[PATCH] doc: tidy asciidoc style

[PATCH] doc: tidy asciidoc style

[Jean-Noël Avila]

This mainly refers to enforcing indentation on additional lines of
items of lists.

Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
---
 Documentation/git-add.txt          |  8 ++--
 Documentation/git-branch.txt       |  8 ++--
 Documentation/git-checkout.txt     | 16 +++----
 Documentation/git-cherry-pick.txt  | 14 +++---
 Documentation/git-diff.txt         | 18 ++++----
 Documentation/git-fetch.txt        |  2 +-
 Documentation/git-format-patch.txt | 14 +++---
 Documentation/git-help.txt         |  4 +-
 Documentation/git-p4.txt           |  8 ++--
 Documentation/git-reset.txt        | 70 +++++++++++++++---------------
 Documentation/git-send-email.txt   |  2 +-
 Documentation/git-tag.txt          | 16 +++----
 Documentation/git-upload-pack.txt  |  1 -
 Documentation/rev-list-options.txt |  6 +--
 14 files changed, 93 insertions(+), 94 deletions(-)

diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt
index 45652fe4a6..37bcab94d5 100644
--- a/Documentation/git-add.txt
+++ b/Documentation/git-add.txt
@@ -58,9 +58,9 @@ OPTIONS
 	specifying `dir` will record not just a file `dir/file1`
 	modified in the working tree, a file `dir/file2` added to
 	the working tree, but also a file `dir/file3` removed from
-	the working tree.  Note that older versions of Git used
+	the working tree). Note that older versions of Git used
 	to ignore removed files; use `--no-all` option if you want
-	to add modified or new files but ignore removed	ones.
+	to add modified or new files but ignore removed ones.
 +
 For more details about the <pathspec> syntax, see the 'pathspec' entry
 in linkgit:gitglossary[7].
@@ -124,7 +124,7 @@ subdirectories).
 --no-ignore-removal::
 	Update the index not only where the working tree has a file
 	matching <pathspec> but also where the index already has an
-	entry.	This adds, modifies, and removes index entries to
+	entry. This adds, modifies, and removes index entries to
 	match the working tree.
 +
 If no <pathspec> is given when `-A` option is used, all
@@ -206,7 +206,7 @@ EXAMPLES
 --------
 
 * Adds content from all `*.txt` files under `Documentation` directory
-and its subdirectories:
+  and its subdirectories:
 +
 ------------
 $ git add Documentation/\*.txt
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt
index bf5316ffa9..3bd83a7cbd 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -297,7 +297,7 @@ $ git checkout my2.6.14
 ------------
 +
 <1> This step and the next one could be combined into a single step with
-"checkout -b my2.6.14 v2.6.14".
+    "checkout -b my2.6.14 v2.6.14".
 
 Delete an unneeded branch::
 +
@@ -309,10 +309,10 @@ $ git branch -D test                                    <2>
 ------------
 +
 <1> Delete the remote-tracking branches "todo", "html" and "man". The next
-'fetch' or 'pull' will create them again unless you configure them not to.
-See linkgit:git-fetch[1].
+    'fetch' or 'pull' will create them again unless you configure them not to.
+    See linkgit:git-fetch[1].
 <2> Delete the "test" branch even if the "master" branch (or whichever branch
-is currently checked out) does not have all commits from the test branch.
+    is currently checked out) does not have all commits from the test branch.
 
 
 NOTES
diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt
index ce7d38b8b7..f8dc7ad180 100644
--- a/Documentation/git-checkout.txt
+++ b/Documentation/git-checkout.txt
@@ -434,14 +434,14 @@ $ git tag foo           <3>
 ------------
 
 <1> creates a new branch 'foo', which refers to commit 'f', and then
-updates HEAD to refer to branch 'foo'. In other words, we'll no longer
-be in detached HEAD state after this command.
+    updates HEAD to refer to branch 'foo'. In other words, we'll no longer
+    be in detached HEAD state after this command.
 
 <2> similarly creates a new branch 'foo', which refers to commit 'f',
-but leaves HEAD detached.
+    but leaves HEAD detached.
 
