* de-alphabetizing the documentation
@ 2018-07-06 20:04 frederik
2018-07-06 21:16 ` Jonathan Nieder
0 siblings, 1 reply; 17+ messages in thread
From: frederik @ 2018-07-06 20:04 UTC (permalink / raw)
To: git
Dear Git Developers,
I am trying to learn how to use Git but I've been put off by not
knowing where to start. I would like to start with the 'git' man page,
but it lists the Git subcommands in alphabetical order, rather than in
an order which would be useful for learners. For example, I'm not sure
how often 'git bisect' is used, but it is strange to see it listed
before 'git init' and 'git clone'.
I know that 'gittutorial' exists, and I've indeed worked through it
and some other Git tutorials. However, these are more like lists of
examples that should come at the end of a typical manual page. I don't
think they are intended as canonical references for the program
functionality. At some point I would like to use the main 'git' manual
page as my primary source of documentation. This would be easier if it
were designed to be read straight through.
I wonder if someone familiar with Git could list the commands in an
order which makes more sense for learning, for example in the order in
which they were invented by Git developers, or in the reverse order of
frequency of use by a typical Git user. This could easily be derived
from the shell history of someone who is reading this.
(cat ~/.bash_history; cut -d ";" -f 2 ~/.zsh_history) | grep '^git ' | cut -d ' ' -f 2 | sort | uniq -c | sort -nr
I would like to have this list for personal use, but once it is
created, perhaps someone could also add it to the main Git man page.
The list could be added at the top of the "GIT COMMANDS" section.
Alternatively, and I think preferably, the entries in that section
could be rearranged into this order.
Finally, perhaps the same listing and/or reordering could be done for
other important manual pages, like 'gitglossary'. Presumably
'gitglossary' should be sorted topologically, so that each term is
defined prior to any terms depending on it.
I'm not sure why alphabetical order was decided upon, but it seems
less than useful in the information age, when people can easily search
for text electronically. Maybe at some point someone decided to "clean
up" the presentation by alphabetizing the manual page. As a user who
is more concerned with substance, it is annoying to encounter such an
emphasis on the superficial, which seems unworthy of such an important
piece of software.
Thank you,
Frederick Eaton
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 20:04 de-alphabetizing the documentation frederik
@ 2018-07-06 21:16 ` Jonathan Nieder
2018-07-06 21:18 ` Jonathan Nieder
2018-07-06 21:32 ` Eric Sunshine
0 siblings, 2 replies; 17+ messages in thread
From: Jonathan Nieder @ 2018-07-06 21:16 UTC (permalink / raw)
To: Frederick Eaton; +Cc: git, Robert P. J. Day
Hi Frederick,
Frederick Eaton wrote:
> I am trying to learn how to use Git but I've been put off by not
> knowing where to start. I would like to start with the 'git' man page,
> but it lists the Git subcommands in alphabetical order, rather than in
> an order which would be useful for learners. For example, I'm not sure
> how often 'git bisect' is used, but it is strange to see it listed
> before 'git init' and 'git clone'.
[...]
> I wonder if someone familiar with Git could list the commands in an
> order which makes more sense for learning, for example in the order in
> which they were invented by Git developers,
That doesn't seem like a useful order pedagogically, but
> or in the reverse order of
> frequency of use by a typical Git user.
That does.
Currently the commands are already broken into a few categories:
High-level commands
Main porcelain commands
Ancillary commands
Interacting with others
Low-level commands
Manipulation commands
Interrogation commands
Synching repositories
Internal helper commands
While it's alphabetical within each section, overall it is not
alphabetical at all!
Alas, there are plenty of "Main porcelain commands", and I think that
is where your question comes from. It would be nicer to list just five
to start, say.
Some of the most thoughtful documentation that comes with Git is at
https://www.kernel.org/pub/software/scm/git/docs/user-manual.html.
It might be useful for inspiration.
Ideas? If you start with a proposal, we're happy to help refine it.
People in the #git channel on irc.freenode.net (wechat.freenode.net)
might also be useful for inspiration in coming up with a proposal.
Each of us have our weaknesses for this kind of work: you're telling
me you're too new to have a sense of which commands are the first a
person would need to learn (and I have no reason to doubt you), while
many on this list would have the opposite problem of taking too much
for granted and not being able to put themselves in the mind of a
newcomer. So we'll have to help each other.
tl/dr: if you come up with a proposed "first commands to learn"
category with some proposed commands to go in it, we'll be happy to
help you with the next steps.
[...]
> Finally, perhaps the same listing and/or reordering could be done for
> other important manual pages, like 'gitglossary'. Presumably
> 'gitglossary' should be sorted topologically, so that each term is
> defined prior to any terms depending on it.
Your help is welcome here as well. Probably a similar kind of
categorization, with entries ordered either alphabetically or
according to some narrative in each section, would be the easiest to
maintain over time.
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 21:16 ` Jonathan Nieder
@ 2018-07-06 21:18 ` Jonathan Nieder
2018-07-06 23:21 ` frederik
2018-07-06 21:32 ` Eric Sunshine
1 sibling, 1 reply; 17+ messages in thread
From: Jonathan Nieder @ 2018-07-06 21:18 UTC (permalink / raw)
To: Frederick Eaton; +Cc: git, Robert P. J. Day
Jonathan Nieder wrote:
> Ideas? If you start with a proposal, we're happy to help refine it.
> People in the #git channel on irc.freenode.net (wechat.freenode.net)
> might also be useful for inspiration in coming up with a proposal.
I meant to link to webchat.freenode.net. But
https://kiwiirc.com/nextclient/ may have been a better link to use
anyway.
Thanks and sorry for the noise,
Jonathan
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 21:16 ` Jonathan Nieder
2018-07-06 21:18 ` Jonathan Nieder
@ 2018-07-06 21:32 ` Eric Sunshine
1 sibling, 0 replies; 17+ messages in thread
From: Eric Sunshine @ 2018-07-06 21:32 UTC (permalink / raw)
To: Jonathan Nieder; +Cc: Frederick Eaton, git, Robert P. J. Day
On Fri, Jul 06, 2018 at 02:16:00PM -0700, Jonathan Nieder wrote:
> Frederick Eaton wrote:
> > I wonder if someone familiar with Git could list the commands in an
> > order which makes more sense for learning, for example in the order in
> > which they were invented by Git developers,
>
> Alas, there are plenty of "Main porcelain commands", and I think that
> is where your question comes from. It would be nicer to list just five
> to start, say.
"git help" makes some attempt at narrowing the list of porcelain
commands likely to be used on an everyday basis (and it categorizes
the list by general activity). Of the 21 commands listed, I use 14-16
in pretty much every development session, so "git help" might be a
good starting place for someone trying to figure out which commands to
study, or for someone wishing to help focus the documentation a bit
more for beginners.
--- >8 ---
$ git help
usage: git ...
These are common Git commands used in various situations:
start a working area (see also: git help tutorial)
clone Clone a repository into a new directory
init Create an empty Git repository or reinitialize an existing one
work on the current change (see also: git help everyday)
add Add file contents to the index
mv Move or rename a file, a directory, or a symlink
reset Reset current HEAD to the specified state
rm Remove files from the working tree and from the index
examine the history and state (see also: git help revisions)
bisect Use binary search to find the commit that introduced a bug
grep Print lines matching a pattern
log Show commit logs
show Show various types of objects
status Show the working tree status
grow, mark and tweak your common history
branch List, create, or delete branches
checkout Switch branches or restore working tree files
commit Record changes to the repository
diff Show changes between commits, commit and working tree, etc
merge Join two or more development histories together
rebase Reapply commits on top of another base tip
tag Create, list, delete or verify a tag object signed with GPG
collaborate (see also: git help workflows)
fetch Download objects and refs from another repository
pull Fetch from and integrate with another repository or a local branch
push Update remote refs along with associated objects
'git help -a' and 'git help -g' list available subcommands and some
concept guides. See 'git help <command>' or 'git help <concept>'
to read about a specific subcommand or concept.
--- >8 ---
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 21:18 ` Jonathan Nieder
@ 2018-07-06 23:21 ` frederik
2018-07-06 23:47 ` Jonathan Nieder
2018-07-07 4:25 ` de-alphabetizing the documentation Theodore Y. Ts'o
0 siblings, 2 replies; 17+ messages in thread
From: frederik @ 2018-07-06 23:21 UTC (permalink / raw)
To: Jonathan Nieder, Eric Sunshine; +Cc: git, Robert P. J. Day
Thank you Jonathan for signaling your willingness to adopt the
documentation philosophy I suggested. That's a quite valuable first
step. Unfortunately my contribution will have to be limited for the
moment to making this suggestion, as I am extraordinarily busy. I hope
it will not be too burdensome to add this item to your TODO list and
keep it there until a willing volunteer comes along.
For what it's worth, I made extensive changes to the Arch Wiki Git
article back in 2015, following an initial attempt of mine to
understand various tutorials. It was the most prominent wiki-based Git
documentation I could find at the time. The article has of course seen
numerous improvements since then.
I don't think that it's really important to find a "best" ordering for
commands or glossary terms; it's more a matter of finding someone who
is willing to take responsibility for choosing a reasonable ordering.
Presumably the head maintainer of this project could delegate the task
to a qualified volunteer, not a newbie like myself but not necessarily
someone with expert knowledge either. It's too bad that a policy of
not listing things alphabetically wasn't adopted from the beginning of
this project, but I guess that's life.
Thanks Eric for the pointer to "git help". This does indeed provide a
finer and better grouping than the man-page (but it also looks like
another candidate for de-alphabetization...!).
Many thanks,
Frederick
On Fri, Jul 06, 2018 at 02:18:28PM -0700, Jonathan Nieder wrote:
> Jonathan Nieder wrote:
>
> > Ideas? If you start with a proposal, we're happy to help refine it.
> > People in the #git channel on irc.freenode.net (wechat.freenode.net)
> > might also be useful for inspiration in coming up with a proposal.
>
> I meant to link to webchat.freenode.net. But
> https://kiwiirc.com/nextclient/ may have been a better link to use
> anyway.
>
> Thanks and sorry for the noise,
> Jonathan
>
On Fri, Jul 06, 2018 at 05:32:39PM -0400, Eric Sunshine wrote:
> On Fri, Jul 06, 2018 at 02:16:00PM -0700, Jonathan Nieder wrote:
> > Frederick Eaton wrote:
> > > I wonder if someone familiar with Git could list the commands in an
> > > order which makes more sense for learning, for example in the order in
> > > which they were invented by Git developers,
> >
> > Alas, there are plenty of "Main porcelain commands", and I think that
> > is where your question comes from. It would be nicer to list just five
> > to start, say.
>
> "git help" makes some attempt at narrowing the list of porcelain
> commands likely to be used on an everyday basis (and it categorizes
> the list by general activity). Of the 21 commands listed, I use 14-16
> in pretty much every development session, so "git help" might be a
> good starting place for someone trying to figure out which commands to
> study, or for someone wishing to help focus the documentation a bit
> more for beginners.
>
> --- >8 ---
> $ git help
> usage: git ...
>
> These are common Git commands used in various situations:
>
> start a working area (see also: git help tutorial)
> clone Clone a repository into a new directory
> init Create an empty Git repository or reinitialize an existing one
>
> work on the current change (see also: git help everyday)
> add Add file contents to the index
> mv Move or rename a file, a directory, or a symlink
> reset Reset current HEAD to the specified state
> rm Remove files from the working tree and from the index
>
> examine the history and state (see also: git help revisions)
> bisect Use binary search to find the commit that introduced a bug
> grep Print lines matching a pattern
> log Show commit logs
> show Show various types of objects
> status Show the working tree status
>
> grow, mark and tweak your common history
> branch List, create, or delete branches
> checkout Switch branches or restore working tree files
> commit Record changes to the repository
> diff Show changes between commits, commit and working tree, etc
> merge Join two or more development histories together
> rebase Reapply commits on top of another base tip
> tag Create, list, delete or verify a tag object signed with GPG
>
> collaborate (see also: git help workflows)
> fetch Download objects and refs from another repository
> pull Fetch from and integrate with another repository or a local branch
> push Update remote refs along with associated objects
>
> 'git help -a' and 'git help -g' list available subcommands and some
> concept guides. See 'git help <command>' or 'git help <concept>'
> to read about a specific subcommand or concept.
> --- >8 ---
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 23:21 ` frederik
@ 2018-07-06 23:47 ` Jonathan Nieder
2018-07-08 1:09 ` frederik
2018-07-07 4:25 ` de-alphabetizing the documentation Theodore Y. Ts'o
1 sibling, 1 reply; 17+ messages in thread
From: Jonathan Nieder @ 2018-07-06 23:47 UTC (permalink / raw)
To: Frederick Eaton; +Cc: Eric Sunshine, git, Robert P. J. Day
Hi,
Frederick Eaton wrote:
> Unfortunately my contribution will have to be limited for the
> moment to making this suggestion, as I am extraordinarily busy. I hope
> it will not be too burdensome to add this item to your TODO list and
> keep it there until a willing volunteer comes along.
No problem. If you have time to contribute later, we can wait. :)
> For what it's worth, I made extensive changes to the Arch Wiki Git
> article back in 2015, following an initial attempt of mine to
> understand various tutorials. It was the most prominent wiki-based Git
> documentation I could find at the time. The article has of course seen
> numerous improvements since then.
For reference: https://wiki.archlinux.org/index.php/git
> I don't think that it's really important to find a "best" ordering for
> commands or glossary terms; it's more a matter of finding someone who
> is willing to take responsibility for choosing a reasonable ordering.
> Presumably the head maintainer of this project could delegate the task
> to a qualified volunteer, not a newbie like myself but not necessarily
> someone with expert knowledge either.
I'd have to say, when I compare the troubles a new user and a
long-timer would run into, I conclude that the long-timers would be
more likely to produce worse documentation. It is very difficult to
remember how new users see things. The ideal skill set in fact has
nothing to do with level of Git expertise: to produce a good result, a
good technical writer would ask the right questions to gather
information from the experts and then test their documentation on
newcomers until it works well.
Based on the work you've described already having done, it sounds like
you'd be an ideal person to get this going, if you find yourself with
time for it.
> It's too bad that a policy of
> not listing things alphabetically wasn't adopted from the beginning of
> this project, but I guess that's life.
From this thread I've been convinced that for this kind of reference
document, alphabetical organization within each section is a good
organization, provided each section is small enough (as in "git help"
output).
I'm also a fan of non reference documentation that can use a narrative
ordering instead (like "git help core-tutorial", except with more
modern commands).
> Thanks Eric for the pointer to "git help". This does indeed provide a
> finer and better grouping than the man-page (but it also looks like
> another candidate for de-alphabetization...!).
Indeed, copying that organization over from "git help" to the git(1)
manpage may be a good step for any interested people overhearing this
conversation.
As a first step, how about making git(1) recommend "git help", like
this? It already recommends giteveryday(7) but the more interactive
first command might be useful for some people.
Thoughts? Improvements?
-- >8 --
Subject: git doc: recommend "git help" as a starting point
The list of subcommands described in git(1) can be overwhelming.
Encourage newcomers to run "git help" to get a shorter list of
commands as a starting point.
Based on a suggestion by Frederick Eaton.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
Documentation/git.txt | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/git.txt b/Documentation/git.txt
index dba7f0c18e..0149ce9af0 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -23,9 +23,12 @@ unusually rich command set that provides both high-level operations
and full access to internals.
See linkgit:gittutorial[7] to get started, then see
-linkgit:giteveryday[7] for a useful minimum set of
-commands. The link:user-manual.html[Git User's Manual] has a more
-in-depth introduction.
+linkgit:giteveryday[7] and run
+
+ git help
+
+for a useful minimum set of commands. The link:user-manual.html[Git
+User's Manual] has a more in-depth introduction.
After you mastered the basic concepts, you can come back to this
page to learn what commands Git offers. You can learn more about
--
2.18.0.203.gfac676dfb9
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 23:21 ` frederik
2018-07-06 23:47 ` Jonathan Nieder
@ 2018-07-07 4:25 ` Theodore Y. Ts'o
1 sibling, 0 replies; 17+ messages in thread
From: Theodore Y. Ts'o @ 2018-07-07 4:25 UTC (permalink / raw)
To: frederik; +Cc: Jonathan Nieder, Eric Sunshine, git, Robert P. J. Day
On Fri, Jul 06, 2018 at 04:21:47PM -0700, frederik@ofb.net wrote:
> I don't think that it's really important to find a "best" ordering for
> commands or glossary terms; it's more a matter of finding someone who
> is willing to take responsibility for choosing a reasonable ordering.
> Presumably the head maintainer of this project could delegate the task
> to a qualified volunteer, not a newbie like myself but not necessarily
> someone with expert knowledge either. It's too bad that a policy of
> not listing things alphabetically wasn't adopted from the beginning of
> this project, but I guess that's life.
That wasn't that portion of the man page, for better or for worse. We
can debate whethher using a non-alphabetical order would be better or
worse for everyone; personally, I think the much better pointer is at
the very beginning of the git man page, which points people at "man
gittutorial" and "man giteveryday".
It seems to me that for your stated goal, "git everyday" has a good
list of commands that people should learn, complete with a proposed
workflow.
That's probably the biggest stumbling block of finding an ideal
ordering. What's reasonable really depends on your workflow, and
there are many different workflows depending on what a particular
developer is trying to do. Consider carpentry; for some use cases, a
screwdriver is an absolutely critical tool. For others, they might
never use it, and instead almost exclusively join two pieces of woods
using mortise and tenon joint. Others might use a butt joint, plus
glue and nails. All of these different techniques can be used to make
a wooden box, and they all involve a very different set of tools.
Regards,
- Ted
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-06 23:47 ` Jonathan Nieder
@ 2018-07-08 1:09 ` frederik
2018-07-24 19:52 ` frederik
0 siblings, 1 reply; 17+ messages in thread
From: frederik @ 2018-07-08 1:09 UTC (permalink / raw)
To: Jonathan Nieder; +Cc: Eric Sunshine, git, Robert P. J. Day
Hi Jonathan,
If it's really just a matter of needing someone with a newcomer's
perspective, then I'd be happy to look over the ordering of the git
subcommands. You can run the command I provided to glean the frequency
of each subcommand from your shell history, I'll look over the output
and see if the ordering makes sense to me, and then you or someone
else can rearrange the manual page to list the subcommands in this
order. Is that a suitable plan?
Thanks,
Frederick
On Fri, Jul 06, 2018 at 04:47:15PM -0700, Jonathan Nieder wrote:
> Hi,
>
> Frederick Eaton wrote:
>
> > Unfortunately my contribution will have to be limited for the
> > moment to making this suggestion, as I am extraordinarily busy. I hope
> > it will not be too burdensome to add this item to your TODO list and
> > keep it there until a willing volunteer comes along.
>
> No problem. If you have time to contribute later, we can wait. :)
>
> > For what it's worth, I made extensive changes to the Arch Wiki Git
> > article back in 2015, following an initial attempt of mine to
> > understand various tutorials. It was the most prominent wiki-based Git
> > documentation I could find at the time. The article has of course seen
> > numerous improvements since then.
>
> For reference: https://wiki.archlinux.org/index.php/git
>
> > I don't think that it's really important to find a "best" ordering for
> > commands or glossary terms; it's more a matter of finding someone who
> > is willing to take responsibility for choosing a reasonable ordering.
> > Presumably the head maintainer of this project could delegate the task
> > to a qualified volunteer, not a newbie like myself but not necessarily
> > someone with expert knowledge either.
>
> I'd have to say, when I compare the troubles a new user and a
> long-timer would run into, I conclude that the long-timers would be
> more likely to produce worse documentation. It is very difficult to
> remember how new users see things. The ideal skill set in fact has
> nothing to do with level of Git expertise: to produce a good result, a
> good technical writer would ask the right questions to gather
> information from the experts and then test their documentation on
> newcomers until it works well.
>
> Based on the work you've described already having done, it sounds like
> you'd be an ideal person to get this going, if you find yourself with
> time for it.
>
> > It's too bad that a policy of
> > not listing things alphabetically wasn't adopted from the beginning of
> > this project, but I guess that's life.
>
> From this thread I've been convinced that for this kind of reference
> document, alphabetical organization within each section is a good
> organization, provided each section is small enough (as in "git help"
> output).
>
> I'm also a fan of non reference documentation that can use a narrative
> ordering instead (like "git help core-tutorial", except with more
> modern commands).
>
> > Thanks Eric for the pointer to "git help". This does indeed provide a
> > finer and better grouping than the man-page (but it also looks like
> > another candidate for de-alphabetization...!).
>
> Indeed, copying that organization over from "git help" to the git(1)
> manpage may be a good step for any interested people overhearing this
> conversation.
>
> As a first step, how about making git(1) recommend "git help", like
> this? It already recommends giteveryday(7) but the more interactive
> first command might be useful for some people.
>
> Thoughts? Improvements?
>
> -- >8 --
> Subject: git doc: recommend "git help" as a starting point
>
> The list of subcommands described in git(1) can be overwhelming.
> Encourage newcomers to run "git help" to get a shorter list of
> commands as a starting point.
>
> Based on a suggestion by Frederick Eaton.
>
> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
> ---
> Documentation/git.txt | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/git.txt b/Documentation/git.txt
> index dba7f0c18e..0149ce9af0 100644
> --- a/Documentation/git.txt
> +++ b/Documentation/git.txt
> @@ -23,9 +23,12 @@ unusually rich command set that provides both high-level operations
> and full access to internals.
>
> See linkgit:gittutorial[7] to get started, then see
> -linkgit:giteveryday[7] for a useful minimum set of
> -commands. The link:user-manual.html[Git User's Manual] has a more
> -in-depth introduction.
> +linkgit:giteveryday[7] and run
> +
> + git help
> +
> +for a useful minimum set of commands. The link:user-manual.html[Git
> +User's Manual] has a more in-depth introduction.
>
> After you mastered the basic concepts, you can come back to this
> page to learn what commands Git offers. You can learn more about
> --
> 2.18.0.203.gfac676dfb9
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-08 1:09 ` frederik
@ 2018-07-24 19:52 ` frederik
2018-07-24 21:11 ` Jonathan Nieder
0 siblings, 1 reply; 17+ messages in thread
From: frederik @ 2018-07-24 19:52 UTC (permalink / raw)
To: Jonathan Nieder; +Cc: Eric Sunshine, git, Robert P. J. Day
Hello Jonathan,
Thank you for replying to me earlier. I just wanted to follow up on
this thread. Did you decide not to go with my proposal?
Next week I should have time to send you a patch with the manual page
reordered... although, unless you have a special 'diff' which can
detect when text has been moved from one place to another, I'm
guessing it would take you even longer to check the validity of the
patch than it would for me to create it.
However, I'm happy to do this or whatever other small projects you
would like to delegate as far as improving readability of your
documentation. I just need to know what is likely to be accepted.
Thanks,
Frederick
On Sat, Jul 07, 2018 at 06:09:26PM -0700, frederik@ofb.net wrote:
> Hi Jonathan,
>
> If it's really just a matter of needing someone with a newcomer's
> perspective, then I'd be happy to look over the ordering of the git
> subcommands. You can run the command I provided to glean the frequency
> of each subcommand from your shell history, I'll look over the output
> and see if the ordering makes sense to me, and then you or someone
> else can rearrange the manual page to list the subcommands in this
> order. Is that a suitable plan?
>
> Thanks,
>
> Frederick
>
> On Fri, Jul 06, 2018 at 04:47:15PM -0700, Jonathan Nieder wrote:
> > Hi,
> >
> > Frederick Eaton wrote:
> >
> > > Unfortunately my contribution will have to be limited for the
> > > moment to making this suggestion, as I am extraordinarily busy. I hope
> > > it will not be too burdensome to add this item to your TODO list and
> > > keep it there until a willing volunteer comes along.
> >
> > No problem. If you have time to contribute later, we can wait. :)
> >
> > > For what it's worth, I made extensive changes to the Arch Wiki Git
> > > article back in 2015, following an initial attempt of mine to
> > > understand various tutorials. It was the most prominent wiki-based Git
> > > documentation I could find at the time. The article has of course seen
> > > numerous improvements since then.
> >
> > For reference: https://wiki.archlinux.org/index.php/git
> >
> > > I don't think that it's really important to find a "best" ordering for
> > > commands or glossary terms; it's more a matter of finding someone who
> > > is willing to take responsibility for choosing a reasonable ordering.
> > > Presumably the head maintainer of this project could delegate the task
> > > to a qualified volunteer, not a newbie like myself but not necessarily
> > > someone with expert knowledge either.
> >
> > I'd have to say, when I compare the troubles a new user and a
> > long-timer would run into, I conclude that the long-timers would be
> > more likely to produce worse documentation. It is very difficult to
> > remember how new users see things. The ideal skill set in fact has
> > nothing to do with level of Git expertise: to produce a good result, a
> > good technical writer would ask the right questions to gather
> > information from the experts and then test their documentation on
> > newcomers until it works well.
> >
> > Based on the work you've described already having done, it sounds like
> > you'd be an ideal person to get this going, if you find yourself with
> > time for it.
> >
> > > It's too bad that a policy of
> > > not listing things alphabetically wasn't adopted from the beginning of
> > > this project, but I guess that's life.
