* [PATCH 0/1] git-p4: add format-patch subcommand
@ 2018-02-26 11:48 Luke Diamand
2018-02-26 11:48 ` [PATCH 1/1] " Luke Diamand
0 siblings, 1 reply; 5+ messages in thread
From: Luke Diamand @ 2018-02-26 11:48 UTC (permalink / raw)
To: git; +Cc: Lars Schneider, Miguel Torroja, George Vanburgh, Luke Diamand
This is an initial attempt to add a "format-patch" command
to git-p4, following on from the earlier discussion about
shelving.
It uses the "p4 describe" command to generate the diff content and
post-processes it enough to generate git-style patches. These
can be fed to tools such as patch, or "git am".
This is useful for "unshelving" a P4 changelist into your git tree,
since the usual git subcommands (sync, clone) cannot easily read
a shelved changelist: there is no good way to get from Perforce
a consistent single revision against which to generate a diff
using git fast-import, since Perforce doesn't have the concept of
a repo revision.
By default, it leaves the depot prefix in the patch, but using
the option "--strip-depot-prefix" makes it suitable for "git am".
Use it like this:
$ git p4 format-patch 12345 >out.patch
or
$ mkdir patches
$ git p4 format-patch --output patches 12345 12346
or
$ git p4 format-patch --strip-depot-prefix 12347 >out.patch
$ git am out.patch
Limitations of "p4 describe" mean that this will not work reliably
with binary files. There's no easy way around this. The change makes
a small attempt to at least stop on binary files, but in the case
of a file marked in P4 as "text", which contains binary deltas, the
file will unavoidably come out corrupted.
Luke Diamand (1):
git-p4: add format-patch subcommand
Documentation/git-p4.txt | 33 +++++
git-p4.py | 304 +++++++++++++++++++++++++++++++++++++++++++++--
t/t9832-make-patch.sh | 135 +++++++++++++++++++++
3 files changed, 462 insertions(+), 10 deletions(-)
create mode 100755 t/t9832-make-patch.sh
--
2.15.1.272.gc310869385
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/1] git-p4: add format-patch subcommand
2018-02-26 11:48 [PATCH 0/1] git-p4: add format-patch subcommand Luke Diamand
@ 2018-02-26 11:48 ` Luke Diamand
2018-02-26 23:29 ` Miguel Torroja
2018-02-26 23:48 ` Eric Sunshine
0 siblings, 2 replies; 5+ messages in thread
From: Luke Diamand @ 2018-02-26 11:48 UTC (permalink / raw)
To: git; +Cc: Lars Schneider, Miguel Torroja, George Vanburgh, Luke Diamand
It takes a list of P4 changelists and generates a patch for
each one, using "p4 describe".
This is especially useful for applying shelved changelists
to your git-p4 tree; the existing "git p4" subcommands do
not handle these.
That's because they "p4 print" the contents of each file at
a given revision, and then use git-fastimport to generate the
deltas. But in the case of a shelved changelist, there is no
easy way to find out what the previous file state was - Perforce
does not have the concept of a single repo-wide revision.
Unfortunately, using "p4 describe" comes with a price: it cannot
be used to reliably generate diffs for binary files (it tries to
linebreak on LF characters) and it is also _much_ slower.
Unicode character correctness is untested - in theory if
"p4 describe" knows about the character encoding it shouldn't
break unicode characters if they happen to contain LF, but I
haven't tested this.
Signed-off-by: Luke Diamand <luke@diamand.org>
---
Documentation/git-p4.txt | 33 +++++
git-p4.py | 304 +++++++++++++++++++++++++++++++++++++++++++++--
t/t9832-make-patch.sh | 135 +++++++++++++++++++++
3 files changed, 462 insertions(+), 10 deletions(-)
create mode 100755 t/t9832-make-patch.sh
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index d8c8f11c9f..1908b00de2 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -164,6 +164,28 @@ $ git p4 submit --shelve
$ git p4 submit --update-shelve 1234 --update-shelve 2345
----
+
+format-patch
+~~~~~~~~~~
+This will attempt to create a unified diff (using the git patch variant) which
+can be passed to patch. This is generated using the output from "p4 describe".
+
+It includes the contents of added files (which "p4 describe" does not).
+
+Binary files cannot be handled correctly due to limitations in "p4 describe".
+
+It will handle both normal and shelved (pending) changelists.
+
+Because of the way this works, it will be much slower than the normal git-p4 clone
+path.
+
+----
+$ git p4 format-patch 12345
+$ git p4 format-patch --output patchdir 12345 12346 12347
+$ git p4 format-patch --strip-depot-prefix 12348 > out.patch
+$ git am out.patch
+----
+
OPTIONS
-------
@@ -337,6 +359,17 @@ These options can be used to modify 'git p4 rebase' behavior.
--import-labels::
Import p4 labels.
+Format-patch options
+~~~~~~~~~~~~~~~~~~~~
+
+--output::
+ Write patches to this directory (which must exist) instead of to
+ standard output.
+
+--strip-depot-prefix::
+ Strip the depot prefix from filenames in the patch. This makes
+ it suitable for passing to tools such as "git am".
+
DEPOT PATH SYNTAX
-----------------
The p4 depot path argument to 'git p4 sync' and 'git p4 clone' can
diff --git a/git-p4.py b/git-p4.py
index 7bb9cadc69..a1e998e6f5 100755
--- a/git-p4.py
+++ b/git-p4.py
@@ -26,6 +26,7 @@ import zipfile
import zlib
import ctypes
import errno
+import time
try:
from subprocess import CalledProcessError
@@ -316,12 +317,17 @@ def p4_last_change():
results = p4CmdList(["changes", "-m", "1"], skip_info=True)
return int(results[0]['change'])
-def p4_describe(change):
+def p4_describe(change, shelved=False):
"""Make sure it returns a valid result by checking for
the presence of field "time". Return a dict of the
results."""
