From: Brandon Williams <bmwill@google.com>
To: Antonio Ospite <ao2@ao2.it>
Cc: git@vger.kernel.org, "Daniel Graña" <dangra@gmail.com>,
"Jonathan Nieder" <jrnieder@gmail.com>,
"Richard Hartmann" <richih.mailinglist@gmail.com>,
"Stefan Beller" <sbeller@google.com>
Subject: Re: [PATCH v3 7/7] submodule: support reading .gitmodules even when it's not checked out
Date: Tue, 14 Aug 2018 10:22:58 -0700 [thread overview]
Message-ID: <20180814172258.GB233973@google.com> (raw)
In-Reply-To: <20180814110525.17801-8-ao2@ao2.it>
On 08/14, Antonio Ospite wrote:
> When the .gitmodules file is not available in the working tree, try
> using HEAD:.gitmodules from the current branch. This covers the case
> when the file is part of the repository but for some reason it is not
> checked out, for example because of a sparse checkout.
>
> This makes it possible to use at least the 'git submodule' commands
> which *read* the gitmodules configuration file without fully populating
> the working tree.
>
> Writing to .gitmodules will still require that the file is checked out,
> so check for that before calling config_set_in_gitmodules_file_gently.
>
> Add a similar check also in git-submodule.sh::cmd_add() to anticipate
> the eventual failure of the "git submodule add" command when .gitmodules
> is not safely writeable; this prevents the command from leaving the
> repository in a spurious state (e.g. the submodule repository was cloned
> but .gitmodules was not updated because
> config_set_in_gitmodules_file_gently failed).
>
> Finally, add t7416-submodule-sparse-gitmodules.sh to verify that reading
> from .gitmodules succeeds and that writing to it fails when the file is
> not checked out.
>
> Signed-off-by: Antonio Ospite <ao2@ao2.it>
> ---
>
> Maybe the check in config_set_in_gitmodules_file_gently and
> git-submodule.sh::cmd_add() can share some code:
>
> - add an is_gitmodules_safely_writeable() helper
> - expose a "submodule--helper config --is-safely-writeable" subcommand
>
> But for now I preferred to keep the changes with v2 to a minimum to avoid
> blocking the series.
>
> If adding a new helper is preferred I can do a v4 or send a follow-up patch.
I see how it would be nice to have the addition of a helper like this.
I think maybe at some point we'd want it but its definitely not needed
now and can easily be added at a later point (maybe we can avoid needing
it until we can convert all of the git-submodule.sh code to C!).
Great work, thanks for working on this.
>
> Thank you,
> Antonio
>
>
> builtin/submodule--helper.c | 17 ++++-
> cache.h | 1 +
> git-submodule.sh | 7 ++
> submodule-config.c | 16 ++++-
> t/t7416-submodule-sparse-gitmodules.sh | 90 ++++++++++++++++++++++++++
> 5 files changed, 128 insertions(+), 3 deletions(-)
> create mode 100755 t/t7416-submodule-sparse-gitmodules.sh
>
> diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c
> index 7481d03b63..c0370a756b 100644
> --- a/builtin/submodule--helper.c
> +++ b/builtin/submodule--helper.c
> @@ -2036,8 +2036,23 @@ static int module_config(int argc, const char **argv, const char *prefix)
> return print_config_from_gitmodules(argv[1]);
>
> /* Equivalent to ACTION_SET in builtin/config.c */
> - if (argc == 3)
> + if (argc == 3) {
> + struct object_id oid;
> +
> + /*
> + * If the .gitmodules file is not in the working tree but it
> + * is in the current branch, stop, as writing new values (and
> + * staging them) would blindly overwrite ALL the old content.
> + *
> + * This check still makes it possible to create a brand new
> + * .gitmodules when it is safe to do so: when neither
> + * GITMODULES_FILE nor GITMODULES_HEAD exist.
