From: Thomas Gummerer <firstname.lastname@example.org> To: Duy Nguyen <email@example.com> Cc: Git Mailing List <firstname.lastname@example.org>, Thomas Rast <email@example.com>, Michael Haggerty <firstname.lastname@example.org>, Junio C Hamano <email@example.com>, Robin Rosenberg <firstname.lastname@example.org> Subject: Re: [PATCH 5.5/22] Add documentation for the index api Date: Tue, 09 Jul 2013 22:10:07 +0200 [thread overview] Message-ID: <email@example.com> (raw) In-Reply-To: <CACsJy8A9+1O_em=FtV_TUKags4FrSggV76dd1h6gsJ+JHfjZKw@mail.gmail.com> Duy Nguyen <firstname.lastname@example.org> writes: > On Tue, Jul 9, 2013 at 3:54 AM, Thomas Gummerer <email@example.com> wrote: >> As promised, a draft for a documentation for the index api as it is in >> this series. > > First of all, it may be a good idea to acknowledge > index_state->cache as part of the API for now. Not hiding it > simplifies a few things (no need for new next_ce field, no worries > about rewinding in unpack-trees..). Supporting partial loading (and > maybe partial update in some cases) with this API and > index_state->cache part of the API are good enough for me. We can do > another tree-based API or something update later when it's formed (I > looked at your index-v5api branch but I don't think a tree-based api > was there, my concern is how much extra head pre-v5 has to pay to use > tree-based api). Yes, I think you're right, that simplifies everything a lot, while we still can have partial loading. Hiding index_state->cache was mainly thought for future changes for the in-memory format, but I think that will not be happening for a while. >> +`read_index_filtered(opts)`:: >> + This method behaves differently for index-v2 and index-v5. >> + >> + For index-v2 it simply reads the whole index as read_index() >> + does, so we are sure we don't have to reload anything if the >> + user wants a different filter. It also sets the filter_opts >> + in the index_state, which is used to limit the results when >> + iterating over the index with for_each_index_entry(). >> + >> + The whole index is read to avoid the need to eventually >> + re-read the index later, because the performance is no >> + different when reading it partially. >> + >> + For index-v5 it creates an adjusted_pathspec to filter the >> + reading. First all the directory entries are read and then >> + the cache_entries in the directories that match the adjusted >> + pathspec are read. The filter_opts in the index_state are set >> + to filter out the rest of the cache_entries that are matched >> + by the adjusted pathspec but not by the pathspec given. The >> + rest of the index entries are filtered out when iterating over >> + the cache with for_each_index_entries. > > You can state in the API that the input pathspec is used as a hint to > load only a portion of the index. read_index_filtered may load _more_ > than necessary. It's the caller's responsibility to verify again which > is matched and which is not. That's how read_directory is done. I > think it gives you more liberty in loading strategy. It's already true > for v2 because full index is loaded regardless of the given pathspec. > In the end, we have a linear list (from public view) of cache entries, > accessible via index_state->cache. Yes, and it's also partly true for index-v5, as the full content of a directory is loaded even if only some files it it match the pathspec that's given. > If you happen to know that certain entries match the given pathspec, > you could help the caller avoid match_pathspec'ing again by set a bit > in ce_flags. I currently don't know which entries do match the pathspec from just reading the index file, additional calls would be needed. I don't think that would be worth the overhead. > To know which entry exists in the index and which is > new, use another flag. Most reader code won't change if we do it this > way, all match_pathspec() remain where they are. Hrm you mean to know which cache entries are added (or changed) in the in-memory index and will have to be written later? I'm not sure I understand correctly what you mean here. >> +`for_each_index_entry(fn, cb_data)`:: >> + Iterates over all cache_entries in the index filtered by >> + filter_opts in the index_stat. For each cache entry fn is >> + executed with cb_data as callback data. From within the loop >> + do `return 0` to continue, or `return 1` to break the loop. > > Because we don't attempt to hide index_state->cache, this one may be > for convenience, the user is not required to convert to it. Actually I > think this may be slower because of the cost of calling function > pointer. Yes