git@vger.kernel.org mailing list mirror (one of many)
 help / color / mirror / code / Atom feed
From: Taylor Blau <me@ttaylorr.com>
To: Taylor Blau <me@ttaylorr.com>
Cc: Derrick Stolee <stolee@gmail.com>,
	git@vger.kernel.org, peff@peff.net, dstolee@microsoft.com,
	szeder.dev@gmail.com, gitster@pobox.com
Subject: Re: [PATCH v3 12/14] commit-graph: add large-filters bitmap chunk
Date: Tue, 11 Aug 2020 18:05:03 -0400	[thread overview]
Message-ID: <20200811220503.GC66656@syl.lan> (raw)
In-Reply-To: <20200811211815.GA65971@syl.lan>

On Tue, Aug 11, 2020 at 05:18:15PM -0400, Taylor Blau wrote:
> On Tue, Aug 11, 2020 at 05:11:49PM -0400, Derrick Stolee wrote:
> > On 8/11/20 4:52 PM, Taylor Blau wrote:
> > > To allow using the existing bitmap code with 64-bit words, we write the
> > > data in network byte order from the 64-bit words. This means we also
> > > need to read the array from the commit-graph file by translating each
> > > word from network byte order using get_be64() when loading the commit
> > > graph. (Note that this *could* be delayed until first-use, but a later
> > > patch will rely on this being initialized early, so we assume the
> > > up-front cost when parsing instead of delaying initialization).
> >
> > I don't think this is correct to do. This means that every commit-graph
> > load will load the entire large bloom filter chunk into memory before
> > allowing a single commit to be read from the graph.
> >
> > In the case of a very large commit-graph (> 1 million commits), this
> > would cause a significant initial cost that is not necessarily needed
> > for anything. For example, "git log -1" will be delayed by this action.
> >
> > If I understand correctly, this bloom_large bitmap is only used when
> > writing Bloom filters. At that point, reading the entire bitmap from
> > disk into memory is inexpensive compared to the time saved by the
> > feature.
>
> That's not quite correct. By this point in the patch series, we only use
> this bitmap for writing, but in the final patch, we will use it in
> 'load_bloom_filter_from_graph()' (see that patch for the details of why,
> there is an explanatory comment to that effect).
>
> So, the way that this lazy initialization was written was subtly
> incorrect, since calling 'load_bloom_filter_from_graph' would return the
> wrong value depending on what was or wasn't called before it (namely
> whether or not we had initialized the bitmap).

Ack, this is totally wrong. I had the wrong impression of where you were
actually initializing the bitmaps, which is what motivated the change.
Whoops, totally my mistake. Here's a version of the patch that does what
it says.

There is a small adjustment that needs to be made to the final patch, so
I can send a version of that, too, if we decide that this is the
direction we want to go (and that there are no other changes to the
series). The change to the final patch basically boils down to using
'get_bloom_filter_large_in_graph()' instead of manually checking the
bitmap (so that the aforementioned function can do its initialization
ahead of time).

Thanks for catching this subtle issue, I'm glad that we got it resolved
before going further.

--- >8 ---

Subject: [PATCH] commit-graph: add large-filters bitmap chunk

When a commit has more than a certain number of changed paths (commonly
512), the commit-graph machinery represents it as a zero-length filter.
This is done since having many entries in the Bloom filter has
undesirable effects on the false positivity rate.

In addition to these too-large filters, the commit-graph machinery also
represents commits with no filter and commits with no changed paths in
the same way.

When writing a commit-graph that aggregates several incremental
commit-graph layers (eg., with '--split=replace'), the commit-graph
machinery first computes all of the Bloom filters that it wants to write
but does not already know about from existing graph layers. Because we
overload the zero-length filter in the above fashion, this leads to
recomputing large filters over and over again.

This is already undesirable, since it means that we are wasting
considerable effort to discover that a commit with too many changed
paths, only to throw that effort away (and then repeat the process the
next time a roll-up is performed).