> + */
> + if (!file_exists(GITMODULES_FILE) && get_oid(GITMODULES_HEAD, &oid) >= 0)
> + die(_("please make sure that the .gitmodules file in the current branch is checked out"));
> +
> return config_set_in_gitmodules_file_gently(argv[1], argv[2]);
> + }
>
> die("submodule--helper config takes 1 or 2 arguments: name [value]");
> }
> diff --git a/cache.h b/cache.h
> index 8dc7134f00..900f9e09e5 100644
> --- a/cache.h
> +++ b/cache.h
> @@ -486,6 +486,7 @@ static inline enum object_type object_type(unsigned int mode)
> #define INFOATTRIBUTES_FILE "info/attributes"
> #define ATTRIBUTE_MACRO_PREFIX "[attr]"
> #define GITMODULES_FILE ".gitmodules"
> +#define GITMODULES_HEAD "HEAD:.gitmodules"
> #define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF"
> #define GIT_NOTES_DEFAULT_REF "refs/notes/commits"
> #define GIT_NOTES_DISPLAY_REF_ENVIRONMENT "GIT_NOTES_DISPLAY_REF"
> diff --git a/git-submodule.sh b/git-submodule.sh
> index ff258e2e8c..b1cb187227 100755
> --- a/git-submodule.sh
> +++ b/git-submodule.sh
> @@ -159,6 +159,13 @@ cmd_add()
> shift
> done
>
> + # For more details about this check, see
> + # builtin/submodule--helper.c::module_config()
> + if test ! -e .gitmodules && git cat-file -e HEAD:.gitmodules > /dev/null 2>&1
> + then
> + die "$(eval_gettext "please make sure that the .gitmodules file in the current branch is checked out")"
> + fi
> +
> if test -n "$reference_path"
> then
> is_absolute_path "$reference_path" ||
> diff --git a/submodule-config.c b/submodule-config.c
> index b7ef055c63..088dabb56f 100644
> --- a/submodule-config.c
> +++ b/submodule-config.c
> @@ -1,4 +1,5 @@
> #include "cache.h"
> +#include "dir.h"
> #include "repository.h"
> #include "config.h"
> #include "submodule-config.h"
> @@ -603,8 +604,19 @@ static void submodule_cache_check_init(struct repository *repo)
> static void config_from_gitmodules(config_fn_t fn, struct repository *repo, void *data)
> {
> if (repo->worktree) {
> - char *file = repo_worktree_path(repo, GITMODULES_FILE);
> - git_config_from_file(fn, file, data);
> + struct git_config_source config_source = { 0 };
> + const struct config_options opts = { 0 };
> + struct object_id oid;
> + char *file;
> +
> + file = repo_worktree_path(repo, GITMODULES_FILE);
> + if (file_exists(file))
> + config_source.file = file;
> + else if (get_oid(GITMODULES_HEAD, &oid) >= 0)
> + config_source.blob = GITMODULES_HEAD;
> +
> + config_with_options(fn, data, &config_source, &opts);
> +
> free(file);
> }
> }
> diff --git a/t/t7416-submodule-sparse-gitmodules.sh b/t/t7416-submodule-sparse-gitmodules.sh
> new file mode 100755
> index 0000000000..5341e9b012
> --- /dev/null
> +++ b/t/t7416-submodule-sparse-gitmodules.sh
> @@ -0,0 +1,90 @@
> +#!/bin/sh
> +#
> +# Copyright (C) 2018 Antonio Ospite <ao2@ao2.it>
> +#
> +
> +test_description='Test reading/writing .gitmodules when not in the working tree
> +
> +This test verifies that, when .gitmodules is in the current branch but is not
> +in the working tree reading from it still works but writing to it does not.
> +
> +The test setup uses a sparse checkout, however the same scenario can be set up
> +also by committing .gitmodules and then just removing it from the filesystem.
