From: "Jakub Narębski" <jnareb@gmail.com>
To: "Abhishek Kumar via GitGitGadget" <gitgitgadget@gmail.com>
Cc: git@vger.kernel.org, Derrick Stolee <stolee@gmail.com>,
Taylor Blau <me@ttaylorr.com>,
Abhishek Kumar <abhishekkumar8222@gmail.com>
Subject: Re: [PATCH v4 07/10] commit-graph: implement generation data chunk
Date: Fri, 30 Oct 2020 13:45:29 +0100 [thread overview]
Message-ID: <854kmbx4pi.fsf@gmail.com> (raw)
In-Reply-To: <b903efe2ea11bc0b7e1ef8f239ed34f72caa4f03.1602079786.git.gitgitgadget@gmail.com> (Abhishek Kumar via GitGitGadget's message of "Wed, 07 Oct 2020 14:09:42 +0000")
Tl;dr summary: the code writing GDOV chunk could be made more performant
(I think), but that could be left for the future commit.
"Abhishek Kumar via GitGitGadget" <gitgitgadget@gmail.com> writes:
> From: Abhishek Kumar <abhishekkumar8222@gmail.com>
>
> As discovered by Ævar, we cannot increment graph version to
> distinguish between generation numbers v1 and v2 [1]. Thus, one of
> pre-requistes before implementing generation number was to distinguish
> between graph versions in a backwards compatible manner.
Minor nitpick: I think you meant "implementing generation number v2",
to be more precise.
>
> We are going to introduce a new chunk called Generation Data chunk (or
Very minor nitpick: perhaps s/Generation Data/Generation DATa/, to provide
mnemonics for chunk name.
> GDAT). GDAT stores corrected committer date offsets whereas CDAT will
> still store topological level.
Minor nitpick: I think the second sentence should use consistent
grammatical tense (but I am not a native English speaker); also
s/level/levels/:
GDAT will store corrected committer date offsets, whereas CDAT will
still store topological levels.
But it is perfectly understandable as it is.
>
> Old Git does not understand GDAT chunk and would ignore it, reading
> topological levels from CDAT. New Git can parse GDAT and take advantage
> of newer generation numbers, falling back to topological levels when
> GDAT chunk is missing (as it would happen with a commit graph written
> by old Git).
Minor nitpick: I think we use commit-graph with dash when writing about
the commit-graph file, like below.
>
> We introduce a test environment variable 'GIT_TEST_COMMIT_GRAPH_NO_GDAT'
> which forces commit-graph file to be written without generation data
> chunk to emulate a commit-graph file written by old Git.
All right.
>
> While storing corrected commit date offset instead of the corrected
> commit date saves us 4 bytes per commit, it's possible for the offsets
> to overflow the 4-bytes allocated. As such overflows are exceedingly
> rare, we use the following overflow management scheme:
Perhaps it would be good idea to write the idea in full from start, as
the commit message is intended to be read stadalone and not in the
context of the patch series. On the other hand it might be too much
detail in already [necessarily] lengthty commit message.
Perhaps something like the following proposal would read better.
To minimize the space required to store corrected commit date, Git
stores corrected commit date offsets into the commit-graph file,
instead of corrected commit dates themselves. This saves us 4 bytes
per commit, decreasing the GDAT chunk size by half, but it's possible
for the offset to overflow the 4-bytes allocated for storage. As such
overflows are and should be exceedingly rare, we use the following
overflow management scheme:
NOTE: this overflow handling is a *new* code (or new-ish code, as it is
inspired and similar to EDGE chunk data handling), so it needs more
careful review.
>
> We introduce a new commit-graph chunk, GENERATION_DATA_OVERFLOW ('GDOV')
Minor issue: why GENERATION_DATA_OVERFLOW and not Generation Data
OVerflow, like for the GDAT chunk?
> to store corrected commit dates for commits with offsets greater than
> GENERATION_NUMBER_V2_OFFSET_MAX.
>
> If the offset is greater than GENERATION_NUMBER_V2_OFFSET_MAX, we set
> the MSB of the offset and the other bits store the position of corrected
> commit date in GDOV chunk, similar to how Extra Edge List is maintained.
>
> We test the overflow-related code with the following repo history:
>
> F - N - U
> / \
> U - N - U N
> \ /
> N - F - N
Do we need such complex history? I guess we need to test the handling of
merge commits too.
>
> Where the commits denoted by U have committer date of zero seconds
> since Unix epoch, the commits denoted by N have committer date of
> 1112354055 (default committer date for the test suite) seconds since
> Unix epoch and the commits denoted by F have committer date of
> (2 ^ 31 - 2) seconds since Unix epoch.
>
> The largest offset observed is 2 ^ 31, just large enough to overflow.
>
> [1]: https://lore.kernel.org/git/87a7gdspo4.fsf@evledraar.gmail.com/
>
> Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
> ---
> commit-graph.c | 98 +++++++++++++++++++++++++++++++++--
> commit-graph.h | 3 ++
> commit.h | 1 +
> t/README | 3 ++
> t/helper/test-read-graph.c | 4 ++
> t/t4216-log-bloom.sh | 4 +-
> t/t5318-commit-graph.sh | 70 ++++++++++++++++++++-----
> t/t5324-split-commit-graph.sh | 12 ++---
> t/t6600-test-reach.sh | 68 +++++++++++++-----------
> 9 files changed, 206 insertions(+), 57 deletions(-)
>
> diff --git a/commit-graph.c b/commit-graph.c
> index 03948adfce..71d0b243db 100644
> --- a/commit-graph.c
> +++ b/commit-graph.c
> @@ -38,11 +38,13 @@ void git_test_write_commit_graph_or_die(void)
> #define GRAPH_CHUNKID_OIDFANOUT 0x4f494446 /* "OIDF" */
> #define GRAPH_CHUNKID_OIDLOOKUP 0x4f49444c /* "OIDL" */
> #define GRAPH_CHUNKID_DATA 0x43444154 /* "CDAT" */
> +#define GRAPH_CHUNKID_GENERATION_DATA 0x47444154 /* "GDAT" */
> +#define GRAPH_CHUNKID_GENERATION_DATA_OVERFLOW 0x47444f56 /* "GDOV" */
> #define GRAPH_CHUNKID_EXTRAEDGES 0x45444745 /* "EDGE" */
> #define GRAPH_CHUNKID_BLOOMINDEXES 0x42494458 /* "BIDX" */
> #define GRAPH_CHUNKID_BLOOMDATA 0x42444154 /* "BDAT" */
> #define GRAPH_CHUNKID_BASE 0x42415345 /* "BASE" */
> -#define MAX_NUM_CHUNKS 7
> +#define MAX_NUM_CHUNKS 9
All right.
>
> #define GRAPH_DATA_WIDTH (the_hash_algo->rawsz + 16)
>
> @@ -61,6 +63,8 @@ void git_test_write_commit_graph_or_die(void)
> #define GRAPH_MIN_SIZE (GRAPH_HEADER_SIZE + 4 * GRAPH_CHUNKLOOKUP_WIDTH \
> + GRAPH_FANOUT_SIZE + the_hash_algo->rawsz)
>
> +#define CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW (1ULL << 31)
> +
All right, though the naming convention is different from the one used
for EDGE chunk: GRAPH_EXTRA_EDGES_NEEDED and GRAPH_EDGE_LAST_MASK.