 <3> creates a new tag 'foo', which refers to commit 'f',
-leaving HEAD detached.
+    leaving HEAD detached.
 
 If we have moved away from commit 'f', then we must first recover its object
 name (typically by using git reflog), and then we can create a reference to
@@ -469,8 +469,8 @@ EXAMPLES
 --------
 
 . The following sequence checks out the `master` branch, reverts
-the `Makefile` to two revisions back, deletes hello.c by
-mistake, and gets it back from the index.
+  the `Makefile` to two revisions back, deletes hello.c by
+  mistake, and gets it back from the index.
 +
 ------------
 $ git checkout master             <1>
@@ -504,7 +504,7 @@ $ git checkout -- hello.c
 ------------
 
 . After working in the wrong branch, switching to the correct
-branch would be done using:
+  branch would be done using:
 +
 ------------
 $ git checkout mytopic
@@ -532,7 +532,7 @@ registered in your index file, so `git diff` would show you what
 changes you made since the tip of the new branch.
 
 . When a merge conflict happens during switching branches with
-the `-m` option, you would see something like this:
+  the `-m` option, you would see something like this:
 +
 ------------
 $ git checkout -m mytopic
diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt
index d35d771fc8..b8cfeec67e 100644
--- a/Documentation/git-cherry-pick.txt
+++ b/Documentation/git-cherry-pick.txt
@@ -213,16 +213,16 @@ $ git reset --merge ORIG_HEAD        <3>
 $ git cherry-pick -Xpatience topic^  <4>
 ------------
 <1> apply the change that would be shown by `git show topic^`.
-In this example, the patch does not apply cleanly, so
-information about the conflict is written to the index and
-working tree and no new commit results.
+    In this example, the patch does not apply cleanly, so
+    information about the conflict is written to the index and
+    working tree and no new commit results.
 <2> summarize changes to be reconciled
 <3> cancel the cherry-pick.  In other words, return to the
-pre-cherry-pick state, preserving any local modifications you had in
-the working tree.
+    pre-cherry-pick state, preserving any local modifications
+    you had in the working tree.
 <4> try to apply the change introduced by `topic^` again,
-spending extra time to avoid mistakes based on incorrectly matching
-context lines.
+    spending extra time to avoid mistakes based on incorrectly
+    matching context lines.
 
 SEE ALSO
 --------
diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt
index 030f162f30..72179d993c 100644
--- a/Documentation/git-diff.txt
+++ b/Documentation/git-diff.txt
@@ -132,9 +132,9 @@ $ git diff HEAD       <3>
 +
 <1> Changes in the working tree not yet staged for the next commit.
 <2> Changes between the index and your last commit; what you
-would be committing if you run "git commit" without "-a" option.
+    would be committing if you run "git commit" without "-a" option.
 <3> Changes in the working tree since your last commit; what you
-would be committing if you run "git commit -a"
+    would be committing if you run "git commit -a"
 
 Comparing with arbitrary commits::
 +
@@ -145,10 +145,10 @@ $ git diff HEAD^ HEAD      <3>
 ------------
 +
 <1> Instead of using the tip of the current branch, compare with the
-tip of "test" branch.
+    tip of "test" branch.
 <2> Instead of comparing with the tip of "test" branch, compare with
-the tip of the current branch, but limit the comparison to the
-file "test".
+    the tip of the current branch, but limit the comparison to the
+    file "test".
 <3> Compare the version before the last commit and the last commit.
 
 Comparing branches::
@@ -162,7 +162,7 @@ $ git diff topic...master  <3>
 <1> Changes between the tips of the topic and the master branches.
 <2> Same as above.
 <3> Changes that occurred on the master branch since when the topic
-branch was started off it.
+    branch was started off it.
 
 Limiting the diff output::
 +
@@ -173,9 +173,9 @@ $ git diff arch/i386 include/asm-i386   <3>
 ------------
 +
 <1> Show only modification, rename, and copy, but not addition
-or deletion.
+    or deletion.
 <2> Show only names and the nature of change, but not actual
-diff output.
+    diff output.
 <3> Limit diff output to named subtrees.
 