- ds = p4CmdList(["describe", "-s", str(change)], skip_info=True)
+ cmd = ["describe", "-s"]
+ if shelved:
+ cmd += ["-S"]
+ cmd += [str(change)]
+
+ ds = p4CmdList(cmd, skip_info=True)
if len(ds) != 1:
die("p4 describe -s %d did not return 1 result: %s" % (change, str(ds)))
@@ -372,7 +378,14 @@ def split_p4_type(p4type):
mods = ""
if len(s) > 1:
mods = s[1]
- return (base, mods)
+
+ git_mode = "100644"
+ if "x" in mods:
+ git_mode = "100755"
+ if base == "symlink":
+ git_mode = "120000"
+
+ return (base, mods, git_mode)
#
# return the raw p4 type of a file (text, text+ko, etc)
@@ -413,7 +426,7 @@ def p4_keywords_regexp_for_file(file):
if not os.path.exists(file):
return None
else:
- (type_base, type_mods) = split_p4_type(p4_type(file))
+ (type_base, type_mods, _) = split_p4_type(p4_type(file))
return p4_keywords_regexp_for_type(type_base, type_mods)
def setP4ExecBit(file, mode):
@@ -1208,6 +1221,9 @@ class P4UserMap:
else:
return True
+ def getP4UsernameEmail(self, userid):
+ return self.users[userid]
+
def getUserCacheFilename(self):
home = os.environ.get("HOME", os.environ.get("USERPROFILE"))
return home + "/.gitp4-usercache.txt"
@@ -2570,13 +2586,9 @@ class P4Sync(Command, P4UserMap):
sys.stdout.write('\r%s --> %s (%i MB)\n' % (file['depotFile'], relPath, size/1024/1024))
sys.stdout.flush()
- (type_base, type_mods) = split_p4_type(file["type"])
+ (type_base, type_mods, git_mode) = split_p4_type(file["type"])
- git_mode = "100644"
- if "x" in type_mods:
- git_mode = "100755"
if type_base == "symlink":
- git_mode = "120000"
# p4 print on a symlink sometimes contains "target\n";
# if it does, remove the newline
data = ''.join(contents)
@@ -3749,6 +3761,277 @@ class P4Branches(Command):
print "%s <= %s (%s)" % (branch, ",".join(settings["depot-paths"]), settings["change"])
return True
+class P4MakePatch(Command,P4UserMap):
+ """ Create a git-compatible patch from a P4 changelist using "p4 describe"
+
+ "p4 describe" isn't very happy about dealing with binary files: if the file type
+ is "text" then it outputs any binary deltas as plain text (ASCII?) while if
+ it the file is binary, "p4 describe" doesn't output anything at all.
+ """
+
+ def __init__(self):
+ Command.__init__(self)
+ P4UserMap.__init__(self)
+ self.options = [
+ optparse.make_option("--output", dest="output",
+ help="output directory for patches, if not specified, uses stdout"),
+ optparse.make_option("--strip-depot-prefix", dest="strip_depot_prefix",
+ help="strip the depot prefix from paths", action="store_true"),
+ ]
+ self.description = ("Generate a git-compatible patch for each changelist (shelved or submitted)")
+ self.verbose = False
+ self.output = None
+ self.client_prefix = None
+ self.strip_depot_prefix = False
+
+ def run(self, args):
+ if self.output and not os.path.isdir(self.output):
+ sys.exit("output directory %s does not exist" % self.output)
+
+ if self.strip_depot_prefix:
+ self.clientSpec = getClientSpec()
+ else:
+ self.clientSpec = None
+
+ self.loadUserMapFromCache()
+ if len(args) < 1:
+ return False
+
+ for change in args:
+ self.make_patch(int(change))
+
+ return True
+
+ def extract_files_from_commit(self, commit):
+ files = []
+ fnum = 0
+ while commit.has_key("depotFile%s" % fnum):
+ path = commit["depotFile%s" % fnum]
+
+ file = {}
+ file["path"] = path
+ file["rev"] = commit["rev%s" % fnum]
+ file["action"] = commit["action%s" % fnum]
+ file["type"] = commit["type%s" % fnum]
+
+ if file["type"] != "text" and \
+ file["type"] != "symlink":
+ sys.stderr.write("WARNING: skipping %s file %s\n" % (file["type"], path))
+ fnum = fnum + 1
+ continue
+
+ files.append(file)
+ fnum = fnum + 1
+ return files
+
+ def header_lines(self, file):
+ """ Return the git diff format header lines for a given change
+ """
+ ret = ""
+ type = file["type"]
+ (type_base, type_mods, git_mode) = split_p4_type(type)
+
+ if file["action"] == "add":
+ ret += "new file mode %s\n" % git_mode
+ elif file["action"] == "delete":
+ ret += "deleted file mode %s\n" % git_mode
+
+ return ret
+
+ def p4_fetch_delta(self, change, files, shelved=False):
+ """ Return the diff portion from "p4 describe".
+
+ Notes:
+ 1. p4 does not return this when using the "-G" python-mode, so
+ we have to do this using regular text parsing
+
+ 2. Binary files are not output at all
+
+ 3. New files are also not output
+
+ 4. Diffs of text files that include binary content come out with
+ any LF characters converted to:
+ LF
+ > <more content>
+
+ In short, don't use this for binary changes.
+ """
+ cmd = ["describe"]
+ if shelved:
+ cmd += ["-S"]
+ cmd += ["-du"]
+ cmd += ["%s" % change]
+ cmd = p4_build_cmd(cmd)
+
+ p4 = subprocess.Popen(cmd, shell=False, stdout=subprocess.PIPE)
+ try:
+ result = p4.stdout.readlines()
+ except EOFError:
+ pass
+ in_diff = False
+ matcher = re.compile('====\s+(.*)#(\d+)\s+\(text\)\s+====')
+ diffmatcher = re.compile("Differences ...")
+ delta = ""
+ skip_next_blank_line = False
+
+ for line in result:
+ if diffmatcher.match(line):
+ in_diff = True
+ continue
+
+ if in_diff:
+
+ if skip_next_blank_line and \
+ line.rstrip() == "":
+ skip_next_blank_line = False
+ continue
+
+ m = matcher.match(line)
+ if m:
+ file = self.map_path(m.group(1))
+ ver = m.group(2)
+ delta += "diff --git a%s b%s\n" % (file, file)
+ delta += "--- a%s\n" % file
+ delta += "+++ b%s\n" % file
+ skip_next_blank_line = True
+ else:
+ delta += line
+
+ delta += "\n"
+
+ exitCode = p4.wait()
+ if exitCode != 0:
+ raise IOError("p4 '%s' command failed" % str(cmd))
+
+ return delta
+
+ def map_path(self, path):
+ """ Remove leading "//", or if client prefix is being stripped, remove
+ that as well.
+ """
+ if self.strip_depot_prefix:
+ ret = "/" + self.clientSpec.map_in_client(path)
+ else:
+ ret = path[1:]
+
+ assert(ret[0] == '/') # should always have a leading "/"
+
+ return ret
+
+ def is_pending(self, description):
+ return description['status'] == 'pending'
+
+ def make_patch(self, change):
+ """ Generate a git-format patch for the given changelist.
+ For changes to existing files, use "p4 describe". For
+ deletions and additions, fetch the content.
+
+ This is _much_ slower than the normal sync method.