> >
> > From this thread I've been convinced that for this kind of reference
> > document, alphabetical organization within each section is a good
> > organization, provided each section is small enough (as in "git help"
> > output).
> >
> > I'm also a fan of non reference documentation that can use a narrative
> > ordering instead (like "git help core-tutorial", except with more
> > modern commands).
> >
> > > Thanks Eric for the pointer to "git help". This does indeed provide a
> > > finer and better grouping than the man-page (but it also looks like
> > > another candidate for de-alphabetization...!).
> >
> > Indeed, copying that organization over from "git help" to the git(1)
> > manpage may be a good step for any interested people overhearing this
> > conversation.
> >
> > As a first step, how about making git(1) recommend "git help", like
> > this? It already recommends giteveryday(7) but the more interactive
> > first command might be useful for some people.
> >
> > Thoughts? Improvements?
> >
> > -- >8 --
> > Subject: git doc: recommend "git help" as a starting point
> >
> > The list of subcommands described in git(1) can be overwhelming.
> > Encourage newcomers to run "git help" to get a shorter list of
> > commands as a starting point.
> >
> > Based on a suggestion by Frederick Eaton.
> >
> > Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
> > ---
> > Documentation/git.txt | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/git.txt b/Documentation/git.txt
> > index dba7f0c18e..0149ce9af0 100644
> > --- a/Documentation/git.txt
> > +++ b/Documentation/git.txt
> > @@ -23,9 +23,12 @@ unusually rich command set that provides both high-level operations
> > and full access to internals.
> >
> > See linkgit:gittutorial[7] to get started, then see
> > -linkgit:giteveryday[7] for a useful minimum set of
> > -commands. The link:user-manual.html[Git User's Manual] has a more
> > -in-depth introduction.
> > +linkgit:giteveryday[7] and run
> > +
> > + git help
> > +
> > +for a useful minimum set of commands. The link:user-manual.html[Git
> > +User's Manual] has a more in-depth introduction.
> >
> > After you mastered the basic concepts, you can come back to this
> > page to learn what commands Git offers. You can learn more about
> > --
> > 2.18.0.203.gfac676dfb9
> >
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-24 19:52 ` frederik
@ 2018-07-24 21:11 ` Jonathan Nieder
2018-08-11 2:30 ` frederik
0 siblings, 1 reply; 17+ messages in thread
From: Jonathan Nieder @ 2018-07-24 21:11 UTC (permalink / raw)
To: frederik; +Cc: Eric Sunshine, git, Robert P. J. Day
Hi,
frederik@ofb.net wrote:
> Next week I should have time to send you a patch with the manual page
> reordered...
Yay!
> although, unless you have a special 'diff' which can
> detect when text has been moved from one place to another, I'm
> guessing it would take you even longer to check the validity of the
> patch than it would for me to create it.
Fortunately we have "git diff --color-moved".
> However, I'm happy to do this or whatever other small projects you
> would like to delegate as far as improving readability of your
> documentation. I just need to know what is likely to be accepted.
Starting with this one seems fine. Maybe people on list will have
ideas for followups on top, or maybe you'll have ideas for ways others
can help you, or both. ;-)
Thanks again,
Jonathan
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-07-24 21:11 ` Jonathan Nieder
@ 2018-08-11 2:30 ` frederik
2018-08-13 18:17 ` Junio C Hamano
0 siblings, 1 reply; 17+ messages in thread
From: frederik @ 2018-08-11 2:30 UTC (permalink / raw)
To: Jonathan Nieder; +Cc: Eric Sunshine, git, Robert P. J. Day
[-- Attachment #1: Type: text/plain, Size: 2021 bytes --]
Hi Jonathan and Git developers,
I poked around today and figured out how to reorder the command
listings in the manual page, they are taken from git/command-list.txt
so I just reorder the lines in that file (after disabling sorting in
git/Documentation/cmd-list.perl).
I haven't reordered the whole list yet. I could only get one computer
friend to send me his subcommand frequencies from his shell history. I
reordered the commands partly based on that, and partly based on their
order of occurrence in the various tutorial man pages.
I'm attaching a preliminary patch (not ready to be applied) just to
make sure this is going to be OK with the maintainer (who is the
maintainer?) before I continue. I made it with "git format-patch".
It seems fairly straightforward, but please let me know if there are
any problems. By the way, the command I used to check that the new
command list contains all the original commands is as follows:
diff =(sort command-list.txt | grep -v '^#') =(git cat-file blob e1c26c1bb7e618f6f372d9a568e7cab75612d2db | grep -v '^#' | sort)
Thanks,
Frederick
On Tue, Jul 24, 2018 at 02:11:46PM -0700, Jonathan Nieder wrote:
> Hi,
>
> frederik@ofb.net wrote:
>
> > Next week I should have time to send you a patch with the manual page
> > reordered...
>
> Yay!
>
> > although, unless you have a special 'diff' which can
> > detect when text has been moved from one place to another, I'm
> > guessing it would take you even longer to check the validity of the
> > patch than it would for me to create it.
>
> Fortunately we have "git diff --color-moved".
>
> > However, I'm happy to do this or whatever other small projects you
> > would like to delegate as far as improving readability of your
> > documentation. I just need to know what is likely to be accepted.
>
> Starting with this one seems fine. Maybe people on list will have
> ideas for followups on top, or maybe you'll have ideas for ways others
> can help you, or both. ;-)
>
> Thanks again,
> Jonathan
>
[-- Attachment #2: 0001-First-test-of-command-reordering.patch --]
[-- Type: text/plain, Size: 14176 bytes --]
From 7aabe1060eabee16fac239ce49b8f9749be11adb Mon Sep 17 00:00:00 2001
From: Frederick Eaton <frederik@ofb.net>
Date: Fri, 10 Aug 2018 18:54:28 -0700
Subject: [PATCH] First test of command reordering
---
Documentation/cmd-list.perl | 2 +-
command-list.txt | 107 +++++++++++++++++++++++++-------------------
2 files changed, 61 insertions(+), 48 deletions(-)
diff --git a/Documentation/cmd-list.perl b/Documentation/cmd-list.perl
index 5aa73cfe4..62c32f58d 100755
--- a/Documentation/cmd-list.perl
+++ b/Documentation/cmd-list.perl
@@ -43,7 +43,7 @@ sub format_one {
}
my %cmds = ();
-for (sort <>) {
+for (<>) {
next if /^#/;
chomp;
diff --git a/command-list.txt b/command-list.txt
index e1c26c1bb..94a15fd42 100644
--- a/command-list.txt
+++ b/command-list.txt
@@ -43,35 +43,83 @@
# specified here, which can only have "guide" attribute and nothing
# else.
#
+# August 2018: The list has been reordered for didactic purposes,
+# basically according to approximate usefulness / frequency of use /
+# order of use. This is to make it possible for a beginner to read the
+# manual page "straight through" and see the most important commands
+# first, rather than getting them in alphabetical order. Please
+# consider this when adding new commands.
+#
### command list (do not change this line, also do not change alignment)
# command name category [category] [category]
+# From tutorial
+git-help ancillaryinterrogators complete
+git-config ancillarymanipulators complete
+git-clone mainporcelain init
+git-init mainporcelain init
git-add mainporcelain worktree
-git-am mainporcelain
+git-commit mainporcelain history
+git-diff mainporcelain history
+git-status mainporcelain info
+git-log mainporcelain info
+git-branch mainporcelain history
+git-checkout mainporcelain history
+git-merge mainporcelain history
+gitk mainporcelain
+git-pull mainporcelain remote
+git-fetch mainporcelain remote
+# From frequencies
+git-grep mainporcelain info
+git-show mainporcelain info
+git-push mainporcelain remote
+git-submodule mainporcelain
+git-reset mainporcelain worktree
+git-cherry-pick mainporcelain
+git-tag mainporcelain history
+git-clean mainporcelain
+# From tutorial NEXT STEPS
+git-format-patch mainporcelain
+git-bisect mainporcelain info
+gitworkflows guide
+giteveryday guide
+gitcvs-migration guide
+# From tutorial-2 (+ls-remote)
+git-cat-file plumbinginterrogators
+git-ls-tree plumbinginterrogators
+git-ls-files plumbinginterrogators
+git-ls-remote plumbinginterrogators
+gitcore-tutorial guide
+gitglossary guide
+# From gitcore-tutorial
+git-update-index plumbingmanipulators
+git-diff-files plumbinginterrogators
+git-write-tree plumbingmanipulators
+git-read-tree plumbingmanipulators
+git-checkout-index plumbingmanipulators
+git-show-branch ancillaryinterrogators complete
+git-name-rev plumbinginterrogators
+git-merge-index plumbingmanipulators
+git-repack ancillarymanipulators complete
+git-prune-packed plumbingmanipulators
+git-update-server-info synchingrepositories
+git-prune ancillarymanipulators
+git-cherry ancillaryinterrogators complete
+# Remaining unsorted (alphabetized) commands
git-annotate ancillaryinterrogators
git-apply plumbingmanipulators complete
git-archimport foreignscminterface
git-archive mainporcelain
-git-bisect mainporcelain info
git-blame ancillaryinterrogators complete
-git-branch mainporcelain history
+git-am mainporcelain
git-bundle mainporcelain
-git-cat-file plumbinginterrogators
git-check-attr purehelpers
git-check-ignore purehelpers
git-check-mailmap purehelpers
-git-checkout mainporcelain history
-git-checkout-index plumbingmanipulators
git-check-ref-format purehelpers
-git-cherry ancillaryinterrogators complete
-git-cherry-pick mainporcelain
git-citool mainporcelain
-git-clean mainporcelain
-git-clone mainporcelain init
git-column purehelpers
-git-commit mainporcelain history
git-commit-graph plumbingmanipulators
git-commit-tree plumbingmanipulators
-git-config ancillarymanipulators complete
git-count-objects ancillaryinterrogators
git-credential purehelpers
git-credential-cache purehelpers
@@ -81,52 +129,37 @@ git-cvsimport foreignscminterface
git-cvsserver foreignscminterface
git-daemon synchingrepositories
git-describe mainporcelain
-git-diff mainporcelain history
-git-diff-files plumbinginterrogators
git-diff-index plumbinginterrogators
git-diff-tree plumbinginterrogators
git-difftool ancillaryinterrogators complete
git-fast-export ancillarymanipulators
git-fast-import ancillarymanipulators
-git-fetch mainporcelain remote
git-fetch-pack synchingrepositories
git-filter-branch ancillarymanipulators
git-fmt-merge-msg purehelpers
git-for-each-ref plumbinginterrogators
-git-format-patch mainporcelain
git-fsck ancillaryinterrogators complete
git-gc mainporcelain
git-get-tar-commit-id ancillaryinterrogators
-git-grep mainporcelain info
git-gui mainporcelain
git-hash-object plumbingmanipulators
-git-help ancillaryinterrogators complete
git-http-backend synchingrepositories
git-http-fetch synchelpers
git-http-push synchelpers
git-imap-send foreignscminterface
git-index-pack plumbingmanipulators
-git-init mainporcelain init
git-instaweb ancillaryinterrogators complete
git-interpret-trailers purehelpers
-gitk mainporcelain
-git-log mainporcelain info
-git-ls-files plumbinginterrogators
-git-ls-remote plumbinginterrogators
-git-ls-tree plumbinginterrogators
git-mailinfo purehelpers
git-mailsplit purehelpers
-git-merge mainporcelain history
git-merge-base plumbinginterrogators
git-merge-file plumbingmanipulators
-git-merge-index plumbingmanipulators
git-merge-one-file purehelpers
git-mergetool ancillarymanipulators complete
git-merge-tree ancillaryinterrogators
git-mktag plumbingmanipulators
git-mktree plumbingmanipulators
git-mv mainporcelain worktree
-git-name-rev plumbinginterrogators
git-notes mainporcelain
git-p4 foreignscminterface
git-pack-objects plumbingmanipulators
@@ -134,21 +167,14 @@ git-pack-redundant plumbinginterrogators
git-pack-refs ancillarymanipulators
git-parse-remote synchelpers
git-patch-id purehelpers
-git-prune ancillarymanipulators
-git-prune-packed plumbingmanipulators
-git-pull mainporcelain remote
-git-push mainporcelain remote
git-quiltimport foreignscminterface
-git-read-tree plumbingmanipulators
git-rebase mainporcelain history
git-receive-pack synchelpers
git-reflog ancillarymanipulators complete
git-remote ancillarymanipulators complete
-git-repack ancillarymanipulators complete
git-replace ancillarymanipulators complete
git-request-pull foreignscminterface complete
git-rerere ancillaryinterrogators
-git-reset mainporcelain worktree
git-revert mainporcelain
git-rev-list plumbinginterrogators
git-rev-parse ancillaryinterrogators
@@ -157,25 +183,18 @@ git-send-email foreignscminterface complete
git-send-pack synchingrepositories
git-shell synchelpers
git-shortlog mainporcelain
-git-show mainporcelain info
-git-show-branch ancillaryinterrogators complete
git-show-index plumbinginterrogators
git-show-ref plumbinginterrogators
git-sh-i18n purehelpers
git-sh-setup purehelpers
git-stash mainporcelain
git-stage complete
-git-status mainporcelain info
git-stripspace purehelpers
-git-submodule mainporcelain
git-svn foreignscminterface
git-symbolic-ref plumbingmanipulators
-git-tag mainporcelain history
git-unpack-file plumbinginterrogators
git-unpack-objects plumbingmanipulators
-git-update-index plumbingmanipulators
git-update-ref plumbingmanipulators
-git-update-server-info synchingrepositories
git-upload-archive synchelpers
git-upload-pack synchelpers
git-var plumbinginterrogators
@@ -185,14 +204,9 @@ git-verify-tag ancillaryinterrogators
gitweb ancillaryinterrogators
git-whatchanged ancillaryinterrogators complete
git-worktree mainporcelain
-git-write-tree plumbingmanipulators
gitattributes guide
gitcli guide
-gitcore-tutorial guide
-gitcvs-migration guide
gitdiffcore guide
-giteveryday guide
-gitglossary guide
githooks guide
gitignore guide
gitmodules guide
@@ -201,4 +215,3 @@ gitrepository-layout guide
gitrevisions guide
gittutorial-2 guide
gittutorial guide
-gitworkflows guide
--
2.13.1
[-- Attachment #3: new-git.1.out --]
[-- Type: text/plain, Size: 46751 bytes --]
GIT(1) Git Manual GIT(1)
NAME
git - the stupid content tracker
SYNOPSIS
git [--version] [--help] [-C <path>] [-c <name>=<value>]
[--exec-path[=<path>]] [--html-path] [--man-path] [--info-path]
[-p|--paginate|-P|--no-pager] [--no-replace-objects] [--bare]
[--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>]
[--super-prefix=<path>]
<command> [<args>]
DESCRIPTION
Git is a fast, scalable, distributed revision control system with an
unusually rich command set that provides both high-level operations and
full access to internals.
See gittutorial(7) to get started, then see giteveryday(7) for a useful
minimum set of commands. The Git User's Manual[1] has a more in-depth
introduction.
After you mastered the basic concepts, you can come back to this page
to learn what commands Git offers. You can learn more about individual
Git commands with "git help command". gitcli(7) manual page gives you
an overview of the command-line command syntax.
A formatted and hyperlinked copy of the latest Git documentation can be
viewed at https://git.github.io/htmldocs/git.html.
OPTIONS
--version
Prints the Git suite version that the git program came from.
--help
Prints the synopsis and a list of the most commonly used commands.
If the option --all or -a is given then all available commands are
printed. If a Git command is named this option will bring up the
manual page for that command.
Other options are available to control how the manual page is
displayed. See git-help(1) for more information, because git --help
... is converted internally into git help ....
-C <path>
Run as if git was started in <path> instead of the current working
directory. When multiple -C options are given, each subsequent
non-absolute -C <path> is interpreted relative to the preceding -C
<path>.
This option affects options that expect path name like --git-dir
and --work-tree in that their interpretations of the path names
would be made relative to the working directory caused by the -C
option. For example the following invocations are equivalent:
git --git-dir=a.git --work-tree=b -C c status
git --git-dir=c/a.git --work-tree=c/b status
-c <name>=<value>
Pass a configuration parameter to the command. The value given will
override values from configuration files. The <name> is expected in
the same format as listed by git config (subkeys separated by
dots).
Note that omitting the = in git -c foo.bar ... is allowed and sets
foo.bar to the boolean true value (just like [foo]bar would in a
config file). Including the equals but with an empty value (like
git -c foo.bar= ...) sets foo.bar to the empty string which git
config --bool will convert to false.
--exec-path[=<path>]
Path to wherever your core Git programs are installed. This can
also be controlled by setting the GIT_EXEC_PATH environment
variable. If no path is given, git will print the current setting
and then exit.
--html-path
Print the path, without trailing slash, where Git's HTML
documentation is installed and exit.
--man-path
Print the manpath (see man(1)) for the man pages for this version
of Git and exit.
--info-path
Print the path where the Info files documenting this version of Git
are installed and exit.
-p, --paginate
Pipe all output into less (or if set, $PAGER) if standard output is
a terminal. This overrides the pager.<cmd> configuration options
(see the "Configuration Mechanism" section below).
-P, --no-pager
Do not pipe Git output into a pager.
--git-dir=<path>
Set the path to the repository. This can also be controlled by
setting the GIT_DIR environment variable. It can be an absolute
path or relative path to current working directory.
--work-tree=<path>
Set the path to the working tree. It can be an absolute path or a
path relative to the current working directory. This can also be
controlled by setting the GIT_WORK_TREE environment variable and
the core.worktree configuration variable (see core.worktree in git-
config(1) for a more detailed discussion).
--namespace=<path>
Set the Git namespace. See gitnamespaces(7) for more details.
Equivalent to setting the GIT_NAMESPACE environment variable.
--super-prefix=<path>
Currently for internal use only. Set a prefix which gives a path
from above a repository down to its root. One use is to give
submodules context about the superproject that invoked it.
--bare
Treat the repository as a bare repository. If GIT_DIR environment
is not set, it is set to the current working directory.
--no-replace-objects
Do not use replacement refs to replace Git objects. See git-
replace(1) for more information.
--literal-pathspecs
Treat pathspecs literally (i.e. no globbing, no pathspec magic).
This is equivalent to setting the GIT_LITERAL_PATHSPECS environment
variable to 1.
--glob-pathspecs
Add "glob" magic to all pathspec. This is equivalent to setting the
GIT_GLOB_PATHSPECS environment variable to 1. Disabling globbing on
individual pathspecs can be done using pathspec magic ":(literal)"
--noglob-pathspecs
Add "literal" magic to all pathspec. This is equivalent to setting
the GIT_NOGLOB_PATHSPECS environment variable to 1. Enabling
globbing on individual pathspecs can be done using pathspec magic
":(glob)"
--icase-pathspecs
Add "icase" magic to all pathspec. This is equivalent to setting
the GIT_ICASE_PATHSPECS environment variable to 1.
--no-optional-locks
Do not perform optional operations that require locks. This is
equivalent to setting the GIT_OPTIONAL_LOCKS to 0.
--list-cmds=group[,group...]
List commands by group. This is an internal/experimental option and
may change or be removed in the future. Supported groups are:
builtins, parseopt (builtin commands that use parse-options), main
(all commands in libexec directory), others (all other commands in
$PATH that have git- prefix), list-<category> (see categories in
command-list.txt), nohelpers (exclude helper commands), alias and
config (retrieve command list from config variable
completion.commands)
GIT COMMANDS
We divide Git into high level ("porcelain") commands and low level
("plumbing") commands.
HIGH-LEVEL COMMANDS (PORCELAIN)
We separate the porcelain commands into the main commands and some
ancillary user utilities.
Main porcelain commands
git-clone(1)
Clone a repository into a new directory.
git-init(1)
Create an empty Git repository or reinitialize an existing one.
git-add(1)
Add file contents to the index.
git-commit(1)
Record changes to the repository.
git-diff(1)
Show changes between commits, commit and working tree, etc.
git-status(1)
Show the working tree status.
git-log(1)
Show commit logs.
git-branch(1)
List, create, or delete branches.
git-checkout(1)
Switch branches or restore working tree files.
git-merge(1)
Join two or more development histories together.
gitk(1)
The Git repository browser.
git-pull(1)
Fetch from and integrate with another repository or a local branch.
git-fetch(1)
Download objects and refs from another repository.
git-grep(1)
Print lines matching a pattern.
git-show(1)
Show various types of objects.
git-push(1)
Update remote refs along with associated objects.
git-submodule(1)
Initialize, update or inspect submodules.
git-reset(1)
Reset current HEAD to the specified state.
git-cherry-pick(1)
Apply the changes introduced by some existing commits.
git-tag(1)
Create, list, delete or verify a tag object signed with GPG.
git-clean(1)
Remove untracked files from the working tree.
git-format-patch(1)
Prepare patches for e-mail submission.
git-bisect(1)
Use binary search to find the commit that introduced a bug.
git-archive(1)
Create an archive of files from a named tree.
git-am(1)
Apply a series of patches from a mailbox.
git-bundle(1)
Move objects and refs by archive.
git-citool(1)
Graphical alternative to git-commit.
git-describe(1)
Give an object a human readable name based on an available ref.
git-gc(1)
Cleanup unnecessary files and optimize the local repository.
git-gui(1)
A portable graphical interface to Git.
git-mv(1)
Move or rename a file, a directory, or a symlink.
git-notes(1)
Add or inspect object notes.
git-rebase(1)
Reapply commits on top of another base tip.
git-revert(1)
Revert some existing commits.
git-rm(1)
Remove files from the working tree and from the index.
git-shortlog(1)
Summarize git log output.
git-stash(1)
Stash the changes in a dirty working directory away.
git-worktree(1)
Manage multiple working trees.
Ancillary Commands
Manipulators:
git-config(1)
Get and set repository or global options.
git-repack(1)
Pack unpacked objects in a repository.
git-prune(1)
Prune all unreachable objects from the object database.
git-fast-export(1)
Git data exporter.
git-fast-import(1)
Backend for fast Git data importers.
git-filter-branch(1)
Rewrite branches.
git-mergetool(1)
Run merge conflict resolution tools to resolve merge conflicts.
git-pack-refs(1)
Pack heads and tags for efficient repository access.
git-reflog(1)
Manage reflog information.
git-remote(1)
Manage set of tracked repositories.
git-replace(1)
Create, list, delete refs to replace objects.
Interrogators:
git-help(1)
Display help information about Git.
git-show-branch(1)
Show branches and their commits.
git-cherry(1)
Find commits yet to be applied to upstream.
git-annotate(1)
Annotate file lines with commit information.
git-blame(1)
Show what revision and author last modified each line of a file.
git-count-objects(1)
Count unpacked number of objects and their disk consumption.
git-difftool(1)
Show changes using common diff tools.
git-fsck(1)
Verifies the connectivity and validity of the objects in the
database.
git-get-tar-commit-id(1)
Extract commit ID from an archive created using git-archive.
git-instaweb(1)
Instantly browse your working repository in gitweb.
git-merge-tree(1)
Show three-way merge without touching index.
git-rerere(1)
Reuse recorded resolution of conflicted merges.
git-rev-parse(1)
Pick out and massage parameters.
git-verify-commit(1)
Check the GPG signature of commits.
git-verify-tag(1)
Check the GPG signature of tags.
gitweb(1)
Git web interface (web frontend to Git repositories).
git-whatchanged(1)
Show logs with difference each commit introduces.
Interacting with Others
These commands are to interact with foreign SCM and with other people
via patch over e-mail.
git-archimport(1)
Import an Arch repository into Git.
git-cvsexportcommit(1)
Export a single commit to a CVS checkout.
git-cvsimport(1)
Salvage your data out of another SCM people love to hate.
git-cvsserver(1)
A CVS server emulator for Git.
git-imap-send(1)
Send a collection of patches from stdin to an IMAP folder.
git-p4(1)
Import from and submit to Perforce repositories.
git-quiltimport(1)
Applies a quilt patchset onto the current branch.
git-request-pull(1)
Generates a summary of pending changes.
git-send-email(1)
Send a collection of patches as emails.
git-svn(1)
Bidirectional operation between a Subversion repository and Git.
LOW-LEVEL COMMANDS (PLUMBING)
Although Git includes its own porcelain layer, its low-level commands
are sufficient to support development of alternative porcelains.
Developers of such porcelains might start by reading about git-update-
index(1) and git-read-tree(1).
The interface (input, output, set of options and the semantics) to
these low-level commands are meant to be a lot more stable than
Porcelain level commands, because these commands are primarily for
scripted use. The interface to Porcelain commands on the other hand are
subject to change in order to improve the end user experience.
The following description divides the low-level commands into commands
that manipulate objects (in the repository, index, and working tree),
commands that interrogate and compare objects, and commands that move
objects and references between repositories.