> /* Remember to update object flag allocation in object.h */
> #define REACHABLE (1u<<15)
>
> @@ -385,6 +389,20 @@ struct commit_graph *parse_commit_graph(struct repository *r,
> graph->chunk_commit_data = data + chunk_offset;
> break;
>
> + case GRAPH_CHUNKID_GENERATION_DATA:
> + if (graph->chunk_generation_data)
> + chunk_repeated = 1;
> + else
> + graph->chunk_generation_data = data + chunk_offset;
> + break;
> +
> + case GRAPH_CHUNKID_GENERATION_DATA_OVERFLOW:
> + if (graph->chunk_generation_data_overflow)
> + chunk_repeated = 1;
> + else
> + graph->chunk_generation_data_overflow = data + chunk_offset;
> + break;
> +
Necessary but unavoidable boilerplate for adding new chunks to the
commit-graph file format. All right.
> case GRAPH_CHUNKID_EXTRAEDGES:
> if (graph->chunk_extra_edges)
> chunk_repeated = 1;
> @@ -745,8 +763,8 @@ static void fill_commit_graph_info(struct commit *item, struct commit_graph *g,
> {
> const unsigned char *commit_data;
> struct commit_graph_data *graph_data;
> - uint32_t lex_index;
> - uint64_t date_high, date_low;
> + uint32_t lex_index, offset_pos;
> + uint64_t date_high, date_low, offset;
All right, we are adding two new variables: `offset` to read data stored
in GDAT chunk, and `offset_pos` to help read data from GDOV chunk if
necessary i.e. to handle overflow in corrected commit data offset
storage.
>
> while (pos < g->num_commits_in_base)
> g = g->base_graph;
> @@ -764,7 +782,16 @@ static void fill_commit_graph_info(struct commit *item, struct commit_graph *g,
> date_low = get_be32(commit_data + g->hash_len + 12);
> item->date = (timestamp_t)((date_high << 32) | date_low);
>
> - graph_data->generation = get_be32(commit_data + g->hash_len + 8) >> 2;
> + if (g->chunk_generation_data) {
> + offset = (timestamp_t) get_be32(g->chunk_generation_data + sizeof(uint32_t) * lex_index);
Style: why space after the `(timestamp_t)` cast operator?
Though CodingGuidelines do not say anything on this topic... perhaps the
space after cast operator makes it more readable?
> +
> + if (offset & CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW) {
All right, so the CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW is equivalent of
GRAPH_EXTRA_EDGES_NEEDED.
> + offset_pos = offset ^ CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW;
Hmmm... instead of using bitwise and on an equivalent to the
GRAPH_EDGE_LAST_MASK, we utilize the fact that we know that the MSB bit
is set, so we can clear it with bitwise xor. Clever trick.
> + graph_data->generation = get_be64(g->chunk_generation_data_overflow + 8 * offset_pos);
> + } else
> + graph_data->generation = item->date + offset;
All right, this handles the case when we have generation number v2, with
or without overflow.
> + } else
> + graph_data->generation = get_be32(commit_data + g->hash_len + 8) >> 2;
All right, this handles the case where we have only generation number
v1, like for commit-graph file written by old Git.
>
> if (g->topo_levels)
> *topo_level_slab_at(g->topo_levels, item) = get_be32(commit_data + g->hash_len + 8) >> 2;
> @@ -942,6 +969,7 @@ struct write_commit_graph_context {
> struct packed_oid_list oids;
> struct packed_commit_list commits;
> int num_extra_edges;
> + int num_generation_data_overflows;
> unsigned long approx_nr_objects;
> struct progress *progress;
> int progress_done;
> @@ -960,7 +988,8 @@ struct write_commit_graph_context {
> report_progress:1,
> split:1,
> changed_paths:1,
> - order_by_pack:1;
> + order_by_pack:1,
> + write_generation_data:1;
>
> struct topo_level_slab *topo_levels;
> const struct commit_graph_opts *opts;
All right, this adds necessary fields to `struct write_commit_graph_context`.
> @@ -1120,6 +1149,44 @@ static int write_graph_chunk_data(struct hashfile *f,
> return 0;
> }
>
> +static int write_graph_chunk_generation_data(struct hashfile *f,
> + struct write_commit_graph_context *ctx)
> +{
> + int i, num_generation_data_overflows = 0;
Minor nitpick: in my opinion there should be empty line here, between
the variables declaration and the code... however not all
write_graph_chunk_*() functions have it.
> + for (i = 0; i < ctx->commits.nr; i++) {
> + struct commit *c = ctx->commits.list[i];
> + timestamp_t offset = commit_graph_data_at(c)->generation - c->date;
> + display_progress(ctx->progress, ++ctx->progress_cnt);
All right.
> +
> + if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
> + offset = CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW | num_generation_data_overflows;
> + num_generation_data_overflows++;
> + }
Hmmm... shouldn't we store these commits that need overflow handling
(with corrected commit date offset greater than GENERATION_NUMBER_V2_OFFSET_MAX)
in a list or a queue, to remember them for writing GDOV chunk?
We could store oids, or we could store commits themselves, for example:
if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
offset = CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW | num_generation_data_overflows;
num_generation_data_overflows++;
ALLOC_GROW(ctx->gdov_commits.list, ctx->gdov_commits.nr + 1, ctx->gdov_commits.alloc);
ctx->commits.list[ctx->gdov_commits.nr] = c;
ctx->gdov_commits.nr++;
}
Though in the above proposal we could get rid of `num_generation_data_overflows`,
as it should be the same as `ctx->gdov_commits.nr`.
I have called the extra commit list member of write_commit_graph_context
`gdov_commits`, but perhaps a better name would be `commits_gen_v2_overflow`,
or similar more descriptive name.
> +
> + hashwrite_be32(f, offset);
> + }
> +
> + return 0;
> +}
All right.
> +
> +static int write_graph_chunk_generation_data_overflow(struct hashfile *f,
> + struct write_commit_graph_context *ctx)
> +{
> + int i;
> + for (i = 0; i < ctx->commits.nr; i++) {
Here we loop over *all* commits again, instead of looping over those
very rare commits that need overflow handling for their corrected commit
date data.
Though this possible performance issue^* could be fixed in the future commit.
*) It needs to be actually benchmarked which version is faster.
With the change proposed above (and required changes to the `struct
write_commit_graph_context`) it could look like this:
for (i = 0; i < ctx->gcov_commits.nr; i++) {
> + struct commit *c = ctx->commits.list[i];
> + timestamp_t offset = commit_graph_data_at(c)->generation - c->date;
> + display_progress(ctx->progress, ++ctx->progress_cnt);
> +
> + if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
> + hashwrite_be32(f, offset >> 32);
> + hashwrite_be32(f, (uint32_t) offset);
> + }
> + }
The above would be as simple as the following:
struct commit *c = ctx->gcov_commits.list[i];
timestamp_t offset = commit_graph_data_at(c)->generation - c->date;
display_progress(ctx->progress, ++ctx->progress_cnt);
hashwrite_be64(f, offset);
Assumming that there would be hashwrite_be64(), it would be the
following otherwise:
hashwrite_be32(f, offset >> 32);
hashwrite_be32(f, (uint32_t)offset);
> +
> + return 0;
> +}
> +
> static int write_graph_chunk_extra_edges(struct hashfile *f,
> struct write_commit_graph_context *ctx)
> {
> @@ -1399,7 +1466,11 @@ static void compute_generation_numbers(struct write_commit_graph_context *ctx)
>
> if (current->date && current->date > max_corrected_commit_date)
> max_corrected_commit_date = current->date - 1;
> +
This is a bit unrelated change, adding this empty line.