+ """
+
+ description = p4_describe(change)
+ shelved = False
+ if self.is_pending(description):
+ shelved = True
+ description = p4_describe(change, shelved=shelved)
+
+ userid = description["user"]
+ from_name = self.getP4UsernameEmail(userid)
+
+ if not from_name:
+ from_name = "unknown"
+
+ desc = description["desc"]
+ desc_lines = desc.split('\n')
+ subject = desc_lines[0].lstrip("\t")
+
+ comment = ""
+ for l in desc_lines[1:]:
+ comment += "%s\n" % l.lstrip("\t")
+
+ commit_date = time.strftime("%c %z", time.gmtime(int(description["time"])))
+
+ # try to emulate the stgit patch format
+ delta = "commit %s\n\n" % change
+ delta += "From: %s\n" % from_name
+ delta += "Date: %s\n" % commit_date
+ delta += "Subject: [PATCH] %s\n" % subject
+ delta += comment
+ delta += "---\n"
+
+ files = self.extract_files_from_commit(description)
+ if self.clientSpec:
+ self.clientSpec.update_client_spec_path_cache(files)
+
+ # add modified files, just patching up the diff provided
+ # by "p4 describe"
+
+ delta += self.p4_fetch_delta(change, files, shelved)
+
+ # add new or deleted files
+ for file in files:
+ name = file["path"]
+ add = file["action"] == "add"
+ delete = file["action"] == "delete"
+ symlink = file["type"] == "symlink"
+ output_name = self.map_path(name)
+
+ if add or delete:
+ if add:
+ before = "/dev/null"
+ after = "b%s" % output_name
+ else:
+ before = "a%s" % output_name
+ after = "/dev/null"
+
+ delta += "diff --git %s %s\n" % (before, after)
+ delta += self.header_lines(file)
+ delta += "--- %s\n" % before
+ delta += "+++ %s\n" % after
+
+ if add:
+ prefix = "+"
+ else:
+ prefix = "-"
+
+ if delete:
+ rev = int(file["rev"])
+ if shelved:
+ path_rev = "%s#%d" % (name, rev)
+ else:
+ path_rev = "%s#%d" % (name, rev-1)
+ else:
+ # added
+ if shelved:
+ path_rev = "%s@=%d" % (name, change)
+ else:
+ path_rev = "%s@%d" % (name, change)
+
+ (lines, delta_content) = self.read_file_contents(prefix, path_rev)
+
+ if add:
+ if lines > 0:
+ delta += "@@ -0,0 +1,%d @@\n" % lines
+ else:
+ delta += "@@ -1,%d +0,0 @@\n" % lines
+
+ delta += delta_content
+
+ if self.output:
+ with open("%s/%s.patch" % (self.output, change), "w") as f:
+ f.write(delta)
+ else:
+ print(delta)
+
+ def read_file_contents(self, prefix, path_rev):
+ delta_content = ""
+ lines = 0
+ for line in p4_read_pipe_lines(["print", "-q", "-k", path_rev]):
+ delta_content += "%s%s" % (prefix, line)
+ lines += 1
+
+ return (lines, delta_content)
+
class HelpFormatter(optparse.IndentedHelpFormatter):
def __init__(self):
optparse.IndentedHelpFormatter.__init__(self)
@@ -3775,7 +4058,8 @@ commands = {
"rebase" : P4Rebase,
"clone" : P4Clone,
"rollback" : P4RollBack,
- "branches" : P4Branches
+ "branches" : P4Branches,
+ "format-patch" : P4MakePatch,
}
diff --git a/t/t9832-make-patch.sh b/t/t9832-make-patch.sh
new file mode 100755
index 0000000000..5be6e4fcbb
--- /dev/null
+++ b/t/t9832-make-patch.sh
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+#
+# Converting P4 changes into patches
+#
+# - added, deleted, modified files
+# - regular commits, shelved commits
+#
+# directories and symblinks don't yet work
+# binary files will never work
+
+test_description='git p4 format-patch'
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d' '
+ start_p4d
+'
+
+test_expect_success 'init depot' '
+ (
+ cd "$cli" &&
+ echo file1 >file1 &&
+ p4 add file1 &&
+ p4 submit -d "change 1" && # cl 1
+ cat >file_to_delete <<-EOF &&
+ LINE1
+ LINE2
+ EOF
+ echo "non-empty" >file_to_delete &&
+ p4 add file_to_delete &&
+ p4 submit -d "change 2" && # cl 2
+ p4 edit file1 &&
+ cat >>file1 <<-EOF &&
+ LINE1
+ LINE2
+ EOF
+ p4 submit -d "change 3" && # cl 3
+ p4 delete file_to_delete &&
+ echo "file2" >file2 &&
+ p4 add file2 &&
+ p4 submit -d "change 4" # cl 4
+ )
+'
+
+test_expect_success 'patches on submitted changes' '
+ test_when_finished cleanup_git &&
+ mkdir -p "$git" &&
+ (
+ cd "$git" &&
+ mkdir output &&
+ git p4 format-patch --output "$PWD/output" 1 2 3 4 &&
+ patch -p1 <output/1.patch &&
+ test_path_is_file depot/file1 &&
+
+ patch -p1 <output/2.patch &&
+ test_path_is_file depot/file_to_delete &&
+
+ patch -p1 <output/3.patch &&
+ test_path_is_file depot/file1 &&
+ test_cmp "$cli"/file1 depot/file1 &&
+
+ patch -p1 <output/4.patch &&
+ test_path_is_missing depot/file_to_delete
+ )
+'
+
+test_expect_success 'create shelved changelists' '
+ (
+ cd "$cli" &&
+ cat >file10 <<-EOF &&
+ LINE1
+ LINE2
+ EOF
+ p4 add file10 &&
+ p4 delete file1 &&
+ p4 edit file2 &&
+ cat >>file2 <<-EOF &&
+ LINE3
+ LINE4
+ EOF
+
+ p4 shelve -i <<EOF &&
+Change: new
+Description:
+ Test commit
+
+ Further description
+Files:
+ //depot/file1
+ //depot/file2
+ //depot/file10
+EOF
+ p4 describe -s -S 5
+ )
+'
+
+test_expect_success 'git am from shelved changelists' '
+ test_when_finished cleanup_git &&
+ git p4 clone --destination="$git" //depot &&
+ (
+ cd "$git" &&
+ git p4 format-patch --strip-depot-prefix 5 > out.patch &&
+ git am out.patch &&
+ test_cmp file10 "$cli/file10" &&
+ test_cmp file2 "$cli/file2" &&
+ test_path_is_missing file1
+ )
+'
+
+test_expect_success 'add p4 symlink' '
+ (
+ cd "$cli" &&
+ echo "symlink_source" >symlink_source &&
+ ln -s symlink_source symlink &&
+ p4 add symlink_source symlink &&
+ p4 submit -d "add symlink" # cl 6
+ )
+'
+
+test_expect_success 'patch from symlink' '
+ test_when_finished cleanup_git &&
+ cd "$git" &&
+ (
+ git p4 format-patch 6 | patch -p1 &&
+ test_path_is_file depot/symlink_source &&
+ test -L depot/symlink
+ )
+'
+
+test_expect_success 'kill p4d' '
+ kill_p4d
+'
+
+test_done
--
2.15.1.272.gc310869385
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] git-p4: add format-patch subcommand
2018-02-26 11:48 ` [PATCH 1/1] " Luke Diamand
@ 2018-02-26 23:29 ` Miguel Torroja
2018-02-26 23:48 ` Eric Sunshine
1 sibling, 0 replies; 5+ messages in thread
From: Miguel Torroja @ 2018-02-26 23:29 UTC (permalink / raw)
To: Luke Diamand; +Cc: Git Users, Lars Schneider, George Vanburgh
very nice subcommand, I tested it with a shelved CL and a submitted CL.