Manipulation commands
git-update-index(1)
Register file contents in the working tree to the index.
git-write-tree(1)
Create a tree object from the current index.
git-read-tree(1)
Reads tree information into the index.
git-checkout-index(1)
Copy files from the index to the working tree.
git-merge-index(1)
Run a merge for files needing merging.
git-prune-packed(1)
Remove extra objects that are already in pack files.
git-apply(1)
Apply a patch to files and/or to the index.
git-commit-graph(1)
Write and verify Git commit graph files.
git-commit-tree(1)
Create a new commit object.
git-hash-object(1)
Compute object ID and optionally creates a blob from a file.
git-index-pack(1)
Build pack index file for an existing packed archive.
git-merge-file(1)
Run a three-way file merge.
git-mktag(1)
Creates a tag object.
git-mktree(1)
Build a tree-object from ls-tree formatted text.
git-pack-objects(1)
Create a packed archive of objects.
git-symbolic-ref(1)
Read, modify and delete symbolic refs.
git-unpack-objects(1)
Unpack objects from a packed archive.
git-update-ref(1)
Update the object name stored in a ref safely.
Interrogation commands
git-cat-file(1)
Provide content or type and size information for repository
objects.
git-ls-tree(1)
List the contents of a tree object.
git-ls-files(1)
Show information about files in the index and the working tree.
git-ls-remote(1)
List references in a remote repository.
git-diff-files(1)
Compares files in the working tree and the index.
git-name-rev(1)
Find symbolic names for given revs.
git-diff-index(1)
Compare a tree to the working tree or index.
git-diff-tree(1)
Compares the content and mode of blobs found via two tree objects.
git-for-each-ref(1)
Output information on each ref.
git-merge-base(1)
Find as good common ancestors as possible for a merge.
git-pack-redundant(1)
Find redundant pack files.
git-rev-list(1)
Lists commit objects in reverse chronological order.
git-show-index(1)
Show packed archive index.
git-show-ref(1)
List references in a local repository.
git-unpack-file(1)
Creates a temporary file with a blob's contents.
git-var(1)
Show a Git logical variable.
git-verify-pack(1)
Validate packed Git archive files.
In general, the interrogate commands do not touch the files in the
working tree.
Synching repositories
git-update-server-info(1)
Update auxiliary info file to help dumb servers.
git-daemon(1)
A really simple server for Git repositories.
git-fetch-pack(1)
Receive missing objects from another repository.
git-http-backend(1)
Server side implementation of Git over HTTP.
git-send-pack(1)
Push objects over Git protocol to another repository.
The following are helper commands used by the above; end users
typically do not use them directly.
git-http-fetch(1)
Download from a remote Git repository via HTTP.
git-http-push(1)
Push objects over HTTP/DAV to another repository.
git-parse-remote(1)
Routines to help parsing remote repository access parameters.
git-receive-pack(1)
Receive what is pushed into the repository.
git-shell(1)
Restricted login shell for Git-only SSH access.
git-upload-archive(1)
Send archive back to git-archive.
git-upload-pack(1)
Send objects packed back to git-fetch-pack.
Internal helper commands
These are internal helper commands used by other commands; end users
typically do not use them directly.
git-check-attr(1)
Display gitattributes information.
git-check-ignore(1)
Debug gitignore / exclude files.
git-check-mailmap(1)
Show canonical names and email addresses of contacts.
git-check-ref-format(1)
Ensures that a reference name is well formed.
git-column(1)
Display data in columns.
git-credential(1)
Retrieve and store user credentials.
git-credential-cache(1)
Helper to temporarily store passwords in memory.
git-credential-store(1)
Helper to store credentials on disk.
git-fmt-merge-msg(1)
Produce a merge commit message.
git-interpret-trailers(1)
add or parse structured information in commit messages.
git-mailinfo(1)
Extracts patch and authorship from a single e-mail message.
git-mailsplit(1)
Simple UNIX mbox splitter program.
git-merge-one-file(1)
The standard helper program to use with git-merge-index.
git-patch-id(1)
Compute unique ID for a patch.
git-sh-i18n(1)
Git's i18n setup code for shell scripts.
git-sh-setup(1)
Common Git shell script setup code.
git-stripspace(1)
Remove unnecessary whitespace.
CONFIGURATION MECHANISM
Git uses a simple text format to store customizations that are per
repository and are per user. Such a configuration file may look like
this:
#
# A '#' or ';' character indicates a comment.
#
; core variables
[core]
; Don't trust file modes
filemode = false
; user identity
[user]
name = "Junio C Hamano"
email = "gitster@pobox.com"
Various commands read from the configuration file and adjust their
operation accordingly. See git-config(1) for a list and more details
about the configuration mechanism.
IDENTIFIER TERMINOLOGY
<object>
Indicates the object name for any type of object.
<blob>
Indicates a blob object name.
<tree>
Indicates a tree object name.
<commit>
Indicates a commit object name.
<tree-ish>
Indicates a tree, commit or tag object name. A command that takes a
<tree-ish> argument ultimately wants to operate on a <tree> object
but automatically dereferences <commit> and <tag> objects that
point at a <tree>.
<commit-ish>
Indicates a commit or tag object name. A command that takes a
<commit-ish> argument ultimately wants to operate on a <commit>
object but automatically dereferences <tag> objects that point at a
<commit>.
<type>
Indicates that an object type is required. Currently one of: blob,
tree, commit, or tag.
<file>
Indicates a filename - almost always relative to the root of the
tree structure GIT_INDEX_FILE describes.
SYMBOLIC IDENTIFIERS
Any Git command accepting any <object> can also use the following
symbolic notation:
HEAD
indicates the head of the current branch.
<tag>
a valid tag name (i.e. a refs/tags/<tag> reference).
<head>
a valid head name (i.e. a refs/heads/<head> reference).
For a more complete list of ways to spell object names, see "SPECIFYING
REVISIONS" section in gitrevisions(7).
FILE/DIRECTORY STRUCTURE
Please see the gitrepository-layout(5) document.
Read githooks(5) for more details about each hook.
Higher level SCMs may provide and manage additional information in the
$GIT_DIR.
TERMINOLOGY
Please see gitglossary(7).
ENVIRONMENT VARIABLES
Various Git commands use the following environment variables:
The Git Repository
These environment variables apply to all core Git commands. Nb: it is
worth noting that they may be used/overridden by SCMS sitting above Git
so take care if using a foreign front-end.
GIT_INDEX_FILE
This environment allows the specification of an alternate index
file. If not specified, the default of $GIT_DIR/index is used.
GIT_INDEX_VERSION
This environment variable allows the specification of an index
version for new repositories. It won't affect existing index files.
By default index file version 2 or 3 is used. See git-update-
index(1) for more information.
GIT_OBJECT_DIRECTORY
If the object storage directory is specified via this environment
variable then the sha1 directories are created underneath -
otherwise the default $GIT_DIR/objects directory is used.
GIT_ALTERNATE_OBJECT_DIRECTORIES
Due to the immutable nature of Git objects, old objects can be
archived into shared, read-only directories. This variable
specifies a ":" separated (on Windows ";" separated) list of Git
object directories which can be used to search for Git objects. New
objects will not be written to these directories.
Entries that begin with `"` (double-quote) will be interpreted
as C-style quoted paths, removing leading and trailing
double-quotes and respecting backslash escapes. E.g., the value
`"path-with-\"-and-:-in-it":vanilla-path` has two paths:
`path-with-"-and-:-in-it` and `vanilla-path`.
GIT_DIR
If the GIT_DIR environment variable is set then it specifies a path
to use instead of the default .git for the base of the repository.
The --git-dir command-line option also sets this value.
GIT_WORK_TREE
Set the path to the root of the working tree. This can also be
controlled by the --work-tree command-line option and the
core.worktree configuration variable.
GIT_NAMESPACE
Set the Git namespace; see gitnamespaces(7) for details. The
--namespace command-line option also sets this value.
GIT_CEILING_DIRECTORIES
This should be a colon-separated list of absolute paths. If set, it
is a list of directories that Git should not chdir up into while
looking for a repository directory (useful for excluding
slow-loading network directories). It will not exclude the current
working directory or a GIT_DIR set on the command line or in the
environment. Normally, Git has to read the entries in this list and
resolve any symlink that might be present in order to compare them
with the current directory. However, if even this access is slow,
you can add an empty entry to the list to tell Git that the
subsequent entries are not symlinks and needn't be resolved; e.g.,
GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink.
GIT_DISCOVERY_ACROSS_FILESYSTEM
When run in a directory that does not have ".git" repository
directory, Git tries to find such a directory in the parent
directories to find the top of the working tree, but by default it
does not cross filesystem boundaries. This environment variable can
be set to true to tell Git not to stop at filesystem boundaries.
Like GIT_CEILING_DIRECTORIES, this will not affect an explicit
repository directory set via GIT_DIR or on the command line.
GIT_COMMON_DIR
If this variable is set to a path, non-worktree files that are
normally in $GIT_DIR will be taken from this path instead.
Worktree-specific files such as HEAD or index are taken from
$GIT_DIR. See gitrepository-layout(5) and git-worktree(1) for
details. This variable has lower precedence than other path
variables such as GIT_INDEX_FILE, GIT_OBJECT_DIRECTORY...
Git Commits
GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME,
GIT_COMMITTER_EMAIL, GIT_COMMITTER_DATE, EMAIL
see git-commit-tree(1)
Git Diffs
GIT_DIFF_OPTS
Only valid setting is "--unified=??" or "-u??" to set the number of
context lines shown when a unified diff is created. This takes
precedence over any "-U" or "--unified" option value passed on the
Git diff command line.
GIT_EXTERNAL_DIFF
When the environment variable GIT_EXTERNAL_DIFF is set, the program
named by it is called, instead of the diff invocation described
above. For a path that is added, removed, or modified,
GIT_EXTERNAL_DIFF is called with 7 parameters:
path old-file old-hex old-mode new-file new-hex new-mode
where:
<old|new>-file
are files GIT_EXTERNAL_DIFF can use to read the contents of
<old|new>,
<old|new>-hex
are the 40-hexdigit SHA-1 hashes,
<old|new>-mode
are the octal representation of the file modes.
The file parameters can point at the user's working file (e.g.
new-file in "git-diff-files"), /dev/null (e.g. old-file when a new
file is added), or a temporary file (e.g. old-file in the index).
GIT_EXTERNAL_DIFF should not worry about unlinking the temporary
file --- it is removed when GIT_EXTERNAL_DIFF exits.
For a path that is unmerged, GIT_EXTERNAL_DIFF is called with 1
parameter, <path>.
For each path GIT_EXTERNAL_DIFF is called, two environment
variables, GIT_DIFF_PATH_COUNTER and GIT_DIFF_PATH_TOTAL are set.
GIT_DIFF_PATH_COUNTER
A 1-based counter incremented by one for every path.
GIT_DIFF_PATH_TOTAL
The total number of paths.
other
GIT_MERGE_VERBOSITY
A number controlling the amount of output shown by the recursive
merge strategy. Overrides merge.verbosity. See git-merge(1)
GIT_PAGER
This environment variable overrides $PAGER. If it is set to an
empty string or to the value "cat", Git will not launch a pager.
See also the core.pager option in git-config(1).
GIT_EDITOR
This environment variable overrides $EDITOR and $VISUAL. It is used
by several Git commands when, on interactive mode, an editor is to
be launched. See also git-var(1) and the core.editor option in git-
config(1).
GIT_SSH, GIT_SSH_COMMAND
If either of these environment variables is set then git fetch and
git push will use the specified command instead of ssh when they
need to connect to a remote system. The command-line parameters
passed to the configured command are determined by the ssh variant.
See ssh.variant option in git-config(1) for details.
+ $GIT_SSH_COMMAND takes precedence over $GIT_SSH, and is interpreted
by the shell, which allows additional arguments to be included.
$GIT_SSH on the other hand must be just the path to a program (which
can be a wrapper shell script, if additional arguments are needed).
+ Usually it is easier to configure any desired options through your
personal .ssh/config file. Please consult your ssh documentation for
further details.
GIT_SSH_VARIANT
If this environment variable is set, it overrides Git's
autodetection whether GIT_SSH/GIT_SSH_COMMAND/core.sshCommand refer
to OpenSSH, plink or tortoiseplink. This variable overrides the
config setting ssh.variant that serves the same purpose.
GIT_ASKPASS
If this environment variable is set, then Git commands which need
to acquire passwords or passphrases (e.g. for HTTP or IMAP
authentication) will call this program with a suitable prompt as
command-line argument and read the password from its STDOUT. See
also the core.askPass option in git-config(1).
GIT_TERMINAL_PROMPT
If this environment variable is set to 0, git will not prompt on
the terminal (e.g., when asking for HTTP authentication).
GIT_CONFIG_NOSYSTEM
Whether to skip reading settings from the system-wide
$(prefix)/etc/gitconfig file. This environment variable can be used
along with $HOME and $XDG_CONFIG_HOME to create a predictable
environment for a picky script, or you can set it temporarily to
avoid using a buggy /etc/gitconfig file while waiting for someone
with sufficient permissions to fix it.
GIT_FLUSH
If this environment variable is set to "1", then commands such as
git blame (in incremental mode), git rev-list, git log, git
check-attr and git check-ignore will force a flush of the output
stream after each record have been flushed. If this variable is set
to "0", the output of these commands will be done using completely
buffered I/O. If this environment variable is not set, Git will
choose buffered or record-oriented flushing based on whether stdout
appears to be redirected to a file or not.
GIT_TRACE
Enables general trace messages, e.g. alias expansion, built-in
command execution and external command execution.
If this variable is set to "1", "2" or "true" (comparison is case
insensitive), trace messages will be printed to stderr.
If the variable is set to an integer value greater than 2 and lower
than 10 (strictly) then Git will interpret this value as an open
file descriptor and will try to write the trace messages into this
file descriptor.
Alternatively, if the variable is set to an absolute path (starting
with a / character), Git will interpret this as a file path and
will try to write the trace messages into it.
Unsetting the variable, or setting it to empty, "0" or "false"
(case insensitive) disables trace messages.
GIT_TRACE_FSMONITOR
Enables trace messages for the filesystem monitor extension. See
GIT_TRACE for available trace output options.
GIT_TRACE_PACK_ACCESS
Enables trace messages for all accesses to any packs. For each
access, the pack file name and an offset in the pack is recorded.
This may be helpful for troubleshooting some pack-related
performance problems. See GIT_TRACE for available trace output
options.
GIT_TRACE_PACKET
Enables trace messages for all packets coming in or out of a given
program. This can help with debugging object negotiation or other
protocol issues. Tracing is turned off at a packet starting with
"PACK" (but see GIT_TRACE_PACKFILE below). See GIT_TRACE for
available trace output options.
GIT_TRACE_PACKFILE
Enables tracing of packfiles sent or received by a given program.
Unlike other trace output, this trace is verbatim: no headers, and
no quoting of binary data. You almost certainly want to direct into
a file (e.g., GIT_TRACE_PACKFILE=/tmp/my.pack) rather than
displaying it on the terminal or mixing it with other trace output.
Note that this is currently only implemented for the client side of
clones and fetches.
GIT_TRACE_PERFORMANCE
Enables performance related trace messages, e.g. total execution
time of each Git command. See GIT_TRACE for available trace output
options.
GIT_TRACE_SETUP
Enables trace messages printing the .git, working tree and current
working directory after Git has completed its setup phase. See
GIT_TRACE for available trace output options.
GIT_TRACE_SHALLOW
Enables trace messages that can help debugging fetching / cloning
of shallow repositories. See GIT_TRACE for available trace output
options.
GIT_TRACE_CURL
Enables a curl full trace dump of all incoming and outgoing data,
including descriptive information, of the git transport protocol.
This is similar to doing curl --trace-ascii on the command line.
This option overrides setting the GIT_CURL_VERBOSE environment
variable. See GIT_TRACE for available trace output options.
GIT_TRACE_CURL_NO_DATA
When a curl trace is enabled (see GIT_TRACE_CURL above), do not
dump data (that is, only dump info lines and headers).
GIT_REDACT_COOKIES
This can be set to a comma-separated list of strings. When a curl
trace is enabled (see GIT_TRACE_CURL above), whenever a "Cookies:"
header sent by the client is dumped, values of cookies whose key is
in that list (case-sensitive) are redacted.
GIT_LITERAL_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs
literally, rather than as glob patterns. For example, running
GIT_LITERAL_PATHSPECS=1 git log -- '*.c' will search for commits
that touch the path *.c, not any paths that the glob *.c matches.
You might want this if you are feeding literal paths to Git (e.g.,
paths previously given to you by git ls-tree, --raw diff output,
etc).
GIT_GLOB_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs as
glob patterns (aka "glob" magic).
GIT_NOGLOB_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs as
literal (aka "literal" magic).
GIT_ICASE_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs as
case-insensitive.
GIT_REFLOG_ACTION
When a ref is updated, reflog entries are created to keep track of
the reason why the ref was updated (which is typically the name of
the high-level command that updated the ref), in addition to the
old and new values of the ref. A scripted Porcelain command can use
set_reflog_action helper function in git-sh-setup to set its name
to this variable when it is invoked as the top level command by the
end user, to be recorded in the body of the reflog.
GIT_REF_PARANOIA
If set to 1, include broken or badly named refs when iterating over
lists of refs. In a normal, non-corrupted repository, this does
nothing. However, enabling it may help git to detect and abort some
operations in the presence of broken refs. Git sets this variable
automatically when performing destructive operations like git-
prune(1). You should not need to set it yourself unless you want to
be paranoid about making sure an operation has touched every ref
(e.g., because you are cloning a repository to make a backup).
GIT_ALLOW_PROTOCOL
If set to a colon-separated list of protocols, behave as if
protocol.allow is set to never, and each of the listed protocols
has protocol.<name>.allow set to always (overriding any existing
configuration). In other words, any protocol not mentioned will be
disallowed (i.e., this is a whitelist, not a blacklist). See the
description of protocol.allow in git-config(1) for more details.
GIT_PROTOCOL_FROM_USER
Set to 0 to prevent protocols used by fetch/push/clone which are
configured to the user state. This is useful to restrict recursive
submodule initialization from an untrusted repository or for
programs which feed potentially-untrusted URLS to git commands. See
git-config(1) for more details.
GIT_PROTOCOL
For internal use only. Used in handshaking the wire protocol.
Contains a colon : separated list of keys with optional values
key[=value]. Presence of unknown keys and values must be ignored.
GIT_OPTIONAL_LOCKS
If set to 0, Git will complete any requested operation without
performing any optional sub-operations that require taking a lock.
For example, this will prevent git status from refreshing the index
as a side effect. This is useful for processes running in the
background which do not want to cause lock contention with other
operations on the repository. Defaults to 1.
GIT_REDIRECT_STDIN, GIT_REDIRECT_STDOUT, GIT_REDIRECT_STDERR
Windows-only: allow redirecting the standard input/output/error
handles to paths specified by the environment variables. This is
particularly useful in multi-threaded applications where the
canonical way to pass standard handles via CreateProcess() is not
an option because it would require the handles to be marked
inheritable (and consequently every spawned process would inherit
them, possibly blocking regular Git operations). The primary
intended use case is to use named pipes for communication (e.g.
\\.\pipe\my-git-stdin-123).
Two special values are supported: off will simply close the
corresponding standard handle, and if GIT_REDIRECT_STDERR is 2>&1,
standard error will be redirected to the same handle as standard
output.
GIT_PRINT_SHA1_ELLIPSIS (deprecated)
If set to yes, print an ellipsis following an (abbreviated) SHA-1
value. This affects indications of detached HEADs (git-checkout(1))
and the raw diff output (git-diff(1)). Printing an ellipsis in the
cases mentioned is no longer considered adequate and support for it
is likely to be removed in the foreseeable future (along with the
variable).
DISCUSSION
More detail on the following is available from the Git concepts chapter
of the user-manual[2] and gitcore-tutorial(7).
A Git project normally consists of a working directory with a ".git"
subdirectory at the top level. The .git directory contains, among other
things, a compressed object database representing the complete history
of the project, an "index" file which links that history to the current
contents of the working tree, and named pointers into that history such
as tags and branch heads.
The object database contains objects of three main types: blobs, which
hold file data; trees, which point to blobs and other trees to build up
directory hierarchies; and commits, which each reference a single tree
and some number of parent commits.
The commit, equivalent to what other systems call a "changeset" or
"version", represents a step in the project's history, and each parent
represents an immediately preceding step. Commits with more than one
parent represent merges of independent lines of development.
All objects are named by the SHA-1 hash of their contents, normally
written as a string of 40 hex digits. Such names are globally unique.
The entire history leading up to a commit can be vouched for by signing
just that commit. A fourth object type, the tag, is provided for this
purpose.
When first created, objects are stored in individual files, but for
efficiency may later be compressed together into "pack files".
Named pointers called refs mark interesting points in history. A ref
may contain the SHA-1 name of an object or the name of another ref.
Refs with names beginning ref/head/ contain the SHA-1 name of the most
recent commit (or "head") of a branch under development. SHA-1 names of
tags of interest are stored under ref/tags/. A special ref named HEAD
contains the name of the currently checked-out branch.
The index file is initialized with a list of all paths and, for each
path, a blob object and a set of attributes. The blob object represents
the contents of the file as of the head of the current branch. The
attributes (last modified time, size, etc.) are taken from the
corresponding file in the working tree. Subsequent changes to the
working tree can be found by comparing these attributes. The index may
be updated with new content, and new commits may be created from the
content stored in the index.
The index is also capable of storing multiple entries (called "stages")
for a given pathname. These stages are used to hold the various
unmerged version of a file when a merge is in progress.
FURTHER DOCUMENTATION
See the references in the "description" section to get started using
Git. The following is probably more detail than necessary for a
first-time user.
The Git concepts chapter of the user-manual[2] and gitcore-tutorial(7)
both provide introductions to the underlying Git architecture.
See gitworkflows(7) for an overview of recommended workflows.
See also the howto[3] documents for some useful examples.
The internals are documented in the Git API documentation[4].
Users migrating from CVS may also want to read gitcvs-migration(7).
AUTHORS
Git was started by Linus Torvalds, and is currently maintained by Junio
C Hamano. Numerous contributions have come from the Git mailing list
<git@vger.kernel.org[5]>.
http://www.openhub.net/p/git/contributors/summary gives you a more
complete list of contributors.
If you have a clone of git.git itself, the output of git-shortlog(1)
and git-blame(1) can show you the authors for specific parts of the
project.
REPORTING BUGS
Report bugs to the Git mailing list <git@vger.kernel.org[5]> where the
development and maintenance is primarily done. You do not have to be
subscribed to the list to send a message there.
Issues which are security relevant should be disclosed privately to the
Git Security mailing list <git-security@googlegroups.com[6]>.