 Munging the diff output::
@@ -186,7 +186,7 @@ $ git diff -R                          <2>
 ------------
 +
 <1> Spend extra cycles to find renames, copies and complete
-rewrites (very expensive).
+    rewrites (very expensive).
 <2> Output diff in reverse.
 
 SEE ALSO
diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt
index e319935597..266d63cf11 100644
--- a/Documentation/git-fetch.txt
+++ b/Documentation/git-fetch.txt
@@ -266,7 +266,7 @@ The `pu` branch will be updated even if it is does not fast-forward,
 because it is prefixed with a plus sign; `tmp` will not be.
 
 * Peek at a remote's branch, without configuring the remote in your local
-repository:
+  repository:
 +
 ------------------------------------------------
 $ git fetch git://git.kernel.org/pub/scm/git/git.git maint
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 27304428a1..1af85d404f 100644
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -504,9 +504,9 @@ Toggle it to make sure it is set to `false`. Also, search for
 "mailnews.wraplength" and set the value to 0.
 
 3. Disable the use of format=flowed:
-Edit..Preferences..Advanced..Config Editor.  Search for
-"mailnews.send_plaintext_flowed".
-Toggle it to make sure it is set to `false`.
+   Edit..Preferences..Advanced..Config Editor.  Search for
+   "mailnews.send_plaintext_flowed".
+   Toggle it to make sure it is set to `false`.
 
 After that is done, you should be able to compose email as you
 otherwise would (cut + paste, 'git format-patch' | 'git imap-send', etc),
@@ -629,14 +629,14 @@ EXAMPLES
 --------
 
 * Extract commits between revisions R1 and R2, and apply them on top of
-the current branch using 'git am' to cherry-pick them:
+  the current branch using 'git am' to cherry-pick them:
 +
 ------------
 $ git format-patch -k --stdout R1..R2 | git am -3 -k
 ------------
 
 * Extract all commits which are in the current branch but not in the
-origin branch:
+  origin branch:
 +
 ------------
 $ git format-patch origin
@@ -645,7 +645,7 @@ $ git format-patch origin
 For each commit a separate file is created in the current directory.
 
 * Extract all commits that lead to 'origin' since the inception of the
-project:
+  project:
 +
 ------------
 $ git format-patch --root origin
@@ -664,7 +664,7 @@ Note that non-Git "patch" programs won't understand renaming patches, so
 use it only when you know the recipient uses Git to apply your patch.
 
 * Extract three topmost commits from the current branch and format them
-as e-mailable patches:
+  as e-mailable patches:
 +
 ------------
 $ git format-patch -3
diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt
index aab5453bbb..c318bf87e1 100644
--- a/Documentation/git-help.txt
+++ b/Documentation/git-help.txt
@@ -118,9 +118,9 @@ format is chosen. The following values are currently supported:
 
 * "man": use the 'man' program as usual,
 * "woman": use 'emacsclient' to launch the "woman" mode in emacs
-(this only works starting with emacsclient versions 22),
+  (this only works starting with emacsclient versions 22),
 * "konqueror": use 'kfmclient' to open the man page in a new konqueror
-tab (see 'Note about konqueror' below).
+  tab (see 'Note about konqueror' below).
 
 Values for other tools can be used if there is a corresponding
 `man.<tool>.cmd` configuration entry (see below).
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index f0a0280954..3494a1db3e 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -71,12 +71,12 @@ $ git p4 clone //depot/path/project
 ------------
 This:
 
-1.   Creates an empty Git repository in a subdirectory called 'project'.
+1. Creates an empty Git repository in a subdirectory called 'project'.
 +
-2.   Imports the full contents of the head revision from the given p4
-depot path into a single commit in the Git branch 'refs/remotes/p4/master'.
+2. Imports the full contents of the head revision from the given p4
+   depot path into a single commit in the Git branch 'refs/remotes/p4/master'.
 +
-3.   Creates a local branch, 'master' from this remote and checks it out.
+3. Creates a local branch, 'master' from this remote and checks it out.
 