Find my comments inline
On Mon, Feb 26, 2018 at 12:48 PM, Luke Diamand <luke@diamand.org> wrote:
> It takes a list of P4 changelists and generates a patch for
> each one, using "p4 describe".
>
> This is especially useful for applying shelved changelists
> to your git-p4 tree; the existing "git p4" subcommands do
> not handle these.
>
> That's because they "p4 print" the contents of each file at
> a given revision, and then use git-fastimport to generate the
> deltas. But in the case of a shelved changelist, there is no
> easy way to find out what the previous file state was - Perforce
> does not have the concept of a single repo-wide revision.
>
> Unfortunately, using "p4 describe" comes with a price: it cannot
> be used to reliably generate diffs for binary files (it tries to
> linebreak on LF characters) and it is also _much_ slower.
>
> Unicode character correctness is untested - in theory if
> "p4 describe" knows about the character encoding it shouldn't
> break unicode characters if they happen to contain LF, but I
> haven't tested this.
>
> Signed-off-by: Luke Diamand <luke@diamand.org>
> ---
> Documentation/git-p4.txt | 33 +++++
> git-p4.py | 304 +++++++++++++++++++++++++++++++++++++++++++++--
> t/t9832-make-patch.sh | 135 +++++++++++++++++++++
> 3 files changed, 462 insertions(+), 10 deletions(-)
> create mode 100755 t/t9832-make-patch.sh
>
> diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
> index d8c8f11c9f..1908b00de2 100644
> --- a/Documentation/git-p4.txt
> +++ b/Documentation/git-p4.txt
> @@ -164,6 +164,28 @@ $ git p4 submit --shelve
> $ git p4 submit --update-shelve 1234 --update-shelve 2345
> ----
>
> +
> +format-patch
> +~~~~~~~~~~
> +This will attempt to create a unified diff (using the git patch variant) which
> +can be passed to patch. This is generated using the output from "p4 describe".
> +
> +It includes the contents of added files (which "p4 describe" does not).
> +
> +Binary files cannot be handled correctly due to limitations in "p4 describe".
> +
> +It will handle both normal and shelved (pending) changelists.
> +
> +Because of the way this works, it will be much slower than the normal git-p4 clone
> +path.
> +
> +----
> +$ git p4 format-patch 12345
> +$ git p4 format-patch --output patchdir 12345 12346 12347
> +$ git p4 format-patch --strip-depot-prefix 12348 > out.patch
> +$ git am out.patch
> +----
> +
> OPTIONS
> -------
>
> @@ -337,6 +359,17 @@ These options can be used to modify 'git p4 rebase' behavior.
> --import-labels::
> Import p4 labels.
>
> +Format-patch options
> +~~~~~~~~~~~~~~~~~~~~
> +
> +--output::
> + Write patches to this directory (which must exist) instead of to
> + standard output.
> +
> +--strip-depot-prefix::
> + Strip the depot prefix from filenames in the patch. This makes
> + it suitable for passing to tools such as "git am".
> +
> DEPOT PATH SYNTAX
> -----------------
> The p4 depot path argument to 'git p4 sync' and 'git p4 clone' can
> diff --git a/git-p4.py b/git-p4.py
> index 7bb9cadc69..a1e998e6f5 100755
> --- a/git-p4.py
> +++ b/git-p4.py
> @@ -26,6 +26,7 @@ import zipfile
> import zlib
> import ctypes
> import errno
> +import time
>
> try:
> from subprocess import CalledProcessError
> @@ -316,12 +317,17 @@ def p4_last_change():
> results = p4CmdList(["changes", "-m", "1"], skip_info=True)
> return int(results[0]['change'])
>
> -def p4_describe(change):
> +def p4_describe(change, shelved=False):
> """Make sure it returns a valid result by checking for
> the presence of field "time". Return a dict of the
> results."""
>
> - ds = p4CmdList(["describe", "-s", str(change)], skip_info=True)
> + cmd = ["describe", "-s"]
> + if shelved:
> + cmd += ["-S"]
> + cmd += [str(change)]
> +
> + ds = p4CmdList(cmd, skip_info=True)
> if len(ds) != 1:
> die("p4 describe -s %d did not return 1 result: %s" % (change, str(ds)))
>
> @@ -372,7 +378,14 @@ def split_p4_type(p4type):
> mods = ""
> if len(s) > 1:
> mods = s[1]
> - return (base, mods)
> +
> + git_mode = "100644"
> + if "x" in mods:
> + git_mode = "100755"
> + if base == "symlink":
> + git_mode = "120000"
> +
> + return (base, mods, git_mode)
>
> #
> # return the raw p4 type of a file (text, text+ko, etc)
> @@ -413,7 +426,7 @@ def p4_keywords_regexp_for_file(file):
> if not os.path.exists(file):
> return None
> else:
> - (type_base, type_mods) = split_p4_type(p4_type(file))
> + (type_base, type_mods, _) = split_p4_type(p4_type(file))
> return p4_keywords_regexp_for_type(type_base, type_mods)
>
> def setP4ExecBit(file, mode):
> @@ -1208,6 +1221,9 @@ class P4UserMap:
> else:
> return True
>
> + def getP4UsernameEmail(self, userid):
> + return self.users[userid]
> +
> def getUserCacheFilename(self):
> home = os.environ.get("HOME", os.environ.get("USERPROFILE"))
> return home + "/.gitp4-usercache.txt"
> @@ -2570,13 +2586,9 @@ class P4Sync(Command, P4UserMap):
> sys.stdout.write('\r%s --> %s (%i MB)\n' % (file['depotFile'], relPath, size/1024/1024))
> sys.stdout.flush()
>
> - (type_base, type_mods) = split_p4_type(file["type"])
> + (type_base, type_mods, git_mode) = split_p4_type(file["type"])
>
> - git_mode = "100644"
> - if "x" in type_mods:
> - git_mode = "100755"
> if type_base == "symlink":
> - git_mode = "120000"
> # p4 print on a symlink sometimes contains "target\n";
> # if it does, remove the newline
> data = ''.join(contents)
> @@ -3749,6 +3761,277 @@ class P4Branches(Command):
> print "%s <= %s (%s)" % (branch, ",".join(settings["depot-paths"]), settings["change"])
> return True
>
> +class P4MakePatch(Command,P4UserMap):
> + """ Create a git-compatible patch from a P4 changelist using "p4 describe"
> +
> + "p4 describe" isn't very happy about dealing with binary files: if the file type
> + is "text" then it outputs any binary deltas as plain text (ASCII?) while if
> + it the file is binary, "p4 describe" doesn't output anything at all.