In a subsequent patch, we will add a '--max-new-filters=<n>' option,
which specifies an upper-bound on the number of new filters we are
willing to compute from scratch. Suppose that there are 'N' too-large
filters, and we specify '--max-new-filters=M'. If 'N >= M', it is
unlikely that any filters will be generated, since we'll spend most of
our effort on filters that we ultimately throw away. If 'N < M', filters
will trickle in over time, but only at most 'M - N' per-write.

To address this, add a new chunk which encodes a bitmap where the ith
bit is on iff the ith commit has zero or at least 512 changed paths.
Likewise store the maximum number of changed paths we are willing to
store in order to prepare for eventually making this value more easily
customizable. When computing Bloom filters, first consult the relevant
bitmap (in the case that we are rolling up existing layers) to see if
computing the Bloom filter from scratch would be a waste of time.

This patch implements a new chunk instead of extending the existing BIDX
and BDAT chunks because modifying these chunks would confuse old
clients. (Eg., setting the most-significant bit in the BIDX chunk would
confuse old clients and require a version bump).

To allow using the existing bitmap code with 64-bit words, we write the
data in network byte order from the 64-bit words. This means we also
need to read the array from the commit-graph file by translating each
word from network byte order using get_be64() when loading the commit
graph. Initialize this bitmap lazily to avoid paying a linear-time cost
upon each commit-graph load even if we do not need the bitmaps
themselves.

By avoiding the need to move to new versions of the BDAT and BIDX chunk,
we can give ourselves more time to consider whether or not other
modifications to these chunks are worthwhile without holding up this
change.

Another approach would be to introduce a new BIDX chunk (say, one
identified by 'BID2') which is identical to the existing BIDX chunk,
except the most-significant bit of each offset is interpreted as "this
filter is too big" iff looking at a BID2 chunk. This avoids having to
write a bitmap, but forces older clients to rewrite their commit-graphs
(as well as reduces the theoretical largest Bloom filters we could
write, and forces us to maintain the code necessary to translate BIDX
chunks to BID2 ones). Separately from this patch, I implemented this
alternate approach and did not find it to be advantageous.

Signed-off-by: Taylor Blau <me@ttaylorr.com>
---
 .../technical/commit-graph-format.txt         |  12 +++
 bloom.h                                       |   2 +-
 commit-graph.c                                | 100 +++++++++++++++---
 commit-graph.h                                |  10 ++
 t/t4216-log-bloom.sh                          |  25 ++++-
 5 files changed, 134 insertions(+), 15 deletions(-)

diff --git a/Documentation/technical/commit-graph-format.txt b/Documentation/technical/commit-graph-format.txt
index 440541045d..5f2d9ab4d7 100644
--- a/Documentation/technical/commit-graph-format.txt
+++ b/Documentation/technical/commit-graph-format.txt
@@ -123,6 +123,18 @@ CHUNK DATA:
       of length zero.
     * The BDAT chunk is present if and only if BIDX is present.

