From: Felipe Contreras <felipe.contreras@gmail.com>
To: git@vger.kernel.org
Cc: Junio C Hamano <gitster@pobox.com>, Jeff King <peff@peff.net>,
Elijah Newren <newren@gmail.com>,
Felipe Contreras <felipe.contreras@gmail.com>,
Theodore Ts'o <tytso@mit.edu>
Subject: [PATCH v2 10/13] pull: add pull.mode
Date: Fri, 18 Dec 2020 15:10:23 -0600 [thread overview]
Message-ID: <20201218211026.1937168-11-felipe.contreras@gmail.com> (raw)
In-Reply-To: <20201218211026.1937168-1-felipe.contreras@gmail.com>
The evolution of pull options has somewhat served most users, however,
they have been found lacking for a very needed trio: merge / rebase /
fast-forward-only.
Another thing that is missing is the possibility to specify pull options
on a per-repository basis, as Theodore Ts'o suggested long time ago
[1].
This patch adds a pull.mode option with two possible values (for now);
merge and rebase. If set, it overrides what the user has specified in
pull.rebase, and it's updated with either --merge, or --rebase.
In addition to pull.mode, a 'remote.<name>.pullmode' configuration is
introduced, so the user can specify the desired options based on the
source of the pull, rather than the destination.
And of course; new modes like fast-forward-only can be introduced later
on.
[1] https://lore.kernel.org/git/20130312212027.GE14792@thunk.org
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
---
Documentation/config/pull.txt | 6 +++
Documentation/config/remote.txt | 6 +++
Documentation/git-pull.txt | 3 +-
builtin/pull.c | 81 +++++++++++++++++++++++++++++++--
rebase.c | 10 ++++
rebase.h | 9 ++++
t/t5520-pull.sh | 54 ++++++++++++++++++++++
t/t7601-merge-pull-config.sh | 14 ++++++
8 files changed, 178 insertions(+), 5 deletions(-)
diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt
index 5404830609..f4385cde33 100644
--- a/Documentation/config/pull.txt
+++ b/Documentation/config/pull.txt
@@ -29,6 +29,12 @@ mode.
it unless you understand the implications (see linkgit:git-rebase[1]
for details).
+pull.mode::
+ When "git pull" is run, this determines if it would either merge or
+ rebase the fetched branch. The possible values are 'merge',
+ and 'rebase'. See "branch.<name>.pullmode" for setting this on a
+ per-branch basis.
+
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
diff --git a/Documentation/config/remote.txt b/Documentation/config/remote.txt
index a8e6437a90..a732c92cf5 100644
--- a/Documentation/config/remote.txt
+++ b/Documentation/config/remote.txt
@@ -84,3 +84,9 @@ remote.<name>.promisor::
remote.<name>.partialclonefilter::
The filter that will be applied when fetching from this
promisor remote.
+
+remote.<name>.pullmode::
+ When "git pull" is run, this determines if it would either merge or
+ rebase the branches from this remote. The possible values are 'merge', and
+ 'rebase'. See "pull.mode" for doing this in a non
+ repository-specific manner.
diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt
index 195496e63d..65f8b16a7d 100644
--- a/Documentation/git-pull.txt
+++ b/Documentation/git-pull.txt
@@ -72,7 +72,8 @@ synchronize the local, and remote brances.
In these situations `git pull` will warn you about your possible
options, which are either `--merge`, or `--rebase`. However, by default
-it will continue doing a merge.
+it will continue doing a merge (you can change that with the `pull.mode`
+configuration).