> commit_graph_data_at(current)->generation = max_corrected_commit_date + 1;
> +
> + if (commit_graph_data_at(current)->generation - current->date > GENERATION_NUMBER_V2_OFFSET_MAX)
> + ctx->num_generation_data_overflows++;
All right, we need to track number of commits that need overflow
handling for generation number v2 to know what size GDOV chunk would
need to be.
> }
> }
> }
> @@ -1765,6 +1836,21 @@ static int write_commit_graph_file(struct write_commit_graph_context *ctx)
> chunks[2].id = GRAPH_CHUNKID_DATA;
> chunks[2].size = (hashsz + 16) * ctx->commits.nr;
> chunks[2].write_fn = write_graph_chunk_data;
> +
> + if (git_env_bool(GIT_TEST_COMMIT_GRAPH_NO_GDAT, 0))
> + ctx->write_generation_data = 0;
All right, here we handle GIT_TEST_COMMIT_GRAPH_NO_GDAT.
> + if (ctx->write_generation_data) {
> + chunks[num_chunks].id = GRAPH_CHUNKID_GENERATION_DATA;
> + chunks[num_chunks].size = sizeof(uint32_t) * ctx->commits.nr;
> + chunks[num_chunks].write_fn = write_graph_chunk_generation_data;
> + num_chunks++;
> + }
All right, the GDAT chunk consist of <number of commits> entries.
> + if (ctx->num_generation_data_overflows) {
> + chunks[num_chunks].id = GRAPH_CHUNKID_GENERATION_DATA_OVERFLOW;
> + chunks[num_chunks].size = sizeof(timestamp_t) * ctx->num_generation_data_overflows;
> + chunks[num_chunks].write_fn = write_graph_chunk_generation_data_overflow;
> + num_chunks++;
> + }
All right, that's what num_generation_data_overflows was for.
> if (ctx->num_extra_edges) {
> chunks[num_chunks].id = GRAPH_CHUNKID_EXTRAEDGES;
> chunks[num_chunks].size = 4 * ctx->num_extra_edges;
> @@ -2170,6 +2256,8 @@ int write_commit_graph(struct object_directory *odb,
> ctx->split = flags & COMMIT_GRAPH_WRITE_SPLIT ? 1 : 0;
> ctx->opts = opts;
> ctx->total_bloom_filter_data_size = 0;
> + ctx->write_generation_data = 1;
> + ctx->num_generation_data_overflows = 0;
>
> bloom_settings.bits_per_entry = git_env_ulong("GIT_TEST_BLOOM_SETTINGS_BITS_PER_ENTRY",
> bloom_settings.bits_per_entry);
> diff --git a/commit-graph.h b/commit-graph.h
> index 2e9aa7824e..19a02001fd 100644
> --- a/commit-graph.h
> +++ b/commit-graph.h
> @@ -6,6 +6,7 @@
> #include "oidset.h"
>
> #define GIT_TEST_COMMIT_GRAPH "GIT_TEST_COMMIT_GRAPH"
> +#define GIT_TEST_COMMIT_GRAPH_NO_GDAT "GIT_TEST_COMMIT_GRAPH_NO_GDAT"
> #define GIT_TEST_COMMIT_GRAPH_DIE_ON_PARSE "GIT_TEST_COMMIT_GRAPH_DIE_ON_PARSE"
> #define GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS "GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS"
>
> @@ -68,6 +69,8 @@ struct commit_graph {
> const uint32_t *chunk_oid_fanout;
> const unsigned char *chunk_oid_lookup;
> const unsigned char *chunk_commit_data;
> + const unsigned char *chunk_generation_data;
> + const unsigned char *chunk_generation_data_overflow;
All right, two new chunks: GDAT and GDOV.
> const unsigned char *chunk_extra_edges;
> const unsigned char *chunk_base_graphs;
> const unsigned char *chunk_bloom_indexes;
> diff --git a/commit.h b/commit.h
> index 33c66b2177..251d877fcf 100644
> --- a/commit.h
> +++ b/commit.h
> @@ -14,6 +14,7 @@
> #define GENERATION_NUMBER_INFINITY ((1ULL << 63) - 1)
> #define GENERATION_NUMBER_V1_MAX 0x3FFFFFFF
> #define GENERATION_NUMBER_ZERO 0
> +#define GENERATION_NUMBER_V2_OFFSET_MAX ((1ULL << 31) - 1)
Should we use this form, or hexadecimal constant?
#define GENERATION_NUMBER_V2_OFFSET_MAX 0x7FFFFFFF
But I think the current definition is more explicit: all bits set to one
except for the most significant digit. All right.
>
> struct commit_list {
> struct commit *item;
> diff --git a/t/README b/t/README
> index 2adaf7c2d2..975c054bc9 100644
> --- a/t/README
> +++ b/t/README
> @@ -379,6 +379,9 @@ GIT_TEST_COMMIT_GRAPH=<boolean>, when true, forces the commit-graph to
> be written after every 'git commit' command, and overrides the
> 'core.commitGraph' setting to true.
>
> +GIT_TEST_COMMIT_GRAPH_NO_GDAT=<boolean>, when true, forces the
> +commit-graph to be written without generation data chunk.
> +
All right. Nice have it documented.
> GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=<boolean>, when true, forces
> commit-graph write to compute and write changed path Bloom filters for
> every 'git commit-graph write', as if the `--changed-paths` option was
> diff --git a/t/helper/test-read-graph.c b/t/helper/test-read-graph.c
> index 5f585a1725..75927b2c81 100644
> --- a/t/helper/test-read-graph.c
> +++ b/t/helper/test-read-graph.c
> @@ -33,6 +33,10 @@ int cmd__read_graph(int argc, const char **argv)
> printf(" oid_lookup");
> if (graph->chunk_commit_data)
> printf(" commit_metadata");
> + if (graph->chunk_generation_data)
> + printf(" generation_data");
> + if (graph->chunk_generation_data_overflow)
> + printf(" generation_data_overflow");
> if (graph->chunk_extra_edges)
> printf(" extra_edges");
> if (graph->chunk_bloom_indexes)
All right, updating `test-tool read-graph` with new chunks.
> diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
> index d11040ce41..dbde016188 100755
> --- a/t/t4216-log-bloom.sh
> +++ b/t/t4216-log-bloom.sh
> @@ -40,11 +40,11 @@ test_expect_success 'setup test - repo, commits, commit graph, log outputs' '
> '
>
> graph_read_expect () {
> - NUM_CHUNKS=5
> + NUM_CHUNKS=6
> cat >expect <<- EOF
Sidenote: I have just noticed this, and as I see it is not something you
wrote, but usually we write it with no space after the dash and before
'EOF':
cat >expect <<-EOF
> header: 43475048 1 $(test_oid oid_version) $NUM_CHUNKS 0
> num_commits: $1
> - chunks: oid_fanout oid_lookup commit_metadata bloom_indexes bloom_data
> + chunks: oid_fanout oid_lookup commit_metadata generation_data bloom_indexes bloom_data
> EOF
> test-tool read-graph >actual &&
> test_cmp expect actual
All right, updating expect value for `test-tool read-graph` in the usual
case, with generation number chunk.
> diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh
> index 2ed0c1544d..0328e98564 100755
> --- a/t/t5318-commit-graph.sh
> +++ b/t/t5318-commit-graph.sh
> @@ -76,7 +76,7 @@ graph_git_behavior 'no graph' full commits/3 commits/1
> graph_read_expect() {
> OPTIONAL=""
> NUM_CHUNKS=3
> - if test ! -z $2
> + if test ! -z "$2"
All right, that is straighforward fix, which is now needed.
> then
> OPTIONAL=" $2"
> NUM_CHUNKS=$((3 + $(echo "$2" | wc -w)))
> @@ -103,14 +103,14 @@ test_expect_success 'exit with correct error on bad input to --stdin-commits' '
> # valid commit and tree OID
> git rev-parse HEAD HEAD^{tree} >in &&
> git commit-graph write --stdin-commits <in &&
> - graph_read_expect 3
> + graph_read_expect 3 generation_data
> '
>
> test_expect_success 'write graph' '
> cd "$TRASH_DIRECTORY/full" &&
> git commit-graph write &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "3"
> + graph_read_expect "3" generation_data
> '
>
> test_expect_success POSIXPERM 'write graph has correct permissions' '
> @@ -219,7 +219,7 @@ test_expect_success 'write graph with merges' '
> cd "$TRASH_DIRECTORY/full" &&
> git commit-graph write &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "10" "extra_edges"
> + graph_read_expect "10" "generation_data extra_edges"
> '
>
> graph_git_behavior 'merge 1 vs 2' full merge/1 merge/2
> @@ -254,7 +254,7 @@ test_expect_success 'write graph with new commit' '
> cd "$TRASH_DIRECTORY/full" &&
> git commit-graph write &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "11" "extra_edges"
> + graph_read_expect "11" "generation_data extra_edges"
> '
>
> graph_git_behavior 'full graph, commit 8 vs merge 1' full commits/8 merge/1
> @@ -264,7 +264,7 @@ test_expect_success 'write graph with nothing new' '
> cd "$TRASH_DIRECTORY/full" &&
> git commit-graph write &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "11" "extra_edges"
> + graph_read_expect "11" "generation_data extra_edges"
> '
>
> graph_git_behavior 'cleared graph, commit 8 vs merge 1' full commits/8 merge/1
> @@ -274,7 +274,7 @@ test_expect_success 'build graph from latest pack with closure' '
> cd "$TRASH_DIRECTORY/full" &&
> cat new-idx | git commit-graph write --stdin-packs &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "9" "extra_edges"
> + graph_read_expect "9" "generation_data extra_edges"
> '
>
> graph_git_behavior 'graph from pack, commit 8 vs merge 1' full commits/8 merge/1
> @@ -287,7 +287,7 @@ test_expect_success 'build graph from commits with closure' '
> git rev-parse merge/1 >>commits-in &&
> cat commits-in | git commit-graph write --stdin-commits &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "6"
> + graph_read_expect "6" "generation_data"
> '
>
> graph_git_behavior 'graph from commits, commit 8 vs merge 1' full commits/8 merge/1
> @@ -297,7 +297,7 @@ test_expect_success 'build graph from commits with append' '
> cd "$TRASH_DIRECTORY/full" &&
> git rev-parse merge/3 | git commit-graph write --stdin-commits --append &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "10" "extra_edges"
> + graph_read_expect "10" "generation_data extra_edges"
> '
>
> graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1
> @@ -307,7 +307,7 @@ test_expect_success 'build graph using --reachable' '
> cd "$TRASH_DIRECTORY/full" &&
> git commit-graph write --reachable &&
> test_path_is_file $objdir/info/commit-graph &&
> - graph_read_expect "11" "extra_edges"
> + graph_read_expect "11" "generation_data extra_edges"
> '
>
> graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1
> @@ -328,7 +328,7 @@ test_expect_success 'write graph in bare repo' '
> cd "$TRASH_DIRECTORY/bare" &&
> git commit-graph write &&
> test_path_is_file $baredir/info/commit-graph &&
> - graph_read_expect "11" "extra_edges"
> + graph_read_expect "11" "generation_data extra_edges"
> '
All those just add "generation_data" (aka GDAT) to expected chunks. All
right.
>
> graph_git_behavior 'bare repo with graph, commit 8 vs merge 1' bare commits/8 merge/1
> @@ -454,8 +454,9 @@ test_expect_success 'warn on improper hash version' '
>
> test_expect_success 'git commit-graph verify' '
> cd "$TRASH_DIRECTORY/full" &&
> - git rev-parse commits/8 | git commit-graph write --stdin-commits &&
> - git commit-graph verify >output
> + git rev-parse commits/8 | GIT_TEST_COMMIT_GRAPH_NO_GDAT=1 git commit-graph write --stdin-commits &&
> + git commit-graph verify >output &&
All right, this simply adds GIT_TEST_COMMIT_GRAPH_NO_GDAT=1. I assume
this is needed because this test is also setup for the following commits
_without_ even saying that in the test name (bad practice, in my
opinion), and the comment above this test says the following:
# the verify tests below expect the commit-graph to contain
# exactly the commits reachable from the commits/8 branch.
# If the file changes the set of commits in the list, then the
# offsets into the binary file will result in different edits
# and the tests will likely break.
So the following tests are fragile (though perhaps unavoidably fragile),
and without this change they would not work, I assume.
> + graph_read_expect 9 extra_edges
I guess that this is here to check that GIT_TEST_COMMIT_GRAPH_NO_GDAT=1
work as intended, and that the following "verify" tests wouldn't break.
I understand its necessity, even if I don't quite like having a test
that checks multiple things. This is a minor issue, though.
All right.
We might want to have a separate test that checks that we get
commit-graph with and without GDAT chunk depending on whether we use
GIT_TEST_COMMIT_GRAPH_NO_GDAT=1. On the other hand, this environment
variable is there purely for tests, so the question is should we test
the test infrastructure?
> '
>
> NUM_COMMITS=9
> @@ -741,4 +742,47 @@ test_expect_success 'corrupt commit-graph write (missing tree)' '
> )
> '
>
> +test_commit_with_date() {
> + file="$1.t" &&
> + echo "$1" >"$file" &&
> + git add "$file" &&
> + GIT_COMMITTER_DATE="$2" GIT_AUTHOR_DATE="$2" git commit -m "$1"
> + git tag "$1"
> +}
Here we add a helper function. All right.
I wonder though if it wouldn't be a better idea to add `--date <date>`
option to the test_commit() function in test-lib-functions.sh (which
option would set GIT_COMMITTER_DATE and GIT_AUTHOR_DATE, and also
set notick=yes).