> + """
> +
> + def __init__(self):
> + Command.__init__(self)
> + P4UserMap.__init__(self)
> + self.options = [
> + optparse.make_option("--output", dest="output",
> + help="output directory for patches, if not specified, uses stdout"),
> + optparse.make_option("--strip-depot-prefix", dest="strip_depot_prefix",
> + help="strip the depot prefix from paths", action="store_true"),
> + ]
> + self.description = ("Generate a git-compatible patch for each changelist (shelved or submitted)")
> + self.verbose = False
> + self.output = None
> + self.client_prefix = None
> + self.strip_depot_prefix = False
> +
> + def run(self, args):
> + if self.output and not os.path.isdir(self.output):
> + sys.exit("output directory %s does not exist" % self.output)
> +
> + if self.strip_depot_prefix:
> + self.clientSpec = getClientSpec()
> + else:
> + self.clientSpec = None
> +
> + self.loadUserMapFromCache()
> + if len(args) < 1:
> + return False
> +
> + for change in args:
> + self.make_patch(int(change))
> +
> + return True
> +
> + def extract_files_from_commit(self, commit):
> + files = []
> + fnum = 0
> + while commit.has_key("depotFile%s" % fnum):
> + path = commit["depotFile%s" % fnum]
> +
> + file = {}
> + file["path"] = path
> + file["rev"] = commit["rev%s" % fnum]
> + file["action"] = commit["action%s" % fnum]
> + file["type"] = commit["type%s" % fnum]
I know the name "file" has been previously used in git-p4.py, but as
file is a built-in type, could we just rename it?
> +
> + if file["type"] != "text" and \
> + file["type"] != "symlink":
> + sys.stderr.write("WARNING: skipping %s file %s\n" % (file["type"], path))
> + fnum = fnum + 1
> + continue
> +
> + files.append(file)
> + fnum = fnum + 1
> + return files
> +
> + def header_lines(self, file):
> + """ Return the git diff format header lines for a given change
> + """
> + ret = ""
> + type = file["type"]
Same thing for the variable type as in the case of "file" (type is the
'type' object)
> + (type_base, type_mods, git_mode) = split_p4_type(type)
> +
> + if file["action"] == "add":
> + ret += "new file mode %s\n" % git_mode
> + elif file["action"] == "delete":
> + ret += "deleted file mode %s\n" % git_mode
> +
> + return ret
> +
> + def p4_fetch_delta(self, change, files, shelved=False):
> + """ Return the diff portion from "p4 describe".
> +
> + Notes:
> + 1. p4 does not return this when using the "-G" python-mode, so
> + we have to do this using regular text parsing
> +
> + 2. Binary files are not output at all
> +
> + 3. New files are also not output
> +
> + 4. Diffs of text files that include binary content come out with
> + any LF characters converted to:
> + LF
> + > <more content>
> +
> + In short, don't use this for binary changes.
> + """
> + cmd = ["describe"]
> + if shelved:
> + cmd += ["-S"]
> + cmd += ["-du"]
> + cmd += ["%s" % change]
> + cmd = p4_build_cmd(cmd)
> +
> + p4 = subprocess.Popen(cmd, shell=False, stdout=subprocess.PIPE)
> + try:
> + result = p4.stdout.readlines()
> + except EOFError:
> + pass
> + in_diff = False
> + matcher = re.compile('====\s+(.*)#(\d+)\s+\(text\)\s+====')
> + diffmatcher = re.compile("Differences ...")
> + delta = ""
> + skip_next_blank_line = False
> +
> + for line in result:
> + if diffmatcher.match(line):
> + in_diff = True
> + continue
> +
> + if in_diff:
> +
> + if skip_next_blank_line and \
> + line.rstrip() == "":
> + skip_next_blank_line = False
> + continue
> +
> + m = matcher.match(line)
> + if m:
> + file = self.map_path(m.group(1))
> + ver = m.group(2)
> + delta += "diff --git a%s b%s\n" % (file, file)
> + delta += "--- a%s\n" % file
> + delta += "+++ b%s\n" % file
> + skip_next_blank_line = True
> + else:
> + delta += line
> +
> + delta += "\n"
> +
> + exitCode = p4.wait()
> + if exitCode != 0:
> + raise IOError("p4 '%s' command failed" % str(cmd))
> +
> + return delta
> +
> + def map_path(self, path):
> + """ Remove leading "//", or if client prefix is being stripped, remove
> + that as well.
> + """
> + if self.strip_depot_prefix:
> + ret = "/" + self.clientSpec.map_in_client(path)
> + else:
> + ret = path[1:]
> +
> + assert(ret[0] == '/') # should always have a leading "/"
> +
> + return ret
> +
> + def is_pending(self, description):
> + return description['status'] == 'pending'
> +
> + def make_patch(self, change):
> + """ Generate a git-format patch for the given changelist.
> + For changes to existing files, use "p4 describe". For
> + deletions and additions, fetch the content.
> +
> + This is _much_ slower than the normal sync method.
> + """
> +
> + description = p4_describe(change)
> + shelved = False
> + if self.is_pending(description):
> + shelved = True
> + description = p4_describe(change, shelved=shelved)
> +
> + userid = description["user"]
> + from_name = self.getP4UsernameEmail(userid)
> +
> + if not from_name:
> + from_name = "unknown"
> +
> + desc = description["desc"]
> + desc_lines = desc.split('\n')
> + subject = desc_lines[0].lstrip("\t")
> +
> + comment = ""
> + for l in desc_lines[1:]:
> + comment += "%s\n" % l.lstrip("\t")
> +
> + commit_date = time.strftime("%c %z", time.gmtime(int(description["time"])))
> +
> + # try to emulate the stgit patch format
> + delta = "commit %s\n\n" % change
I had problems with this "commit 1234". In my case, it prevents to be
used with "git am". I had to remove this in order to apply it
> + delta += "From: %s\n" % from_name
> + delta += "Date: %s\n" % commit_date
> + delta += "Subject: [PATCH] %s\n" % subject
> + delta += comment
In theory, in the mbox standard, there should a blank line between
"subject: " and the mail body. I can see "git am" tolerates it.
Anyway, git am is adding a blank line between the first line (the
subject) and the rest of the commit log with this patch format.
> + delta += "---\n"
> +
> + files = self.extract_files_from_commit(description)
> + if self.clientSpec:
> + self.clientSpec.update_client_spec_path_cache(files)
Maybe I'm missing something or did something wrong when I tested it
but I was expecting the common depot-path prefix to be removed from
the diff path in case the option --strip-depot-prefix is set, but in
my case it only removed the "//depot/".