SEE ALSO
gittutorial(7), gittutorial-2(7), giteveryday(7), gitcvs-migration(7),
gitglossary(7), gitcore-tutorial(7), gitcli(7), The Git User's
Manual[1], gitworkflows(7)
GIT
Part of the git(1) suite
NOTES
1. Git User's Manual
file:///home/frederik/pkg-tmp/git/../gitbuild//share/doc/git-doc/user-manual.html
2. Git concepts chapter of the user-manual
file:///home/frederik/pkg-tmp/git/../gitbuild//share/doc/git-doc/user-manual.html#git-concepts
3. howto
file:///home/frederik/pkg-tmp/git/../gitbuild//share/doc/git-doc/howto-index.html
4. Git API documentation
file:///home/frederik/pkg-tmp/git/../gitbuild//share/doc/git-doc/technical/api-index.html
5. git@vger.kernel.org
mailto:git@vger.kernel.org
6. git-security@googlegroups.com
mailto:git-security@googlegroups.com
Git 2.18.0.548.g7aabe1 08/10/2018 GIT(1)
[-- Attachment #4: command-list.txt --]
[-- Type: text/plain, Size: 11695 bytes --]
# Command classification list
# ---------------------------
# All supported commands, builtin or external, must be described in
# here. This info is used to list commands in various places. Each
# command is on one line followed by one or more attributes.
#
# The first attribute group is mandatory and indicates the command
# type. This group includes:
#
# mainporcelain
# ancillarymanipulators
# ancillaryinterrogators
# foreignscminterface
# plumbingmanipulators
# plumbinginterrogators
# synchingrepositories
# synchelpers
# purehelpers
#
# The type names are self explanatory. But if you want to see what
# command belongs to what group to get a better picture, have a look
# at "git" man page, "GIT COMMANDS" section.
#
# Commands of type mainporcelain can also optionally have one of these
# attributes:
#
# init
# worktree
# info
# history
# remote
#
# These commands are considered "common" and will show up in "git
# help" output in groups. Uncommon porcelain commands must not
# specify any of these attributes.
#
# "complete" attribute is used to mark that the command should be
# completable by git-completion.bash. Note that by default,
# mainporcelain commands are completable so you don't need this
# attribute.
#
# As part of the Git man page list, the man(5/7) guides are also
# specified here, which can only have "guide" attribute and nothing
# else.
#
# August 2018: The list has been reordered for didactic purposes,
# basically according to approximate usefulness / frequency of use /
# order of use. This is to make it possible for a beginner to read the
# manual page "straight through" and see the most important commands
# first, rather than getting them in alphabetical order. Please
# consider this when adding new commands.
#
### command list (do not change this line, also do not change alignment)
# command name category [category] [category]
# From tutorial
git-help ancillaryinterrogators complete
git-config ancillarymanipulators complete
git-clone mainporcelain init
git-init mainporcelain init
git-add mainporcelain worktree
git-commit mainporcelain history
git-diff mainporcelain history
git-status mainporcelain info
git-log mainporcelain info
git-branch mainporcelain history
git-checkout mainporcelain history
git-merge mainporcelain history
gitk mainporcelain
git-pull mainporcelain remote
git-fetch mainporcelain remote
# From frequencies
git-grep mainporcelain info
git-show mainporcelain info
git-push mainporcelain remote
git-submodule mainporcelain
git-reset mainporcelain worktree
git-cherry-pick mainporcelain
git-tag mainporcelain history
git-clean mainporcelain
# From tutorial NEXT STEPS
git-format-patch mainporcelain
git-bisect mainporcelain info
gitworkflows guide
giteveryday guide
gitcvs-migration guide
# From tutorial-2 (+ls-remote)
git-cat-file plumbinginterrogators
git-ls-tree plumbinginterrogators
git-ls-files plumbinginterrogators
git-ls-remote plumbinginterrogators
gitcore-tutorial guide
gitglossary guide
# From gitcore-tutorial
git-update-index plumbingmanipulators
git-diff-files plumbinginterrogators
git-write-tree plumbingmanipulators
git-read-tree plumbingmanipulators
git-checkout-index plumbingmanipulators
git-show-branch ancillaryinterrogators complete
git-name-rev plumbinginterrogators
git-merge-index plumbingmanipulators
git-repack ancillarymanipulators complete
git-prune-packed plumbingmanipulators
git-update-server-info synchingrepositories
git-prune ancillarymanipulators
git-cherry ancillaryinterrogators complete
# Remaining unsorted (alphabetized) commands
git-annotate ancillaryinterrogators
git-apply plumbingmanipulators complete
git-archimport foreignscminterface
git-archive mainporcelain
git-blame ancillaryinterrogators complete
git-am mainporcelain
git-bundle mainporcelain
git-check-attr purehelpers
git-check-ignore purehelpers
git-check-mailmap purehelpers
git-check-ref-format purehelpers
git-citool mainporcelain
git-column purehelpers
git-commit-graph plumbingmanipulators
git-commit-tree plumbingmanipulators
git-count-objects ancillaryinterrogators
git-credential purehelpers
git-credential-cache purehelpers
git-credential-store purehelpers
git-cvsexportcommit foreignscminterface
git-cvsimport foreignscminterface
git-cvsserver foreignscminterface
git-daemon synchingrepositories
git-describe mainporcelain
git-diff-index plumbinginterrogators
git-diff-tree plumbinginterrogators
git-difftool ancillaryinterrogators complete
git-fast-export ancillarymanipulators
git-fast-import ancillarymanipulators
git-fetch-pack synchingrepositories
git-filter-branch ancillarymanipulators
git-fmt-merge-msg purehelpers
git-for-each-ref plumbinginterrogators
git-fsck ancillaryinterrogators complete
git-gc mainporcelain
git-get-tar-commit-id ancillaryinterrogators
git-gui mainporcelain
git-hash-object plumbingmanipulators
git-http-backend synchingrepositories
git-http-fetch synchelpers
git-http-push synchelpers
git-imap-send foreignscminterface
git-index-pack plumbingmanipulators
git-instaweb ancillaryinterrogators complete
git-interpret-trailers purehelpers
git-mailinfo purehelpers
git-mailsplit purehelpers
git-merge-base plumbinginterrogators
git-merge-file plumbingmanipulators
git-merge-one-file purehelpers
git-mergetool ancillarymanipulators complete
git-merge-tree ancillaryinterrogators
git-mktag plumbingmanipulators
git-mktree plumbingmanipulators
git-mv mainporcelain worktree
git-notes mainporcelain
git-p4 foreignscminterface
git-pack-objects plumbingmanipulators
git-pack-redundant plumbinginterrogators
git-pack-refs ancillarymanipulators
git-parse-remote synchelpers
git-patch-id purehelpers
git-quiltimport foreignscminterface
git-rebase mainporcelain history
git-receive-pack synchelpers
git-reflog ancillarymanipulators complete
git-remote ancillarymanipulators complete
git-replace ancillarymanipulators complete
git-request-pull foreignscminterface complete
git-rerere ancillaryinterrogators
git-revert mainporcelain
git-rev-list plumbinginterrogators
git-rev-parse ancillaryinterrogators
git-rm mainporcelain worktree
git-send-email foreignscminterface complete
git-send-pack synchingrepositories
git-shell synchelpers
git-shortlog mainporcelain
git-show-index plumbinginterrogators
git-show-ref plumbinginterrogators
git-sh-i18n purehelpers
git-sh-setup purehelpers
git-stash mainporcelain
git-stage complete
git-stripspace purehelpers
git-svn foreignscminterface
git-symbolic-ref plumbingmanipulators
git-unpack-file plumbinginterrogators
git-unpack-objects plumbingmanipulators
git-update-ref plumbingmanipulators
git-upload-archive synchelpers
git-upload-pack synchelpers
git-var plumbinginterrogators
git-verify-commit ancillaryinterrogators
git-verify-pack plumbinginterrogators
git-verify-tag ancillaryinterrogators
gitweb ancillaryinterrogators
git-whatchanged ancillaryinterrogators complete
git-worktree mainporcelain
gitattributes guide
gitcli guide
gitdiffcore guide
githooks guide
gitignore guide
gitmodules guide
gitnamespaces guide
gitrepository-layout guide
gitrevisions guide
gittutorial-2 guide
gittutorial guide
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: de-alphabetizing the documentation
2018-08-11 2:30 ` frederik
@ 2018-08-13 18:17 ` Junio C Hamano
2019-02-19 17:54 ` [PATCH 0/1] de-alphabetize command list Frederick Eaton
2019-02-19 17:54 ` [PATCH] Prioritize list of commands appearing in git(1), via command-list.txt. Don't invoke 'sort' in Documentation/cmd-list.perl Frederick Eaton
0 siblings, 2 replies; 17+ messages in thread
From: Junio C Hamano @ 2018-08-13 18:17 UTC (permalink / raw)
To: frederik; +Cc: Jonathan Nieder, Eric Sunshine, git, Robert P. J. Day
frederik@ofb.net writes:
> Hi Jonathan and Git developers,
>
> I poked around today and figured out how to reorder the command
> listings in the manual page, they are taken from git/command-list.txt
> so I just reorder the lines in that file (after disabling sorting in
> git/Documentation/cmd-list.perl).
>
> I haven't reordered the whole list yet. I could only get one computer
> friend to send me his subcommand frequencies from his shell history. I
> reordered the commands partly based on that, and partly based on their
> order of occurrence in the various tutorial man pages.
There are two good things about a list that is alphabetical. One is
that you can scan with your eyes and a finger to find what you are
looking for more quickly. The other is that it is mechanical so we
won't waste time on bickering whose frequency table is more correct,
whether frequency table is a good approach to derive a better order
(than, say, the order in which the commands appear in an every-day
workflow) to begin with.
I would say if we were departing from alphabetical order, we should
first declare that we are *not* looking for the best way to order
the list, so that people do not waste too much time bikeshedding.
Instead what we should aim for is to come up with _an_ order that is
not too unreasonable and settle as quickly as we can.
And from that point of view, what I saw in new-git.1.out, I found it
not so outrageously unreasonable ;-).
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/1] de-alphabetize command list
2018-08-13 18:17 ` Junio C Hamano
@ 2019-02-19 17:54 ` Frederick Eaton
2019-02-21 18:05 ` frederik
2019-02-19 17:54 ` [PATCH] Prioritize list of commands appearing in git(1), via command-list.txt. Don't invoke 'sort' in Documentation/cmd-list.perl Frederick Eaton
1 sibling, 1 reply; 17+ messages in thread
From: Frederick Eaton @ 2019-02-19 17:54 UTC (permalink / raw)
To: git
Cc: Junio C Hamano, Eric Sunshine, Jonathan Nieder,
Theodore Y. Ts'o, Frederick Eaton
This is a follow-up to my proposal to de-alphabetize the command
listings in the git(1) manual page, from 6 July 2018.
Some projects have manual page items listed in alphabetical order,
some don't. As I argued in my proposal, I find it easier to learn from
material which is not alphabetized. If this patch is accepted, I hope
that it will make the Git documentation more accessible to myself and
others.
I produced the reordered command list in this patch using several
sources, as indicated by comments in the new command-list.txt file.
First, all the commands in the main part of "gittutorial(7)" appear in
order, then the commands in giteveryday(7). Then appear additional
commands from a friend's shell history, in reverse order of frequency.
Then gittutorial-2(7), then gitcore-tutorial(7). After that there is a
list of "guides", followed by about 100 commands not appearing in the
earlier lists. I kept the guides and the remaining commands in their
category groupings (guide, mainporcelain, ancillarymanipulators,
etc.), but ordered the commands within each category according to my
own judgment after skimming each manual page.
To verify that the new list is a permutation of the most recent list,
I use the following command (it should produce no output and exit 0):
diff <(git show master:command-list.txt | grep -v '^#' | sort ) <(cat command-list.txt | grep -v '^#' | sort)
Note this patch changes the order of commands appearing in the
generated file "command-list.h", which mostly seems to be used by
"help.c". Probably due to the various occurrences of QSORT in
"help.c", I think this reordering has no visible effect. I am willing
to do any additional testing which may be recommended to ensure that
this patch has no undesired consequences.
Frederick Eaton (1):
Prioritize list of commands appearing in git(1), via command-list.txt.
Don't invoke 'sort' in Documentation/cmd-list.perl.
Documentation/cmd-list.perl | 2 +-
command-list.txt | 295 +++++++++++++++++++-----------------
2 files changed, 158 insertions(+), 139 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH] Prioritize list of commands appearing in git(1), via command-list.txt. Don't invoke 'sort' in Documentation/cmd-list.perl.
2018-08-13 18:17 ` Junio C Hamano
2019-02-19 17:54 ` [PATCH 0/1] de-alphabetize command list Frederick Eaton
@ 2019-02-19 17:54 ` Frederick Eaton
1 sibling, 0 replies; 17+ messages in thread
From: Frederick Eaton @ 2019-02-19 17:54 UTC (permalink / raw)
To: git
Cc: Junio C Hamano, Eric Sunshine, Jonathan Nieder,
Theodore Y. Ts'o, Frederick Eaton
Signed-off-by: Frederick Eaton <frederik@ofb.net>
---
Documentation/cmd-list.perl | 2 +-
command-list.txt | 295 +++++++++++++++++++-----------------
2 files changed, 158 insertions(+), 139 deletions(-)
diff --git a/Documentation/cmd-list.perl b/Documentation/cmd-list.perl
index 5aa73cfe45..62c32f58da 100755
--- a/Documentation/cmd-list.perl
+++ b/Documentation/cmd-list.perl
@@ -43,7 +43,7 @@ sub format_one {
}
my %cmds = ();
-for (sort <>) {
+for (<>) {
next if /^#/;
chomp;
diff --git a/command-list.txt b/command-list.txt
index 3a9af104b5..fb088dadea 100644
--- a/command-list.txt
+++ b/command-list.txt
@@ -43,164 +43,183 @@
# specified here, which can only have "guide" attribute and nothing
# else.
#
+# February 2019: This list had been sorted alphabetically but has been
+# reordered to make it easier for people to learn from the main git(1)
+# manual page. The new ordering is according to approximate usefulness
+# / frequency of use / order of use, with some grouping by topic. The
+# idea is to make it possible to read the manual page from beginning
+# to end and see the most important commands first, rather than
+# getting them in alphabetical order - in other words, to make the
+# manual page more like a table of contents and less like an index.
+# Please consider this when adding new commands.
+#
### command list (do not change this line, also do not change alignment)
# command name category [category] [category]
+# From gittutorial
+git-help ancillaryinterrogators complete
+git-config ancillarymanipulators complete
+git-clone mainporcelain init
+git-init mainporcelain init
git-add mainporcelain worktree
-git-am mainporcelain
-git-annotate ancillaryinterrogators
-git-apply plumbingmanipulators complete
-git-archimport foreignscminterface
-git-archive mainporcelain
-git-bisect mainporcelain info
-git-blame ancillaryinterrogators complete
+git-commit mainporcelain history
+git-diff mainporcelain history
+git-status mainporcelain info
+git-log mainporcelain info
git-branch mainporcelain history
-git-bundle mainporcelain
-git-cat-file plumbinginterrogators
-git-check-attr purehelpers
-git-check-ignore purehelpers
-git-check-mailmap purehelpers
git-checkout mainporcelain history
+git-merge mainporcelain history
+gitk mainporcelain
+git-pull mainporcelain remote
+git-fetch mainporcelain remote
+# From tutorial NEXT STEPS
+git-format-patch mainporcelain
+git-bisect mainporcelain info
+giteveryday guide
+gitworkflows guide
+gitcvs-migration guide
+# From giteveryday
+git-reset mainporcelain worktree
+git-rebase mainporcelain history
+git-tag mainporcelain history
+git-push mainporcelain remote
+git-send-email foreignscminterface complete
+git-request-pull foreignscminterface complete
+git-am mainporcelain
+git-revert mainporcelain
+git-daemon synchingrepositories
+git-shell synchelpers
+git-http-backend synchingrepositories
+gitweb ancillaryinterrogators
+# From user feedback
+git-grep mainporcelain info
+git-show mainporcelain info
+git-submodule mainporcelain
+git-cherry-pick mainporcelain
+git-clean mainporcelain
+# From gittutorial-2
+git-cat-file plumbinginterrogators
+git-ls-tree plumbinginterrogators
+git-ls-files plumbinginterrogators
+gitcore-tutorial guide
+gitglossary guide
+# From gitcore-tutorial
+git-update-index plumbingmanipulators
+git-diff-files plumbinginterrogators
+git-write-tree plumbingmanipulators
+git-read-tree plumbingmanipulators
git-checkout-index plumbingmanipulators
-git-check-ref-format purehelpers
+git-show-branch ancillaryinterrogators complete
+git-name-rev plumbinginterrogators
+git-merge-index plumbingmanipulators
+git-repack ancillarymanipulators complete
+git-prune-packed plumbingmanipulators
+git-update-server-info synchingrepositories
+git-prune ancillarymanipulators
git-cherry plumbinginterrogators complete
-git-cherry-pick mainporcelain
+# Guides, reordered
+gittutorial guide
+gittutorial-2 guide
+gitrevisions guide
+gitignore guide
+gitcli guide
+gitrepository-layout guide
+gitdiffcore guide
+gitmodules guide
+githooks guide
+gitnamespaces guide
+gitattributes guide
+# All other commands, sorted by man page category and then by
+# approximate priority
+git-stash mainporcelain
+git-rm mainporcelain worktree
+git-mv mainporcelain worktree
+git-gui mainporcelain
git-citool mainporcelain
-git-clean mainporcelain
-git-clone mainporcelain init
-git-column purehelpers
-git-commit mainporcelain history
-git-commit-graph plumbingmanipulators
-git-commit-tree plumbingmanipulators
-git-config ancillarymanipulators complete
-git-count-objects ancillaryinterrogators
-git-credential purehelpers
-git-credential-cache purehelpers
-git-credential-store purehelpers
-git-cvsexportcommit foreignscminterface
-git-cvsimport foreignscminterface
-git-cvsserver foreignscminterface
-git-daemon synchingrepositories
+git-archive mainporcelain
+git-shortlog mainporcelain
git-describe mainporcelain
-git-diff mainporcelain history
-git-diff-files plumbinginterrogators
-git-diff-index plumbinginterrogators
-git-diff-tree plumbinginterrogators
-git-difftool ancillaryinterrogators complete
+git-gc mainporcelain
+git-notes mainporcelain
+git-worktree mainporcelain
+git-bundle mainporcelain
+git-range-diff mainporcelain
+git-stage complete
+git-reflog ancillarymanipulators complete
+git-remote ancillarymanipulators complete
+git-mergetool ancillarymanipulators complete
+git-filter-branch ancillarymanipulators
+git-replace ancillarymanipulators complete
git-fast-export ancillarymanipulators
git-fast-import ancillarymanipulators
-git-fetch mainporcelain remote
-git-fetch-pack synchingrepositories
-git-filter-branch ancillarymanipulators
-git-fmt-merge-msg purehelpers
-git-for-each-ref plumbinginterrogators
-git-format-patch mainporcelain
-git-fsck ancillaryinterrogators complete
-git-gc mainporcelain
-git-get-tar-commit-id plumbinginterrogators
-git-grep mainporcelain info
-git-gui mainporcelain
-git-hash-object plumbingmanipulators
-git-help ancillaryinterrogators complete
-git-http-backend synchingrepositories
-git-http-fetch synchelpers
-git-http-push synchelpers
+git-pack-refs ancillarymanipulators
+git-cvsimport foreignscminterface
+git-cvsserver foreignscminterface
+git-cvsexportcommit foreignscminterface
+git-svn foreignscminterface
+git-p4 foreignscminterface
+git-quiltimport foreignscminterface
+git-archimport foreignscminterface
git-imap-send foreignscminterface
-git-index-pack plumbingmanipulators
-git-init mainporcelain init
-git-instaweb ancillaryinterrogators complete
-git-interpret-trailers purehelpers
-gitk mainporcelain
-git-log mainporcelain info
-git-ls-files plumbinginterrogators
-git-ls-remote plumbinginterrogators
-git-ls-tree plumbinginterrogators
-git-mailinfo purehelpers
-git-mailsplit purehelpers
-git-merge mainporcelain history
-git-merge-base plumbinginterrogators
+git-apply plumbingmanipulators complete
git-merge-file plumbingmanipulators
-git-merge-index plumbingmanipulators
-git-merge-one-file purehelpers
-git-mergetool ancillarymanipulators complete
-git-merge-tree ancillaryinterrogators
-git-multi-pack-index plumbingmanipulators
git-mktag plumbingmanipulators
+git-hash-object plumbingmanipulators
+git-update-ref plumbingmanipulators
+git-symbolic-ref plumbingmanipulators
+git-commit-tree plumbingmanipulators
+git-commit-graph plumbingmanipulators
git-mktree plumbingmanipulators
-git-mv mainporcelain worktree
-git-name-rev plumbinginterrogators
-git-notes mainporcelain
-git-p4 foreignscminterface
git-pack-objects plumbingmanipulators
-git-pack-redundant plumbinginterrogators
-git-pack-refs ancillarymanipulators
+git-unpack-objects plumbingmanipulators
+git-index-pack plumbingmanipulators
+git-multi-pack-index plumbingmanipulators
+git-blame ancillaryinterrogators complete
+git-annotate ancillaryinterrogators
+git-instaweb ancillaryinterrogators complete
+git-rerere ancillaryinterrogators
+git-fsck ancillaryinterrogators complete
+git-whatchanged ancillaryinterrogators complete
+git-difftool ancillaryinterrogators complete
+git-merge-tree ancillaryinterrogators
+git-count-objects ancillaryinterrogators
+git-verify-commit ancillaryinterrogators
+git-verify-tag ancillaryinterrogators
+git-send-pack synchingrepositories
+git-fetch-pack synchingrepositories
git-parse-remote synchelpers
-git-patch-id purehelpers
-git-prune ancillarymanipulators
-git-prune-packed plumbingmanipulators
-git-pull mainporcelain remote
-git-push mainporcelain remote
-git-quiltimport foreignscminterface
-git-range-diff mainporcelain
-git-read-tree plumbingmanipulators
-git-rebase mainporcelain history
git-receive-pack synchelpers
-git-reflog ancillarymanipulators complete
-git-remote ancillarymanipulators complete
-git-repack ancillarymanipulators complete
-git-replace ancillarymanipulators complete
-git-request-pull foreignscminterface complete
-git-rerere ancillaryinterrogators
-git-reset mainporcelain worktree
-git-revert mainporcelain
+git-upload-pack synchelpers
+git-upload-archive synchelpers
+git-http-fetch synchelpers
+git-http-push synchelpers
+git-var plumbinginterrogators
git-rev-list plumbinginterrogators
git-rev-parse plumbinginterrogators
-git-rm mainporcelain worktree
-git-send-email foreignscminterface complete
-git-send-pack synchingrepositories
-git-shell synchelpers
-git-shortlog mainporcelain
-git-show mainporcelain info
-git-show-branch ancillaryinterrogators complete
-git-show-index plumbinginterrogators
+git-for-each-ref plumbinginterrogators
git-show-ref plumbinginterrogators
-git-sh-i18n purehelpers
+git-ls-remote plumbinginterrogators
+git-diff-tree plumbinginterrogators
+git-diff-index plumbinginterrogators
+git-merge-base plumbinginterrogators
+git-verify-pack plumbinginterrogators
+git-pack-redundant plumbinginterrogators
+git-unpack-file plumbinginterrogators
+git-show-index plumbinginterrogators
+git-get-tar-commit-id plumbinginterrogators
+git-merge-one-file purehelpers
git-sh-setup purehelpers
-git-stash mainporcelain
-git-stage complete
-git-status mainporcelain info
+git-check-ref-format purehelpers
+git-check-ignore purehelpers
+git-check-attr purehelpers
+git-credential purehelpers
+git-credential-cache purehelpers
+git-credential-store purehelpers
+git-fmt-merge-msg purehelpers
+git-check-mailmap purehelpers
+git-mailsplit purehelpers
+git-mailinfo purehelpers
+git-interpret-trailers purehelpers
+git-column purehelpers
git-stripspace purehelpers
-git-submodule mainporcelain
-git-svn foreignscminterface
-git-symbolic-ref plumbingmanipulators
-git-tag mainporcelain history
-git-unpack-file plumbinginterrogators
-git-unpack-objects plumbingmanipulators
-git-update-index plumbingmanipulators
-git-update-ref plumbingmanipulators
-git-update-server-info synchingrepositories
-git-upload-archive synchelpers
-git-upload-pack synchelpers
-git-var plumbinginterrogators
-git-verify-commit ancillaryinterrogators
-git-verify-pack plumbinginterrogators
-git-verify-tag ancillaryinterrogators
-gitweb ancillaryinterrogators
-git-whatchanged ancillaryinterrogators complete
-git-worktree mainporcelain
-git-write-tree plumbingmanipulators
-gitattributes guide
-gitcli guide
-gitcore-tutorial guide
-gitcvs-migration guide
-gitdiffcore guide
-giteveryday guide
-gitglossary guide
-githooks guide
-gitignore guide
-gitmodules guide
-gitnamespaces guide
-gitrepository-layout guide
-gitrevisions guide
-gittutorial-2 guide
-gittutorial guide
-gitworkflows guide
+git-patch-id purehelpers
+git-sh-i18n purehelpers
--
2.20.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 0/1] de-alphabetize command list
2019-02-19 17:54 ` [PATCH 0/1] de-alphabetize command list Frederick Eaton
@ 2019-02-21 18:05 ` frederik
2019-03-11 9:04 ` frederik
0 siblings, 1 reply; 17+ messages in thread
From: frederik @ 2019-02-21 18:05 UTC (permalink / raw)
To: git; +Cc: Junio C Hamano, Eric Sunshine, Jonathan Nieder,
Theodore Y. Ts'o
[-- Attachment #1: Type: text/plain, Size: 2413 bytes --]
I realized that it would probably be easier to discuss this proposal
if I attached the final command listing and the rendered manual page.
Please find them attached to this message.
Thank you,
Frederick
On Tue, Feb 19, 2019 at 09:54:12AM -0800, Frederick Eaton wrote:
>This is a follow-up to my proposal to de-alphabetize the command
>listings in the git(1) manual page, from 6 July 2018.
>
>Some projects have manual page items listed in alphabetical order,
>some don't. As I argued in my proposal, I find it easier to learn from
>material which is not alphabetized. If this patch is accepted, I hope
>that it will make the Git documentation more accessible to myself and
>others.
>
>I produced the reordered command list in this patch using several
>sources, as indicated by comments in the new command-list.txt file.
>First, all the commands in the main part of "gittutorial(7)" appear in
>order, then the commands in giteveryday(7). Then appear additional
>commands from a friend's shell history, in reverse order of frequency.
>Then gittutorial-2(7), then gitcore-tutorial(7). After that there is a
>list of "guides", followed by about 100 commands not appearing in the
>earlier lists. I kept the guides and the remaining commands in their
>category groupings (guide, mainporcelain, ancillarymanipulators,
>etc.), but ordered the commands within each category according to my
>own judgment after skimming each manual page.
>
>To verify that the new list is a permutation of the most recent list,
>I use the following command (it should produce no output and exit 0):
>
> diff <(git show master:command-list.txt | grep -v '^#' | sort ) <(cat command-list.txt | grep -v '^#' | sort)
>
>Note this patch changes the order of commands appearing in the
>generated file "command-list.h", which mostly seems to be used by
>"help.c". Probably due to the various occurrences of QSORT in
>"help.c", I think this reordering has no visible effect. I am willing
>to do any additional testing which may be recommended to ensure that
>this patch has no undesired consequences.
>
>Frederick Eaton (1):
> Prioritize list of commands appearing in git(1), via command-list.txt.
> Don't invoke 'sort' in Documentation/cmd-list.perl.