+  Large Bloom Filters (ID: {'B', 'F', 'X', 'L'}) [Optional]
+    * It starts with a 32-bit unsigned integer specifying the maximum number of
+      changed-paths that can be stored in a single Bloom filter.
+    * It then contains a list of 64-bit words (the length of this list is
+      determined by the width of the chunk) which is a bitmap. The 'i'th bit is
+      set exactly when the 'i'th commit in the graph has a changed-path Bloom
+      filter with zero entries (either because the commit is empty, or because
+      it contains more than 512 changed paths).
+    * The BFXL chunk is present only when the BIDX and BDAT chunks are
+      also present.
+
+
   Base Graphs List (ID: {'B', 'A', 'S', 'E'}) [Optional]
       This list of H-byte hashes describe a set of B commit-graph files that
       form a commit-graph chain. The graph position for the ith commit in this
diff --git a/bloom.h b/bloom.h
index 3f19e3fca4..464d9b57de 100644
--- a/bloom.h
+++ b/bloom.h
@@ -33,7 +33,7 @@ struct bloom_filter_settings {
 	 * The maximum number of changed paths per commit
 	 * before declaring a Bloom filter to be too-large.
 	 *
-	 * Not written to the commit-graph file.
+	 * Written to the 'BFXL' chunk (instead of 'BDAT').
 	 */
 	uint32_t max_changed_paths;
 };
diff --git a/commit-graph.c b/commit-graph.c
index 8964453433..4ccc7a3e56 100644
--- a/commit-graph.c
+++ b/commit-graph.c
@@ -41,8 +41,9 @@ void git_test_write_commit_graph_or_die(void)
 #define GRAPH_CHUNKID_EXTRAEDGES 0x45444745 /* "EDGE" */
 #define GRAPH_CHUNKID_BLOOMINDEXES 0x42494458 /* "BIDX" */
 #define GRAPH_CHUNKID_BLOOMDATA 0x42444154 /* "BDAT" */
+#define GRAPH_CHUNKID_BLOOMLARGE 0x4246584c /* "BFXL" */
 #define GRAPH_CHUNKID_BASE 0x42415345 /* "BASE" */
-#define MAX_NUM_CHUNKS 7
+#define MAX_NUM_CHUNKS 8

 #define GRAPH_DATA_WIDTH (the_hash_algo->rawsz + 16)

@@ -429,6 +430,16 @@ struct commit_graph *parse_commit_graph(struct repository *r,
 				graph->bloom_filter_settings->bits_per_entry = get_be32(data + chunk_offset + 8);
 			}
 			break;
+
+		case GRAPH_CHUNKID_BLOOMLARGE:
+			if (graph->chunk_bloom_large_filters)
+				chunk_repeated = 1;
+			else if (r->settings.commit_graph_read_changed_paths) {
+				graph->chunk_bloom_large_filters = data + chunk_offset + sizeof(uint32_t);
+				graph->bloom_large_alloc = get_be64(chunk_lookup + 4) - chunk_offset - sizeof(uint32_t);
+				graph->bloom_filter_settings->max_changed_paths = get_be32(data + chunk_offset);
+			}
+			break;
 		}

 		if (chunk_repeated) {
@@ -443,6 +454,8 @@ struct commit_graph *parse_commit_graph(struct repository *r,
 		/* We need both the bloom chunks to exist together. Else ignore the data */
 		graph->chunk_bloom_indexes = NULL;
 		graph->chunk_bloom_data = NULL;
+		graph->chunk_bloom_large_filters = NULL;
+		graph->bloom_large_alloc = 0;
 		FREE_AND_NULL(graph->bloom_filter_settings);
 	}

@@ -932,6 +945,32 @@ struct tree *get_commit_tree_in_graph(struct repository *r, const struct commit
 	return get_commit_tree_in_graph_one(r, r->objects->commit_graph, c);
 }

+int get_bloom_filter_large_in_graph(struct commit_graph *g,
+				    const struct commit *c)
+{
+	uint32_t graph_pos = commit_graph_position(c);
+	if (graph_pos == COMMIT_NOT_FROM_GRAPH)
+		return 0;
+
+	while (g && graph_pos < g->num_commits_in_base)
+		g = g->base_graph;
+
+	if (!g)
+		return 0;
+
+	if (!g->bloom_large && g->bloom_large_alloc) {
+		size_t i;
+		g->bloom_large = bitmap_word_alloc(g->bloom_large_alloc);
+
+		for (i = 0; i < g->bloom_large->word_alloc; i++)
+			g->bloom_large->words[i] = get_be64(
+				g->chunk_bloom_large_filters + i * sizeof(eword_t));
+	}
+
+	if (!g->bloom_large)
+		return 0;
+	return bitmap_get(g->bloom_large, graph_pos - g->num_commits_in_base);
+}

 struct packed_oid_list {
 	struct object_id *list;
@@ -970,8 +1009,10 @@ struct write_commit_graph_context {
 	size_t total_bloom_filter_data_size;
 	const struct bloom_filter_settings *bloom_settings;

