From: Derrick Stolee <stolee@gmail.com> To: Elijah Newren via GitGitGadget <gitgitgadget@gmail.com>, git@vger.kernel.org Cc: Derrick Stolee <dstolee@microsoft.com>, Elijah Newren <newren@gmail.com> Subject: Re: [PATCH v3 00/18] Sparse checkout improvements -- improved sparsity updating Date: Fri, 27 Mar 2020 09:22:07 -0400 Message-ID: <9f33833a-43e3-8878-859d-1c116a54de97@gmail.com> (raw) In-Reply-To: <pull.726.v3.git.git.1585270142.gitgitgadget@gmail.com> On 3/26/2020 8:48 PM, Elijah Newren via GitGitGadget wrote: > This series provides a replacement for the sparsity updating in > sparse-checkout that is based on the logic from git read-tree -mu HEAD. The > most important bit is patch 9 and its lengthy commit message explaining the > current state and rationale for most the series, though patches 16 and 17 > have additional related directions and rationale for the series. Those three > patches are the most important to review. > > Changes since v2: > > * addressed Stolee's cleanups and added his Reviewed-by to the series > (hopefully the next two changes don't invalidate that) The other changes below look good to me. My Reviewed-by stands. > * added a test for the new 'reapply' subcommand (noticed it was missing > with Stolee's test coverage report) > * fix a minor issue with two of the other tests I modified -- when I'm > grepping through stderr for a command, I need to make sure to actually > record stderr from that command (otherwise my grep is looking through the > stderr of a previous command that was recorded). Also, since I messed > this up, I added one or two more sanity checks while I was at it. Thanks! -Stolee
prev parent reply other threads:[~2020-03-27 13:22 UTC|newest] Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-14 7:11 [PATCH 0/7] " Elijah Newren via GitGitGadget 2020-03-14 7:11 ` [PATCH 1/7] unpack-trees: fix minor typo in comment Elijah Newren via GitGitGadget 2020-03-14 7:11 ` [PATCH 2/7] t1091: make some tests a little more defensive against failures Elijah Newren via GitGitGadget 2020-03-14 7:11 ` [PATCH 3/7] unpack-trees: allow check_updates() to work on a different index Elijah Newren via GitGitGadget 2020-03-14 7:11 ` [PATCH 4/7] unpack-trees: do not mark a dirty path with SKIP_WORKTREE Elijah Newren via GitGitGadget 2020-03-15 14:39 ` Derrick Stolee 2020-03-14 7:11 ` [PATCH 5/7] unpack-trees: add a new update_sparsity() function Elijah Newren via GitGitGadget 2020-03-15 18:17 ` Derrick Stolee 2020-03-16 20:24 ` Elijah Newren 2020-03-14 7:11 ` [PATCH 6/7] sparse-checkout: use " Elijah Newren via GitGitGadget 2020-03-15 16:19 ` Derrick Stolee 2020-03-16 17:02 ` Elijah Newren 2020-03-14 7:11 ` [PATCH 7/7] sparse-checkout: provide a new update subcommand Elijah Newren via GitGitGadget 2020-03-15 16:24 ` Derrick Stolee 2020-03-16 17:05 ` Elijah Newren 2020-03-16 17:18 ` Derrick Stolee 2020-03-16 19:23 ` Elijah Newren 2020-03-15 12:26 ` [PATCH 0/7] Sparse checkout improvements -- improved sparsity updating Derrick Stolee 2020-03-21 17:59 ` [PATCH v2 00/18] " Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 01/18] unpack-trees: fix minor typo in comment Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 02/18] unpack-trees: remove unused error type Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 03/18] unpack-trees: simplify verify_absent_sparse() Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 04/18] unpack-trees: simplify pattern_list freeing Elijah Newren via GitGitGadget 2020-03-23 15:57 ` Derrick Stolee 2020-03-21 17:59 ` [PATCH v2 05/18] t1091: make some tests a little more defensive against failures Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 06/18] unpack-trees: allow check_updates() to work on a different index Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 07/18] unpack-trees: do not mark a dirty path with SKIP_WORKTREE Elijah Newren via GitGitGadget 2020-03-21 17:59 ` [PATCH v2 08/18] unpack-trees: pull sparse-checkout pattern reading into a new function Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 09/18] unpack-trees: add a new update_sparsity() function Elijah Newren via GitGitGadget 2020-03-23 18:02 ` Derrick Stolee 2020-03-23 18:10 ` Elijah Newren 2020-03-23 18:21 ` Derrick Stolee 2020-03-23 20:24 ` Junio C Hamano 2020-03-21 18:00 ` [PATCH v2 10/18] sparse-checkout: use " Elijah Newren via GitGitGadget 2020-03-23 18:07 ` Derrick Stolee 2020-03-23 18:14 ` Elijah Newren 2020-03-23 18:22 ` Derrick Stolee 2020-03-21 18:00 ` [PATCH v2 11/18] sparse-checkout: use improved unpack_trees porcelain messages Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 12/18] unpack-trees: move