From: "SZEDER Gábor" <szeder.dev@gmail.com>
To: Junio C Hamano <gitster@pobox.com>
Cc: "Jeff King" <peff@peff.net>,
git@vger.kernel.org, "SZEDER Gábor" <szeder.dev@gmail.com>
Subject: [PATCH v3 3/8] test-lib: parse command line options earlier
Date: Sun, 30 Dec 2018 20:16:24 +0100 [thread overview]
Message-ID: <20181230191629.3232-4-szeder.dev@gmail.com> (raw)
In-Reply-To: <20181230191629.3232-1-szeder.dev@gmail.com>
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error. It looks for '--valgrind' as well, to
set up some Valgrind-specific stuff. These all happen before the
actual option parsing loop, and the conditions looking for these
options look a bit odd, too. They are not completely correct, either,
because in a bogus invocation like './t1234-foo.sh -r --tee' they
recognize '--tee', although it should be handled as the required
argument of the '-r' option. This patch series will add two more
options to look out for early, and, in addition, will have to extract
these options' stuck arguments (i.e. '--opt=arg') as well.
So let's move the option parsing loop and the couple of related
conditions following it earlier in 'test-lib.sh', before the place
where the test script is executed again for '--tee' and its friends.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
t/test-lib.sh | 228 ++++++++++++++++++++++++++------------------------
1 file changed, 119 insertions(+), 109 deletions(-)
diff --git a/t/test-lib.sh b/t/test-lib.sh
index ed7267962f..fcc04afdff 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -71,13 +71,125 @@ then
exit 1
fi
+# Parse options while taking care to leave $@ intact, so we will still
+# have all the original command line options when executing the test
+# script again for '--tee' and '--verbose-log' below.
+store_arg_to=
+prev_opt=
+for opt
+do
+ if test -n "$store_arg_to"
+ then
+ eval $store_arg_to=\$opt
+ store_arg_to=
+ prev_opt=
+ continue
+ fi
+
+ case "$opt" in
+ -d|--d|--de|--deb|--debu|--debug)
+ debug=t ;;
+ -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
+ immediate=t ;;
+ -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
+ GIT_TEST_LONG=t; export GIT_TEST_LONG ;;
+ -r)
+ store_arg_to=run_list
+ ;;
+ --run=*)
+ run_list=${opt#--*=} ;;
+ -h|--h|--he|--hel|--help)
+ help=t ;;
+ -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
+ verbose=t ;;
+ --verbose-only=*)
+ verbose_only=${opt#--*=}
+ ;;
+ -q|--q|--qu|--qui|--quie|--quiet)
+ # Ignore --quiet under a TAP::Harness. Saying how many tests
+ # passed without the ok/not ok details is always an error.
+ test -z "$HARNESS_ACTIVE" && quiet=t ;;
+ --with-dashes)
+ with_dashes=t ;;
+ --no-color)
+ color= ;;
+ --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
+ valgrind=memcheck
+ tee=t
+ ;;
+ --valgrind=*)
+ valgrind=${opt#--*=}
+ tee=t
+ ;;
+ --valgrind-only=*)
+ valgrind_only=${opt#--*=}
+ tee=t
+ ;;
+ --tee)
+ tee=t ;;
+ --root=*)
+ root=${opt#--*=} ;;
+ --chain-lint)
+ GIT_TEST_CHAIN_LINT=1 ;;
+ --no-chain-lint)
+ GIT_TEST_CHAIN_LINT=0 ;;
+ -x)
+ # Some test scripts can't be reliably traced with '-x',
+ # unless the test is run with a Bash version supporting
+ # BASH_XTRACEFD (introduced in Bash v4.1). Check whether
+ # this test is marked as such, and ignore '-x' if it
+ # isn't executed with a suitable Bash version.
+ if test -z "$test_untraceable" || {
+ test -n "$BASH_VERSION" && {
+ test ${BASH_VERSINFO[0]} -gt 4 || {
+ test ${BASH_VERSINFO[0]} -eq 4 &&
+ test ${BASH_VERSINFO[1]} -ge 1
+ }
+ }
+ }
+ then
+ trace=t
+ else
+ echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD"
+ fi
+ ;;
+ -V|--verbose-log)
+ verbose_log=t
+ tee=t
+ ;;
+ *)
+ echo "error: unknown test option '$opt'" >&2; exit 1 ;;
+ esac
+
+ prev_opt=$opt
+done
+if test -n "$store_arg_to"
+then
+ echo "error: $prev_opt requires an argument" >&2
+ exit 1
+fi
+
+if test -n "$valgrind_only"
+then
+ test -z "$valgrind" && valgrind=memcheck
+ test -z "$verbose" && verbose_only="$valgrind_only"
+elif test -n "$valgrind"
+then
+ test -z "$verbose_log" && verbose=t
+fi
+
+if test -n "$trace" && test -z "$verbose_log"