>
> Documentation/cmd-list.perl | 2 +-
> command-list.txt | 295 +++++++++++++++++++-----------------
> 2 files changed, 158 insertions(+), 139 deletions(-)
>
>--
>2.20.1
>
[-- Attachment #2: reordered-command-list.txt --]
[-- Type: text/plain, Size: 12100 bytes --]
# Command classification list
# ---------------------------
# All supported commands, builtin or external, must be described in
# here. This info is used to list commands in various places. Each
# command is on one line followed by one or more attributes.
#
# The first attribute group is mandatory and indicates the command
# type. This group includes:
#
# mainporcelain
# ancillarymanipulators
# ancillaryinterrogators
# foreignscminterface
# plumbingmanipulators
# plumbinginterrogators
# synchingrepositories
# synchelpers
# purehelpers
#
# The type names are self explanatory. But if you want to see what
# command belongs to what group to get a better picture, have a look
# at "git" man page, "GIT COMMANDS" section.
#
# Commands of type mainporcelain can also optionally have one of these
# attributes:
#
# init
# worktree
# info
# history
# remote
#
# These commands are considered "common" and will show up in "git
# help" output in groups. Uncommon porcelain commands must not
# specify any of these attributes.
#
# "complete" attribute is used to mark that the command should be
# completable by git-completion.bash. Note that by default,
# mainporcelain commands are completable so you don't need this
# attribute.
#
# As part of the Git man page list, the man(5/7) guides are also
# specified here, which can only have "guide" attribute and nothing
# else.
#
# February 2019: This list had been sorted alphabetically but has been
# reordered to make it easier for people to learn from the main git(1)
# manual page. The new ordering is according to approximate usefulness
# / frequency of use / order of use, with some grouping by topic. The
# idea is to make it possible to read the manual page from beginning
# to end and see the most important commands first, rather than
# getting them in alphabetical order - in other words, to make the
# manual page more like a table of contents and less like an index.
# Please consider this when adding new commands.
#
### command list (do not change this line, also do not change alignment)
# command name category [category] [category]
# From gittutorial
git-help ancillaryinterrogators complete
git-config ancillarymanipulators complete
git-clone mainporcelain init
git-init mainporcelain init
git-add mainporcelain worktree
git-commit mainporcelain history
git-diff mainporcelain history
git-status mainporcelain info
git-log mainporcelain info
git-branch mainporcelain history
git-checkout mainporcelain history
git-merge mainporcelain history
gitk mainporcelain
git-pull mainporcelain remote
git-fetch mainporcelain remote
# From tutorial NEXT STEPS
git-format-patch mainporcelain
git-bisect mainporcelain info
giteveryday guide
gitworkflows guide
gitcvs-migration guide
# From giteveryday
git-reset mainporcelain worktree
git-rebase mainporcelain history
git-tag mainporcelain history
git-push mainporcelain remote
git-send-email foreignscminterface complete
git-request-pull foreignscminterface complete
git-am mainporcelain
git-revert mainporcelain
git-daemon synchingrepositories
git-shell synchelpers
git-http-backend synchingrepositories
gitweb ancillaryinterrogators
# From user feedback
git-grep mainporcelain info
git-show mainporcelain info
git-submodule mainporcelain
git-cherry-pick mainporcelain
git-clean mainporcelain
# From gittutorial-2
git-cat-file plumbinginterrogators
git-ls-tree plumbinginterrogators
git-ls-files plumbinginterrogators
gitcore-tutorial guide
gitglossary guide
# From gitcore-tutorial
git-update-index plumbingmanipulators
git-diff-files plumbinginterrogators
git-write-tree plumbingmanipulators
git-read-tree plumbingmanipulators
git-checkout-index plumbingmanipulators
git-show-branch ancillaryinterrogators complete
git-name-rev plumbinginterrogators
git-merge-index plumbingmanipulators
git-repack ancillarymanipulators complete
git-prune-packed plumbingmanipulators
git-update-server-info synchingrepositories
git-prune ancillarymanipulators
git-cherry plumbinginterrogators complete
# Guides, reordered
gittutorial guide
gittutorial-2 guide
gitrevisions guide
gitignore guide
gitcli guide
gitrepository-layout guide
gitdiffcore guide
gitmodules guide
githooks guide
gitnamespaces guide
gitattributes guide
# All other commands, sorted by man page category and then by
# approximate priority
git-stash mainporcelain
git-rm mainporcelain worktree
git-mv mainporcelain worktree
git-gui mainporcelain
git-citool mainporcelain
git-archive mainporcelain
git-shortlog mainporcelain
git-describe mainporcelain
git-gc mainporcelain
git-notes mainporcelain
git-worktree mainporcelain
git-bundle mainporcelain
git-range-diff mainporcelain
git-stage complete
git-reflog ancillarymanipulators complete
git-remote ancillarymanipulators complete
git-mergetool ancillarymanipulators complete
git-filter-branch ancillarymanipulators
git-replace ancillarymanipulators complete
git-fast-export ancillarymanipulators
git-fast-import ancillarymanipulators
git-pack-refs ancillarymanipulators
git-cvsimport foreignscminterface
git-cvsserver foreignscminterface
git-cvsexportcommit foreignscminterface
git-svn foreignscminterface
git-p4 foreignscminterface
git-quiltimport foreignscminterface
git-archimport foreignscminterface
git-imap-send foreignscminterface
git-apply plumbingmanipulators complete
git-merge-file plumbingmanipulators
git-mktag plumbingmanipulators
git-hash-object plumbingmanipulators
git-update-ref plumbingmanipulators
git-symbolic-ref plumbingmanipulators
git-commit-tree plumbingmanipulators
git-commit-graph plumbingmanipulators
git-mktree plumbingmanipulators
git-pack-objects plumbingmanipulators
git-unpack-objects plumbingmanipulators
git-index-pack plumbingmanipulators
git-multi-pack-index plumbingmanipulators
git-blame ancillaryinterrogators complete
git-annotate ancillaryinterrogators
git-instaweb ancillaryinterrogators complete
git-rerere ancillaryinterrogators
git-fsck ancillaryinterrogators complete
git-whatchanged ancillaryinterrogators complete
git-difftool ancillaryinterrogators complete
git-merge-tree ancillaryinterrogators
git-count-objects ancillaryinterrogators
git-verify-commit ancillaryinterrogators
git-verify-tag ancillaryinterrogators
git-send-pack synchingrepositories
git-fetch-pack synchingrepositories
git-parse-remote synchelpers
git-receive-pack synchelpers
git-upload-pack synchelpers
git-upload-archive synchelpers
git-http-fetch synchelpers
git-http-push synchelpers
git-var plumbinginterrogators
git-rev-list plumbinginterrogators
git-rev-parse plumbinginterrogators
git-for-each-ref plumbinginterrogators
git-show-ref plumbinginterrogators
git-ls-remote plumbinginterrogators
git-diff-tree plumbinginterrogators
git-diff-index plumbinginterrogators
git-merge-base plumbinginterrogators
git-verify-pack plumbinginterrogators
git-pack-redundant plumbinginterrogators
git-unpack-file plumbinginterrogators
git-show-index plumbinginterrogators
git-get-tar-commit-id plumbinginterrogators
git-merge-one-file purehelpers
git-sh-setup purehelpers
git-check-ref-format purehelpers
git-check-ignore purehelpers
git-check-attr purehelpers
git-credential purehelpers
git-credential-cache purehelpers
git-credential-store purehelpers
git-fmt-merge-msg purehelpers
git-check-mailmap purehelpers
git-mailsplit purehelpers
git-mailinfo purehelpers
git-interpret-trailers purehelpers
git-column purehelpers
git-stripspace purehelpers
git-patch-id purehelpers
git-sh-i18n purehelpers
[-- Attachment #3: reordered-git.1.new --]
[-- Type: text/plain, Size: 46921 bytes --]
GIT(1) Git Manual GIT(1)
NAME
git - the stupid content tracker
SYNOPSIS
git [--version] [--help] [-C <path>] [-c <name>=<value>]
[--exec-path[=<path>]] [--html-path] [--man-path] [--info-path]
[-p|--paginate|-P|--no-pager] [--no-replace-objects] [--bare]
[--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>]
[--super-prefix=<path>]
<command> [<args>]
DESCRIPTION
Git is a fast, scalable, distributed revision control system with an
unusually rich command set that provides both high-level operations and
full access to internals.
See gittutorial(7) to get started, then see giteveryday(7) for a useful
minimum set of commands. The Git User's Manual[1] has a more in-depth
introduction.
After you mastered the basic concepts, you can come back to this page
to learn what commands Git offers. You can learn more about individual
Git commands with "git help command". gitcli(7) manual page gives you
an overview of the command-line command syntax.
A formatted and hyperlinked copy of the latest Git documentation can be
viewed at https://git.github.io/htmldocs/git.html.
OPTIONS
--version
Prints the Git suite version that the git program came from.
--help
Prints the synopsis and a list of the most commonly used commands.
If the option --all or -a is given then all available commands are
printed. If a Git command is named this option will bring up the
manual page for that command.
Other options are available to control how the manual page is
displayed. See git-help(1) for more information, because git --help
... is converted internally into git help ....
-C <path>
Run as if git was started in <path> instead of the current working
directory. When multiple -C options are given, each subsequent
non-absolute -C <path> is interpreted relative to the preceding -C
<path>.
This option affects options that expect path name like --git-dir
and --work-tree in that their interpretations of the path names
would be made relative to the working directory caused by the -C
option. For example the following invocations are equivalent:
git --git-dir=a.git --work-tree=b -C c status
git --git-dir=c/a.git --work-tree=c/b status
-c <name>=<value>
Pass a configuration parameter to the command. The value given will
override values from configuration files. The <name> is expected in
the same format as listed by git config (subkeys separated by
dots).
Note that omitting the = in git -c foo.bar ... is allowed and sets
foo.bar to the boolean true value (just like [foo]bar would in a
config file). Including the equals but with an empty value (like
git -c foo.bar= ...) sets foo.bar to the empty string which git
config --type=bool will convert to false.
--exec-path[=<path>]
Path to wherever your core Git programs are installed. This can
also be controlled by setting the GIT_EXEC_PATH environment
variable. If no path is given, git will print the current setting
and then exit.
--html-path
Print the path, without trailing slash, where Git's HTML
documentation is installed and exit.
--man-path
Print the manpath (see man(1)) for the man pages for this version
of Git and exit.
--info-path
Print the path where the Info files documenting this version of Git
are installed and exit.
-p, --paginate
Pipe all output into less (or if set, $PAGER) if standard output is
a terminal. This overrides the pager.<cmd> configuration options
(see the "Configuration Mechanism" section below).
-P, --no-pager
Do not pipe Git output into a pager.
--git-dir=<path>
Set the path to the repository. This can also be controlled by
setting the GIT_DIR environment variable. It can be an absolute
path or relative path to current working directory.
--work-tree=<path>
Set the path to the working tree. It can be an absolute path or a
path relative to the current working directory. This can also be
controlled by setting the GIT_WORK_TREE environment variable and
the core.worktree configuration variable (see core.worktree in git-
config(1) for a more detailed discussion).
--namespace=<path>
Set the Git namespace. See gitnamespaces(7) for more details.
Equivalent to setting the GIT_NAMESPACE environment variable.
--super-prefix=<path>
Currently for internal use only. Set a prefix which gives a path
from above a repository down to its root. One use is to give
submodules context about the superproject that invoked it.
--bare
Treat the repository as a bare repository. If GIT_DIR environment
is not set, it is set to the current working directory.
--no-replace-objects
Do not use replacement refs to replace Git objects. See git-
replace(1) for more information.
--literal-pathspecs
Treat pathspecs literally (i.e. no globbing, no pathspec magic).
This is equivalent to setting the GIT_LITERAL_PATHSPECS environment
variable to 1.
--glob-pathspecs
Add "glob" magic to all pathspec. This is equivalent to setting the
GIT_GLOB_PATHSPECS environment variable to 1. Disabling globbing on
individual pathspecs can be done using pathspec magic ":(literal)"
--noglob-pathspecs
Add "literal" magic to all pathspec. This is equivalent to setting
the GIT_NOGLOB_PATHSPECS environment variable to 1. Enabling
globbing on individual pathspecs can be done using pathspec magic
":(glob)"
--icase-pathspecs
Add "icase" magic to all pathspec. This is equivalent to setting
the GIT_ICASE_PATHSPECS environment variable to 1.
--no-optional-locks
Do not perform optional operations that require locks. This is
equivalent to setting the GIT_OPTIONAL_LOCKS to 0.
--list-cmds=group[,group...]
List commands by group. This is an internal/experimental option and
may change or be removed in the future. Supported groups are:
builtins, parseopt (builtin commands that use parse-options), main
(all commands in libexec directory), others (all other commands in
$PATH that have git- prefix), list-<category> (see categories in
command-list.txt), nohelpers (exclude helper commands), alias and
config (retrieve command list from config variable
completion.commands)
GIT COMMANDS
We divide Git into high level ("porcelain") commands and low level
("plumbing") commands.
HIGH-LEVEL COMMANDS (PORCELAIN)
We separate the porcelain commands into the main commands and some
ancillary user utilities.
Main porcelain commands
git-clone(1)
Clone a repository into a new directory.
git-init(1)
Create an empty Git repository or reinitialize an existing one.
git-add(1)
Add file contents to the index.
git-commit(1)
Record changes to the repository.
git-diff(1)
Show changes between commits, commit and working tree, etc.
git-status(1)
Show the working tree status.
git-log(1)
Show commit logs.
git-branch(1)
List, create, or delete branches.
git-checkout(1)
Switch branches or restore working tree files.
git-merge(1)
Join two or more development histories together.
gitk(1)
The Git repository browser.
git-pull(1)
Fetch from and integrate with another repository or a local branch.
git-fetch(1)
Download objects and refs from another repository.
git-format-patch(1)
Prepare patches for e-mail submission.
git-bisect(1)
Use binary search to find the commit that introduced a bug.
git-reset(1)
Reset current HEAD to the specified state.
git-rebase(1)
Reapply commits on top of another base tip.
git-tag(1)
Create, list, delete or verify a tag object signed with GPG.
git-push(1)
Update remote refs along with associated objects.
git-am(1)
Apply a series of patches from a mailbox.
git-revert(1)
Revert some existing commits.
git-grep(1)
Print lines matching a pattern.
git-show(1)
Show various types of objects.
git-submodule(1)
Initialize, update or inspect submodules.
git-cherry-pick(1)
Apply the changes introduced by some existing commits.
git-clean(1)
Remove untracked files from the working tree.
git-stash(1)
Stash the changes in a dirty working directory away.
git-rm(1)
Remove files from the working tree and from the index.
git-mv(1)
Move or rename a file, a directory, or a symlink.
git-gui(1)
A portable graphical interface to Git.
git-citool(1)
Graphical alternative to git-commit.
git-archive(1)
Create an archive of files from a named tree.
git-shortlog(1)
Summarize git log output.
git-describe(1)
Give an object a human readable name based on an available ref.
git-gc(1)
Cleanup unnecessary files and optimize the local repository.
git-notes(1)
Add or inspect object notes.
git-worktree(1)
Manage multiple working trees.
git-bundle(1)
Move objects and refs by archive.
git-range-diff(1)
Compare two commit ranges (e.g. two versions of a branch).
Ancillary Commands
Manipulators:
git-config(1)
Get and set repository or global options.
git-repack(1)
Pack unpacked objects in a repository.
git-prune(1)
Prune all unreachable objects from the object database.
git-reflog(1)
Manage reflog information.
git-remote(1)
Manage set of tracked repositories.
git-mergetool(1)
Run merge conflict resolution tools to resolve merge conflicts.
git-filter-branch(1)
Rewrite branches.
git-replace(1)
Create, list, delete refs to replace objects.
git-fast-export(1)
Git data exporter.
git-fast-import(1)
Backend for fast Git data importers.
git-pack-refs(1)
Pack heads and tags for efficient repository access.
Interrogators:
git-help(1)
Display help information about Git.
gitweb(1)
Git web interface (web frontend to Git repositories).
git-show-branch(1)
Show branches and their commits.
git-blame(1)
Show what revision and author last modified each line of a file.
git-annotate(1)
Annotate file lines with commit information.
git-instaweb(1)
Instantly browse your working repository in gitweb.
git-rerere(1)
Reuse recorded resolution of conflicted merges.
git-fsck(1)
Verifies the connectivity and validity of the objects in the
database.
git-whatchanged(1)
Show logs with difference each commit introduces.
git-difftool(1)
Show changes using common diff tools.
git-merge-tree(1)
Show three-way merge without touching index.
git-count-objects(1)
Count unpacked number of objects and their disk consumption.
git-verify-commit(1)
Check the GPG signature of commits.
git-verify-tag(1)
Check the GPG signature of tags.
Interacting with Others
These commands are to interact with foreign SCM and with other people
via patch over e-mail.
git-send-email(1)
Send a collection of patches as emails.
git-request-pull(1)
Generates a summary of pending changes.
git-cvsimport(1)
Salvage your data out of another SCM people love to hate.
git-cvsserver(1)
A CVS server emulator for Git.
git-cvsexportcommit(1)
Export a single commit to a CVS checkout.
git-svn(1)
Bidirectional operation between a Subversion repository and Git.
git-p4(1)
Import from and submit to Perforce repositories.
git-quiltimport(1)
Applies a quilt patchset onto the current branch.
git-archimport(1)
Import a GNU Arch repository into Git.
git-imap-send(1)
Send a collection of patches from stdin to an IMAP folder.
LOW-LEVEL COMMANDS (PLUMBING)
Although Git includes its own porcelain layer, its low-level commands
are sufficient to support development of alternative porcelains.
Developers of such porcelains might start by reading about git-update-
index(1) and git-read-tree(1).
The interface (input, output, set of options and the semantics) to
these low-level commands are meant to be a lot more stable than
Porcelain level commands, because these commands are primarily for
scripted use. The interface to Porcelain commands on the other hand are
subject to change in order to improve the end user experience.
The following description divides the low-level commands into commands
that manipulate objects (in the repository, index, and working tree),
commands that interrogate and compare objects, and commands that move
objects and references between repositories.
Manipulation commands
git-update-index(1)
Register file contents in the working tree to the index.
git-write-tree(1)
Create a tree object from the current index.
git-read-tree(1)
Reads tree information into the index.
git-checkout-index(1)
Copy files from the index to the working tree.
git-merge-index(1)
Run a merge for files needing merging.
git-prune-packed(1)
Remove extra objects that are already in pack files.
git-apply(1)
Apply a patch to files and/or to the index.
git-merge-file(1)
Run a three-way file merge.
git-mktag(1)
Creates a tag object.
git-hash-object(1)
Compute object ID and optionally creates a blob from a file.
git-update-ref(1)
Update the object name stored in a ref safely.
git-symbolic-ref(1)
Read, modify and delete symbolic refs.
git-commit-tree(1)
Create a new commit object.
git-commit-graph(1)
Write and verify Git commit-graph files.
git-mktree(1)
Build a tree-object from ls-tree formatted text.
git-pack-objects(1)
Create a packed archive of objects.
git-unpack-objects(1)
Unpack objects from a packed archive.
git-index-pack(1)
Build pack index file for an existing packed archive.
git-multi-pack-index(1)
Write and verify multi-pack-indexes.
Interrogation commands
git-cat-file(1)
Provide content or type and size information for repository
objects.
git-ls-tree(1)
List the contents of a tree object.
git-ls-files(1)
Show information about files in the index and the working tree.
git-diff-files(1)
Compares files in the working tree and the index.
git-name-rev(1)
Find symbolic names for given revs.
git-cherry(1)
Find commits yet to be applied to upstream.
git-var(1)
Show a Git logical variable.
git-rev-list(1)
Lists commit objects in reverse chronological order.
git-rev-parse(1)
Pick out and massage parameters.
git-for-each-ref(1)
Output information on each ref.
git-show-ref(1)
List references in a local repository.
git-ls-remote(1)
List references in a remote repository.
git-diff-tree(1)
Compares the content and mode of blobs found via two tree objects.
git-diff-index(1)
Compare a tree to the working tree or index.
git-merge-base(1)
Find as good common ancestors as possible for a merge.
git-verify-pack(1)
Validate packed Git archive files.
git-pack-redundant(1)
Find redundant pack files.
git-unpack-file(1)
Creates a temporary file with a blob's contents.
git-show-index(1)
Show packed archive index.
git-get-tar-commit-id(1)
Extract commit ID from an archive created using git-archive.
In general, the interrogate commands do not touch the files in the
working tree.
Synching repositories
git-daemon(1)
A really simple server for Git repositories.
git-http-backend(1)
Server side implementation of Git over HTTP.
git-update-server-info(1)
Update auxiliary info file to help dumb servers.
git-send-pack(1)
Push objects over Git protocol to another repository.
git-fetch-pack(1)
Receive missing objects from another repository.
The following are helper commands used by the above; end users
typically do not use them directly.
git-shell(1)
Restricted login shell for Git-only SSH access.
git-parse-remote(1)
Routines to help parsing remote repository access parameters.
git-receive-pack(1)
Receive what is pushed into the repository.
git-upload-pack(1)
Send objects packed back to git-fetch-pack.
git-upload-archive(1)
Send archive back to git-archive.
git-http-fetch(1)
Download from a remote Git repository via HTTP.
git-http-push(1)
Push objects over HTTP/DAV to another repository.
Internal helper commands
These are internal helper commands used by other commands; end users
typically do not use them directly.
git-merge-one-file(1)
The standard helper program to use with git-merge-index.
git-sh-setup(1)
Common Git shell script setup code.
git-check-ref-format(1)
Ensures that a reference name is well formed.
git-check-ignore(1)
Debug gitignore / exclude files.
git-check-attr(1)
Display gitattributes information.
git-credential(1)
Retrieve and store user credentials.
git-credential-cache(1)
Helper to temporarily store passwords in memory.
git-credential-store(1)
Helper to store credentials on disk.
git-fmt-merge-msg(1)
Produce a merge commit message.
git-check-mailmap(1)
Show canonical names and email addresses of contacts.
git-mailsplit(1)
Simple UNIX mbox splitter program.
git-mailinfo(1)
Extracts patch and authorship from a single e-mail message.
git-interpret-trailers(1)
add or parse structured information in commit messages.
git-column(1)
Display data in columns.
git-stripspace(1)
Remove unnecessary whitespace.
git-patch-id(1)
Compute unique ID for a patch.
git-sh-i18n(1)
Git's i18n setup code for shell scripts.
CONFIGURATION MECHANISM
Git uses a simple text format to store customizations that are per
repository and are per user. Such a configuration file may look like
this:
#
# A '#' or ';' character indicates a comment.
#
; core variables
[core]
; Don't trust file modes
filemode = false
; user identity
[user]
name = "Junio C Hamano"
email = "gitster@pobox.com"
Various commands read from the configuration file and adjust their
operation accordingly. See git-config(1) for a list and more details
about the configuration mechanism.
IDENTIFIER TERMINOLOGY
<object>
Indicates the object name for any type of object.
<blob>
Indicates a blob object name.
<tree>
Indicates a tree object name.
<commit>
Indicates a commit object name.
<tree-ish>
Indicates a tree, commit or tag object name. A command that takes a
<tree-ish> argument ultimately wants to operate on a <tree> object
but automatically dereferences <commit> and <tag> objects that
point at a <tree>.
<commit-ish>
Indicates a commit or tag object name. A command that takes a
<commit-ish> argument ultimately wants to operate on a <commit>
object but automatically dereferences <tag> objects that point at a
<commit>.
<type>
Indicates that an object type is required. Currently one of: blob,
tree, commit, or tag.
<file>
Indicates a filename - almost always relative to the root of the
tree structure GIT_INDEX_FILE describes.
SYMBOLIC IDENTIFIERS
Any Git command accepting any <object> can also use the following
symbolic notation:
HEAD
indicates the head of the current branch.
<tag>
a valid tag name (i.e. a refs/tags/<tag> reference).
<head>
a valid head name (i.e. a refs/heads/<head> reference).
For a more complete list of ways to spell object names, see "SPECIFYING
REVISIONS" section in gitrevisions(7).
FILE/DIRECTORY STRUCTURE
Please see the gitrepository-layout(5) document.
Read githooks(5) for more details about each hook.
Higher level SCMs may provide and manage additional information in the
$GIT_DIR.
TERMINOLOGY
Please see gitglossary(7).
ENVIRONMENT VARIABLES
Various Git commands use the following environment variables:
The Git Repository
These environment variables apply to all core Git commands. Nb: it is
worth noting that they may be used/overridden by SCMS sitting above Git
so take care if using a foreign front-end.
GIT_INDEX_FILE
This environment allows the specification of an alternate index
file. If not specified, the default of $GIT_DIR/index is used.
GIT_INDEX_VERSION
This environment variable allows the specification of an index
version for new repositories. It won't affect existing index files.
By default index file version 2 or 3 is used. See git-update-
index(1) for more information.
GIT_OBJECT_DIRECTORY
If the object storage directory is specified via this environment
variable then the sha1 directories are created underneath -
otherwise the default $GIT_DIR/objects directory is used.