 To reproduce the entire p4 history in Git, use the '@all' modifier on
 the depot path:
diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt
index 9f69ae8b69..132f8e55f6 100644
--- a/Documentation/git-reset.txt
+++ b/Documentation/git-reset.txt
@@ -115,17 +115,17 @@ $ git pull git://info.example.com/ nitfol  <4>
 ------------
 +
 <1> You are happily working on something, and find the changes
-in these files are in good order.  You do not want to see them
-when you run `git diff`, because you plan to work on other files
-and changes with these files are distracting.
+    in these files are in good order.  You do not want to see them
+    when you run `git diff`, because you plan to work on other files
+    and changes with these files are distracting.
 <2> Somebody asks you to pull, and the changes sound worthy of merging.
 <3> However, you already dirtied the index (i.e. your index does
-not match the `HEAD` commit).  But you know the pull you are going
-to make does not affect `frotz.c` or `filfre.c`, so you revert the
-index changes for these two files.  Your changes in working tree
-remain there.
+    not match the `HEAD` commit).  But you know the pull you are going
+    to make does not affect `frotz.c` or `filfre.c`, so you revert the
+    index changes for these two files.  Your changes in working tree
+    remain there.
 <4> Then you can pull and merge, leaving `frotz.c` and `filfre.c`
-changes still in the working tree.
+    changes still in the working tree.
 
 Undo a commit and redo::
 +
@@ -137,12 +137,12 @@ $ git commit -a -c ORIG_HEAD  <3>
 ------------
 +
 <1> This is most often done when you remembered what you
-just committed is incomplete, or you misspelled your commit
-message, or both.  Leaves working tree as it was before "reset".
+    just committed is incomplete, or you misspelled your commit
+    message, or both.  Leaves working tree as it was before "reset".
 <2> Make corrections to working tree files.
 <3> "reset" copies the old head to `.git/ORIG_HEAD`; redo the
-commit by starting with its log message.  If you do not need to
-edit the message further, you can give `-C` option instead.
+    commit by starting with its log message.  If you do not need to
+    edit the message further, you can give `-C` option instead.
 +
 See also the `--amend` option to linkgit:git-commit[1].
 
@@ -155,9 +155,9 @@ $ git checkout topic/wip   <3>
 ------------
 +
 <1> You have made some commits, but realize they were premature
-to be in the `master` branch.  You want to continue polishing
-them in a topic branch, so create `topic/wip` branch off of the
-current `HEAD`.
+    to be in the `master` branch.  You want to continue polishing
+    them in a topic branch, so create `topic/wip` branch off of the
+    current `HEAD`.
 <2> Rewind the master branch to get rid of those three commits.
 <3> Switch to `topic/wip` branch and keep working.
 
@@ -169,10 +169,10 @@ $ git reset --hard HEAD~3   <1>
 ------------
 +
 <1> The last three commits (`HEAD`, `HEAD^`, and `HEAD~2`) were bad
-and you do not want to ever see them again.  Do *not* do this if
-you have already given these commits to somebody else.  (See the
-"RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] for
-the implications of doing so.)
+    and you do not want to ever see them again.  Do *not* do this if
+    you have already given these commits to somebody else.  (See the
+    "RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1]
+    for the implications of doing so.)
 
 Undo a merge or pull::
 +
@@ -189,18 +189,18 @@ $ git reset --hard ORIG_HEAD       <4>
 ------------
 +
 <1> Try to update from the upstream resulted in a lot of
-conflicts; you were not ready to spend a lot of time merging
-right now, so you decide to do that later.
+    conflicts; you were not ready to spend a lot of time merging
+    right now, so you decide to do that later.
 <2> "pull" has not made merge commit, so `git reset --hard`
-which is a synonym for `git reset --hard HEAD` clears the mess
-from the index file and the working tree.
+    which is a synonym for `git reset --hard HEAD` clears the mess
+    from the index file and the working tree.
 <3> Merge a topic branch into the current branch, which resulted
-in a fast-forward.
+    in a fast-forward.
 <4> But you decided that the topic branch is not ready for public
-consumption yet.  "pull" or "merge" always leaves the original
-tip of the current branch in `ORIG_HEAD`, so resetting hard to it
-brings your index file and the working tree back to that state,
-and resets the tip of the branch to that commit.
+    consumption yet.  "pull" or "merge" always leaves the original
+    tip of the current branch in `ORIG_HEAD`, so resetting hard to it
+    brings your index file and the working tree back to that state,
+    and resets the tip of the branch to that commit.
 