+	int count_bloom_filter_known_large;
 	int count_bloom_filter_found_large;
 	int count_bloom_filter_computed;
+	struct bitmap *bloom_large;
 };

 static int write_graph_chunk_fanout(struct hashfile *f,
@@ -1235,6 +1276,23 @@ static int write_graph_chunk_bloom_data(struct hashfile *f,
 	return 0;
 }

+static int write_graph_chunk_bloom_large(struct hashfile *f,
+					 struct write_commit_graph_context *ctx)
+{
+	size_t i, alloc = ctx->commits.nr / BITS_IN_EWORD;
+	if (ctx->commits.nr % BITS_IN_EWORD)
+		alloc++;
+	if (alloc > ctx->bloom_large->word_alloc)
+		BUG("write_graph_chunk_bloom_large: bitmap not large enough");
+
+	trace2_region_enter("commit-graph", "bloom_large", ctx->r);
+	hashwrite_be32(f, ctx->bloom_settings->max_changed_paths);
+	for (i = 0; i < ctx->bloom_large->word_alloc; i++)
+		hashwrite_be64(f, ctx->bloom_large->words[i]);
+	trace2_region_leave("commit-graph", "bloom_large", ctx->r);
+	return 0;
+}
+
 static int oid_compare(const void *_a, const void *_b)
 {
 	const struct object_id *a = (const struct object_id *)_a;
@@ -1398,6 +1456,8 @@ static void trace2_bloom_filter_write_statistics(struct write_commit_graph_conte
 	struct json_writer jw = JSON_WRITER_INIT;

 	jw_object_begin(&jw, 0);
+	jw_object_intmax(&jw, "filter_known_large",
+			 ctx->count_bloom_filter_known_large);
 	jw_object_intmax(&jw, "filter_found_large",
 			 ctx->count_bloom_filter_found_large);
 	jw_object_intmax(&jw, "filter_computed",
@@ -1416,6 +1476,7 @@ static void compute_bloom_filters(struct write_commit_graph_context *ctx)
 	int *sorted_commits;

 	init_bloom_filters();
+	ctx->bloom_large = bitmap_word_alloc(ctx->commits.nr / BITS_IN_EWORD + 1);

 	if (ctx->report_progress)
 		progress = start_delayed_progress(
@@ -1430,21 +1491,28 @@ static void compute_bloom_filters(struct write_commit_graph_context *ctx)
 		&ctx->commits);

 	for (i = 0; i < ctx->commits.nr; i++) {
-		int computed = 0;
 		int pos = sorted_commits[i];
 		struct commit *c = ctx->commits.list[pos];
-		struct bloom_filter *filter = get_or_compute_bloom_filter(
-			ctx->r,
-			c,
-			1,
-			ctx->bloom_settings,
-			&computed);
-		if (computed) {
-			ctx->count_bloom_filter_computed++;
-			if (filter && !filter->len)
-				ctx->count_bloom_filter_found_large++;
+		if (get_bloom_filter_large_in_graph(ctx->r->objects->commit_graph, c)) {
+			bitmap_set(ctx->bloom_large, pos);
+			ctx->count_bloom_filter_known_large++;
+		} else {
+			int computed = 0;
+			struct bloom_filter *filter = get_or_compute_bloom_filter(
+				ctx->r,
+				c,
+				1,
+				ctx->bloom_settings,
+				&computed);
+			if (computed) {
+				ctx->count_bloom_filter_computed++;
+				if (filter && !filter->len) {
+					bitmap_set(ctx->bloom_large, pos);
+					ctx->count_bloom_filter_found_large++;
+				}
+			}
+			ctx->total_bloom_filter_data_size += sizeof(unsigned char) * filter->len;
 		}
-		ctx->total_bloom_filter_data_size += sizeof(unsigned char) * filter->len;
 		display_progress(progress, i + 1);
 	}

