gitster@pobox.com \
    --cc=john@keeping.me.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
Code repositories for project(s) associated with this public inbox

	https://80x24.org/mirrors/git.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).