GIT_ALTERNATE_OBJECT_DIRECTORIES
Due to the immutable nature of Git objects, old objects can be
archived into shared, read-only directories. This variable
specifies a ":" separated (on Windows ";" separated) list of Git
object directories which can be used to search for Git objects. New
objects will not be written to these directories.
Entries that begin with " (double-quote) will be interpreted as
C-style quoted paths, removing leading and trailing double-quotes
and respecting backslash escapes. E.g., the value
"path-with-\"-and-:-in-it":vanilla-path has two paths:
path-with-"-and-:-in-it and vanilla-path.
GIT_DIR
If the GIT_DIR environment variable is set then it specifies a path
to use instead of the default .git for the base of the repository.
The --git-dir command-line option also sets this value.
GIT_WORK_TREE
Set the path to the root of the working tree. This can also be
controlled by the --work-tree command-line option and the
core.worktree configuration variable.
GIT_NAMESPACE
Set the Git namespace; see gitnamespaces(7) for details. The
--namespace command-line option also sets this value.
GIT_CEILING_DIRECTORIES
This should be a colon-separated list of absolute paths. If set, it
is a list of directories that Git should not chdir up into while
looking for a repository directory (useful for excluding
slow-loading network directories). It will not exclude the current
working directory or a GIT_DIR set on the command line or in the
environment. Normally, Git has to read the entries in this list and
resolve any symlink that might be present in order to compare them
with the current directory. However, if even this access is slow,
you can add an empty entry to the list to tell Git that the
subsequent entries are not symlinks and needn't be resolved; e.g.,
GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink.
GIT_DISCOVERY_ACROSS_FILESYSTEM
When run in a directory that does not have ".git" repository
directory, Git tries to find such a directory in the parent
directories to find the top of the working tree, but by default it
does not cross filesystem boundaries. This environment variable can
be set to true to tell Git not to stop at filesystem boundaries.
Like GIT_CEILING_DIRECTORIES, this will not affect an explicit
repository directory set via GIT_DIR or on the command line.
GIT_COMMON_DIR
If this variable is set to a path, non-worktree files that are
normally in $GIT_DIR will be taken from this path instead.
Worktree-specific files such as HEAD or index are taken from
$GIT_DIR. See gitrepository-layout(5) and git-worktree(1) for
details. This variable has lower precedence than other path
variables such as GIT_INDEX_FILE, GIT_OBJECT_DIRECTORY...
Git Commits
GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME,
GIT_COMMITTER_EMAIL, GIT_COMMITTER_DATE, EMAIL
see git-commit-tree(1)
Git Diffs
GIT_DIFF_OPTS
Only valid setting is "--unified=??" or "-u??" to set the number of
context lines shown when a unified diff is created. This takes
precedence over any "-U" or "--unified" option value passed on the
Git diff command line.
GIT_EXTERNAL_DIFF
When the environment variable GIT_EXTERNAL_DIFF is set, the program
named by it is called, instead of the diff invocation described
above. For a path that is added, removed, or modified,
GIT_EXTERNAL_DIFF is called with 7 parameters:
path old-file old-hex old-mode new-file new-hex new-mode
where:
<old|new>-file
are files GIT_EXTERNAL_DIFF can use to read the contents of
<old|new>,
<old|new>-hex
are the 40-hexdigit SHA-1 hashes,
<old|new>-mode
are the octal representation of the file modes.
The file parameters can point at the user's working file (e.g.
new-file in "git-diff-files"), /dev/null (e.g. old-file when a new
file is added), or a temporary file (e.g. old-file in the index).
GIT_EXTERNAL_DIFF should not worry about unlinking the temporary
file --- it is removed when GIT_EXTERNAL_DIFF exits.
For a path that is unmerged, GIT_EXTERNAL_DIFF is called with 1
parameter, <path>.
For each path GIT_EXTERNAL_DIFF is called, two environment
variables, GIT_DIFF_PATH_COUNTER and GIT_DIFF_PATH_TOTAL are set.
GIT_DIFF_PATH_COUNTER
A 1-based counter incremented by one for every path.
GIT_DIFF_PATH_TOTAL
The total number of paths.
other
GIT_MERGE_VERBOSITY
A number controlling the amount of output shown by the recursive
merge strategy. Overrides merge.verbosity. See git-merge(1)
GIT_PAGER
This environment variable overrides $PAGER. If it is set to an
empty string or to the value "cat", Git will not launch a pager.
See also the core.pager option in git-config(1).
GIT_EDITOR
This environment variable overrides $EDITOR and $VISUAL. It is used
by several Git commands when, on interactive mode, an editor is to
be launched. See also git-var(1) and the core.editor option in git-
config(1).
GIT_SSH, GIT_SSH_COMMAND
If either of these environment variables is set then git fetch and
git push will use the specified command instead of ssh when they
need to connect to a remote system. The command-line parameters
passed to the configured command are determined by the ssh variant.
See ssh.variant option in git-config(1) for details.
+ $GIT_SSH_COMMAND takes precedence over $GIT_SSH, and is interpreted
by the shell, which allows additional arguments to be included.
$GIT_SSH on the other hand must be just the path to a program (which
can be a wrapper shell script, if additional arguments are needed).
+ Usually it is easier to configure any desired options through your
personal .ssh/config file. Please consult your ssh documentation for
further details.
GIT_SSH_VARIANT
If this environment variable is set, it overrides Git's
autodetection whether GIT_SSH/GIT_SSH_COMMAND/core.sshCommand refer
to OpenSSH, plink or tortoiseplink. This variable overrides the
config setting ssh.variant that serves the same purpose.
GIT_ASKPASS
If this environment variable is set, then Git commands which need
to acquire passwords or passphrases (e.g. for HTTP or IMAP
authentication) will call this program with a suitable prompt as
command-line argument and read the password from its STDOUT. See
also the core.askPass option in git-config(1).
GIT_TERMINAL_PROMPT
If this environment variable is set to 0, git will not prompt on
the terminal (e.g., when asking for HTTP authentication).
GIT_CONFIG_NOSYSTEM
Whether to skip reading settings from the system-wide
$(prefix)/etc/gitconfig file. This environment variable can be used
along with $HOME and $XDG_CONFIG_HOME to create a predictable
environment for a picky script, or you can set it temporarily to
avoid using a buggy /etc/gitconfig file while waiting for someone
with sufficient permissions to fix it.
GIT_FLUSH
If this environment variable is set to "1", then commands such as
git blame (in incremental mode), git rev-list, git log, git
check-attr and git check-ignore will force a flush of the output
stream after each record have been flushed. If this variable is set
to "0", the output of these commands will be done using completely
buffered I/O. If this environment variable is not set, Git will
choose buffered or record-oriented flushing based on whether stdout
appears to be redirected to a file or not.
GIT_TRACE
Enables general trace messages, e.g. alias expansion, built-in
command execution and external command execution.
If this variable is set to "1", "2" or "true" (comparison is case
insensitive), trace messages will be printed to stderr.
If the variable is set to an integer value greater than 2 and lower
than 10 (strictly) then Git will interpret this value as an open
file descriptor and will try to write the trace messages into this
file descriptor.
Alternatively, if the variable is set to an absolute path (starting
with a / character), Git will interpret this as a file path and
will try to append the trace messages to it.
Unsetting the variable, or setting it to empty, "0" or "false"
(case insensitive) disables trace messages.
GIT_TRACE_FSMONITOR
Enables trace messages for the filesystem monitor extension. See
GIT_TRACE for available trace output options.
GIT_TRACE_PACK_ACCESS
Enables trace messages for all accesses to any packs. For each
access, the pack file name and an offset in the pack is recorded.
This may be helpful for troubleshooting some pack-related
performance problems. See GIT_TRACE for available trace output
options.
GIT_TRACE_PACKET
Enables trace messages for all packets coming in or out of a given
program. This can help with debugging object negotiation or other
protocol issues. Tracing is turned off at a packet starting with
"PACK" (but see GIT_TRACE_PACKFILE below). See GIT_TRACE for
available trace output options.
GIT_TRACE_PACKFILE
Enables tracing of packfiles sent or received by a given program.
Unlike other trace output, this trace is verbatim: no headers, and
no quoting of binary data. You almost certainly want to direct into
a file (e.g., GIT_TRACE_PACKFILE=/tmp/my.pack) rather than
displaying it on the terminal or mixing it with other trace output.
Note that this is currently only implemented for the client side of
clones and fetches.
GIT_TRACE_PERFORMANCE
Enables performance related trace messages, e.g. total execution
time of each Git command. See GIT_TRACE for available trace output
options.
GIT_TRACE_SETUP
Enables trace messages printing the .git, working tree and current
working directory after Git has completed its setup phase. See
GIT_TRACE for available trace output options.
GIT_TRACE_SHALLOW
Enables trace messages that can help debugging fetching / cloning
of shallow repositories. See GIT_TRACE for available trace output
options.
GIT_TRACE_CURL
Enables a curl full trace dump of all incoming and outgoing data,
including descriptive information, of the git transport protocol.
This is similar to doing curl --trace-ascii on the command line.
This option overrides setting the GIT_CURL_VERBOSE environment
variable. See GIT_TRACE for available trace output options.
GIT_TRACE_CURL_NO_DATA
When a curl trace is enabled (see GIT_TRACE_CURL above), do not
dump data (that is, only dump info lines and headers).
GIT_REDACT_COOKIES
This can be set to a comma-separated list of strings. When a curl
trace is enabled (see GIT_TRACE_CURL above), whenever a "Cookies:"
header sent by the client is dumped, values of cookies whose key is
in that list (case-sensitive) are redacted.
GIT_LITERAL_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs
literally, rather than as glob patterns. For example, running
GIT_LITERAL_PATHSPECS=1 git log -- '*.c' will search for commits
that touch the path *.c, not any paths that the glob *.c matches.
You might want this if you are feeding literal paths to Git (e.g.,
paths previously given to you by git ls-tree, --raw diff output,
etc).
GIT_GLOB_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs as
glob patterns (aka "glob" magic).
GIT_NOGLOB_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs as
literal (aka "literal" magic).
GIT_ICASE_PATHSPECS
Setting this variable to 1 will cause Git to treat all pathspecs as
case-insensitive.
GIT_REFLOG_ACTION
When a ref is updated, reflog entries are created to keep track of
the reason why the ref was updated (which is typically the name of
the high-level command that updated the ref), in addition to the
old and new values of the ref. A scripted Porcelain command can use
set_reflog_action helper function in git-sh-setup to set its name
to this variable when it is invoked as the top level command by the
end user, to be recorded in the body of the reflog.
GIT_REF_PARANOIA
If set to 1, include broken or badly named refs when iterating over
lists of refs. In a normal, non-corrupted repository, this does
nothing. However, enabling it may help git to detect and abort some
operations in the presence of broken refs. Git sets this variable
automatically when performing destructive operations like git-
prune(1). You should not need to set it yourself unless you want to
be paranoid about making sure an operation has touched every ref
(e.g., because you are cloning a repository to make a backup).
GIT_ALLOW_PROTOCOL
If set to a colon-separated list of protocols, behave as if
protocol.allow is set to never, and each of the listed protocols
has protocol.<name>.allow set to always (overriding any existing
configuration). In other words, any protocol not mentioned will be
disallowed (i.e., this is a whitelist, not a blacklist). See the
description of protocol.allow in git-config(1) for more details.
GIT_PROTOCOL_FROM_USER
Set to 0 to prevent protocols used by fetch/push/clone which are
configured to the user state. This is useful to restrict recursive
submodule initialization from an untrusted repository or for
programs which feed potentially-untrusted URLS to git commands. See
git-config(1) for more details.
GIT_PROTOCOL
For internal use only. Used in handshaking the wire protocol.
Contains a colon : separated list of keys with optional values
key[=value]. Presence of unknown keys and values must be ignored.
GIT_OPTIONAL_LOCKS
If set to 0, Git will complete any requested operation without
performing any optional sub-operations that require taking a lock.
For example, this will prevent git status from refreshing the index
as a side effect. This is useful for processes running in the
background which do not want to cause lock contention with other
operations on the repository. Defaults to 1.
GIT_REDIRECT_STDIN, GIT_REDIRECT_STDOUT, GIT_REDIRECT_STDERR
Windows-only: allow redirecting the standard input/output/error
handles to paths specified by the environment variables. This is
particularly useful in multi-threaded applications where the
canonical way to pass standard handles via CreateProcess() is not
an option because it would require the handles to be marked
inheritable (and consequently every spawned process would inherit
them, possibly blocking regular Git operations). The primary
intended use case is to use named pipes for communication (e.g.
\\.\pipe\my-git-stdin-123).
Two special values are supported: off will simply close the
corresponding standard handle, and if GIT_REDIRECT_STDERR is 2>&1,
standard error will be redirected to the same handle as standard
output.
GIT_PRINT_SHA1_ELLIPSIS (deprecated)
If set to yes, print an ellipsis following an (abbreviated) SHA-1
value. This affects indications of detached HEADs (git-checkout(1))
and the raw diff output (git-diff(1)). Printing an ellipsis in the
cases mentioned is no longer considered adequate and support for it
is likely to be removed in the foreseeable future (along with the
variable).
DISCUSSION
More detail on the following is available from the Git concepts chapter
of the user-manual[2] and gitcore-tutorial(7).
A Git project normally consists of a working directory with a ".git"
subdirectory at the top level. The .git directory contains, among other
things, a compressed object database representing the complete history
of the project, an "index" file which links that history to the current
contents of the working tree, and named pointers into that history such
as tags and branch heads.
The object database contains objects of three main types: blobs, which
hold file data; trees, which point to blobs and other trees to build up
directory hierarchies; and commits, which each reference a single tree
and some number of parent commits.
The commit, equivalent to what other systems call a "changeset" or
"version", represents a step in the project's history, and each parent
represents an immediately preceding step. Commits with more than one
parent represent merges of independent lines of development.
All objects are named by the SHA-1 hash of their contents, normally
written as a string of 40 hex digits. Such names are globally unique.
The entire history leading up to a commit can be vouched for by signing
just that commit. A fourth object type, the tag, is provided for this
purpose.
When first created, objects are stored in individual files, but for
efficiency may later be compressed together into "pack files".
Named pointers called refs mark interesting points in history. A ref
may contain the SHA-1 name of an object or the name of another ref.
Refs with names beginning ref/head/ contain the SHA-1 name of the most
recent commit (or "head") of a branch under development. SHA-1 names of
tags of interest are stored under ref/tags/. A special ref named HEAD
contains the name of the currently checked-out branch.
The index file is initialized with a list of all paths and, for each
path, a blob object and a set of attributes. The blob object represents
the contents of the file as of the head of the current branch. The
attributes (last modified time, size, etc.) are taken from the
corresponding file in the working tree. Subsequent changes to the
working tree can be found by comparing these attributes. The index may
be updated with new content, and new commits may be created from the
content stored in the index.
The index is also capable of storing multiple entries (called "stages")
for a given pathname. These stages are used to hold the various
unmerged version of a file when a merge is in progress.
FURTHER DOCUMENTATION
See the references in the "description" section to get started using
Git. The following is probably more detail than necessary for a
first-time user.
The Git concepts chapter of the user-manual[2] and gitcore-tutorial(7)
both provide introductions to the underlying Git architecture.
See gitworkflows(7) for an overview of recommended workflows.
See also the howto[3] documents for some useful examples.
The internals are documented in the Git API documentation[4].
Users migrating from CVS may also want to read gitcvs-migration(7).
AUTHORS
Git was started by Linus Torvalds, and is currently maintained by Junio
C Hamano. Numerous contributions have come from the Git mailing list
<git@vger.kernel.org[5]>.
http://www.openhub.net/p/git/contributors/summary gives you a more
complete list of contributors.
If you have a clone of git.git itself, the output of git-shortlog(1)
and git-blame(1) can show you the authors for specific parts of the
project.
REPORTING BUGS
Report bugs to the Git mailing list <git@vger.kernel.org[5]> where the
development and maintenance is primarily done. You do not have to be
subscribed to the list to send a message there. See the list archive at
https://public-inbox.org/git for previous bug reports and other
discussions.
Issues which are security relevant should be disclosed privately to the
Git Security mailing list <git-security@googlegroups.com[6]>.
SEE ALSO
gittutorial(7), gittutorial-2(7), giteveryday(7), gitcvs-migration(7),
gitglossary(7), gitcore-tutorial(7), gitcli(7), The Git User's
Manual[1], gitworkflows(7)
GIT
Part of the git(1) suite
NOTES
1. Git User's Manual
file:///home/frederik/share/doc/git-doc/user-manual.html
2. Git concepts chapter of the user-manual
file:///home/frederik/share/doc/git-doc/user-manual.html#git-concepts
3. howto
file:///home/frederik/share/doc/git-doc/howto-index.html
4. Git API documentation
file:///home/frederik/share/doc/git-doc/technical/api-index.html
5. git@vger.kernel.org
mailto:git@vger.kernel.org
6. git-security@googlegroups.com
mailto:git-security@googlegroups.com
Git 2.21.0.rc1.9.g3f 02/18/2019 GIT(1)
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/1] de-alphabetize command list
2019-02-21 18:05 ` frederik
@ 2019-03-11 9:04 ` frederik
2019-03-11 14:38 ` Jacob Keller
0 siblings, 1 reply; 17+ messages in thread
From: frederik @ 2019-03-11 9:04 UTC (permalink / raw)
To: git; +Cc: Junio C Hamano, Eric Sunshine, Jonathan Nieder,
Theodore Y. Ts'o
Hey Git people,
I didn't get a reply and I'm not sure what the appropriate ping
interval is, or when I should conclude that no one is interested.
There seemed to be some vaguely positive feedback before I embarked on
this project. At the same time I don't want to pester anyone into
applying patches in a disorganized fashion.
I'm not subscribed to the mailing list so I apologize if I'm out of
tune with a release cycle or current development thrust.
Thanks,
Frederick
On Thu, Feb 21, 2019 at 10:05:22AM -0800, frederik@ofb.net wrote:
>I realized that it would probably be easier to discuss this proposal
>if I attached the final command listing and the rendered manual page.
>Please find them attached to this message.
>
>Thank you,
>
>Frederick
>
>On Tue, Feb 19, 2019 at 09:54:12AM -0800, Frederick Eaton wrote:
>>This is a follow-up to my proposal to de-alphabetize the command
>>listings in the git(1) manual page, from 6 July 2018.
>>
>>Some projects have manual page items listed in alphabetical order,
>>some don't. As I argued in my proposal, I find it easier to learn from
>>material which is not alphabetized. If this patch is accepted, I hope
>>that it will make the Git documentation more accessible to myself and
>>others.
>>
>>I produced the reordered command list in this patch using several
>>sources, as indicated by comments in the new command-list.txt file.
>>First, all the commands in the main part of "gittutorial(7)" appear in
>>order, then the commands in giteveryday(7). Then appear additional
>>commands from a friend's shell history, in reverse order of frequency.
>>Then gittutorial-2(7), then gitcore-tutorial(7). After that there is a
>>list of "guides", followed by about 100 commands not appearing in the
>>earlier lists. I kept the guides and the remaining commands in their
>>category groupings (guide, mainporcelain, ancillarymanipulators,
>>etc.), but ordered the commands within each category according to my
>>own judgment after skimming each manual page.
>>
>>To verify that the new list is a permutation of the most recent list,
>>I use the following command (it should produce no output and exit 0):
>>
>> diff <(git show master:command-list.txt | grep -v '^#' | sort ) <(cat command-list.txt | grep -v '^#' | sort)
>>
>>Note this patch changes the order of commands appearing in the
>>generated file "command-list.h", which mostly seems to be used by
>>"help.c". Probably due to the various occurrences of QSORT in
>>"help.c", I think this reordering has no visible effect. I am willing
>>to do any additional testing which may be recommended to ensure that
>>this patch has no undesired consequences.
>>
>>Frederick Eaton (1):
>> Prioritize list of commands appearing in git(1), via command-list.txt.
>> Don't invoke 'sort' in Documentation/cmd-list.perl.
>>
>>Documentation/cmd-list.perl | 2 +-
>>command-list.txt | 295 +++++++++++++++++++-----------------
>>2 files changed, 158 insertions(+), 139 deletions(-)
>>
>>--
>>2.20.1
>>
># Command classification list
># ---------------------------
># All supported commands, builtin or external, must be described in
># here. This info is used to list commands in various places. Each
># command is on one line followed by one or more attributes.
>#
># The first attribute group is mandatory and indicates the command
># type. This group includes:
>#
># mainporcelain
># ancillarymanipulators
># ancillaryinterrogators
># foreignscminterface
># plumbingmanipulators
># plumbinginterrogators
># synchingrepositories
># synchelpers
># purehelpers
>#
># The type names are self explanatory. But if you want to see what
># command belongs to what group to get a better picture, have a look
># at "git" man page, "GIT COMMANDS" section.
>#
># Commands of type mainporcelain can also optionally have one of these
># attributes:
>#
># init
># worktree
># info
># history
># remote
>#
># These commands are considered "common" and will show up in "git
># help" output in groups. Uncommon porcelain commands must not
># specify any of these attributes.
>#
># "complete" attribute is used to mark that the command should be
># completable by git-completion.bash. Note that by default,
># mainporcelain commands are completable so you don't need this
># attribute.
>#
># As part of the Git man page list, the man(5/7) guides are also
># specified here, which can only have "guide" attribute and nothing
># else.
>#
># February 2019: This list had been sorted alphabetically but has been
># reordered to make it easier for people to learn from the main git(1)
># manual page. The new ordering is according to approximate usefulness
># / frequency of use / order of use, with some grouping by topic. The
># idea is to make it possible to read the manual page from beginning
># to end and see the most important commands first, rather than
># getting them in alphabetical order - in other words, to make the
># manual page more like a table of contents and less like an index.
># Please consider this when adding new commands.
>#
>### command list (do not change this line, also do not change alignment)
># command name category [category] [category]
># From gittutorial
>git-help ancillaryinterrogators complete
>git-config ancillarymanipulators complete
>git-clone mainporcelain init
>git-init mainporcelain init
>git-add mainporcelain worktree
>git-commit mainporcelain history
>git-diff mainporcelain history
>git-status mainporcelain info
>git-log mainporcelain info
>git-branch mainporcelain history
>git-checkout mainporcelain history
>git-merge mainporcelain history
>gitk mainporcelain
>git-pull mainporcelain remote
>git-fetch mainporcelain remote
># From tutorial NEXT STEPS
>git-format-patch mainporcelain
>git-bisect mainporcelain info
>giteveryday guide
>gitworkflows guide
>gitcvs-migration guide
># From giteveryday
>git-reset mainporcelain worktree
>git-rebase mainporcelain history
>git-tag mainporcelain history
>git-push mainporcelain remote
>git-send-email foreignscminterface complete
>git-request-pull foreignscminterface complete
>git-am mainporcelain
>git-revert mainporcelain
>git-daemon synchingrepositories
>git-shell synchelpers
>git-http-backend synchingrepositories
>gitweb ancillaryinterrogators
># From user feedback
>git-grep mainporcelain info
>git-show mainporcelain info
>git-submodule mainporcelain
>git-cherry-pick mainporcelain
>git-clean mainporcelain
># From gittutorial-2
>git-cat-file plumbinginterrogators
>git-ls-tree plumbinginterrogators
>git-ls-files plumbinginterrogators
>gitcore-tutorial guide
>gitglossary guide
># From gitcore-tutorial
>git-update-index plumbingmanipulators
>git-diff-files plumbinginterrogators
>git-write-tree plumbingmanipulators
>git-read-tree plumbingmanipulators
>git-checkout-index plumbingmanipulators
>git-show-branch ancillaryinterrogators complete
>git-name-rev plumbinginterrogators
>git-merge-index plumbingmanipulators
>git-repack ancillarymanipulators complete
>git-prune-packed plumbingmanipulators
>git-update-server-info synchingrepositories
>git-prune ancillarymanipulators
>git-cherry plumbinginterrogators complete
># Guides, reordered
>gittutorial guide
>gittutorial-2 guide
>gitrevisions guide
>gitignore guide
>gitcli guide
>gitrepository-layout guide
>gitdiffcore guide
>gitmodules guide
>githooks guide
>gitnamespaces guide
>gitattributes guide
># All other commands, sorted by man page category and then by
># approximate priority
>git-stash mainporcelain
>git-rm mainporcelain worktree
>git-mv mainporcelain worktree
>git-gui mainporcelain
>git-citool mainporcelain
>git-archive mainporcelain
>git-shortlog mainporcelain
>git-describe mainporcelain
>git-gc mainporcelain
>git-notes mainporcelain
>git-worktree mainporcelain
>git-bundle mainporcelain
>git-range-diff mainporcelain
>git-stage complete
>git-reflog ancillarymanipulators complete
>git-remote ancillarymanipulators complete
>git-mergetool ancillarymanipulators complete
>git-filter-branch ancillarymanipulators
>git-replace ancillarymanipulators complete
>git-fast-export ancillarymanipulators
>git-fast-import ancillarymanipulators
>git-pack-refs ancillarymanipulators
>git-cvsimport foreignscminterface
>git-cvsserver foreignscminterface
>git-cvsexportcommit foreignscminterface
>git-svn foreignscminterface
>git-p4 foreignscminterface
>git-quiltimport foreignscminterface
>git-archimport foreignscminterface
>git-imap-send foreignscminterface
>git-apply plumbingmanipulators complete
>git-merge-file plumbingmanipulators
>git-mktag plumbingmanipulators
>git-hash-object plumbingmanipulators
>git-update-ref plumbingmanipulators
>git-symbolic-ref plumbingmanipulators
>git-commit-tree plumbingmanipulators
>git-commit-graph plumbingmanipulators
>git-mktree plumbingmanipulators
>git-pack-objects plumbingmanipulators
>git-unpack-objects plumbingmanipulators
>git-index-pack plumbingmanipulators
>git-multi-pack-index plumbingmanipulators
>git-blame ancillaryinterrogators complete
>git-annotate ancillaryinterrogators
>git-instaweb ancillaryinterrogators complete
>git-rerere ancillaryinterrogators
>git-fsck ancillaryinterrogators complete
>git-whatchanged ancillaryinterrogators complete
>git-difftool ancillaryinterrogators complete
>git-merge-tree ancillaryinterrogators
>git-count-objects ancillaryinterrogators
>git-verify-commit ancillaryinterrogators
>git-verify-tag ancillaryinterrogators
>git-send-pack synchingrepositories
>git-fetch-pack synchingrepositories
>git-parse-remote synchelpers
>git-receive-pack synchelpers
>git-upload-pack synchelpers
>git-upload-archive synchelpers
>git-http-fetch synchelpers
>git-http-push synchelpers
>git-var plumbinginterrogators
>git-rev-list plumbinginterrogators
>git-rev-parse plumbinginterrogators
>git-for-each-ref plumbinginterrogators
>git-show-ref plumbinginterrogators
>git-ls-remote plumbinginterrogators
>git-diff-tree plumbinginterrogators
>git-diff-index plumbinginterrogators
>git-merge-base plumbinginterrogators
>git-verify-pack plumbinginterrogators
>git-pack-redundant plumbinginterrogators
>git-unpack-file plumbinginterrogators
>git-show-index plumbinginterrogators
>git-get-tar-commit-id plumbinginterrogators
>git-merge-one-file purehelpers
>git-sh-setup purehelpers
>git-check-ref-format purehelpers
>git-check-ignore purehelpers
>git-check-attr purehelpers
>git-credential purehelpers
>git-credential-cache purehelpers
>git-credential-store purehelpers
>git-fmt-merge-msg purehelpers
>git-check-mailmap purehelpers
>git-mailsplit purehelpers
>git-mailinfo purehelpers
>git-interpret-trailers purehelpers
>git-column purehelpers
>git-stripspace purehelpers
>git-patch-id purehelpers
>git-sh-i18n purehelpers
>GIT(1) Git Manual GIT(1)
>
>NAME
> git - the stupid content tracker
>
>SYNOPSIS
> git [--version] [--help] [-C <path>] [-c <name>=<value>]
> [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path]
> [-p|--paginate|-P|--no-pager] [--no-replace-objects] [--bare]
> [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>]
> [--super-prefix=<path>]
> <command> [<args>]
>
>DESCRIPTION
> Git is a fast, scalable, distributed revision control system with an
> unusually rich command set that provides both high-level operations and
> full access to internals.