@@ -1764,6 +1832,11 @@ static int write_commit_graph_file(struct write_commit_graph_context *ctx)
 					  + ctx->total_bloom_filter_data_size;
 		chunks[num_chunks].write_fn = write_graph_chunk_bloom_data;
 		num_chunks++;
+		chunks[num_chunks].id = GRAPH_CHUNKID_BLOOMLARGE;
+		chunks[num_chunks].size = sizeof(eword_t) * ctx->bloom_large->word_alloc
+					+ sizeof(uint32_t);
+		chunks[num_chunks].write_fn = write_graph_chunk_bloom_large;
+		num_chunks++;
 	}
 	if (ctx->num_commit_graphs_after > 1) {
 		chunks[num_chunks].id = GRAPH_CHUNKID_BASE;
@@ -2503,6 +2576,7 @@ void free_commit_graph(struct commit_graph *g)
 	}
 	free(g->filename);
 	free(g->bloom_filter_settings);
+	bitmap_free(g->bloom_large);
 	free(g);
 }

diff --git a/commit-graph.h b/commit-graph.h
index d9acb22bac..9afb1477d5 100644
--- a/commit-graph.h
+++ b/commit-graph.h
@@ -4,6 +4,7 @@
 #include "git-compat-util.h"
 #include "object-store.h"
 #include "oidset.h"
+#include "ewah/ewok.h"

 #define GIT_TEST_COMMIT_GRAPH "GIT_TEST_COMMIT_GRAPH"
 #define GIT_TEST_COMMIT_GRAPH_DIE_ON_PARSE "GIT_TEST_COMMIT_GRAPH_DIE_ON_PARSE"
@@ -50,6 +51,9 @@ void load_commit_graph_info(struct repository *r, struct commit *item);
 struct tree *get_commit_tree_in_graph(struct repository *r,
 				      const struct commit *c);

+int get_bloom_filter_large_in_graph(struct commit_graph *g,
+				    const struct commit *c);
+
 struct commit_graph {
 	const unsigned char *data;
 	size_t data_len;
@@ -71,6 +75,10 @@ struct commit_graph {
 	const unsigned char *chunk_base_graphs;
 	const unsigned char *chunk_bloom_indexes;
 	const unsigned char *chunk_bloom_data;
+	const unsigned char *chunk_bloom_large_filters;
+
+	struct bitmap *bloom_large;
+	size_t bloom_large_alloc;

 	struct bloom_filter_settings *bloom_filter_settings;
 };
@@ -83,6 +91,8 @@ struct commit_graph *read_commit_graph_one(struct repository *r,
 struct commit_graph *parse_commit_graph(struct repository *r,
 					void *graph_map, size_t graph_size);

+void prepare_commit_graph_bloom_large(struct commit_graph *g);
+
 /*
  * Return 1 if and only if the repository has a commit-graph
  * file and generation numbers are computed in that file.
diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
index 21b67677ef..6859d85369 100755
--- a/t/t4216-log-bloom.sh
+++ b/t/t4216-log-bloom.sh
@@ -33,7 +33,7 @@ test_expect_success 'setup test - repo, commits, commit graph, log outputs' '
 	git commit-graph write --reachable --changed-paths
 '
 graph_read_expect () {
-	NUM_CHUNKS=5
+	NUM_CHUNKS=6
 	cat >expect <<- EOF
 	header: 43475048 1 1 $NUM_CHUNKS 0
 	num_commits: $1
@@ -262,5 +262,28 @@ test_expect_success 'correctly report changes over limit' '
 		done
 	)
 '
+test_bloom_filters_computed () {
+	commit_graph_args=$1
+	bloom_trace_prefix="{\"filter_known_large\":$2,\"filter_found_large\":$3,\"filter_computed\":$4"
+	rm -f "$TRASH_DIRECTORY/trace.event" &&
+	GIT_TRACE2_EVENT="$TRASH_DIRECTORY/trace.event" git commit-graph write $commit_graph_args &&
+	grep "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.event"
+}
+
+test_expect_success 'Bloom generation does not recompute too-large filters' '
+	(
+		cd limits &&
+
+		# start from scratch and rebuild
+		rm -f .git/objects/info/commit-graph &&
+		GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=10 \
+			git commit-graph write --reachable --changed-paths \
+			--split=replace &&
+		test_commit c1 filter &&
+
+		test_bloom_filters_computed "--reachable --changed-paths --split=replace" \
+			2 0 1
+	)
+'

 test_done
--
2.28.0.rc1.13.ge78abce653


  reply	other threads:[~2020-08-11 22:05 UTC|newest]