> +
> + # add modified files, just patching up the diff provided
> + # by "p4 describe"
> +
> + delta += self.p4_fetch_delta(change, files, shelved)
> +
> + # add new or deleted files
> + for file in files:
> + name = file["path"]
> + add = file["action"] == "add"
> + delete = file["action"] == "delete"
> + symlink = file["type"] == "symlink"
> + output_name = self.map_path(name)
> +
> + if add or delete:
> + if add:
> + before = "/dev/null"
> + after = "b%s" % output_name
> + else:
> + before = "a%s" % output_name
> + after = "/dev/null"
> +
> + delta += "diff --git %s %s\n" % (before, after)
> + delta += self.header_lines(file)
> + delta += "--- %s\n" % before
> + delta += "+++ %s\n" % after
> +
> + if add:
> + prefix = "+"
> + else:
> + prefix = "-"
> +
> + if delete:
> + rev = int(file["rev"])
> + if shelved:
> + path_rev = "%s#%d" % (name, rev)
> + else:
> + path_rev = "%s#%d" % (name, rev-1)
> + else:
> + # added
> + if shelved:
> + path_rev = "%s@=%d" % (name, change)
> + else:
> + path_rev = "%s@%d" % (name, change)
> +
> + (lines, delta_content) = self.read_file_contents(prefix, path_rev)
> +
> + if add:
> + if lines > 0:
> + delta += "@@ -0,0 +1,%d @@\n" % lines
> + else:
> + delta += "@@ -1,%d +0,0 @@\n" % lines
> +
> + delta += delta_content
> +
> + if self.output:
> + with open("%s/%s.patch" % (self.output, change), "w") as f:
> + f.write(delta)
> + else:
> + print(delta)
> +
> + def read_file_contents(self, prefix, path_rev):
> + delta_content = ""
> + lines = 0
> + for line in p4_read_pipe_lines(["print", "-q", "-k", path_rev]):
> + delta_content += "%s%s" % (prefix, line)
> + lines += 1
> +
> + return (lines, delta_content)
> +
> class HelpFormatter(optparse.IndentedHelpFormatter):
> def __init__(self):
> optparse.IndentedHelpFormatter.__init__(self)
> @@ -3775,7 +4058,8 @@ commands = {
> "rebase" : P4Rebase,
> "clone" : P4Clone,
> "rollback" : P4RollBack,
> - "branches" : P4Branches
> + "branches" : P4Branches,
> + "format-patch" : P4MakePatch,
> }
>
>
> diff --git a/t/t9832-make-patch.sh b/t/t9832-make-patch.sh
> new file mode 100755
> index 0000000000..5be6e4fcbb
> --- /dev/null
> +++ b/t/t9832-make-patch.sh
> @@ -0,0 +1,135 @@
> +#!/bin/sh
> +
> +#
> +# Converting P4 changes into patches
> +#
> +# - added, deleted, modified files
> +# - regular commits, shelved commits
> +#
> +# directories and symblinks don't yet work
> +# binary files will never work
> +
> +test_description='git p4 format-patch'
> +
> +. ./lib-git-p4.sh
> +
> +test_expect_success 'start p4d' '
> + start_p4d
> +'
> +
> +test_expect_success 'init depot' '
> + (
> + cd "$cli" &&
> + echo file1 >file1 &&
> + p4 add file1 &&
> + p4 submit -d "change 1" && # cl 1
> + cat >file_to_delete <<-EOF &&
> + LINE1
> + LINE2
> + EOF
> + echo "non-empty" >file_to_delete &&
> + p4 add file_to_delete &&
> + p4 submit -d "change 2" && # cl 2
> + p4 edit file1 &&
> + cat >>file1 <<-EOF &&
> + LINE1
> + LINE2
> + EOF
> + p4 submit -d "change 3" && # cl 3
> + p4 delete file_to_delete &&
> + echo "file2" >file2 &&
> + p4 add file2 &&
> + p4 submit -d "change 4" # cl 4
> + )
> +'
> +
> +test_expect_success 'patches on submitted changes' '
> + test_when_finished cleanup_git &&
> + mkdir -p "$git" &&
> + (
> + cd "$git" &&
> + mkdir output &&
> + git p4 format-patch --output "$PWD/output" 1 2 3 4 &&
> + patch -p1 <output/1.patch &&
> + test_path_is_file depot/file1 &&
> +
> + patch -p1 <output/2.patch &&
> + test_path_is_file depot/file_to_delete &&
> +
> + patch -p1 <output/3.patch &&
> + test_path_is_file depot/file1 &&
> + test_cmp "$cli"/file1 depot/file1 &&
> +
> + patch -p1 <output/4.patch &&
> + test_path_is_missing depot/file_to_delete
> + )
> +'
> +
> +test_expect_success 'create shelved changelists' '
> + (
> + cd "$cli" &&
> + cat >file10 <<-EOF &&
> + LINE1
> + LINE2
> + EOF
> + p4 add file10 &&
> + p4 delete file1 &&
> + p4 edit file2 &&
> + cat >>file2 <<-EOF &&
> + LINE3
> + LINE4
> + EOF
> +
> + p4 shelve -i <<EOF &&
> +Change: new
> +Description:
> + Test commit
> +
> + Further description
> +Files:
> + //depot/file1
> + //depot/file2
> + //depot/file10
> +EOF
> + p4 describe -s -S 5
> + )
> +'
> +
> +test_expect_success 'git am from shelved changelists' '
> + test_when_finished cleanup_git &&
> + git p4 clone --destination="$git" //depot &&
> + (
> + cd "$git" &&
> + git p4 format-patch --strip-depot-prefix 5 > out.patch &&
> + git am out.patch &&
> + test_cmp file10 "$cli/file10" &&
> + test_cmp file2 "$cli/file2" &&
> + test_path_is_missing file1
> + )
> +'
> +
> +test_expect_success 'add p4 symlink' '
> + (
> + cd "$cli" &&
> + echo "symlink_source" >symlink_source &&
> + ln -s symlink_source symlink &&
> + p4 add symlink_source symlink &&
> + p4 submit -d "add symlink" # cl 6
> + )
> +'
> +
> +test_expect_success 'patch from symlink' '
> + test_when_finished cleanup_git &&
> + cd "$git" &&
> + (
> + git p4 format-patch 6 | patch -p1 &&
> + test_path_is_file depot/symlink_source &&
> + test -L depot/symlink
> + )
> +'
> +
> +test_expect_success 'kill p4d' '
> + kill_p4d
> +'
> +
> +test_done
> --
> 2.15.1.272.gc310869385
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] git-p4: add format-patch subcommand
2018-02-26 11:48 ` [PATCH 1/1] " Luke Diamand
2018-02-26 23:29 ` Miguel Torroja
@ 2018-02-26 23:48 ` Eric Sunshine
2018-03-12 9:40 ` Luke Diamand
1 sibling, 1 reply; 5+ messages in thread
From: Eric Sunshine @ 2018-02-26 23:48 UTC (permalink / raw)
To: Luke Diamand; +Cc: Git List, Lars Schneider, Miguel Torroja, George Vanburgh
On Mon, Feb 26, 2018 at 6:48 AM, Luke Diamand <luke@diamand.org> wrote:
> It takes a list of P4 changelists and generates a patch for
> each one, using "p4 describe".
> [...]