>
> See gittutorial(7) to get started, then see giteveryday(7) for a useful
> minimum set of commands. The Git User's Manual[1] has a more in-depth
> introduction.
>
> After you mastered the basic concepts, you can come back to this page
> to learn what commands Git offers. You can learn more about individual
> Git commands with "git help command". gitcli(7) manual page gives you
> an overview of the command-line command syntax.
>
> A formatted and hyperlinked copy of the latest Git documentation can be
> viewed at https://git.github.io/htmldocs/git.html.
>
>OPTIONS
> --version
> Prints the Git suite version that the git program came from.
>
> --help
> Prints the synopsis and a list of the most commonly used commands.
> If the option --all or -a is given then all available commands are
> printed. If a Git command is named this option will bring up the
> manual page for that command.
>
> Other options are available to control how the manual page is
> displayed. See git-help(1) for more information, because git --help
> ... is converted internally into git help ....
>
> -C <path>
> Run as if git was started in <path> instead of the current working
> directory. When multiple -C options are given, each subsequent
> non-absolute -C <path> is interpreted relative to the preceding -C
> <path>.
>
> This option affects options that expect path name like --git-dir
> and --work-tree in that their interpretations of the path names
> would be made relative to the working directory caused by the -C
> option. For example the following invocations are equivalent:
>
> git --git-dir=a.git --work-tree=b -C c status
> git --git-dir=c/a.git --work-tree=c/b status
>
> -c <name>=<value>
> Pass a configuration parameter to the command. The value given will
> override values from configuration files. The <name> is expected in
> the same format as listed by git config (subkeys separated by
> dots).
>
> Note that omitting the = in git -c foo.bar ... is allowed and sets
> foo.bar to the boolean true value (just like [foo]bar would in a
> config file). Including the equals but with an empty value (like
> git -c foo.bar= ...) sets foo.bar to the empty string which git
> config --type=bool will convert to false.
>
> --exec-path[=<path>]
> Path to wherever your core Git programs are installed. This can
> also be controlled by setting the GIT_EXEC_PATH environment
> variable. If no path is given, git will print the current setting
> and then exit.
>
> --html-path
> Print the path, without trailing slash, where Git's HTML
> documentation is installed and exit.
>
> --man-path
> Print the manpath (see man(1)) for the man pages for this version
> of Git and exit.
>
> --info-path
> Print the path where the Info files documenting this version of Git
> are installed and exit.
>
> -p, --paginate
> Pipe all output into less (or if set, $PAGER) if standard output is
> a terminal. This overrides the pager.<cmd> configuration options
> (see the "Configuration Mechanism" section below).
>
> -P, --no-pager
> Do not pipe Git output into a pager.
>
> --git-dir=<path>
> Set the path to the repository. This can also be controlled by
> setting the GIT_DIR environment variable. It can be an absolute
> path or relative path to current working directory.
>
> --work-tree=<path>
> Set the path to the working tree. It can be an absolute path or a
> path relative to the current working directory. This can also be
> controlled by setting the GIT_WORK_TREE environment variable and
> the core.worktree configuration variable (see core.worktree in git-
> config(1) for a more detailed discussion).
>
> --namespace=<path>
> Set the Git namespace. See gitnamespaces(7) for more details.
> Equivalent to setting the GIT_NAMESPACE environment variable.
>
> --super-prefix=<path>
> Currently for internal use only. Set a prefix which gives a path
> from above a repository down to its root. One use is to give
> submodules context about the superproject that invoked it.
>
> --bare
> Treat the repository as a bare repository. If GIT_DIR environment
> is not set, it is set to the current working directory.
>
> --no-replace-objects
> Do not use replacement refs to replace Git objects. See git-
> replace(1) for more information.
>
> --literal-pathspecs
> Treat pathspecs literally (i.e. no globbing, no pathspec magic).
> This is equivalent to setting the GIT_LITERAL_PATHSPECS environment
> variable to 1.
>
> --glob-pathspecs
> Add "glob" magic to all pathspec. This is equivalent to setting the
> GIT_GLOB_PATHSPECS environment variable to 1. Disabling globbing on
> individual pathspecs can be done using pathspec magic ":(literal)"
>
> --noglob-pathspecs
> Add "literal" magic to all pathspec. This is equivalent to setting
> the GIT_NOGLOB_PATHSPECS environment variable to 1. Enabling
> globbing on individual pathspecs can be done using pathspec magic
> ":(glob)"
>
> --icase-pathspecs
> Add "icase" magic to all pathspec. This is equivalent to setting
> the GIT_ICASE_PATHSPECS environment variable to 1.
>
> --no-optional-locks
> Do not perform optional operations that require locks. This is
> equivalent to setting the GIT_OPTIONAL_LOCKS to 0.
>
> --list-cmds=group[,group...]
> List commands by group. This is an internal/experimental option and
> may change or be removed in the future. Supported groups are:
> builtins, parseopt (builtin commands that use parse-options), main
> (all commands in libexec directory), others (all other commands in
> $PATH that have git- prefix), list-<category> (see categories in
> command-list.txt), nohelpers (exclude helper commands), alias and
> config (retrieve command list from config variable
> completion.commands)
>
>GIT COMMANDS
> We divide Git into high level ("porcelain") commands and low level
> ("plumbing") commands.
>
>HIGH-LEVEL COMMANDS (PORCELAIN)
> We separate the porcelain commands into the main commands and some
> ancillary user utilities.
>
> Main porcelain commands
> git-clone(1)
> Clone a repository into a new directory.
>
> git-init(1)
> Create an empty Git repository or reinitialize an existing one.
>
> git-add(1)
> Add file contents to the index.
>
> git-commit(1)
> Record changes to the repository.
>
> git-diff(1)
> Show changes between commits, commit and working tree, etc.
>
> git-status(1)
> Show the working tree status.
>
> git-log(1)
> Show commit logs.
>
> git-branch(1)
> List, create, or delete branches.
>
> git-checkout(1)
> Switch branches or restore working tree files.
>
> git-merge(1)
> Join two or more development histories together.
>
> gitk(1)
> The Git repository browser.
>
> git-pull(1)
> Fetch from and integrate with another repository or a local branch.
>
> git-fetch(1)
> Download objects and refs from another repository.
>
> git-format-patch(1)
> Prepare patches for e-mail submission.
>
> git-bisect(1)
> Use binary search to find the commit that introduced a bug.
>
> git-reset(1)
> Reset current HEAD to the specified state.
>
> git-rebase(1)
> Reapply commits on top of another base tip.
>
> git-tag(1)
> Create, list, delete or verify a tag object signed with GPG.
>
> git-push(1)
> Update remote refs along with associated objects.
>
> git-am(1)
> Apply a series of patches from a mailbox.
>
> git-revert(1)
> Revert some existing commits.
>
> git-grep(1)
> Print lines matching a pattern.
>
> git-show(1)
> Show various types of objects.
>
> git-submodule(1)
> Initialize, update or inspect submodules.
>
> git-cherry-pick(1)
> Apply the changes introduced by some existing commits.
>
> git-clean(1)
> Remove untracked files from the working tree.
>
> git-stash(1)
> Stash the changes in a dirty working directory away.
>
> git-rm(1)
> Remove files from the working tree and from the index.
>
> git-mv(1)
> Move or rename a file, a directory, or a symlink.
>
> git-gui(1)
> A portable graphical interface to Git.
>
> git-citool(1)
> Graphical alternative to git-commit.
>
> git-archive(1)
> Create an archive of files from a named tree.
>
> git-shortlog(1)
> Summarize git log output.
>
> git-describe(1)
> Give an object a human readable name based on an available ref.
>
> git-gc(1)
> Cleanup unnecessary files and optimize the local repository.
>
> git-notes(1)
> Add or inspect object notes.
>
> git-worktree(1)
> Manage multiple working trees.
>
> git-bundle(1)
> Move objects and refs by archive.
>
> git-range-diff(1)
> Compare two commit ranges (e.g. two versions of a branch).
>
> Ancillary Commands
> Manipulators:
>
> git-config(1)
> Get and set repository or global options.
>
> git-repack(1)
> Pack unpacked objects in a repository.
>
> git-prune(1)
> Prune all unreachable objects from the object database.
>
> git-reflog(1)
> Manage reflog information.
>
> git-remote(1)
> Manage set of tracked repositories.
>
> git-mergetool(1)
> Run merge conflict resolution tools to resolve merge conflicts.
>
> git-filter-branch(1)
> Rewrite branches.
>
> git-replace(1)
> Create, list, delete refs to replace objects.
>
> git-fast-export(1)
> Git data exporter.
>
> git-fast-import(1)
> Backend for fast Git data importers.
>
> git-pack-refs(1)
> Pack heads and tags for efficient repository access.
>
> Interrogators:
>
> git-help(1)
> Display help information about Git.
>
> gitweb(1)
> Git web interface (web frontend to Git repositories).
>
> git-show-branch(1)
> Show branches and their commits.
>
> git-blame(1)
> Show what revision and author last modified each line of a file.
>
> git-annotate(1)
> Annotate file lines with commit information.
>
> git-instaweb(1)
> Instantly browse your working repository in gitweb.
>
> git-rerere(1)
> Reuse recorded resolution of conflicted merges.
>
> git-fsck(1)
> Verifies the connectivity and validity of the objects in the
> database.
>
> git-whatchanged(1)
> Show logs with difference each commit introduces.
>
> git-difftool(1)
> Show changes using common diff tools.
>
> git-merge-tree(1)
> Show three-way merge without touching index.
>
> git-count-objects(1)
> Count unpacked number of objects and their disk consumption.
>
> git-verify-commit(1)
> Check the GPG signature of commits.
>
> git-verify-tag(1)
> Check the GPG signature of tags.
>
> Interacting with Others
> These commands are to interact with foreign SCM and with other people
> via patch over e-mail.
>
> git-send-email(1)
> Send a collection of patches as emails.
>
> git-request-pull(1)
> Generates a summary of pending changes.
>
> git-cvsimport(1)
> Salvage your data out of another SCM people love to hate.
>
> git-cvsserver(1)
> A CVS server emulator for Git.
>
> git-cvsexportcommit(1)
> Export a single commit to a CVS checkout.
>
> git-svn(1)
> Bidirectional operation between a Subversion repository and Git.
>
> git-p4(1)
> Import from and submit to Perforce repositories.
>
> git-quiltimport(1)
> Applies a quilt patchset onto the current branch.
>
> git-archimport(1)
> Import a GNU Arch repository into Git.
>
> git-imap-send(1)
> Send a collection of patches from stdin to an IMAP folder.
>
>LOW-LEVEL COMMANDS (PLUMBING)
> Although Git includes its own porcelain layer, its low-level commands
> are sufficient to support development of alternative porcelains.
> Developers of such porcelains might start by reading about git-update-
> index(1) and git-read-tree(1).
>
> The interface (input, output, set of options and the semantics) to
> these low-level commands are meant to be a lot more stable than
> Porcelain level commands, because these commands are primarily for
> scripted use. The interface to Porcelain commands on the other hand are
> subject to change in order to improve the end user experience.
>
> The following description divides the low-level commands into commands
> that manipulate objects (in the repository, index, and working tree),
> commands that interrogate and compare objects, and commands that move
> objects and references between repositories.
>
> Manipulation commands
> git-update-index(1)
> Register file contents in the working tree to the index.
>
> git-write-tree(1)
> Create a tree object from the current index.
>
> git-read-tree(1)
> Reads tree information into the index.
>
> git-checkout-index(1)
> Copy files from the index to the working tree.
>
> git-merge-index(1)
> Run a merge for files needing merging.
>
> git-prune-packed(1)
> Remove extra objects that are already in pack files.
>
> git-apply(1)
> Apply a patch to files and/or to the index.
>
> git-merge-file(1)
> Run a three-way file merge.
>
> git-mktag(1)
> Creates a tag object.
>
> git-hash-object(1)
> Compute object ID and optionally creates a blob from a file.
>
> git-update-ref(1)
> Update the object name stored in a ref safely.
>
> git-symbolic-ref(1)
> Read, modify and delete symbolic refs.
>
> git-commit-tree(1)
> Create a new commit object.
>
> git-commit-graph(1)
> Write and verify Git commit-graph files.
>
> git-mktree(1)
> Build a tree-object from ls-tree formatted text.
>
> git-pack-objects(1)
> Create a packed archive of objects.
>
> git-unpack-objects(1)
> Unpack objects from a packed archive.
>
> git-index-pack(1)
> Build pack index file for an existing packed archive.
>
> git-multi-pack-index(1)
> Write and verify multi-pack-indexes.
>
> Interrogation commands
> git-cat-file(1)
> Provide content or type and size information for repository
> objects.
>
> git-ls-tree(1)
> List the contents of a tree object.
>
> git-ls-files(1)
> Show information about files in the index and the working tree.
>
> git-diff-files(1)
> Compares files in the working tree and the index.
>
> git-name-rev(1)
> Find symbolic names for given revs.
>
> git-cherry(1)
> Find commits yet to be applied to upstream.
>
> git-var(1)
> Show a Git logical variable.
>
> git-rev-list(1)
> Lists commit objects in reverse chronological order.
>
> git-rev-parse(1)
> Pick out and massage parameters.
>
> git-for-each-ref(1)
> Output information on each ref.
>
> git-show-ref(1)
> List references in a local repository.
>
> git-ls-remote(1)
> List references in a remote repository.
>
> git-diff-tree(1)
> Compares the content and mode of blobs found via two tree objects.
>
> git-diff-index(1)
> Compare a tree to the working tree or index.
>
> git-merge-base(1)
> Find as good common ancestors as possible for a merge.
>
> git-verify-pack(1)
> Validate packed Git archive files.
>
> git-pack-redundant(1)
> Find redundant pack files.
>
> git-unpack-file(1)
> Creates a temporary file with a blob's contents.
>
> git-show-index(1)
> Show packed archive index.
>
> git-get-tar-commit-id(1)
> Extract commit ID from an archive created using git-archive.
>
> In general, the interrogate commands do not touch the files in the
> working tree.
>
> Synching repositories
> git-daemon(1)
> A really simple server for Git repositories.
>
> git-http-backend(1)
> Server side implementation of Git over HTTP.
>
> git-update-server-info(1)
> Update auxiliary info file to help dumb servers.
>
> git-send-pack(1)
> Push objects over Git protocol to another repository.
>
> git-fetch-pack(1)
> Receive missing objects from another repository.
>
> The following are helper commands used by the above; end users
> typically do not use them directly.
>
> git-shell(1)
> Restricted login shell for Git-only SSH access.
>
> git-parse-remote(1)
> Routines to help parsing remote repository access parameters.
>
> git-receive-pack(1)
> Receive what is pushed into the repository.
>
> git-upload-pack(1)
> Send objects packed back to git-fetch-pack.
>
> git-upload-archive(1)
> Send archive back to git-archive.
>
> git-http-fetch(1)
> Download from a remote Git repository via HTTP.
>
> git-http-push(1)
> Push objects over HTTP/DAV to another repository.
>
> Internal helper commands
> These are internal helper commands used by other commands; end users
> typically do not use them directly.
>
> git-merge-one-file(1)
> The standard helper program to use with git-merge-index.
>
> git-sh-setup(1)
> Common Git shell script setup code.
>
> git-check-ref-format(1)
> Ensures that a reference name is well formed.
>
> git-check-ignore(1)
> Debug gitignore / exclude files.
>
> git-check-attr(1)
> Display gitattributes information.
>
> git-credential(1)
> Retrieve and store user credentials.
>
> git-credential-cache(1)
> Helper to temporarily store passwords in memory.
>
> git-credential-store(1)
> Helper to store credentials on disk.
>
> git-fmt-merge-msg(1)
> Produce a merge commit message.
>
> git-check-mailmap(1)
> Show canonical names and email addresses of contacts.
>
> git-mailsplit(1)
> Simple UNIX mbox splitter program.
>
> git-mailinfo(1)
> Extracts patch and authorship from a single e-mail message.
>
> git-interpret-trailers(1)
> add or parse structured information in commit messages.
>
> git-column(1)
> Display data in columns.
>
> git-stripspace(1)
> Remove unnecessary whitespace.
>
> git-patch-id(1)
> Compute unique ID for a patch.
>
> git-sh-i18n(1)
> Git's i18n setup code for shell scripts.
>
>CONFIGURATION MECHANISM
> Git uses a simple text format to store customizations that are per
> repository and are per user. Such a configuration file may look like
> this:
>
> #
> # A '#' or ';' character indicates a comment.
> #
>
> ; core variables
> [core]
> ; Don't trust file modes
> filemode = false
>
> ; user identity
> [user]
> name = "Junio C Hamano"
> email = "gitster@pobox.com"
>
> Various commands read from the configuration file and adjust their
> operation accordingly. See git-config(1) for a list and more details
> about the configuration mechanism.
>
>IDENTIFIER TERMINOLOGY
> <object>
> Indicates the object name for any type of object.
>
> <blob>
> Indicates a blob object name.
>
> <tree>
> Indicates a tree object name.
>
> <commit>
> Indicates a commit object name.
>
> <tree-ish>
> Indicates a tree, commit or tag object name. A command that takes a
> <tree-ish> argument ultimately wants to operate on a <tree> object
> but automatically dereferences <commit> and <tag> objects that
> point at a <tree>.
>
> <commit-ish>
> Indicates a commit or tag object name. A command that takes a
> <commit-ish> argument ultimately wants to operate on a <commit>
> object but automatically dereferences <tag> objects that point at a
> <commit>.
>
> <type>
> Indicates that an object type is required. Currently one of: blob,
> tree, commit, or tag.
>
> <file>
> Indicates a filename - almost always relative to the root of the
> tree structure GIT_INDEX_FILE describes.
>
>SYMBOLIC IDENTIFIERS
> Any Git command accepting any <object> can also use the following
> symbolic notation:
>
> HEAD
> indicates the head of the current branch.
>
> <tag>
> a valid tag name (i.e. a refs/tags/<tag> reference).
>
> <head>
> a valid head name (i.e. a refs/heads/<head> reference).
>
> For a more complete list of ways to spell object names, see "SPECIFYING
> REVISIONS" section in gitrevisions(7).
>
>FILE/DIRECTORY STRUCTURE
> Please see the gitrepository-layout(5) document.
>
> Read githooks(5) for more details about each hook.
>
> Higher level SCMs may provide and manage additional information in the
> $GIT_DIR.
>
>TERMINOLOGY
> Please see gitglossary(7).
>
>ENVIRONMENT VARIABLES
> Various Git commands use the following environment variables:
>
> The Git Repository
> These environment variables apply to all core Git commands. Nb: it is
> worth noting that they may be used/overridden by SCMS sitting above Git
> so take care if using a foreign front-end.
>
> GIT_INDEX_FILE
> This environment allows the specification of an alternate index
> file. If not specified, the default of $GIT_DIR/index is used.
>
> GIT_INDEX_VERSION
> This environment variable allows the specification of an index
> version for new repositories. It won't affect existing index files.
> By default index file version 2 or 3 is used. See git-update-
> index(1) for more information.
>
> GIT_OBJECT_DIRECTORY
> If the object storage directory is specified via this environment
> variable then the sha1 directories are created underneath -
> otherwise the default $GIT_DIR/objects directory is used.
>
> GIT_ALTERNATE_OBJECT_DIRECTORIES
> Due to the immutable nature of Git objects, old objects can be
> archived into shared, read-only directories. This variable
> specifies a ":" separated (on Windows ";" separated) list of Git
> object directories which can be used to search for Git objects. New
> objects will not be written to these directories.
>
> Entries that begin with " (double-quote) will be interpreted as
> C-style quoted paths, removing leading and trailing double-quotes
> and respecting backslash escapes. E.g., the value
> "path-with-\"-and-:-in-it":vanilla-path has two paths:
> path-with-"-and-:-in-it and vanilla-path.
>
> GIT_DIR
> If the GIT_DIR environment variable is set then it specifies a path
> to use instead of the default .git for the base of the repository.
> The --git-dir command-line option also sets this value.
>
> GIT_WORK_TREE
> Set the path to the root of the working tree. This can also be
> controlled by the --work-tree command-line option and the
> core.worktree configuration variable.
>
> GIT_NAMESPACE
> Set the Git namespace; see gitnamespaces(7) for details. The
> --namespace command-line option also sets this value.
>
> GIT_CEILING_DIRECTORIES
> This should be a colon-separated list of absolute paths. If set, it
> is a list of directories that Git should not chdir up into while
> looking for a repository directory (useful for excluding
> slow-loading network directories). It will not exclude the current
> working directory or a GIT_DIR set on the command line or in the
> environment. Normally, Git has to read the entries in this list and
> resolve any symlink that might be present in order to compare them
> with the current directory. However, if even this access is slow,
> you can add an empty entry to the list to tell Git that the
> subsequent entries are not symlinks and needn't be resolved; e.g.,
> GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink.
>
> GIT_DISCOVERY_ACROSS_FILESYSTEM
> When run in a directory that does not have ".git" repository
> directory, Git tries to find such a directory in the parent
> directories to find the top of the working tree, but by default it
> does not cross filesystem boundaries. This environment variable can
> be set to true to tell Git not to stop at filesystem boundaries.
> Like GIT_CEILING_DIRECTORIES, this will not affect an explicit
> repository directory set via GIT_DIR or on the command line.
>
> GIT_COMMON_DIR
> If this variable is set to a path, non-worktree files that are
> normally in $GIT_DIR will be taken from this path instead.
> Worktree-specific files such as HEAD or index are taken from
> $GIT_DIR. See gitrepository-layout(5) and git-worktree(1) for
> details. This variable has lower precedence than other path
> variables such as GIT_INDEX_FILE, GIT_OBJECT_DIRECTORY...
>
> Git Commits
> GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME,
> GIT_COMMITTER_EMAIL, GIT_COMMITTER_DATE, EMAIL
> see git-commit-tree(1)
>
> Git Diffs
> GIT_DIFF_OPTS
> Only valid setting is "--unified=??" or "-u??" to set the number of
> context lines shown when a unified diff is created. This takes
> precedence over any "-U" or "--unified" option value passed on the
> Git diff command line.