Thread overview: 117+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-03 18:57 [PATCH 00/10] more miscellaneous Bloom filter improvements Taylor Blau
2020-08-03 18:57 ` [PATCH 01/10] commit-graph: introduce 'get_bloom_filter_settings()' Taylor Blau
2020-08-04  7:24   ` Jeff King
2020-08-04 20:08     ` Taylor Blau
2020-08-03 18:57 ` [PATCH 02/10] commit-graph: pass a 'struct repository *' in more places Taylor Blau
2020-08-03 18:57 ` [PATCH 03/10] t4216: use an '&&'-chain Taylor Blau
2020-08-03 18:57 ` [PATCH 04/10] t/helper/test-read-graph.c: prepare repo settings Taylor Blau
2020-08-03 18:57 ` [PATCH 05/10] commit-graph: respect 'commitgraph.readChangedPaths' Taylor Blau
2020-08-03 18:57 ` [PATCH 06/10] commit-graph.c: sort index into commits list Taylor Blau
2020-08-04 12:31   ` Derrick Stolee
2020-08-04 20:10     ` Taylor Blau
2020-08-03 18:57 ` [PATCH 07/10] commit-graph: add large-filters bitmap chunk Taylor Blau
2020-08-03 18:59   ` Taylor Blau
2020-08-04 12:57   ` Derrick Stolee
2020-08-03 18:57 ` [PATCH 08/10] bloom: split 'get_bloom_filter()' in two Taylor Blau
2020-08-04 13:00   ` Derrick Stolee
2020-08-04 20:12     ` Taylor Blau
2020-08-03 18:57 ` [PATCH 09/10] commit-graph: rename 'split_commit_graph_opts' Taylor Blau
2020-08-03 18:57 ` [PATCH 10/10] builtin/commit-graph.c: introduce '--max-new-filters=<n>' Taylor Blau
2020-08-04 13:03   ` Derrick Stolee
2020-08-04 20:14     ` Taylor Blau
2020-08-05 17:01 ` [PATCH v2 00/14] more miscellaneous Bloom filter improvements Taylor Blau
2020-08-05 17:01   ` [PATCH v2 01/14] commit-graph: introduce 'get_bloom_filter_settings()' Taylor Blau
2020-08-05 17:02   ` [PATCH v2 02/14] t4216: use an '&&'-chain Taylor Blau
2020-08-05 17:02   ` [PATCH v2 03/14] commit-graph: pass a 'struct repository *' in more places Taylor Blau
2020-08-05 17:02   ` [PATCH v2 04/14] t/helper/test-read-graph.c: prepare repo settings Taylor Blau
2020-08-05 17:02   ` [PATCH v2 05/14] commit-graph: respect 'commitGraph.readChangedPaths' Taylor Blau
2020-08-05 17:02   ` [PATCH v2 06/14] commit-graph.c: store maximum changed paths Taylor Blau
2020-08-05 17:02   ` [PATCH v2 07/14] bloom: split 'get_bloom_filter()' in two Taylor Blau
2020-08-05 17:02   ` [PATCH v2 08/14] bloom: use provided 'struct bloom_filter_settings' Taylor Blau
2020-08-05 17:02   ` [PATCH v2 09/14] bloom/diff: properly short-circuit on max_changes Taylor Blau
2020-08-05 17:02   ` [PATCH v2 10/14] commit-graph.c: sort index into commits list Taylor Blau
2020-08-05 17:02   ` [PATCH v2 11/14] csum-file.h: introduce 'hashwrite_be64()' Taylor Blau
2020-08-05 17:02   ` [PATCH v2 12/14] commit-graph: add large-filters bitmap chunk Taylor Blau
2020-08-05 21:01     ` Junio C Hamano
2020-08-05 21:17       ` Taylor Blau
2020-08-05 22:21         ` Junio C Hamano
2020-08-05 22:25           ` Taylor Blau