+then
+ verbose=t
+fi
+
# if --tee was passed, write the output not only to the terminal, but
# additionally to the file test-results/$BASENAME.out, too.
-case "$GIT_TEST_TEE_STARTED, $* " in
-done,*)
- # do not redirect again
- ;;
-*' --tee '*|*' --va'*|*' -V '*|*' --verbose-log '*)
+if test "$GIT_TEST_TEE_STARTED" = "done"
+then
+ : # do not redirect again
+elif test -n "$tee"
+then
mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results"
BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)"
@@ -94,8 +206,7 @@ done,*)
echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE"
test "$(cat "$BASE.exit")" = 0
exit
- ;;
-esac
+fi
# For repeatability, reset the environment to known value.
# TERM is sanitized below, after saving color control sequences.
@@ -193,7 +304,7 @@ fi
# Add libc MALLOC and MALLOC_PERTURB test
# only if we are not executing the test with valgrind
-if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
+if test -n "$valgrind" ||
test -n "$TEST_NO_MALLOC_CHECK"
then
setup_malloc_check () {
@@ -264,107 +375,6 @@ test "x$TERM" != "xdumb" && (
) &&
color=t
-store_arg_to=
-prev_opt=
-for opt
-do
- if test -n "$store_arg_to"
- then
- eval $store_arg_to=\$opt
- store_arg_to=
- prev_opt=
- continue
- fi
-
- case "$opt" in
- -d|--d|--de|--deb|--debu|--debug)
- debug=t ;;
- -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
- immediate=t ;;
- -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
- GIT_TEST_LONG=t; export GIT_TEST_LONG ;;
- -r)
- store_arg_to=run_list
- ;;
- --run=*)
- run_list=${opt#--*=} ;;
- -h|--h|--he|--hel|--help)
- help=t ;;
- -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
- verbose=t ;;
- --verbose-only=*)
- verbose_only=${opt#--*=}
- ;;
- -q|--q|--qu|--qui|--quie|--quiet)
- # Ignore --quiet under a TAP::Harness. Saying how many tests
- # passed without the ok/not ok details is always an error.
- test -z "$HARNESS_ACTIVE" && quiet=t ;;
- --with-dashes)
- with_dashes=t ;;
- --no-color)
- color= ;;
- --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
- valgrind=memcheck ;;
- --valgrind=*)
- valgrind=${opt#--*=} ;;
- --valgrind-only=*)
- valgrind_only=${opt#--*=} ;;
- --tee)
- ;; # was handled already
- --root=*)
- root=${opt#--*=} ;;
- --chain-lint)
- GIT_TEST_CHAIN_LINT=1 ;;
- --no-chain-lint)
- GIT_TEST_CHAIN_LINT=0 ;;
- -x)
- # Some test scripts can't be reliably traced with '-x',
- # unless the test is run with a Bash version supporting
- # BASH_XTRACEFD (introduced in Bash v4.1). Check whether
- # this test is marked as such, and ignore '-x' if it
- # isn't executed with a suitable Bash version.
- if test -z "$test_untraceable" || {
- test -n "$BASH_VERSION" && {
- test ${BASH_VERSINFO[0]} -gt 4 || {
- test ${BASH_VERSINFO[0]} -eq 4 &&
- test ${BASH_VERSINFO[1]} -ge 1
- }
- }
- }
- then
- trace=t
- else
- echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD"
- fi
- ;;
- -V|--verbose-log)
- verbose_log=t ;;
- *)
- echo "error: unknown test option '$opt'" >&2; exit 1 ;;
- esac
-
- prev_opt=$opt
-done
-if test -n "$store_arg_to"
-then
- echo "error: $prev_opt requires an argument" >&2
- exit 1
-fi
-
-if test -n "$valgrind_only"
-then
- test -z "$valgrind" && valgrind=memcheck
- test -z "$verbose" && verbose_only="$valgrind_only"
-elif test -n "$valgrind"
-then
- test -z "$verbose_log" && verbose=t
-fi
-
-if test -n "$trace" && test -z "$verbose_log"
-then
- verbose=t
-fi
-
if test -n "$color"
then
# Save the color control sequences now rather than run tput
--
2.20.1.151.gec613c4b75
next prev parent reply other threads:[~2018-12-30 19:17 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-04 16:34 [RFC PATCH 0/3] test-lib: add the '--stress' option to help reproduce occasional failures in flaky tests SZEDER Gábor
2018-12-04 16:34 ` [PATCH 1/3] test-lib: consolidate naming of test-results paths SZEDER Gábor
2018-12-05 4:57 ` Jeff King
2018-12-04 16:34 ` [PATCH 2/3] test-lib-functions: introduce the 'test_set_port' helper function SZEDER Gábor
2018-12-05 5:17 ` Jeff King
2018-12-05 12:20 ` SZEDER Gábor
2018-12-05 21:59 ` Jeff King
2018-12-04 16:34 ` [RFC PATCH 3/3] test-lib: add the '--stress' option to run a test repeatedly under load SZEDER Gábor