> +'
> +
> +. ./test-lib.sh
> +
> +test_expect_success 'sparse checkout setup which hides .gitmodules' '
> + echo file > file &&
> + git add file &&
> + test_tick &&
> + git commit -m upstream &&
> + git clone . super &&
> + git clone super submodule &&
> + git clone super new_submodule &&
> + (cd super &&
> + git submodule add ../submodule &&
> + test_tick &&
> + git commit -m submodule &&
> + cat >.git/info/sparse-checkout <<\EOF &&
> +/*
> +!/.gitmodules
> +EOF
> + git config core.sparsecheckout true &&
> + git read-tree -m -u HEAD &&
> + test_path_is_missing .gitmodules
> + )
> +'
> +
> +test_expect_success 'reading gitmodules config file when it is not checked out' '
> + (cd super &&
> + echo "../submodule" >expected &&
> + git submodule--helper config submodule.submodule.url >actual &&
> + test_cmp expected actual
> + )
> +'
> +
> +test_expect_success 'not writing gitmodules config file when it is not checked out' '
> + (cd super &&
> + test_must_fail git submodule--helper config submodule.submodule.url newurl
> + )
> +'
> +
> +test_expect_success 'initialising submodule when the gitmodules config is not checked out' '
> + (cd super &&
> + git submodule init
> + )
> +'
> +
> +test_expect_success 'showing submodule summary when the gitmodules config is not checked out' '
> + (cd super &&
> + git submodule summary
> + )
> +'
> +
> +test_expect_success 'updating submodule when the gitmodules config is not checked out' '
> + (cd submodule &&
> + echo file2 >file2 &&
> + git add file2 &&
> + git commit -m "add file2 to submodule"
> + ) &&
> + (cd super &&
> + git submodule update
> + )
> +'
> +
> +test_expect_success 'not adding submodules when the gitmodules config is not checked out' '
> + (cd super &&
> + test_must_fail git submodule add ../new_submodule
> + )
> +'
> +
> +# This test checks that the previous "git submodule add" did not leave the
> +# repository in a spurious state when it failed.
> +test_expect_success 'init submodule still works even after the previous add failed' '
> + (cd super &&
> + git submodule init
> + )
> +'
> +
> +test_done
> --
> 2.18.0
>
--
Brandon Williams
next prev parent reply other threads:[~2018-08-14 17:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-14 11:05 [PATCH v3 0/7] Make submodules work if .gitmodules is not checked out Antonio Ospite
2018-08-14 11:05 ` [PATCH v3 1/7] submodule: add a print_config_from_gitmodules() helper Antonio Ospite
2018-08-14 11:05 ` [PATCH v3 2/7] submodule: factor out a config_set_in_gitmodules_file_gently function Antonio Ospite
2018-08-14 11:05 ` [PATCH v3 3/7] t7411: be nicer to future tests and really clean things up Antonio Ospite
2018-08-14 17:06 ` Brandon Williams
2018-08-14 20:16 ` Junio C Hamano
2018-08-20 16:46 ` Antonio Ospite
2018-08-14 11:05 ` [PATCH v3 4/7] submodule--helper: add a new 'config' subcommand Antonio Ospite
2018-08-14 17:10 ` Brandon Williams
2018-08-20 16:50 ` Antonio Ospite
2018-08-14 11:05 ` [PATCH v3 5/7] submodule: use the 'submodule--helper config' command Antonio Ospite
2018-08-14 17:12 ` Brandon Williams
2018-08-14 11:05 ` [PATCH v3 6/7] t7506: clean up .gitmodules properly before setting up new scenario Antonio Ospite
2018-08-14 11:05 ` [PATCH v3 7/7] submodule: support reading .gitmodules even when it's not checked out Antonio Ospite
2018-08-14 17:22 ` Brandon Williams [this message]
2018-08-14 20:36 ` Junio C Hamano
2018-08-20 21:37 ` Antonio Ospite
2018-08-22 11:51 ` Antonio Ospite
2018-08-22 15:29 ` Junio C Hamano
2018-08-23 11:48 ` Antonio Ospite
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180814172258.GB233973@google.com \
--to=bmwill@google.com \
--cc=ao2@ao2.it \
--cc=dangra@gmail.com \
--cc=git@vger.kernel.org \
--cc=jrnieder@gmail.com \
--cc=richih.mailinglist@gmail.com \
--cc=sbeller@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).