2020-08-11 13:48             ` Taylor Blau
2020-08-11 18:59               ` Junio C Hamano
2020-08-05 17:03   ` [PATCH v2 13/14] commit-graph: rename 'split_commit_graph_opts' Taylor Blau
2020-08-05 17:03   ` [PATCH v2 14/14] builtin/commit-graph.c: introduce '--max-new-filters=<n>' Taylor Blau
2020-08-11 20:51 ` [PATCH v3 00/14] more miscellaneous Bloom filter improvements Taylor Blau
2020-08-11 20:51   ` [PATCH v3 01/14] commit-graph: introduce 'get_bloom_filter_settings()' Taylor Blau
2020-08-11 21:18     ` SZEDER Gábor
2020-08-11 21:21       ` Taylor Blau
2020-08-11 21:27         ` SZEDER Gábor
2020-08-11 21:34           ` Taylor Blau
2020-08-11 23:55             ` SZEDER Gábor
2020-08-12 11:48               ` Derrick Stolee
2020-08-14 20:17                 ` Taylor Blau
2020-08-11 20:51   ` [PATCH v3 02/14] t4216: use an '&&'-chain Taylor Blau
2020-08-11 20:51   ` [PATCH v3 03/14] commit-graph: pass a 'struct repository *' in more places Taylor Blau
2020-08-11 20:51   ` [PATCH v3 04/14] t/helper/test-read-graph.c: prepare repo settings Taylor Blau
2020-08-11 20:51   ` [PATCH v3 05/14] commit-graph: respect 'commitGraph.readChangedPaths' Taylor Blau
2020-08-11 20:51   ` [PATCH v3 06/14] commit-graph.c: store maximum changed paths Taylor Blau
2020-08-11 20:51   ` [PATCH v3 07/14] bloom: split 'get_bloom_filter()' in two Taylor Blau
2020-08-11 20:51   ` [PATCH v3 11/14] csum-file.h: introduce 'hashwrite_be64()' Taylor Blau
2020-08-11 20:51   ` [PATCH v3 08/14] bloom: use provided 'struct bloom_filter_settings' Taylor Blau
2020-08-11 20:51   ` [PATCH v3 09/14] bloom/diff: properly short-circuit on max_changes Taylor Blau
2020-08-11 20:52   ` [PATCH v3 10/14] commit-graph.c: sort index into commits list Taylor Blau
2020-08-11 20:52   ` [PATCH v3 12/14] commit-graph: add large-filters bitmap chunk Taylor Blau
2020-08-11 21:11     ` Derrick Stolee
2020-08-11 21:18       ` Taylor Blau
2020-08-11 22:05         ` Taylor Blau [this message]
2020-08-19 13:35     ` SZEDER Gábor
2020-09-02 20:23       ` Taylor Blau
2020-09-01 14:35     ` SZEDER Gábor
2020-09-02 20:40       ` Taylor Blau
2020-08-11 20:52   ` [PATCH v3 13/14] commit-graph: rename 'split_commit_graph_opts' Taylor Blau
2020-08-19  9:56     ` SZEDER Gábor
2020-09-02 21:02       ` Taylor Blau
2020-08-11 20:52   ` [PATCH v3 14/14] builtin/commit-graph.c: introduce '--max-new-filters=<n>' Taylor Blau
2020-08-12 11:49     ` SZEDER Gábor
2020-08-14 20:20       ` Taylor Blau
2020-08-17 22:50         ` SZEDER Gábor
2020-09-02 21:03           ` Taylor Blau
2020-08-12 12:29     ` Derrick Stolee
2020-08-14 20:10       ` Taylor Blau
2020-08-18 22:23     ` SZEDER Gábor
2020-09-03 16:35       ` Taylor Blau
2020-08-19  8:20     ` SZEDER Gábor
2020-09-03 16:42       ` Taylor Blau
2020-09-04  8:50         ` SZEDER Gábor