right, I think you're right. In fact I just tested it, and it's slightly slower. I still think it would make sense to keep it around, for the callers that want the cache filtered exactly by the filter_opts, for convenience as you said. >> +`next_index_entry(ce)`:: >> + Returns the cache_entry that follows after ce > > next_ce field and this method may be gone too, just access index_state->cache Yes, this makes no sense when we're not hiding index_state->cache. The same goes for the get_index_entry_by_name function, which is essentially the same as using index_name_pos and then getting the cache entry from index_state->cache. >> +`index_change_filter_opts(opts)`:: >> + This function again has a slightly different functionality for >> + index-v2 and index-v5. >> + >> + For index-v2 it simply changes the filter_opts, so >> + for_each_index_entry uses the changed index_opts, to iterate >> + over a different set of cache entries. >> + >> + For index-v5 it refreshes the index if the filter_opts have >> + changed and sets the new filter_opts in the index state, again >> + to iterate over a different set of cache entries as with >> + index-v2. >> + >> + This has some optimization potential, in the case that the >> + opts get stricter (less of the index should be read) it >> + doesn't have to reload anything, but currently does. > > The only use case I see so far is converting a partial index_state > back to a full one. Apart from doing so in order to write the new > index, I think some operation (like rename tracking in diff or > unpack-trees) may expect full index. I think we should support that. I > doubt we need to change pathspec to something different than the one > we used to load the index. When a user passes a pathspec to a command, > the user expects the command to operate on that set only, not outside. One application was in ls-files, where we strip the trailing slash from the pathspecs for submodules. But when we let the caller filter the rest out it's not needed anymore. We load all entries without the trailing slash anyway. > If you take the input pathspec at loading just as a hint, you could > load all related directory blocks and all files in those blocks, so > that expanding to full index is simply adding more files from missing > directory blocks (and their files). An advantage of not strictly > follow the input pathspec. I actually already do that with the adjusted pathspec. Even with index-v5 currently there are some more entries loaded than actually matched by the pathspecs. Expanding to the full index still takes some work, but should be possible. > Some thoughts about the writing api. > > In think we should avoid automatically converting partial index into a > full one before writing. Push that back to the caller and die() when > asked to update partial index. They know at what point the index may > be updated and even what part of it may be updated. I think all > commands fall into two categories, tree-wide updates (merge, > checkout...) and limited by the user-given pathspec. "what part to be > updated" is not so hard to determine. Hrm this is only true if index entries are added or removed, not if they are only changed. If they are only changed we can write a partially read index once we have partial writing. For now it would make sense to just die() though, until we have that in place. > If the caller promises not to update or read outside certain pathspec > (part of API), we don't really need to load full index until > write_index is called. At that point I think we also know what > directory blocks are completely untouched by the caller (by promise) > and could copy them over from the old index byte-by-byte (or something > close, some offsets may be recalculated). That may keep tree compiling > cost proportional to the number of changed entries, not the number of > entries in index. Yes that would make sense. I think that should go in a follow-up series though as it would be quite some work. > There is another partial write case that's not covered this round (or > was it discussed and discarded?): refreshing the index. This operation > could be treated as a standalone, special one: refresh and update the > index file directly without waiting until write_index is called. There > are some commands that follow this scheme by doing > update_index_if_able() after refresh_index(). Those will be cheaper > with v5 because we don't need write a full new index. I don't think it was discussed yet. Partial reading will need a change to the lock-file structure though, so I think it's a little more complicated. Thanks for your comments, I'll try to address them and send a new series in a couple of days.