For example:
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh
index f1ae935fee..a1f9a2b09b 100644
--- a/t/test-lib-functions.sh
+++ b/t/test-lib-functions.sh
@@ -202,6 +202,12 @@ test_commit () {
--signoff)
signoff="$1"
;;
+ --date)
+ notick=yes
+ GIT_COMMITTER_DATE="$2"
+ GIT_AUTHOR_DATE="$2"
+ shift
+ ;;
-C)
indir="$2"
shift
> +
It would be nice to have there comment describing the shape of the
revision history we generate here, that currenly is present only in the
commmit message.
# We test the overflow-related code with the following repo history:
#
# 4:F - 5:N - 6:U
# / \
# 1:U - 2:N - 3:U M:N
# \ /
# 7:N - 8:F - 9:N
#
# Here the commits denoted by U have committer date of zero seconds
# since Unix epoch, the commits denoted by N have committer date
# starting from 1112354055 seconds since Unix epoch (default committer
# date for the test suite), and the commits denoted by F have committer
# date of (2 ^ 31 - 2) seconds since Unix epoch.
#
# The largest offset observed is 2 ^ 31, just large enough to overflow.
#
> +test_expect_success 'overflow corrected commit date offset' '
> + objdir=".git/objects" &&
> + UNIX_EPOCH_ZERO="1970-01-01 00:00 +0000" &&
> + FUTURE_DATE="@2147483646 +0000" &&
It is a bit funny to see UNIX_EPOCH_ZERO spelled one way, and
FUTURE_DATE other way.
Wouldn't be more readable to use UNIX_EPOCH_ZERO="@0 +0000"?
> + test_oid_cache <<-EOF &&
> + oid_version sha1:1
> + oid_version sha256:2
> + EOF
> + cd "$TRASH_DIRECTORY" &&
> + mkdir repo &&
> + cd repo &&
> + git init &&
> + test_commit_with_date 1 "$UNIX_EPOCH_ZERO" &&
> + test_commit 2 &&
> + test_commit_with_date 3 "$UNIX_EPOCH_ZERO" &&
> + git commit-graph write --reachable &&
> + graph_read_expect 3 generation_data &&
> + test_commit_with_date 4 "$FUTURE_DATE" &&
> + test_commit 5 &&
> + test_commit_with_date 6 "$UNIX_EPOCH_ZERO" &&
> + git branch left &&
> + git reset --hard 3 &&
> + test_commit 7 &&
> + test_commit_with_date 8 "$FUTURE_DATE" &&
> + test_commit 9 &&
> + git branch right &&
> + git reset --hard 3 &&
> + git merge left right &&
We have test_merge() function in test-lib-functions.sh, perhaps we
should use it here.
> + git commit-graph write --reachable &&
> + graph_read_expect 10 "generation_data generation_data_overflow" &&
All right, we write the commit-graph and check that it has both GDAT and
GDOV chunks present.
> + git commit-graph verify
All right, we checks that created commit graph with GDAT and GDOV passes
'git commit-graph verify` checks.
> +'
> +
> +graph_git_behavior 'overflow corrected commit date offset' repo left right
All right, here we compare the Git behavior with the commit-graph to the
behavior without it... however I think that those two tests really
should have distinct (different) test names. Currently they both use
'overflow corrected commit date offset'.
> +
> test_done
> diff --git a/t/t5324-split-commit-graph.sh b/t/t5324-split-commit-graph.sh
> index c334ee9155..651df89ab2 100755
> --- a/t/t5324-split-commit-graph.sh
> +++ b/t/t5324-split-commit-graph.sh
> @@ -13,11 +13,11 @@ test_expect_success 'setup repo' '
> infodir=".git/objects/info" &&
> graphdir="$infodir/commit-graphs" &&
> test_oid_cache <<-EOM
> - shallow sha1:1760
> - shallow sha256:2064
> + shallow sha1:2132
> + shallow sha256:2436
>
> - base sha1:1376
> - base sha256:1496
> + base sha1:1408
> + base sha256:1528
>
> oid_version sha1:1
> oid_version sha256:2
> @@ -31,9 +31,9 @@ graph_read_expect() {
> NUM_BASE=$2
> fi
> cat >expect <<- EOF
> - header: 43475048 1 $(test_oid oid_version) 3 $NUM_BASE
> + header: 43475048 1 $(test_oid oid_version) 4 $NUM_BASE
> num_commits: $1
> - chunks: oid_fanout oid_lookup commit_metadata
> + chunks: oid_fanout oid_lookup commit_metadata generation_data
> EOF
> test-tool read-graph >output &&
> test_cmp expect output
All right, we now expect the commit graph to include the GDAT chunk...
though shouldn't be there old expected value for no GDAT, for future
tests? But perhaps this is not necessary.
Note that I have not checked the details, but it looks OK to me.
> diff --git a/t/t6600-test-reach.sh b/t/t6600-test-reach.sh
> index f807276337..e2d33a8a4c 100755
> --- a/t/t6600-test-reach.sh
> +++ b/t/t6600-test-reach.sh
> @@ -55,10 +55,13 @@ test_expect_success 'setup' '
> git show-ref -s commit-5-5 | git commit-graph write --stdin-commits &&
> mv .git/objects/info/commit-graph commit-graph-half &&
> chmod u+w commit-graph-half &&
> + GIT_TEST_COMMIT_GRAPH_NO_GDAT=1 git commit-graph write --reachable &&
> + mv .git/objects/info/commit-graph commit-graph-no-gdat &&
> + chmod u+w commit-graph-no-gdat &&
All right, this prepares for testing one more mode. The run_all_modes()
function would test the following cases:
- no commit-graph
- commit-graph for all commits, with GDAT
- commit-graph with half of commits, with GDAT
- commit-graph for all commits, without GDAT
> git config core.commitGraph true
> '
>
> -run_three_modes () {
> +run_all_modes () {
> test_when_finished rm -rf .git/objects/info/commit-graph &&
> "$@" <input >actual &&
> test_cmp expect actual &&
> @@ -67,11 +70,14 @@ run_three_modes () {
> test_cmp expect actual &&
> cp commit-graph-half .git/objects/info/commit-graph &&
> "$@" <input >actual &&
> + test_cmp expect actual &&
> + cp commit-graph-no-gdat .git/objects/info/commit-graph &&
> + "$@" <input >actual &&
> test_cmp expect actual
> }
>
> -test_three_modes () {
> - run_three_modes test-tool reach "$@"
> +test_all_modes () {
> + run_all_modes test-tool reach "$@"
> }
All right.
Though to reduce "noise" in this patch, the rename of run_three_modes()
to run_all_modes() and test_three_modes() to test_all_modes() could have
been done in a separate preparatory patch. It would be pure refactoring
patch, without introducing any new functionality.