> Signed-off-by: Luke Diamand <luke@diamand.org>
> ---
> diff --git a/git-p4.py b/git-p4.py
> @@ -3749,6 +3761,277 @@ class P4Branches(Command):
> +class P4MakePatch(Command,P4UserMap):
> + def run(self, args):
> + if self.output and not os.path.isdir(self.output):
> + sys.exit("output directory %s does not exist" % self.output)
For consistency with "git format-patch", this could create the output
directory automatically rather than erroring out.
> + if self.strip_depot_prefix:
> + self.clientSpec = getClientSpec()
> + else:
> + self.clientSpec = None
> +
> + self.loadUserMapFromCache()
> + if len(args) < 1:
> + return False
Would it make sense to handle this no-arguments case earlier before
doing work, such as loading the user map from cache?
> + for change in args:
> + self.make_patch(int(change))
> +
> + return True
> +
> + def p4_fetch_delta(self, change, files, shelved=False):
> + cmd = ["describe"]
> + if shelved:
> + cmd += ["-S"]
> + cmd += ["-du"]
> + cmd += ["%s" % change]
> + cmd = p4_build_cmd(cmd)
> +
> + p4 = subprocess.Popen(cmd, shell=False, stdout=subprocess.PIPE)
> + try:
> + result = p4.stdout.readlines()
> + except EOFError:
> + pass
> + in_diff = False
> + matcher = re.compile('====\s+(.*)#(\d+)\s+\(text\)\s+====')
> + diffmatcher = re.compile("Differences ...")
I'm not familiar with the output of "p4 describe", but does it include
user-supplied text? If so, would it be safer to anchor 'diffmatcher',
for instance, "^Diferences...$"?
> + delta = ""
> + skip_next_blank_line = False
> +
> + for line in result:
> + if diffmatcher.match(line):
Stepping back, does "Differences..." appear on a line of its own? If
so, why does this need to be a regex at all? Can't it just do a direct
string comparison?
> + in_diff = True
> + continue
> +
> + if in_diff:
> +
> + if skip_next_blank_line and \
> + line.rstrip() == "":
> + skip_next_blank_line = False
> + continue
> +
> + m = matcher.match(line)
> + if m:
> + file = self.map_path(m.group(1))
> + ver = m.group(2)
> + delta += "diff --git a%s b%s\n" % (file, file)
> + delta += "--- a%s\n" % file
> + delta += "+++ b%s\n" % file
> + skip_next_blank_line = True
> + else:
> + delta += line
> +
> + delta += "\n"
> +
> + exitCode = p4.wait()
> + if exitCode != 0:
> + raise IOError("p4 '%s' command failed" % str(cmd))
Since p4.stdout.readlines() gathered all output from the command
before massaging it into Git format, can't the p4.wait() be done
earlier, just after the output has been read?
> + return delta
> +
> + def make_patch(self, change):
> + [...]
> + # add new or deleted files
> + for file in files:
> + [...]
> + if add or delete:
> + if add:
> + [...]
> + else:
> + [...]
> +
> + [...]
> +
> + if add:
> + prefix = "+"
> + else:
> + prefix = "-"
> +
> + if delete:
> + [...]
> + else:
> + # added
> + [...]
> +
> + (lines, delta_content) = self.read_file_contents(prefix, path_rev)
> +
> + if add:
> + if lines > 0:
> + delta += "@@ -0,0 +1,%d @@\n" % lines
> + else:
> + delta += "@@ -1,%d +0,0 @@\n" % lines
It's not clear why you sometimes check 'add' but other times 'delete'.
Perhaps always used one or the other? For instance:
action = file["action"]
if action == "add" or action == "delete":
if action == "add":
before = "/dev/null"
...
else
...
delta += ...
if action == "add":
...
or something.
> + delta += delta_content
> +
> + if self.output:
> + with open("%s/%s.patch" % (self.output, change), "w") as f:
> + f.write(delta)
> + else:
> + print(delta)
> diff --git a/t/t9832-make-patch.sh b/t/t9832-make-patch.sh
> @@ -0,0 +1,135 @@
> +# Converting P4 changes into patches
> +#
> +# - added, deleted, modified files
> +# - regular commits, shelved commits
> +#
> +# directories and symblinks don't yet work
> +# binary files will never work
s/symblinks/symlinks/
> +test_expect_success 'init depot' '
> + (
> + cd "$cli" &&
> + echo file1 >file1 &&
> + p4 add file1 &&
> + p4 submit -d "change 1" && # cl 1
> + cat >file_to_delete <<-EOF &&
Using -\EOF would signal that you don't expect interpolation within the heredoc.
> + LINE1
> + LINE2
> + EOF
> + echo "non-empty" >file_to_delete &&
> + p4 add file_to_delete &&
> + p4 submit -d "change 2" && # cl 2
> + p4 edit file1 &&
> + cat >>file1 <<-EOF &&
> + LINE1
> + LINE2
> + EOF
> + p4 submit -d "change 3" && # cl 3
> + p4 delete file_to_delete &&
> + echo "file2" >file2 &&
> + p4 add file2 &&
> + p4 submit -d "change 4" # cl 4
> + )
> +'
> +test_expect_success 'add p4 symlink' '
> + (
> + cd "$cli" &&
> + echo "symlink_source" >symlink_source &&
> + ln -s symlink_source symlink &&
Should this test be protected with the SYMLINKS prerequisite?
> + p4 add symlink_source symlink &&
> + p4 submit -d "add symlink" # cl 6
> + )
> +'
> +
> +test_expect_success 'patch from symlink' '
Ditto SYMLINKS?
> + test_when_finished cleanup_git &&
> + cd "$git" &&
> + (
> + git p4 format-patch 6 | patch -p1 &&
> + test_path_is_file depot/symlink_source &&
> + test -L depot/symlink
> + )
> +'
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] git-p4: add format-patch subcommand
2018-02-26 23:48 ` Eric Sunshine
@ 2018-03-12 9:40 ` Luke Diamand
0 siblings, 0 replies; 5+ messages in thread
From: Luke Diamand @ 2018-03-12 9:40 UTC (permalink / raw)
To: Eric Sunshine; +Cc: Git List, Lars Schneider, Miguel Torroja, George Vanburgh
On 26 February 2018 at 23:48, Eric Sunshine <sunshine@sunshineco.com> wrote:
> On Mon, Feb 26, 2018 at 6:48 AM, Luke Diamand <luke@diamand.org> wrote:
>> It takes a list of P4 changelists and generates a patch for
>> each one, using "p4 describe".
>> [...]
Just to say that I almost got this working reasonably well, but it
gets pretty nasty making binary files work - in order to generate the
git binary format I need a base85 encoder which exists in Python3, but
not in Python2. And while I could obviously write it in Python easily
enough, it starts to feel like an awful lot of code implementing (and
maintaining) a slightly second-rate "git diff". And while it's
tempting to just not support binary files, in reality Perforce repos
seem to end up with lots of them.