A merge will create a new commit with two parent commits (`G` and `C`)
and a log message describing the changes, which you can edit.
diff --git a/builtin/pull.c b/builtin/pull.c
index f1a03ccd14..bfadd585c7 100644
--- a/builtin/pull.c
+++ b/builtin/pull.c
@@ -27,6 +27,8 @@
#include "commit-reach.h"
#include "sequencer.h"
+static enum pull_mode_type mode;
+
/**
* Parses the value of --rebase. If value is a false value, returns
* REBASE_FALSE. If value is a true value, returns REBASE_TRUE. If value is
@@ -49,6 +51,14 @@ static enum rebase_type parse_config_rebase(const char *key, const char *value,
return REBASE_INVALID;
}
+static enum pull_mode_type parse_config_pull_mode(const char *key, const char *value)
+{
+ enum pull_mode_type v = pull_mode_parse_value(value);
+ if (v == PULL_MODE_INVALID)
+ die(_("Invalid value for %s: %s"), key, value);
+ return v;
+}
+
/**
* Callback for --rebase, which parses arg with parse_config_rebase().
*/
@@ -60,9 +70,21 @@ static int parse_opt_rebase(const struct option *opt, const char *arg, int unset
*value = parse_config_rebase("--rebase", arg, 0);
else
*value = unset ? REBASE_FALSE : REBASE_TRUE;
+
+ if (*value > 0)
+ mode = *value >= REBASE_TRUE ? PULL_MODE_REBASE : PULL_MODE_MERGE;
+
return *value == REBASE_INVALID ? -1 : 0;
}
+static int parse_opt_merge(const struct option *opt, const char *arg, int unset)
+{
+ enum rebase_type *value = opt->value;
+ mode = PULL_MODE_MERGE;
+ *value = REBASE_FALSE;
+ return 0;
+}
+
static const char * const pull_usage[] = {
N_("git pull [<options>] [<repository> [<refspec>...]]"),
NULL
@@ -129,8 +151,9 @@ static struct option pull_options[] = {
"(false|true|merges|preserve|interactive)",
N_("incorporate changes by rebasing rather than merging"),
PARSE_OPT_OPTARG, parse_opt_rebase),
- OPT_SET_INT('m', "merge", &opt_rebase,
- N_("incorporate changes by merging"), REBASE_FALSE),
+ OPT_CALLBACK_F('m', "merge", &opt_rebase, NULL,
+ N_("incorporate changes by merging"),
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, parse_opt_merge),
OPT_PASSTHRU('n', NULL, &opt_diffstat, NULL,
N_("do not show a diffstat at the end of the merge"),
PARSE_OPT_NOARG | PARSE_OPT_NONEG),
@@ -349,6 +372,31 @@ static enum rebase_type config_get_rebase(void)
return REBASE_DEFAULT;
}
+static enum pull_mode_type config_get_pull_mode(const char *repo)
+{
+ const char *value;
+ struct remote *remote;
+
+ remote = remote_get(repo);
+
+ if (remote) {
+ char *key = xstrfmt("remote.%s.pullmode", remote->name);
+
+ if (!git_config_get_value(key, &value)) {
+ enum pull_mode_type ret = parse_config_pull_mode(key, value);
+ free(key);
+ return ret;
+ }
+
+ free(key);
+ }
+
+ if (!git_config_get_value("pull.mode", &value))
+ return parse_config_pull_mode("pull.mode", value);
+
+ return PULL_MODE_DEFAULT;
+}
+
/**
* Read config variables.
*/
@@ -935,8 +983,8 @@ static void show_advice_pull_non_ff(void)
"\n"
"You can squelch this message by running one of the following commands:\n"
"\n"
- " git config --global pull.rebase false # merge\n"
- " git config --global pull.rebase true # rebase\n"
+ " git config --global pull.mode merge\n"
+ " git config --global pull.mode rebase\n"
" git config --global pull.ff only # fast-forward only\n"
"\n"
"If unsure, run \"git pull --merge\".\n"
@@ -970,6 +1018,31 @@ int cmd_pull(int argc, const char **argv, const char *prefix)
parse_repo_refspecs(argc, argv, &repo, &refspecs);
+ /*
+ * If the user has not specified --merge or --rebase, fetch pull.mode to override
+ * pull.rename.