>
> test_expect_success 'ref_newer:miss' '
> @@ -80,7 +86,7 @@ test_expect_success 'ref_newer:miss' '
> B:commit-4-9
> EOF
> echo "ref_newer(A,B):0" >expect &&
> - test_three_modes ref_newer
> + test_all_modes ref_newer
> '
>
> test_expect_success 'ref_newer:hit' '
> @@ -89,7 +95,7 @@ test_expect_success 'ref_newer:hit' '
> B:commit-2-3
> EOF
> echo "ref_newer(A,B):1" >expect &&
> - test_three_modes ref_newer
> + test_all_modes ref_newer
> '
>
> test_expect_success 'in_merge_bases:hit' '
> @@ -98,7 +104,7 @@ test_expect_success 'in_merge_bases:hit' '
> B:commit-8-8
> EOF
> echo "in_merge_bases(A,B):1" >expect &&
> - test_three_modes in_merge_bases
> + test_all_modes in_merge_bases
> '
>
> test_expect_success 'in_merge_bases:miss' '
> @@ -107,7 +113,7 @@ test_expect_success 'in_merge_bases:miss' '
> B:commit-5-9
> EOF
> echo "in_merge_bases(A,B):0" >expect &&
> - test_three_modes in_merge_bases
> + test_all_modes in_merge_bases
> '
>
> test_expect_success 'in_merge_bases_many:hit' '
> @@ -117,7 +123,7 @@ test_expect_success 'in_merge_bases_many:hit' '
> X:commit-5-7
> EOF
> echo "in_merge_bases_many(A,X):1" >expect &&
> - test_three_modes in_merge_bases_many
> + test_all_modes in_merge_bases_many
> '
>
> test_expect_success 'in_merge_bases_many:miss' '
> @@ -127,7 +133,7 @@ test_expect_success 'in_merge_bases_many:miss' '
> X:commit-8-6
> EOF
> echo "in_merge_bases_many(A,X):0" >expect &&
> - test_three_modes in_merge_bases_many
> + test_all_modes in_merge_bases_many
> '
>
> test_expect_success 'in_merge_bases_many:miss-heuristic' '
> @@ -137,7 +143,7 @@ test_expect_success 'in_merge_bases_many:miss-heuristic' '
> X:commit-6-6
> EOF
> echo "in_merge_bases_many(A,X):0" >expect &&
> - test_three_modes in_merge_bases_many
> + test_all_modes in_merge_bases_many
> '
>
> test_expect_success 'is_descendant_of:hit' '
> @@ -148,7 +154,7 @@ test_expect_success 'is_descendant_of:hit' '
> X:commit-1-1
> EOF
> echo "is_descendant_of(A,X):1" >expect &&
> - test_three_modes is_descendant_of
> + test_all_modes is_descendant_of
> '
>
> test_expect_success 'is_descendant_of:miss' '
> @@ -159,7 +165,7 @@ test_expect_success 'is_descendant_of:miss' '
> X:commit-7-6
> EOF
> echo "is_descendant_of(A,X):0" >expect &&
> - test_three_modes is_descendant_of
> + test_all_modes is_descendant_of
> '
>
> test_expect_success 'get_merge_bases_many' '
> @@ -174,7 +180,7 @@ test_expect_success 'get_merge_bases_many' '
> git rev-parse commit-5-6 \
> commit-4-7 | sort
> } >expect &&
> - test_three_modes get_merge_bases_many
> + test_all_modes get_merge_bases_many
> '
>
> test_expect_success 'reduce_heads' '
> @@ -196,7 +202,7 @@ test_expect_success 'reduce_heads' '
> commit-2-8 \
> commit-1-10 | sort
> } >expect &&
> - test_three_modes reduce_heads
> + test_all_modes reduce_heads
> '
>
> test_expect_success 'can_all_from_reach:hit' '
> @@ -219,7 +225,7 @@ test_expect_success 'can_all_from_reach:hit' '
> Y:commit-8-1
> EOF
> echo "can_all_from_reach(X,Y):1" >expect &&
> - test_three_modes can_all_from_reach
> + test_all_modes can_all_from_reach
> '
>
> test_expect_success 'can_all_from_reach:miss' '
> @@ -241,7 +247,7 @@ test_expect_success 'can_all_from_reach:miss' '
> Y:commit-8-5
> EOF
> echo "can_all_from_reach(X,Y):0" >expect &&
> - test_three_modes can_all_from_reach
> + test_all_modes can_all_from_reach
> '
>
> test_expect_success 'can_all_from_reach_with_flag: tags case' '
> @@ -264,7 +270,7 @@ test_expect_success 'can_all_from_reach_with_flag: tags case' '
> Y:commit-8-1
> EOF
> echo "can_all_from_reach_with_flag(X,_,_,0,0):1" >expect &&
> - test_three_modes can_all_from_reach_with_flag
> + test_all_modes can_all_from_reach_with_flag
> '
>
> test_expect_success 'commit_contains:hit' '
> @@ -280,8 +286,8 @@ test_expect_success 'commit_contains:hit' '
> X:commit-9-3
> EOF
> echo "commit_contains(_,A,X,_):1" >expect &&
> - test_three_modes commit_contains &&
> - test_three_modes commit_contains --tag
> + test_all_modes commit_contains &&
> + test_all_modes commit_contains --tag
> '
>
> test_expect_success 'commit_contains:miss' '
> @@ -297,8 +303,8 @@ test_expect_success 'commit_contains:miss' '
> X:commit-9-3
> EOF
> echo "commit_contains(_,A,X,_):0" >expect &&
> - test_three_modes commit_contains &&
> - test_three_modes commit_contains --tag
> + test_all_modes commit_contains &&
> + test_all_modes commit_contains --tag
> '
>
> test_expect_success 'rev-list: basic topo-order' '
> @@ -310,7 +316,7 @@ test_expect_success 'rev-list: basic topo-order' '
> commit-6-2 commit-5-2 commit-4-2 commit-3-2 commit-2-2 commit-1-2 \
> commit-6-1 commit-5-1 commit-4-1 commit-3-1 commit-2-1 commit-1-1 \
> >expect &&
> - run_three_modes git rev-list --topo-order commit-6-6
> + run_all_modes git rev-list --topo-order commit-6-6
> '
>
> test_expect_success 'rev-list: first-parent topo-order' '
> @@ -322,7 +328,7 @@ test_expect_success 'rev-list: first-parent topo-order' '
> commit-6-2 \
> commit-6-1 commit-5-1 commit-4-1 commit-3-1 commit-2-1 commit-1-1 \
> >expect &&
> - run_three_modes git rev-list --first-parent --topo-order commit-6-6
> + run_all_modes git rev-list --first-parent --topo-order commit-6-6
> '
>
> test_expect_success 'rev-list: range topo-order' '
> @@ -334,7 +340,7 @@ test_expect_success 'rev-list: range topo-order' '
> commit-6-2 commit-5-2 commit-4-2 \
> commit-6-1 commit-5-1 commit-4-1 \
> >expect &&
> - run_three_modes git rev-list --topo-order commit-3-3..commit-6-6
> + run_all_modes git rev-list --topo-order commit-3-3..commit-6-6
> '
>
> test_expect_success 'rev-list: range topo-order' '
> @@ -346,7 +352,7 @@ test_expect_success 'rev-list: range topo-order' '
> commit-6-2 commit-5-2 commit-4-2 \
> commit-6-1 commit-5-1 commit-4-1 \
> >expect &&
> - run_three_modes git rev-list --topo-order commit-3-8..commit-6-6
> + run_all_modes git rev-list --topo-order commit-3-8..commit-6-6
> '
>
> test_expect_success 'rev-list: first-parent range topo-order' '
> @@ -358,7 +364,7 @@ test_expect_success 'rev-list: first-parent range topo-order' '
> commit-6-2 \
> commit-6-1 commit-5-1 commit-4-1 \
> >expect &&
> - run_three_modes git rev-list --first-parent --topo-order commit-3-8..commit-6-6