2020-09-01 14:36     ` SZEDER Gábor
2020-09-03 18:49       ` Taylor Blau
2020-09-03 21:45   ` [PATCH v3 00/14] more miscellaneous Bloom filter improvements Junio C Hamano
2020-09-03 22:33     ` Taylor Blau
2020-09-03 22:45 ` [PATCH v4 " Taylor Blau
2020-09-03 22:46   ` [PATCH v4 01/14] commit-graph: introduce 'get_bloom_filter_settings()' Taylor Blau
2020-09-03 22:46   ` [PATCH v4 02/14] t4216: use an '&&'-chain Taylor Blau
2020-09-03 22:46   ` [PATCH v4 03/14] commit-graph: pass a 'struct repository *' in more places Taylor Blau
2020-09-03 22:46   ` [PATCH v4 04/14] t/helper/test-read-graph.c: prepare repo settings Taylor Blau
2020-09-03 22:46   ` [PATCH v4 05/14] commit-graph: respect 'commitGraph.readChangedPaths' Taylor Blau
2020-09-03 22:46   ` [PATCH v4 06/14] commit-graph.c: store maximum changed paths Taylor Blau
2020-09-03 22:46   ` [PATCH v4 07/14] bloom: split 'get_bloom_filter()' in two Taylor Blau
2020-09-05 17:22     ` Jakub Narębski
2020-09-05 17:38       ` Taylor Blau
2020-09-05 17:50         ` Jakub Narębski
2020-09-05 18:01           ` Taylor Blau
2020-09-05 18:18             ` Jakub Narębski
2020-09-05 18:38               ` Taylor Blau
2020-09-05 18:55                 ` Taylor Blau
2020-09-05 19:04                   ` SZEDER Gábor
2020-09-05 19:49                     ` Taylor Blau
2020-09-06 21:52                       ` Junio C Hamano
2020-09-03 22:46   ` [PATCH v4 08/14] bloom: use provided 'struct bloom_filter_settings' Taylor Blau
2020-09-03 22:46   ` [PATCH v4 09/14] bloom/diff: properly short-circuit on max_changes Taylor Blau
2020-09-03 22:46   ` [PATCH v4 10/14] commit-graph.c: sort index into commits list Taylor Blau
2020-09-03 22:46   ` [PATCH v4 11/14] csum-file.h: introduce 'hashwrite_be64()' Taylor Blau
2020-09-04 20:18     ` René Scharfe
2020-09-04 20:22       ` Taylor Blau
2020-09-03 22:46   ` [PATCH v4 12/14] commit-graph: add large-filters bitmap chunk Taylor Blau
2020-09-03 22:46   ` [PATCH v4 13/14] commit-graph: rename 'split_commit_graph_opts' Taylor Blau
2020-09-04 15:20     ` Taylor Blau
2020-09-03 22:47   ` [PATCH v4 14/14] builtin/commit-graph.c: introduce '--max-new-filters=<n>' Taylor Blau
2020-09-04 14:39   ` [PATCH v4 00/14] more miscellaneous Bloom filter improvements Derrick Stolee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: http://vger.kernel.org/majordomo-info.html

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200811220503.GC66656@syl.lan \
    --to=me@ttaylorr.com \
    --cc=dstolee@microsoft.com \
    --cc=git@vger.kernel.org \
    --cc=gitster@pobox.com \
    --cc=peff@peff.net \
    --cc=stolee@gmail.com \
    --cc=szeder.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
Code repositories for project(s) associated with this public inbox

	https://80x24.org/mirrors/git.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).