+ */
+ if (!mode) {
+ mode = config_get_pull_mode(repo);
+
+ switch (mode) {
+ case PULL_MODE_MERGE:
+ opt_rebase = REBASE_FALSE;
+ break;
+ case PULL_MODE_REBASE:
+ /* Do not oeverride other rebase modes */
+ if (opt_rebase < REBASE_TRUE)
+ opt_rebase = REBASE_TRUE;
+ break;
+ case PULL_MODE_DEFAULT:
+ if (opt_rebase > 0)
+ mode = opt_rebase >= REBASE_TRUE ? PULL_MODE_REBASE : PULL_MODE_MERGE;
+ break;
+ default:
+ break;
+ }
+ }
+
if (read_cache_unmerged())
die_resolve_conflict("pull");
diff --git a/rebase.c b/rebase.c
index f8137d859b..bdfca49886 100644
--- a/rebase.c
+++ b/rebase.c
@@ -33,3 +33,13 @@ enum rebase_type rebase_parse_value(const char *value)
return REBASE_INVALID;
}
+
+enum pull_mode_type pull_mode_parse_value(const char *value)
+{
+ if (!strcmp(value, "merge") || !strcmp(value, "m"))
+ return PULL_MODE_MERGE;
+ else if (!strcmp(value, "rebase") || !strcmp(value, "r"))
+ return PULL_MODE_REBASE;
+
+ return PULL_MODE_INVALID;
+}
diff --git a/rebase.h b/rebase.h
index 34d4acfd74..5ab8f4ddd5 100644
--- a/rebase.h
+++ b/rebase.h
@@ -13,4 +13,13 @@ enum rebase_type {
enum rebase_type rebase_parse_value(const char *value);
+enum pull_mode_type {
+ PULL_MODE_INVALID = -1,
+ PULL_MODE_DEFAULT = 0,
+ PULL_MODE_MERGE,
+ PULL_MODE_REBASE
+};
+
+enum pull_mode_type pull_mode_parse_value(const char *value);
+
#endif /* REBASE */
diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
index 9fae07cdfa..59799ac4d5 100755
--- a/t/t5520-pull.sh
+++ b/t/t5520-pull.sh
@@ -449,6 +449,16 @@ test_expect_success 'pull.rebase' '
test_cmp expect actual
'
+test_expect_success 'pull.mode rebase' '
+ git reset --hard before-rebase &&
+ test_config pull.mode rebase &&
+ git pull . copy &&
+ test_cmp_rev HEAD^ copy &&
+ echo new >expect &&
+ git show HEAD:file2 >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'pull --autostash & pull.rebase=true' '
test_config pull.rebase true &&
test_pull_autostash 1 --autostash
@@ -480,6 +490,18 @@ test_expect_success 'branch.to-rebase.rebase should override pull.rebase' '
test_cmp expect actual
'
+test_expect_success 'remote..pullmode' '
+ git reset --hard before-rebase &&
+ git remote add test_remote . &&
+ test_when_finished "git remote remove test_remote" &&
+ test_config remote.test_remote.pullmode rebase &&
+ git pull test_remote copy &&
+ test_cmp_rev HEAD^ copy &&
+ echo new >expect &&
+ git show HEAD:file2 >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'pull --rebase warns on --verify-signatures' '
git reset --hard before-rebase &&
git pull --rebase --verify-signatures . copy 2>err &&
@@ -523,6 +545,17 @@ test_expect_success 'pull.rebase=false create a new merge commit' '
test_cmp expect actual
'
+test_expect_success 'pull.mode=merge create a new merge commit' '
+ git reset --hard before-preserve-rebase &&
+ test_config pull.mode merge &&
+ git pull . copy &&
+ test_cmp_rev HEAD^1 before-preserve-rebase &&
+ test_cmp_rev HEAD^2 copy &&
+ echo file3 >expect &&
+ git show HEAD:file3.t >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'pull.rebase=true flattens keep-merge' '
git reset --hard before-preserve-rebase &&
test_config pull.rebase true &&
@@ -552,6 +585,16 @@ test_expect_success REBASE_P \
test_cmp_rev HEAD^2 keep-merge
'
+test_expect_success REBASE_P \
+ 'pull.rebase=preserve rebases and merges keep-merge with pull.mode' '
+ git reset --hard before-preserve-rebase &&
+ test_config pull.mode rebase &&
+ test_config pull.rebase preserve &&
+ git pull . copy &&
+ test_cmp_rev HEAD^^ copy &&