> + run_all_modes git rev-list --first-parent --topo-order commit-3-8..commit-6-6
> '
>
> test_expect_success 'rev-list: ancestry-path topo-order' '
> @@ -368,7 +374,7 @@ test_expect_success 'rev-list: ancestry-path topo-order' '
> commit-6-4 commit-5-4 commit-4-4 commit-3-4 \
> commit-6-3 commit-5-3 commit-4-3 \
> >expect &&
> - run_three_modes git rev-list --topo-order --ancestry-path commit-3-3..commit-6-6
> + run_all_modes git rev-list --topo-order --ancestry-path commit-3-3..commit-6-6
> '
>
> test_expect_success 'rev-list: symmetric difference topo-order' '
> @@ -382,7 +388,7 @@ test_expect_success 'rev-list: symmetric difference topo-order' '
> commit-3-8 commit-2-8 commit-1-8 \
> commit-3-7 commit-2-7 commit-1-7 \
> >expect &&
> - run_three_modes git rev-list --topo-order commit-3-8...commit-6-6
> + run_all_modes git rev-list --topo-order commit-3-8...commit-6-6
> '
>
> test_expect_success 'get_reachable_subset:all' '
> @@ -402,7 +408,7 @@ test_expect_success 'get_reachable_subset:all' '
> commit-1-7 \
> commit-5-6 | sort
> ) >expect &&
> - test_three_modes get_reachable_subset
> + test_all_modes get_reachable_subset
> '
>
> test_expect_success 'get_reachable_subset:some' '
> @@ -420,7 +426,7 @@ test_expect_success 'get_reachable_subset:some' '
> git rev-parse commit-3-3 \
> commit-1-7 | sort
> ) >expect &&
> - test_three_modes get_reachable_subset
> + test_all_modes get_reachable_subset
> '
>
> test_expect_success 'get_reachable_subset:none' '
> @@ -434,7 +440,7 @@ test_expect_success 'get_reachable_subset:none' '
> Y:commit-2-8
> EOF
> echo "get_reachable_subset(X,Y)" >expect &&
> - test_three_modes get_reachable_subset
> + test_all_modes get_reachable_subset
All those are pure renames of test_three_modes() to test_all_modes(),
which now does tests for one more mode -- without GDAT.
All right.
> '
>
> test_done
Best,
--
Jakub Narębski
next prev parent reply other threads:[~2020-10-30 12:56 UTC|newest]
Thread overview: 211+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-28 9:13 [PATCH 0/6] [GSoC] Implement Corrected Commit Date Abhishek Kumar via GitGitGadget
2020-07-28 9:13 ` [PATCH 1/6] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-07-28 15:28 ` Taylor Blau
2020-07-30 5:24 ` Abhishek Kumar
2020-08-04 0:46 ` Jakub Narębski
2020-08-04 0:56 ` Taylor Blau
2020-08-04 10:10 ` Jakub Narębski
2020-08-04 7:55 ` Jakub Narębski
2020-07-28 9:13 ` [PATCH 2/6] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-07-28 13:00 ` Derrick Stolee
2020-07-28 15:30 ` Taylor Blau
2020-08-05 23:16 ` Jakub Narębski
2020-07-28 9:13 ` [PATCH 3/6] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-07-28 13:14 ` Derrick Stolee
2020-07-28 15:19 ` René Scharfe
2020-07-28 15:58 ` Derrick Stolee
2020-07-28 16:01 ` Taylor Blau
2020-07-30 6:07 ` Abhishek Kumar
2020-07-28 9:13 ` [PATCH 4/6] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-07-28 16:03 ` Taylor Blau
2020-07-28 9:13 ` [PATCH 5/6] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-07-28 16:12 ` Taylor Blau
2020-07-30 6:52 ` Abhishek Kumar
2020-07-28 9:13 ` [PATCH 6/6] commit-graph: implement corrected commit date offset Abhishek Kumar via GitGitGadget
2020-07-28 15:55 ` Derrick Stolee
2020-07-28 16:23 ` Taylor Blau
2020-07-30 7:27 ` Abhishek Kumar
2020-07-28 14:54 ` [PATCH 0/6] [GSoC] Implement Corrected Commit Date Taylor Blau
2020-07-30 7:47 ` Abhishek Kumar
2020-07-28 16:35 ` Derrick Stolee
2020-08-09 2:53 ` [PATCH v2 00/10] " Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 01/10] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 02/10] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 03/10] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 04/10] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 05/10] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-08-10 16:28 ` Derrick Stolee
2020-08-11 11:03 ` Abhishek Kumar
2020-08-11 12:27 ` Derrick Stolee
2020-08-11 18:58 ` Taylor Blau
2020-08-09 2:53 ` [PATCH v2 06/10] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 07/10] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-08-10 14:23 ` Derrick Stolee
2020-08-14 4:59 ` Abhishek Kumar
2020-08-14 12:24 ` Derrick Stolee
2020-08-09 2:53 ` [PATCH v2 08/10] commit-graph: handle mixed generation commit chains Abhishek Kumar via GitGitGadget
2020-08-10 16:42 ` Derrick Stolee
2020-08-11 11:36 ` Abhishek Kumar
2020-08-11 12:43 ` Derrick Stolee
2020-08-09 2:53 ` [PATCH v2 09/10] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-08-09 2:53 ` [PATCH v2 10/10] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-08-10 16:47 ` [PATCH v2 00/10] [GSoC] Implement Corrected Commit Date Derrick Stolee
2020-08-15 16:39 ` [PATCH v3 00/11] " Abhishek Kumar via GitGitGadget
2020-08-15 16:39 ` [PATCH v3 01/11] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-08-17 22:30 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-08-18 14:18 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-08-19 17:54 ` Jakub Narębski
2020-08-21 4:11 ` Abhishek Kumar
2020-08-25 11:11 ` Jakub Narębski
2020-09-01 11:35 ` Abhishek Kumar
2020-08-15 16:39 ` [PATCH v3 04/11] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-08-17 13:22 ` Derrick Stolee
2020-08-21 11:05 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 05/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-08-21 13:14 ` Jakub Narębski
2020-08-25 5:04 ` Abhishek Kumar
2020-08-25 12:18 ` Jakub Narębski
2020-09-01 12:06 ` Abhishek Kumar
2020-09-03 13:42 ` Jakub Narębski
2020-09-05 17:21 ` Abhishek Kumar
2020-09-13 15:39 ` Jakub Narębski
2020-09-28 21:48 ` Jakub Narębski
2020-10-05 5:25 ` Abhishek Kumar
2020-08-15 16:39 ` [PATCH v3 06/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-08-21 18:43 ` Jakub Narębski
2020-08-25 6:14 ` Abhishek Kumar
2020-08-25 7:33 ` Jakub Narębski
2020-08-25 7:56 ` Jakub Narębski
2020-09-01 10:26 ` Abhishek Kumar
2020-09-03 9:25 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-08-22 0:05 ` Jakub Narębski
2020-08-25 6:49 ` Abhishek Kumar
2020-08-25 10:07 ` Jakub Narębski
2020-09-01 11:01 ` Abhishek Kumar
2020-08-15 16:39 ` [PATCH v3 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-08-22 13:09 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-08-22 17:14 ` Jakub Narębski