ERROR_WOULD_LOSE_SUBMODULE earlier Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 13/18] unpack-trees: rename ERROR_* fields meant for warnings to WARNING_* Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 14/18] unpack-trees: split display_error_msgs() into two Elijah Newren via GitGitGadget 2020-03-23 18:32 ` Derrick Stolee 2020-03-21 18:00 ` [PATCH v2 15/18] unpack-trees: make sparse path messages sound like warnings Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 16/18] unpack-trees: provide warnings on sparse updates for unmerged paths too Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 17/18] unpack-trees: failure to set SKIP_WORKTREE bits always just a warning Elijah Newren via GitGitGadget 2020-03-21 18:00 ` [PATCH v2 18/18] sparse-checkout: provide a new reapply subcommand Elijah Newren via GitGitGadget 2020-03-23 18:40 ` Derrick Stolee 2020-03-23 18:41 ` [PATCH v2 00/18] Sparse checkout improvements -- improved sparsity updating Derrick Stolee 2020-03-23 20:26 ` Junio C Hamano 2020-03-27 0:48 ` [PATCH v3 " Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 01/18] unpack-trees: fix minor typo in comment Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 02/18] unpack-trees: remove unused error type Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 03/18] unpack-trees: simplify verify_absent_sparse() Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 04/18] unpack-trees: simplify pattern_list freeing Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 05/18] t1091: make some tests a little more defensive against failures Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 06/18] unpack-trees: allow check_updates() to work on a different index Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 07/18] unpack-trees: do not mark a dirty path with SKIP_WORKTREE Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 08/18] unpack-trees: pull sparse-checkout pattern reading into a new function Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 09/18] unpack-trees: add a new update_sparsity() function Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 10/18] sparse-checkout: use " Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 11/18] sparse-checkout: use improved unpack_trees porcelain messages Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 12/18] unpack-trees: move ERROR_WOULD_LOSE_SUBMODULE earlier Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 13/18] unpack-trees: rename ERROR_* fields meant for warnings to WARNING_* Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 14/18] unpack-trees: split display_error_msgs() into two Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 15/18] unpack-trees: make sparse path messages sound like warnings Elijah Newren via GitGitGadget 2020-03-27 0:48 ` [PATCH v3 16/18] unpack-trees: provide warnings on sparse updates for unmerged paths too Elijah Newren via GitGitGadget 2020-03-27 0:49 ` [PATCH v3 17/18] unpack-trees: failure to set SKIP_WORKTREE bits always just a warning Elijah Newren via GitGitGadget 2020-03-27 0:49 ` [PATCH v3 18/18] sparse-checkout: provide a new reapply subcommand Elijah Newren via GitGitGadget 2020-03-27 13:22 ` Derrick Stolee [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style List information: http://vger.kernel.org/majordomo-info.html * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=9f33833a-43e3-8878-859d-1c116a54de97@gmail.com \ --to=stolee@gmail.com \ --cc=dstolee@microsoft.com \ --cc=git@vger.kernel.org \ --cc=gitgitgadget@gmail.com \ --cc=newren@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
git@vger.kernel.org list mirror (unofficial, one of many) This inbox may be cloned and mirrored by anyone: git clone --mirror https://public-inbox.org/git git clone --mirror http://ou63pmih66umazou.onion/git git clone --mirror http://czquwvybam4bgbro.onion/git git clone --mirror http://hjrcffqmbrq6wope.onion/git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V1 git git/ https://public-inbox.org/git \ git@vger.kernel.org public-inbox-index git Example config snippet for mirrors. Newsgroups are available over NNTP: nntp://news.public-inbox.org/inbox.comp.version-control.git nntp://ou63pmih66umazou.onion/inbox.comp.version-control.git nntp://czquwvybam4bgbro.onion/inbox.comp.version-control.git nntp://hjrcffqmbrq6wope.onion/inbox.comp.version-control.git nntp://news.gmane.io/gmane.comp.version-control.git note: .onion URLs require Tor: https://www.torproject.org/ code repositories for the project(s) associated with this inbox: https://80x24.org/mirrors/git.git AGPL code for this site: git clone https://public-inbox.org/public-inbox.git