+ test_cmp_rev HEAD^2 keep-merge
+'
+
test_expect_success 'pull.rebase=interactive' '
write_script "$TRASH_DIRECTORY/fake-editor" <<-\EOF &&
echo I was here >fake.out &&
@@ -593,6 +636,17 @@ test_expect_success '--rebase=false create a new merge commit' '
test_cmp expect actual
'
+test_expect_success '--rebase=false create a new merge commit with pull.mode' '
+ git reset --hard before-preserve-rebase &&
+ test_config pull.mode rebase &&
+ git pull --rebase=false . copy &&
+ test_cmp_rev HEAD^1 before-preserve-rebase &&
+ test_cmp_rev HEAD^2 copy &&
+ echo file3 >expect &&
+ git show HEAD:file3.t >actual &&
+ test_cmp expect actual
+'
+
test_expect_success '--rebase=true rebases and flattens keep-merge' '
git reset --hard before-preserve-rebase &&
test_config pull.rebase preserve &&
diff --git a/t/t7601-merge-pull-config.sh b/t/t7601-merge-pull-config.sh
index 7c4607191a..47fd2e2d05 100755
--- a/t/t7601-merge-pull-config.sh
+++ b/t/t7601-merge-pull-config.sh
@@ -33,6 +33,13 @@ test_expect_success 'pull.rebase not set' '
test_i18ngrep ! "Pulling without specifying how to reconcile" err
'
+test_expect_success 'pull.mode set' '
+ git reset --hard c0 &&
+ test_config pull.mode merge &&
+ git pull . c1 2>err &&
+ test_i18ngrep ! "Pulling without specifying how to reconcile" err
+'
+
test_expect_success 'pull.rebase not set and pull.ff=true' '
git reset --hard c0 &&
test_config pull.ff true &&
@@ -92,6 +99,13 @@ test_expect_success 'pull.rebase not set (not-fast-forward)' '
test_i18ngrep "Pulling without specifying how to reconcile" decoded
'
+test_expect_success 'pull.mode set' '
+ git reset --hard c2 &&
+ test_config pull.mode merge &&
+ git pull . c1 2>err &&
+ test_i18ngrep ! "Pulling without specifying how to reconcile" err
+'
+
test_expect_success 'pull.rebase not set and pull.ff=true (not-fast-forward)' '
git reset --hard c2 &&
test_config pull.ff true &&
--
2.30.0.rc0
next prev parent reply other threads:[~2020-12-18 21:12 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 21:10 [PATCH v2 00/13] pull: pull mode part 2 Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 01/13] doc: pull: explain what is a fast-forward Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 02/13] pull: improve default warning Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 03/13] pull: cleanup autostash check Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 04/13] pull: trivial cleanup Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 05/13] pull: trivial whitespace style fix Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 06/13] pull: introduce --merge option Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 07/13] rebase: add REBASE_DEFAULT Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 08/13] pull: move configurations fetches Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 09/13] pull: show warning with --ff options Felipe Contreras
2020-12-18 21:10 ` Felipe Contreras [this message]
2020-12-18 21:10 ` [PATCH v2 11/13] pull: add pull.mode=fast-forward Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 12/13] pull: reorganize mode conditionals Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 13/13] pull: improve --rebase and pull.rebase interaction Felipe Contreras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218211026.1937168-11-felipe.contreras@gmail.com \
--to=felipe.contreras@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=newren@gmail.com \
--cc=peff@peff.net \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).