2020-08-26 7:15 ` Abhishek Kumar
2020-08-26 10:38 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-08-22 19:09 ` Jakub Narębski
2020-09-01 10:08 ` Abhishek Kumar
2020-09-03 19:11 ` Jakub Narębski
2020-08-15 16:39 ` [PATCH v3 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-08-22 22:20 ` Jakub Narębski
2020-08-27 6:39 ` Abhishek Kumar
2020-08-27 12:43 ` Jakub Narębski
2020-08-27 13:15 ` Derrick Stolee
2020-09-01 13:01 ` Abhishek Kumar
2020-08-17 0:13 ` [PATCH v3 00/11] [GSoC] Implement Corrected Commit Date Jakub Narębski
[not found] ` <CANQwDwdKp7oKy9BeKdvKhwPUiq0R5MS8TCw-eWGCYCoMGv=G-g@mail.gmail.com>
2020-08-17 1:32 ` Fwd: " Taylor Blau
2020-08-17 7:56 ` Jakub Narębski
2020-08-18 6:12 ` Abhishek Kumar
2020-08-23 15:27 ` Jakub Narębski
2020-08-24 2:49 ` Abhishek Kumar
2020-10-07 14:09 ` [PATCH v4 00/10] " Abhishek Kumar via GitGitGadget
2020-10-07 14:09 ` [PATCH v4 01/10] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2020-10-24 23:16 ` Jakub Narębski
2020-10-25 20:58 ` Taylor Blau
2020-11-03 5:36 ` Abhishek Kumar
2020-10-07 14:09 ` [PATCH v4 02/10] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-10-24 23:41 ` Jakub Narębski
2020-10-07 14:09 ` [PATCH v4 03/10] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-10-25 10:52 ` Jakub Narębski
2020-10-27 6:33 ` Abhishek Kumar
2020-10-07 14:09 ` [PATCH v4 04/10] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-10-25 13:48 ` Jakub Narębski
2020-11-03 6:40 ` Abhishek Kumar
2020-10-07 14:09 ` [PATCH v4 05/10] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-10-25 22:17 ` Jakub Narębski
2020-10-07 14:09 ` [PATCH v4 06/10] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-10-27 18:53 ` Jakub Narębski
2020-11-03 11:44 ` Abhishek Kumar
2020-11-04 16:45 ` Jakub Narębski
2020-11-05 14:05 ` Philip Oakley
2020-11-05 18:22 ` Junio C Hamano
2020-11-06 18:26 ` Extending and updating gitglossary (was: Re: [PATCH v4 06/10] commit-graph: implement corrected commit date) Jakub Narębski
2020-11-06 19:33 ` Extending and updating gitglossary Junio C Hamano
2020-11-08 17:23 ` Extending and updating gitglossary (was: Re: [PATCH v4 06/10] commit-graph: implement corrected commit date) Philip Oakley
2020-11-10 1:35 ` Extending and updating gitglossary Jakub Narębski
2020-11-10 14:04 ` Philip Oakley
2020-11-10 23:52 ` Jakub Narębski
2020-10-07 14:09 ` [PATCH v4 07/10] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-10-30 12:45 ` Jakub Narębski [this message]
2020-11-06 11:25 ` Abhishek Kumar
2020-11-06 17:56 ` Jakub Narębski
2020-10-07 14:09 ` [PATCH v4 08/10] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-11-01 0:55 ` Jakub Narębski
2020-11-12 10:01 ` Abhishek Kumar
2020-11-13 9:59 ` Jakub Narębski
2020-10-07 14:09 ` [PATCH v4 09/10] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-11-03 17:59 ` Jakub Narębski
2020-11-03 18:19 ` Junio C Hamano
2020-11-20 10:33 ` Abhishek Kumar
2020-10-07 14:09 ` [PATCH v4 10/10] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-11-04 1:37 ` Jakub Narębski
2020-11-21 6:30 ` Abhishek Kumar
2020-11-04 23:37 ` [PATCH v4 00/10] [GSoC] Implement Corrected Commit Date Jakub Narębski
2020-11-22 5:31 ` Abhishek Kumar
2020-12-28 11:15 ` [PATCH v5 00/11] " Abhishek Kumar via GitGitGadget
2020-12-28 11:15 ` [PATCH v5 01/11] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2020-12-30 1:35 ` Derrick Stolee
2021-01-08 5:45 ` Abhishek Kumar
2021-01-05 9:45 ` SZEDER Gábor
2021-01-05 9:47 ` SZEDER Gábor
2021-01-08 5:51 ` Abhishek Kumar
2020-12-28 11:15 ` [PATCH v5 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 04/11] t6600-test-reach: generalize *_three_modes Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 05/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 06/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-12-30 1:53 ` Derrick Stolee
2021-01-10 12:21 ` Abhishek Kumar
2020-12-28 11:16 ` [PATCH v5 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-12-30 3:23 ` Derrick Stolee
2021-01-10 13:13 ` Abhishek Kumar
2021-01-11 12:43 ` Derrick Stolee
2020-12-28 11:16 ` [PATCH v5 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-12-28 11:16 ` [PATCH v5 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-12-30 4:35 ` [PATCH v5 00/11] [GSoC] Implement Corrected Commit Date Derrick Stolee
2021-01-10 14:06 ` Abhishek Kumar
2021-01-16 18:11 ` [PATCH v6 " Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 01/11] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 04/11] t6600-test-reach: generalize *_three_modes Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 05/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 06/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2021-01-16 18:11 ` [PATCH v6 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2021-01-27 0:04 ` SZEDER Gábor
2021-01-30 5:29 ` Abhishek Kumar
2021-01-31 1:45 ` Taylor Blau
2021-01-18 21:04 ` [PATCH v6 00/11] [GSoC] Implement Corrected Commit Date Derrick Stolee
2021-01-18 22:00 ` Taylor Blau
2021-01-23 12:11 ` Abhishek Kumar
2021-01-19 0:02 ` Junio C Hamano
2021-01-23 12:07 ` Abhishek Kumar
2021-02-01 6:58 ` [PATCH v7 " Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 01/11] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 04/11] t6600-test-reach: generalize *_three_modes Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 05/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 06/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 07/11] commit-graph: document generation number v2 Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 08/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 09/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 10/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2021-02-01 6:58 ` [PATCH v7 11/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2021-02-01 13:14 ` [PATCH v7 00/11] [GSoC] Implement Corrected Commit Date Derrick Stolee
2021-02-01 18:26 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=854kmbx4pi.fsf@gmail.com \
--to=jnareb@gmail.com \
--cc=abhishekkumar8222@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitgitgadget@gmail.com \
--cc=me@ttaylorr.com \
--cc=stolee@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).