next prev parent reply other threads:[~2013-07-09 20:10 UTC|newest] Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-07-07 8:11 [PATCH 00/22] Index v5 Thomas Gummerer 2013-07-07 8:11 ` [PATCH 01/22] t2104: Don't fail for index versions other than  Thomas Gummerer 2013-07-07 8:11 ` [PATCH 02/22] read-cache: split index file version specific functionality Thomas Gummerer 2013-07-07 8:11 ` [PATCH 03/22] read-cache: move index v2 specific functions to their own file Thomas Gummerer 2013-07-07 8:11 ` [PATCH 04/22] read-cache: Re-read index if index file changed Thomas Gummerer 2013-07-07 8:11 ` [PATCH 05/22] read-cache: add index reading api Thomas Gummerer 2013-07-08 2:01 ` Duy Nguyen 2013-07-08 11:40 ` Thomas Gummerer 2013-07-08 2:19 ` Duy Nguyen 2013-07-08 11:20 ` Thomas Gummerer 2013-07-08 12:45 ` Duy Nguyen 2013-07-08 13:37 ` Thomas Gummerer 2013-07-08 20:54 ` [PATCH 5.5/22] Add documentation for the index api Thomas Gummerer 2013-07-09 15:42 ` Duy Nguyen 2013-07-09 20:10 ` Thomas Gummerer [this message] 2013-07-10 5:28 ` Duy Nguyen 2013-07-11 11:30 ` Thomas Gummerer 2013-07-11 11:42 ` Duy Nguyen 2013-07-11 12:27 ` Duy Nguyen 2013-07-08 16:36 ` [PATCH 05/22] read-cache: add index reading api Junio C Hamano 2013-07-08 20:10 ` Thomas Gummerer 2013-07-08 23:09 ` Junio C Hamano 2013-07-09 20:13 ` Thomas Gummerer 2013-07-07 8:11 ` [PATCH 06/22] make sure partially read index is not changed Thomas Gummerer 2013-07-08 16:31 ` Junio C Hamano 2013-07-08 18:33 ` Thomas Gummerer 2013-07-07 8:11 ` [PATCH 07/22] dir.c: use index api Thomas Gummerer 2013-07-07 8:11 ` [PATCH 08/22] tree.c: " Thomas Gummerer 2013-07-07 8:11 ` [PATCH 09/22] name-hash.c: " Thomas Gummerer 2013-07-07 8:11 ` [PATCH 10/22] grep.c: Use " Thomas Gummerer 2013-07-07 8:11 ` [PATCH 11/22] ls-files.c: use the " Thomas Gummerer 2013-07-07 8:11 ` [PATCH 12/22] read-cache: make read_blob_data_from_index use " Thomas Gummerer 2013-07-07 8:11 ` [PATCH 13/22] documentation: add documentation of the index-v5 file format Thomas Gummerer 2013-07-11 10:39 ` Duy Nguyen 2013-07-11 11:39 ` Thomas Gummerer 2013-07-11 11:47 ` Duy Nguyen 2013-07-11 12:26 ` Thomas Gummerer 2013-07-11 12:50 ` Duy Nguyen 2013-07-07 8:11 ` [PATCH 14/22] read-cache: make in-memory format aware of stat_crc Thomas Gummerer 2013-07-07 8:11 ` [PATCH 15/22] read-cache: read index-v5 Thomas Gummerer 2013-07-07 20:18 ` Eric Sunshine 2013-07-08 11:40 ` Thomas Gummerer 2013-07-07 8:11 ` [PATCH 16/22] read-cache: read resolve-undo data Thomas Gummerer 2013-07-07 8:11 ` [PATCH 17/22] read-cache: read cache-tree in index-v5 Thomas Gummerer 2013-07-07 20:41 ` Eric Sunshine 2013-07-07 8:11 ` [PATCH 18/22] read-cache: write index-v5 Thomas Gummerer 2013-07-07 20:43 ` Eric Sunshine 2013-07-07 8:11 ` [PATCH 19/22] read-cache: write index-v5 cache-tree data Thomas Gummerer 2013-07-07 8:11 ` [PATCH 20/22] read-cache: write resolve-undo data for index-v5 Thomas Gummerer 2013-07-07 8:11 ` [PATCH 21/22] update-index.c: rewrite index when index-version is given Thomas Gummerer 2013-07-07 8:12 ` [PATCH 22/22] p0003-index.sh: add perf test for the index formats Thomas Gummerer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style List information: http://vger.kernel.org/majordomo-info.html * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --subject='Re: [PATCH 5.5/22] Add documentation for the index api' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
firstname.lastname@example.org list mirror (unofficial, one of many) This inbox may be cloned and mirrored by anyone: git clone --mirror https://public-inbox.org/git git clone --mirror http://ou63pmih66umazou.onion/git git clone --mirror http://czquwvybam4bgbro.onion/git git clone --mirror http://hjrcffqmbrq6wope.onion/git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V1 git git/ https://public-inbox.org/git \ email@example.com public-inbox-index git Example config snippet for mirrors. Newsgroups are available over NNTP: nntp://news.public-inbox.org/inbox.comp.version-control.git nntp://7fh6tueqddpjyxjmgtdiueylzoqt6pt7hec3pukyptlmohoowvhde4yd.onion/inbox.comp.version-control.git nntp://ie5yzdi7fg72h7s4sdcztq5evakq23rdt33mfyfcddc5u3ndnw24ogqd.onion/inbox.comp.version-control.git nntp://4uok3hntl7oi7b4uf4rtfwefqeexfzil2w6kgk2jn5z2f764irre7byd.onion/inbox.comp.version-control.git nntp://news.gmane.io/gmane.comp.version-control.git note: .onion URLs require Tor: https://www.torproject.org/ code repositories for project(s) associated with this inbox: https://80x24.org/mirrors/git.git AGPL code for this site: git clone https://public-inbox.org/public-inbox.git