2018-12-04 17:04 ` Ævar Arnfjörð Bjarmason
2018-12-04 17:37 ` SZEDER Gábor
2018-12-05 5:46 ` Jeff King
2018-12-04 18:11 ` Ævar Arnfjörð Bjarmason
2018-12-05 5:50 ` Jeff King
2018-12-05 12:07 ` SZEDER Gábor
2018-12-05 14:01 ` Ævar Arnfjörð Bjarmason
2018-12-05 14:39 ` SZEDER Gábor
2018-12-05 19:59 ` Ævar Arnfjörð Bjarmason
2018-12-05 5:44 ` Jeff King
2018-12-05 10:34 ` SZEDER Gábor
2018-12-05 21:36 ` Jeff King
2018-12-06 0:22 ` Junio C Hamano
2018-12-06 5:35 ` Jeff King
2018-12-06 6:41 ` Junio C Hamano
2018-12-06 22:56 ` SZEDER Gábor
2018-12-07 1:03 ` Jeff King
2018-12-05 14:01 ` SZEDER Gábor
2018-12-05 21:56 ` Jeff King
2018-12-06 23:10 ` SZEDER Gábor
2018-12-07 1:14 ` Jeff King
2018-12-09 22:56 ` [PATCH v2 0/7] test-lib: add the '--stress' option to help reproduce occasional failures in flaky tests SZEDER Gábor
2018-12-09 22:56 ` [PATCH v2 1/7] test-lib: translate SIGTERM and SIGHUP to an exit SZEDER Gábor
2018-12-11 10:57 ` Jeff King
2018-12-09 22:56 ` [PATCH v2 2/7] test-lib: parse some --options earlier SZEDER Gábor
2018-12-11 11:09 ` Jeff King
2018-12-11 12:42 ` SZEDER Gábor
2018-12-17 21:44 ` Jeff King
2018-12-30 19:04 ` SZEDER Gábor
2019-01-03 4:53 ` Jeff King
2018-12-09 22:56 ` [PATCH v2 3/7] test-lib: consolidate naming of test-results paths SZEDER Gábor
2018-12-09 22:56 ` [PATCH v2 4/7] test-lib: set $TRASH_DIRECTORY earlier SZEDER Gábor
2018-12-09 22:56 ` [PATCH v2 5/7] test-lib: extract Bash version check for '-x' tracing SZEDER Gábor
2018-12-09 22:56 ` [PATCH v2 6/7] test-lib-functions: introduce the 'test_set_port' helper function SZEDER Gábor
2018-12-09 22:56 ` [PATCH v2 7/7] test-lib: add the '--stress' option to run a test repeatedly under load SZEDER Gábor
2018-12-10 1:34 ` [PATCH] fixup! " SZEDER Gábor
2018-12-11 11:16 ` [PATCH v2 0/7] test-lib: add the '--stress' option to help reproduce occasional failures in flaky tests Jeff King
2018-12-30 19:16 ` [PATCH v3 0/8] " SZEDER Gábor
2018-12-30 19:16 ` [PATCH v3 1/8] test-lib: translate SIGTERM and SIGHUP to an exit SZEDER Gábor
2018-12-30 19:16 ` [PATCH v3 2/8] test-lib: parse options in a for loop to keep $@ intact SZEDER Gábor
2018-12-30 19:16 ` SZEDER Gábor [this message]
2018-12-30 19:16 ` [PATCH v3 4/8] test-lib: consolidate naming of test-results paths SZEDER Gábor
2018-12-30 19:16 ` [PATCH v3 5/8] test-lib: set $TRASH_DIRECTORY earlier SZEDER Gábor
2018-12-30 22:44 ` SZEDER Gábor
2018-12-30 22:48 ` [PATCH v3.1 " SZEDER Gábor
2018-12-30 19:16 ` [PATCH v3 6/8] test-lib: extract Bash version check for '-x' tracing SZEDER Gábor
2018-12-31 17:14 ` Carlo Arenas
2018-12-30 19:16 ` [PATCH v3 7/8] test-lib-functions: introduce the 'test_set_port' helper function SZEDER Gábor
2018-12-30 19:16 ` [PATCH v3 8/8] test-lib: add the '--stress' option to run a test repeatedly under load SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 0/8] test-lib: add the '--stress' option to help reproduce occasional failures in flaky tests SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 1/8] test-lib: translate SIGTERM and SIGHUP to an exit SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 2/8] test-lib: extract Bash version check for '-x' tracing SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 3/8] test-lib: parse options in a for loop to keep $@ intact SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 4/8] test-lib: parse command line options earlier SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 5/8] test-lib: consolidate naming of test-results paths SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 6/8] test-lib: set $TRASH_DIRECTORY earlier SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 7/8] test-lib-functions: introduce the 'test_set_port' helper function SZEDER Gábor
2019-01-05 1:08 ` [PATCH v4 8/8] test-lib: add the '--stress' option to run a test repeatedly under load SZEDER Gábor
2019-01-07 8:49 ` [PATCH v4 0/8] test-lib: add the '--stress' option to help reproduce occasional failures in flaky tests Jeff King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181230191629.3232-4-szeder.dev@gmail.com \
--to=szeder.dev@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=peff@peff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).