So I think I might have another go at the previous scheme. What I will
have to do is to first create a faked-up commit representing the point
prior to the shelved commit for each file ("for file@rev-1 in files"),
and then create the real commit ("for file@rev in files"). It's
probably not as grim as it sounds and then means that we end up with
git doing all the hard work of diffing files, rather than relying on
Perforce's diff engine in conjunction with some Python.
>> Signed-off-by: Luke Diamand <luke@diamand.org>
>> ---
>> diff --git a/git-p4.py b/git-p4.py
>> @@ -3749,6 +3761,277 @@ class P4Branches(Command):
>> +class P4MakePatch(Command,P4UserMap):
>> + def run(self, args):
>> + if self.output and not os.path.isdir(self.output):
>> + sys.exit("output directory %s does not exist" % self.output)
>
> For consistency with "git format-patch", this could create the output
> directory automatically rather than erroring out.
>
>> + if self.strip_depot_prefix:
>> + self.clientSpec = getClientSpec()
>> + else:
>> + self.clientSpec = None
>> +
>> + self.loadUserMapFromCache()
>> + if len(args) < 1:
>> + return False
>
> Would it make sense to handle this no-arguments case earlier before
> doing work, such as loading the user map from cache?
>
>> + for change in args:
>> + self.make_patch(int(change))
>> +
>> + return True
>> +
>> + def p4_fetch_delta(self, change, files, shelved=False):
>> + cmd = ["describe"]
>> + if shelved:
>> + cmd += ["-S"]
>> + cmd += ["-du"]
>> + cmd += ["%s" % change]
>> + cmd = p4_build_cmd(cmd)
>> +
>> + p4 = subprocess.Popen(cmd, shell=False, stdout=subprocess.PIPE)
>> + try:
>> + result = p4.stdout.readlines()
>> + except EOFError:
>> + pass
>> + in_diff = False
>> + matcher = re.compile('====\s+(.*)#(\d+)\s+\(text\)\s+====')
>> + diffmatcher = re.compile("Differences ...")
>
> I'm not familiar with the output of "p4 describe", but does it include
> user-supplied text? If so, would it be safer to anchor 'diffmatcher',
> for instance, "^Diferences...$"?
>
>> + delta = ""
>> + skip_next_blank_line = False
>> +
>> + for line in result:
>> + if diffmatcher.match(line):
>
> Stepping back, does "Differences..." appear on a line of its own? If
> so, why does this need to be a regex at all? Can't it just do a direct
> string comparison?
>
>> + in_diff = True
>> + continue
>> +
>> + if in_diff:
>> +
>> + if skip_next_blank_line and \
>> + line.rstrip() == "":
>> + skip_next_blank_line = False
>> + continue
>> +
>> + m = matcher.match(line)
>> + if m:
>> + file = self.map_path(m.group(1))
>> + ver = m.group(2)
>> + delta += "diff --git a%s b%s\n" % (file, file)
>> + delta += "--- a%s\n" % file
>> + delta += "+++ b%s\n" % file
>> + skip_next_blank_line = True
>> + else:
>> + delta += line
>> +
>> + delta += "\n"
>> +
>> + exitCode = p4.wait()
>> + if exitCode != 0:
>> + raise IOError("p4 '%s' command failed" % str(cmd))
>
> Since p4.stdout.readlines() gathered all output from the command
> before massaging it into Git format, can't the p4.wait() be done
> earlier, just after the output has been read?
>
>> + return delta
>> +
>> + def make_patch(self, change):
>> + [...]
>> + # add new or deleted files
>> + for file in files:
>> + [...]
>> + if add or delete:
>> + if add:
>> + [...]
>> + else:
>> + [...]
>> +
>> + [...]
>> +
>> + if add:
>> + prefix = "+"
>> + else:
>> + prefix = "-"
>> +
>> + if delete:
>> + [...]
>> + else:
>> + # added
>> + [...]
>> +
>> + (lines, delta_content) = self.read_file_contents(prefix, path_rev)
>> +
>> + if add:
>> + if lines > 0:
>> + delta += "@@ -0,0 +1,%d @@\n" % lines
>> + else:
>> + delta += "@@ -1,%d +0,0 @@\n" % lines
>
> It's not clear why you sometimes check 'add' but other times 'delete'.
> Perhaps always used one or the other? For instance:
>
> action = file["action"]
> if action == "add" or action == "delete":
> if action == "add":
> before = "/dev/null"
> ...
> else
> ...
>
> delta += ...
>
> if action == "add":
> ...
>
> or something.
>
>> + delta += delta_content
>> +
>> + if self.output:
>> + with open("%s/%s.patch" % (self.output, change), "w") as f:
>> + f.write(delta)
>> + else:
>> + print(delta)
>> diff --git a/t/t9832-make-patch.sh b/t/t9832-make-patch.sh
>> @@ -0,0 +1,135 @@
>> +# Converting P4 changes into patches
>> +#
>> +# - added, deleted, modified files
>> +# - regular commits, shelved commits
>> +#
>> +# directories and symblinks don't yet work
>> +# binary files will never work
>
> s/symblinks/symlinks/
>
>> +test_expect_success 'init depot' '
>> + (
>> + cd "$cli" &&
>> + echo file1 >file1 &&
>> + p4 add file1 &&
>> + p4 submit -d "change 1" && # cl 1
>> + cat >file_to_delete <<-EOF &&
>
> Using -\EOF would signal that you don't expect interpolation within the heredoc.
>
>> + LINE1
>> + LINE2
>> + EOF
>> + echo "non-empty" >file_to_delete &&
>> + p4 add file_to_delete &&
>> + p4 submit -d "change 2" && # cl 2
>> + p4 edit file1 &&
>> + cat >>file1 <<-EOF &&
>> + LINE1
>> + LINE2
>> + EOF
>> + p4 submit -d "change 3" && # cl 3
>> + p4 delete file_to_delete &&
>> + echo "file2" >file2 &&
>> + p4 add file2 &&
>> + p4 submit -d "change 4" # cl 4
>> + )
>> +'
>> +test_expect_success 'add p4 symlink' '
>> + (
>> + cd "$cli" &&
>> + echo "symlink_source" >symlink_source &&
>> + ln -s symlink_source symlink &&
>
> Should this test be protected with the SYMLINKS prerequisite?
>
>> + p4 add symlink_source symlink &&
>> + p4 submit -d "add symlink" # cl 6
>> + )
>> +'
>> +
>> +test_expect_success 'patch from symlink' '
>
> Ditto SYMLINKS?
>
>> + test_when_finished cleanup_git &&
>> + cd "$git" &&
>> + (
>> + git p4 format-patch 6 | patch -p1 &&
>> + test_path_is_file depot/symlink_source &&
>> + test -L depot/symlink
>> + )
>> +'
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-03-12 9:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-26 11:48 [PATCH 0/1] git-p4: add format-patch subcommand Luke Diamand
2018-02-26 11:48 ` [PATCH 1/1] " Luke Diamand
2018-02-26 23:29 ` Miguel Torroja
2018-02-26 23:48 ` Eric Sunshine
2018-03-12 9:40 ` Luke Diamand
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).