 Undo a merge or pull inside a dirty working tree::
 +
@@ -214,14 +214,14 @@ $ git reset --merge ORIG_HEAD      <2>
 ------------
 +
 <1> Even if you may have local modifications in your
-working tree, you can safely say `git pull` when you know
-that the change in the other branch does not overlap with
-them.
+    working tree, you can safely say `git pull` when you know
+    that the change in the other branch does not overlap with
+    them.
 <2> After inspecting the result of the merge, you may find
-that the change in the other branch is unsatisfactory.  Running
-`git reset --hard ORIG_HEAD` will let you go back to where you
-were, but it will discard your local changes, which you do not
-want.  `git reset --merge` keeps your local changes.
+    that the change in the other branch is unsatisfactory.  Running
+    `git reset --hard ORIG_HEAD` will let you go back to where you
+    were, but it will discard your local changes, which you do not
+    want.  `git reset --merge` keeps your local changes.
 
 
 Interrupted workflow::
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index 62c6c76f27..1afe9fc858 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -33,7 +33,7 @@ This is what linkgit:git-format-patch[1] generates.  Most headers and MIME
 formatting are ignored.
 
 2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl'
-script
+   script
 +
 This format expects the first line of the file to contain the "Cc:" value
 and the "Subject:" of the message as the second line.
diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt
index f2d644e3af..a74e7b926d 100644
--- a/Documentation/git-tag.txt
+++ b/Documentation/git-tag.txt
@@ -237,16 +237,16 @@ your repository directly), then others will have already seen
 the old tag. In that case you can do one of two things:
 
 . The sane thing.
-Just admit you screwed up, and use a different name. Others have
-already seen one tag-name, and if you keep the same name, you
-may be in the situation that two people both have "version X",
-but they actually have 'different' "X"'s.  So just call it "X.1"
-and be done with it.
+  Just admit you screwed up, and use a different name. Others have
+  already seen one tag-name, and if you keep the same name, you
+  may be in the situation that two people both have "version X",
+  but they actually have 'different' "X"'s.  So just call it "X.1"
+  and be done with it.
 
 . The insane thing.
-You really want to call the new version "X" too, 'even though'
-others have already seen the old one. So just use 'git tag -f'
-again, as if you hadn't already published the old one.
+  You really want to call the new version "X" too, 'even though'
+  others have already seen the old one. So just use 'git tag -f'
+  again, as if you hadn't already published the old one.
 
 However, Git does *not* (and it should not) change tags behind
 users back. So if somebody already got the old tag, doing a
diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt
index 998f52d3df..9822c1eb1a 100644
--- a/Documentation/git-upload-pack.txt
+++ b/Documentation/git-upload-pack.txt
@@ -22,7 +22,6 @@ The UI for the protocol is on the 'git fetch-pack' side, and the
 program pair is meant to be used to pull updates from a remote
 repository.  For push operations, see 'git send-pack'.
 
-
 OPTIONS
 -------
 
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt
index 91b3a72bda..8a4867998e 100644
--- a/Documentation/rev-list-options.txt
+++ b/Documentation/rev-list-options.txt
@@ -270,13 +270,13 @@ depending on a few rules:
 +
 --
 1. If the starting point is specified as `ref@{Nth}`, show the index
-format.
+   format.
 +
 2. If the starting point was specified as `ref@{now}`, show the
-timestamp format.
+   timestamp format.
 +
 3. If neither was used, but `--date` was given on the command line, show
-the timestamp in the format requested by `--date`.
+   the timestamp in the format requested by `--date`.
 +
 4. Otherwise, show the index format.
 --
-- 
2.20.1

Re: [PATCH] doc: tidy asciidoc style

[Junio C Hamano]

Jean-Noël Avila <jn.avila@free.fr> writes:

> This mainly refers to enforcing indentation on additional lines of
> items of lists.
>
> Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
> ---

I somehow misread the title as "tiny asciidoc style (fixes)".  This
is a huge clean-up.  Thanks for working on it.

> diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt
> index 45652fe4a6..37bcab94d5 100644
> --- a/Documentation/git-add.txt
> +++ b/Documentation/git-add.txt
> @@ -58,9 +58,9 @@ OPTIONS
>  	specifying `dir` will record not just a file `dir/file1`
>  	modified in the working tree, a file `dir/file2` added to
>  	the working tree, but also a file `dir/file3` removed from
> -	the working tree.  Note that older versions of Git used
> +	the working tree). Note that older versions of Git used

Good.

> -	to add modified or new files but ignore removed	ones.
> +	to add modified or new files but ignore removed ones.

For those reading from sidelines, the difference here is that the
original has HT between "removed" and "ones" ;-)

Two questions.

 - Does this affect correctness in formatting?  I thought not.

 - How are you finding these?  

> @@ -206,7 +206,7 @@ EXAMPLES
>  --------
>  
>  * Adds content from all `*.txt` files under `Documentation` directory
> -and its subdirectories:
> +  and its subdirectories:

OK.  Just to make sure (read: not an objection to the change), this
does not affect the formatted result, right?

Re: [PATCH] doc: tidy asciidoc style

[Junio C Hamano]

Junio C Hamano <gitster@pobox.com> writes:

> Jean-Noël Avila <jn.avila@free.fr> writes:
>
>> This mainly refers to enforcing indentation on additional lines of
>> items of lists.
>>
>> Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
>> ---
>
> I somehow misread the title as "tiny asciidoc style (fixes)".  This
> is a huge clean-up.  Thanks for working on it.
>
>> diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt
>> index 45652fe4a6..37bcab94d5 100644
>> --- a/Documentation/git-add.txt
>> +++ b/Documentation/git-add.txt
>> @@ -58,9 +58,9 @@ OPTIONS
>>  	specifying `dir` will record not just a file `dir/file1`
>>  	modified in the working tree, a file `dir/file2` added to
>>  	the working tree, but also a file `dir/file3` removed from
>> -	the working tree.  Note that older versions of Git used
>> +	the working tree). Note that older versions of Git used
>
> Good.
> ...
> OK.  Just to make sure (read: not an objection to the change), this
> does not affect the formatted result, right?

Answering to myself.  Documentation/doc-diff seems to find only the
")" difference we see above and nothing else.  After I sent my
earlier response, I finished skimming the diff and the changes all
looked OK.

Thanks, again.

Re: [PATCH] doc: tidy asciidoc style

[Jean-Noël AVILA]

On Wednesday, 23 January 2019 20:36:46 CET Junio C Hamano wrote:

> I somehow misread the title as "tiny asciidoc style (fixes)".  This
> is a huge clean-up.  Thanks for working on it.
> 

These styling fixes were raised by warning of po4a when processing 
the files. Otherwise, there's no hurry in pushing them.

> 
> Two questions.
> 
>  - Does this affect correctness in formatting?  I thought not.
> 

This does not affect the formatting of  man pages. For html pages,
the content is different but there's a rule that repeated spaces are cranked
into a single space before rendering in the browser.

>  - How are you finding these?  

Editing the intermediate po for translation, the tabs are shown as special
characters \t (in case there's some formatting  to preserve).

Re: [PATCH] doc: tidy asciidoc style

[Junio C Hamano]

Jean-Noël AVILA <jn.avila@free.fr> writes:

> These styling fixes were raised by warning of po4a when processing 
> the files. Otherwise, there's no hurry in pushing them.

Yeah, but as we postpone it, all the topics in flight that wants to
touch documentation may get blocked (or cause this large patch to be
redone and reexamined).  I think we'd rather fast-track it after
reading it over carefully (which now I have done).

> This does not affect the formatting of  man pages. For html pages,
> the content is different but there's a rule that repeated spaces are cranked
> into a single space before rendering in the browser.

Yup, that is exactly what I thought and the answer I was after.
Thanks for confirming.

>
>>  - How are you finding these?  
>
> Editing the intermediate po for translation, the tabs are shown as special
> characters \t (in case there's some formatting  to preserve).

Ah, that makes sense.