>
> GIT_EXTERNAL_DIFF
> When the environment variable GIT_EXTERNAL_DIFF is set, the program
> named by it is called, instead of the diff invocation described
> above. For a path that is added, removed, or modified,
> GIT_EXTERNAL_DIFF is called with 7 parameters:
>
> path old-file old-hex old-mode new-file new-hex new-mode
>
> where:
>
> <old|new>-file
> are files GIT_EXTERNAL_DIFF can use to read the contents of
> <old|new>,
>
> <old|new>-hex
> are the 40-hexdigit SHA-1 hashes,
>
> <old|new>-mode
> are the octal representation of the file modes.
>
> The file parameters can point at the user's working file (e.g.
> new-file in "git-diff-files"), /dev/null (e.g. old-file when a new
> file is added), or a temporary file (e.g. old-file in the index).
> GIT_EXTERNAL_DIFF should not worry about unlinking the temporary
> file --- it is removed when GIT_EXTERNAL_DIFF exits.
>
> For a path that is unmerged, GIT_EXTERNAL_DIFF is called with 1
> parameter, <path>.
>
> For each path GIT_EXTERNAL_DIFF is called, two environment
> variables, GIT_DIFF_PATH_COUNTER and GIT_DIFF_PATH_TOTAL are set.
>
> GIT_DIFF_PATH_COUNTER
> A 1-based counter incremented by one for every path.
>
> GIT_DIFF_PATH_TOTAL
> The total number of paths.
>
> other
> GIT_MERGE_VERBOSITY
> A number controlling the amount of output shown by the recursive
> merge strategy. Overrides merge.verbosity. See git-merge(1)
>
> GIT_PAGER
> This environment variable overrides $PAGER. If it is set to an
> empty string or to the value "cat", Git will not launch a pager.
> See also the core.pager option in git-config(1).
>
> GIT_EDITOR
> This environment variable overrides $EDITOR and $VISUAL. It is used
> by several Git commands when, on interactive mode, an editor is to
> be launched. See also git-var(1) and the core.editor option in git-
> config(1).
>
> GIT_SSH, GIT_SSH_COMMAND
> If either of these environment variables is set then git fetch and
> git push will use the specified command instead of ssh when they
> need to connect to a remote system. The command-line parameters
> passed to the configured command are determined by the ssh variant.
> See ssh.variant option in git-config(1) for details.
>
> + $GIT_SSH_COMMAND takes precedence over $GIT_SSH, and is interpreted
> by the shell, which allows additional arguments to be included.
> $GIT_SSH on the other hand must be just the path to a program (which
> can be a wrapper shell script, if additional arguments are needed).
>
> + Usually it is easier to configure any desired options through your
> personal .ssh/config file. Please consult your ssh documentation for
> further details.
>
> GIT_SSH_VARIANT
> If this environment variable is set, it overrides Git's
> autodetection whether GIT_SSH/GIT_SSH_COMMAND/core.sshCommand refer
> to OpenSSH, plink or tortoiseplink. This variable overrides the
> config setting ssh.variant that serves the same purpose.
>
> GIT_ASKPASS
> If this environment variable is set, then Git commands which need
> to acquire passwords or passphrases (e.g. for HTTP or IMAP
> authentication) will call this program with a suitable prompt as
> command-line argument and read the password from its STDOUT. See
> also the core.askPass option in git-config(1).
>
> GIT_TERMINAL_PROMPT
> If this environment variable is set to 0, git will not prompt on
> the terminal (e.g., when asking for HTTP authentication).
>
> GIT_CONFIG_NOSYSTEM
> Whether to skip reading settings from the system-wide
> $(prefix)/etc/gitconfig file. This environment variable can be used
> along with $HOME and $XDG_CONFIG_HOME to create a predictable
> environment for a picky script, or you can set it temporarily to
> avoid using a buggy /etc/gitconfig file while waiting for someone
> with sufficient permissions to fix it.
>
> GIT_FLUSH
> If this environment variable is set to "1", then commands such as
> git blame (in incremental mode), git rev-list, git log, git
> check-attr and git check-ignore will force a flush of the output
> stream after each record have been flushed. If this variable is set
> to "0", the output of these commands will be done using completely
> buffered I/O. If this environment variable is not set, Git will
> choose buffered or record-oriented flushing based on whether stdout
> appears to be redirected to a file or not.
>
> GIT_TRACE
> Enables general trace messages, e.g. alias expansion, built-in
> command execution and external command execution.
>
> If this variable is set to "1", "2" or "true" (comparison is case
> insensitive), trace messages will be printed to stderr.
>
> If the variable is set to an integer value greater than 2 and lower
> than 10 (strictly) then Git will interpret this value as an open
> file descriptor and will try to write the trace messages into this
> file descriptor.
>
> Alternatively, if the variable is set to an absolute path (starting
> with a / character), Git will interpret this as a file path and
> will try to append the trace messages to it.
>
> Unsetting the variable, or setting it to empty, "0" or "false"
> (case insensitive) disables trace messages.
>
> GIT_TRACE_FSMONITOR
> Enables trace messages for the filesystem monitor extension. See
> GIT_TRACE for available trace output options.
>
> GIT_TRACE_PACK_ACCESS
> Enables trace messages for all accesses to any packs. For each
> access, the pack file name and an offset in the pack is recorded.
> This may be helpful for troubleshooting some pack-related
> performance problems. See GIT_TRACE for available trace output
> options.
>
> GIT_TRACE_PACKET
> Enables trace messages for all packets coming in or out of a given
> program. This can help with debugging object negotiation or other
> protocol issues. Tracing is turned off at a packet starting with
> "PACK" (but see GIT_TRACE_PACKFILE below). See GIT_TRACE for
> available trace output options.
>
> GIT_TRACE_PACKFILE
> Enables tracing of packfiles sent or received by a given program.
> Unlike other trace output, this trace is verbatim: no headers, and
> no quoting of binary data. You almost certainly want to direct into
> a file (e.g., GIT_TRACE_PACKFILE=/tmp/my.pack) rather than
> displaying it on the terminal or mixing it with other trace output.
>
> Note that this is currently only implemented for the client side of
> clones and fetches.
>
> GIT_TRACE_PERFORMANCE
> Enables performance related trace messages, e.g. total execution
> time of each Git command. See GIT_TRACE for available trace output
> options.
>
> GIT_TRACE_SETUP
> Enables trace messages printing the .git, working tree and current
> working directory after Git has completed its setup phase. See
> GIT_TRACE for available trace output options.
>
> GIT_TRACE_SHALLOW
> Enables trace messages that can help debugging fetching / cloning
> of shallow repositories. See GIT_TRACE for available trace output
> options.
>
> GIT_TRACE_CURL
> Enables a curl full trace dump of all incoming and outgoing data,
> including descriptive information, of the git transport protocol.
> This is similar to doing curl --trace-ascii on the command line.
> This option overrides setting the GIT_CURL_VERBOSE environment
> variable. See GIT_TRACE for available trace output options.
>
> GIT_TRACE_CURL_NO_DATA
> When a curl trace is enabled (see GIT_TRACE_CURL above), do not
> dump data (that is, only dump info lines and headers).
>
> GIT_REDACT_COOKIES
> This can be set to a comma-separated list of strings. When a curl
> trace is enabled (see GIT_TRACE_CURL above), whenever a "Cookies:"
> header sent by the client is dumped, values of cookies whose key is
> in that list (case-sensitive) are redacted.
>
> GIT_LITERAL_PATHSPECS
> Setting this variable to 1 will cause Git to treat all pathspecs
> literally, rather than as glob patterns. For example, running
> GIT_LITERAL_PATHSPECS=1 git log -- '*.c' will search for commits
> that touch the path *.c, not any paths that the glob *.c matches.
> You might want this if you are feeding literal paths to Git (e.g.,
> paths previously given to you by git ls-tree, --raw diff output,
> etc).
>
> GIT_GLOB_PATHSPECS
> Setting this variable to 1 will cause Git to treat all pathspecs as
> glob patterns (aka "glob" magic).
>
> GIT_NOGLOB_PATHSPECS
> Setting this variable to 1 will cause Git to treat all pathspecs as
> literal (aka "literal" magic).
>
> GIT_ICASE_PATHSPECS
> Setting this variable to 1 will cause Git to treat all pathspecs as
> case-insensitive.
>
> GIT_REFLOG_ACTION
> When a ref is updated, reflog entries are created to keep track of
> the reason why the ref was updated (which is typically the name of
> the high-level command that updated the ref), in addition to the
> old and new values of the ref. A scripted Porcelain command can use
> set_reflog_action helper function in git-sh-setup to set its name
> to this variable when it is invoked as the top level command by the
> end user, to be recorded in the body of the reflog.
>
> GIT_REF_PARANOIA
> If set to 1, include broken or badly named refs when iterating over
> lists of refs. In a normal, non-corrupted repository, this does
> nothing. However, enabling it may help git to detect and abort some
> operations in the presence of broken refs. Git sets this variable
> automatically when performing destructive operations like git-
> prune(1). You should not need to set it yourself unless you want to
> be paranoid about making sure an operation has touched every ref
> (e.g., because you are cloning a repository to make a backup).
>
> GIT_ALLOW_PROTOCOL
> If set to a colon-separated list of protocols, behave as if
> protocol.allow is set to never, and each of the listed protocols
> has protocol.<name>.allow set to always (overriding any existing
> configuration). In other words, any protocol not mentioned will be
> disallowed (i.e., this is a whitelist, not a blacklist). See the
> description of protocol.allow in git-config(1) for more details.
>
> GIT_PROTOCOL_FROM_USER
> Set to 0 to prevent protocols used by fetch/push/clone which are
> configured to the user state. This is useful to restrict recursive
> submodule initialization from an untrusted repository or for
> programs which feed potentially-untrusted URLS to git commands. See
> git-config(1) for more details.
>
> GIT_PROTOCOL
> For internal use only. Used in handshaking the wire protocol.
> Contains a colon : separated list of keys with optional values
> key[=value]. Presence of unknown keys and values must be ignored.
>
> GIT_OPTIONAL_LOCKS
> If set to 0, Git will complete any requested operation without
> performing any optional sub-operations that require taking a lock.
> For example, this will prevent git status from refreshing the index
> as a side effect. This is useful for processes running in the
> background which do not want to cause lock contention with other
> operations on the repository. Defaults to 1.
>
> GIT_REDIRECT_STDIN, GIT_REDIRECT_STDOUT, GIT_REDIRECT_STDERR
> Windows-only: allow redirecting the standard input/output/error
> handles to paths specified by the environment variables. This is
> particularly useful in multi-threaded applications where the
> canonical way to pass standard handles via CreateProcess() is not
> an option because it would require the handles to be marked
> inheritable (and consequently every spawned process would inherit
> them, possibly blocking regular Git operations). The primary
> intended use case is to use named pipes for communication (e.g.
> \\.\pipe\my-git-stdin-123).
>
> Two special values are supported: off will simply close the
> corresponding standard handle, and if GIT_REDIRECT_STDERR is 2>&1,
> standard error will be redirected to the same handle as standard
> output.
>
> GIT_PRINT_SHA1_ELLIPSIS (deprecated)
> If set to yes, print an ellipsis following an (abbreviated) SHA-1
> value. This affects indications of detached HEADs (git-checkout(1))
> and the raw diff output (git-diff(1)). Printing an ellipsis in the
> cases mentioned is no longer considered adequate and support for it
> is likely to be removed in the foreseeable future (along with the
> variable).
>
>DISCUSSION
> More detail on the following is available from the Git concepts chapter
> of the user-manual[2] and gitcore-tutorial(7).
>
> A Git project normally consists of a working directory with a ".git"
> subdirectory at the top level. The .git directory contains, among other
> things, a compressed object database representing the complete history
> of the project, an "index" file which links that history to the current
> contents of the working tree, and named pointers into that history such
> as tags and branch heads.
>
> The object database contains objects of three main types: blobs, which
> hold file data; trees, which point to blobs and other trees to build up
> directory hierarchies; and commits, which each reference a single tree
> and some number of parent commits.
>
> The commit, equivalent to what other systems call a "changeset" or
> "version", represents a step in the project's history, and each parent
> represents an immediately preceding step. Commits with more than one
> parent represent merges of independent lines of development.
>
> All objects are named by the SHA-1 hash of their contents, normally
> written as a string of 40 hex digits. Such names are globally unique.
> The entire history leading up to a commit can be vouched for by signing
> just that commit. A fourth object type, the tag, is provided for this
> purpose.
>
> When first created, objects are stored in individual files, but for
> efficiency may later be compressed together into "pack files".
>
> Named pointers called refs mark interesting points in history. A ref
> may contain the SHA-1 name of an object or the name of another ref.
> Refs with names beginning ref/head/ contain the SHA-1 name of the most
> recent commit (or "head") of a branch under development. SHA-1 names of
> tags of interest are stored under ref/tags/. A special ref named HEAD
> contains the name of the currently checked-out branch.
>
> The index file is initialized with a list of all paths and, for each
> path, a blob object and a set of attributes. The blob object represents
> the contents of the file as of the head of the current branch. The
> attributes (last modified time, size, etc.) are taken from the
> corresponding file in the working tree. Subsequent changes to the
> working tree can be found by comparing these attributes. The index may
> be updated with new content, and new commits may be created from the
> content stored in the index.
>
> The index is also capable of storing multiple entries (called "stages")
> for a given pathname. These stages are used to hold the various
> unmerged version of a file when a merge is in progress.
>
>FURTHER DOCUMENTATION
> See the references in the "description" section to get started using
> Git. The following is probably more detail than necessary for a
> first-time user.
>
> The Git concepts chapter of the user-manual[2] and gitcore-tutorial(7)
> both provide introductions to the underlying Git architecture.
>
> See gitworkflows(7) for an overview of recommended workflows.
>
> See also the howto[3] documents for some useful examples.
>
> The internals are documented in the Git API documentation[4].
>
> Users migrating from CVS may also want to read gitcvs-migration(7).
>
>AUTHORS
> Git was started by Linus Torvalds, and is currently maintained by Junio
> C Hamano. Numerous contributions have come from the Git mailing list
> <git@vger.kernel.org[5]>.
> http://www.openhub.net/p/git/contributors/summary gives you a more
> complete list of contributors.
>
> If you have a clone of git.git itself, the output of git-shortlog(1)
> and git-blame(1) can show you the authors for specific parts of the
> project.
>
>REPORTING BUGS
> Report bugs to the Git mailing list <git@vger.kernel.org[5]> where the
> development and maintenance is primarily done. You do not have to be
> subscribed to the list to send a message there. See the list archive at
> https://public-inbox.org/git for previous bug reports and other
> discussions.
>
> Issues which are security relevant should be disclosed privately to the
> Git Security mailing list <git-security@googlegroups.com[6]>.
>
>SEE ALSO
> gittutorial(7), gittutorial-2(7), giteveryday(7), gitcvs-migration(7),
> gitglossary(7), gitcore-tutorial(7), gitcli(7), The Git User's
> Manual[1], gitworkflows(7)
>
>GIT
> Part of the git(1) suite
>
>NOTES
> 1. Git User's Manual
> file:///home/frederik/share/doc/git-doc/user-manual.html
>
> 2. Git concepts chapter of the user-manual
> file:///home/frederik/share/doc/git-doc/user-manual.html#git-concepts
>
> 3. howto
> file:///home/frederik/share/doc/git-doc/howto-index.html
>
> 4. Git API documentation
> file:///home/frederik/share/doc/git-doc/technical/api-index.html
>
> 5. git@vger.kernel.org
> mailto:git@vger.kernel.org
>
> 6. git-security@googlegroups.com
> mailto:git-security@googlegroups.com
>
>Git 2.21.0.rc1.9.g3f 02/18/2019 GIT(1)
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/1] de-alphabetize command list
2019-03-11 9:04 ` frederik
@ 2019-03-11 14:38 ` Jacob Keller
0 siblings, 0 replies; 17+ messages in thread
From: Jacob Keller @ 2019-03-11 14:38 UTC (permalink / raw)
To: frederik
Cc: Git mailing list, Junio C Hamano, Eric Sunshine, Jonathan Nieder,
Theodore Y. Ts'o
On Mon, Mar 11, 2019 at 2:09 AM <frederik@ofb.net> wrote:
>
> Hey Git people,
>
> I didn't get a reply and I'm not sure what the appropriate ping
> interval is, or when I should conclude that no one is interested.
>
> There seemed to be some vaguely positive feedback before I embarked on
> this project. At the same time I don't want to pester anyone into
> applying patches in a disorganized fashion.
>
> I'm not subscribed to the mailing list so I apologize if I'm out of
> tune with a release cycle or current development thrust.
>
> Thanks,
>
> Frederick
>
FWIW, I felt like the changes in your proposed patch were good. I
haven't had more time to dig into reviewing it much though :(
-Jake
> On Thu, Feb 21, 2019 at 10:05:22AM -0800, frederik@ofb.net wrote:
> >I realized that it would probably be easier to discuss this proposal
> >if I attached the final command listing and the rendered manual page.
> >Please find them attached to this message.
> >
> >Thank you,
> >
> >Frederick
> >
> >On Tue, Feb 19, 2019 at 09:54:12AM -0800, Frederick Eaton wrote:
> >>This is a follow-up to my proposal to de-alphabetize the command
> >>listings in the git(1) manual page, from 6 July 2018.
> >>
> >>Some projects have manual page items listed in alphabetical order,
> >>some don't. As I argued in my proposal, I find it easier to learn from
> >>material which is not alphabetized. If this patch is accepted, I hope
> >>that it will make the Git documentation more accessible to myself and
> >>others.
> >>
> >>I produced the reordered command list in this patch using several
> >>sources, as indicated by comments in the new command-list.txt file.
> >>First, all the commands in the main part of "gittutorial(7)" appear in
> >>order, then the commands in giteveryday(7). Then appear additional
> >>commands from a friend's shell history, in reverse order of frequency.
> >>Then gittutorial-2(7), then gitcore-tutorial(7). After that there is a
> >>list of "guides", followed by about 100 commands not appearing in the
> >>earlier lists. I kept the guides and the remaining commands in their
> >>category groupings (guide, mainporcelain, ancillarymanipulators,
> >>etc.), but ordered the commands within each category according to my
> >>own judgment after skimming each manual page.
> >>
> >>To verify that the new list is a permutation of the most recent list,
> >>I use the following command (it should produce no output and exit 0):
> >>
> >> diff <(git show master:command-list.txt | grep -v '^#' | sort ) <(cat command-list.txt | grep -v '^#' | sort)
> >>
> >>Note this patch changes the order of commands appearing in the
> >>generated file "command-list.h", which mostly seems to be used by
> >>"help.c". Probably due to the various occurrences of QSORT in
> >>"help.c", I think this reordering has no visible effect. I am willing
> >>to do any additional testing which may be recommended to ensure that
> >>this patch has no undesired consequences.
> >>
> >>Frederick Eaton (1):
> >> Prioritize list of commands appearing in git(1), via command-list.txt.
> >> Don't invoke 'sort' in Documentation/cmd-list.perl.
> >>
> >>Documentation/cmd-list.perl | 2 +-
> >>command-list.txt | 295 +++++++++++++++++++-----------------
> >>2 files changed, 158 insertions(+), 139 deletions(-)
> >>
> >>--
> >>2.20.1
> >>
>
> ># Command classification list
> ># ---------------------------
> ># All supported commands, builtin or external, must be described in
> ># here. This info is used to list commands in various places. Each
> ># command is on one line followed by one or more attributes.
> >#
> ># The first attribute group is mandatory and indicates the command
> ># type. This group includes:
> >#
> ># mainporcelain
> ># ancillarymanipulators
> ># ancillaryinterrogators
> ># foreignscminterface
> ># plumbingmanipulators
> ># plumbinginterrogators
> ># synchingrepositories
> ># synchelpers
> ># purehelpers
> >#
> ># The type names are self explanatory. But if you want to see what
> ># command belongs to what group to get a better picture, have a look
> ># at "git" man page, "GIT COMMANDS" section.
> >#
> ># Commands of type mainporcelain can also optionally have one of these
> ># attributes:
> >#
> ># init
> ># worktree
> ># info
> ># history
> ># remote
> >#
> ># These commands are considered "common" and will show up in "git
> ># help" output in groups. Uncommon porcelain commands must not
> ># specify any of these attributes.
> >#
> ># "complete" attribute is used to mark that the command should be
> ># completable by git-completion.bash. Note that by default,
> ># mainporcelain commands are completable so you don't need this
> ># attribute.
> >#
> ># As part of the Git man page list, the man(5/7) guides are also
> ># specified here, which can only have "guide" attribute and nothing
> ># else.
> >#
> ># February 2019: This list had been sorted alphabetically but has been
> ># reordered to make it easier for people to learn from the main git(1)
> ># manual page. The new ordering is according to approximate usefulness
> ># / frequency of use / order of use, with some grouping by topic. The
> ># idea is to make it possible to read the manual page from beginning
> ># to end and see the most important commands first, rather than
> ># getting them in alphabetical order - in other words, to make the
> ># manual page more like a table of contents and less like an index.
> ># Please consider this when adding new commands.
> >#
> >### command list (do not change this line, also do not change alignment)
> ># command name category [category] [category]
> ># From gittutorial
> >git-help ancillaryinterrogators complete
> >git-config ancillarymanipulators complete
> >git-clone mainporcelain init
> >git-init mainporcelain init
> >git-add mainporcelain worktree
> >git-commit mainporcelain history
> >git-diff mainporcelain history
> >git-status mainporcelain info
> >git-log mainporcelain info
> >git-branch mainporcelain history
> >git-checkout mainporcelain history
> >git-merge mainporcelain history
> >gitk mainporcelain
> >git-pull mainporcelain remote
> >git-fetch mainporcelain remote
> ># From tutorial NEXT STEPS
> >git-format-patch mainporcelain
> >git-bisect mainporcelain info
> >giteveryday guide
> >gitworkflows guide
> >gitcvs-migration guide
> ># From giteveryday
> >git-reset mainporcelain worktree
> >git-rebase mainporcelain history
> >git-tag mainporcelain history
> >git-push mainporcelain remote
> >git-send-email foreignscminterface complete
> >git-request-pull foreignscminterface complete
> >git-am mainporcelain
> >git-revert mainporcelain
> >git-daemon synchingrepositories
> >git-shell synchelpers
> >git-http-backend synchingrepositories
> >gitweb ancillaryinterrogators
> ># From user feedback
> >git-grep mainporcelain info
> >git-show mainporcelain info
> >git-submodule mainporcelain
> >git-cherry-pick mainporcelain
> >git-clean mainporcelain
> ># From gittutorial-2
> >git-cat-file plumbinginterrogators
> >git-ls-tree plumbinginterrogators
> >git-ls-files plumbinginterrogators
> >gitcore-tutorial guide
> >gitglossary guide
> ># From gitcore-tutorial
> >git-update-index plumbingmanipulators
> >git-diff-files plumbinginterrogators
> >git-write-tree plumbingmanipulators
> >git-read-tree plumbingmanipulators
> >git-checkout-index plumbingmanipulators
> >git-show-branch ancillaryinterrogators complete
> >git-name-rev plumbinginterrogators
> >git-merge-index plumbingmanipulators
> >git-repack ancillarymanipulators complete
> >git-prune-packed plumbingmanipulators
> >git-update-server-info synchingrepositories
> >git-prune ancillarymanipulators
> >git-cherry plumbinginterrogators complete
> ># Guides, reordered
> >gittutorial guide
> >gittutorial-2 guide
> >gitrevisions guide
> >gitignore guide
> >gitcli guide
> >gitrepository-layout guide
> >gitdiffcore guide
> >gitmodules guide
> >githooks guide
> >gitnamespaces guide
> >gitattributes guide
> ># All other commands, sorted by man page category and then by
> ># approximate priority
> >git-stash mainporcelain
> >git-rm mainporcelain worktree
> >git-mv mainporcelain worktree
> >git-gui mainporcelain
> >git-citool mainporcelain
> >git-archive mainporcelain
> >git-shortlog mainporcelain
> >git-describe mainporcelain
> >git-gc mainporcelain
> >git-notes mainporcelain
> >git-worktree mainporcelain
> >git-bundle mainporcelain
> >git-range-diff mainporcelain
> >git-stage complete
> >git-reflog ancillarymanipulators complete
> >git-remote ancillarymanipulators complete
> >git-mergetool ancillarymanipulators complete
> >git-filter-branch ancillarymanipulators
> >git-replace ancillarymanipulators complete
> >git-fast-export ancillarymanipulators
> >git-fast-import ancillarymanipulators
> >git-pack-refs ancillarymanipulators
> >git-cvsimport foreignscminterface
> >git-cvsserver foreignscminterface
> >git-cvsexportcommit foreignscminterface
> >git-svn foreignscminterface
> >git-p4 foreignscminterface
> >git-quiltimport foreignscminterface
> >git-archimport foreignscminterface
> >git-imap-send foreignscminterface
> >git-apply plumbingmanipulators complete
> >git-merge-file plumbingmanipulators
> >git-mktag plumbingmanipulators
> >git-hash-object plumbingmanipulators
> >git-update-ref plumbingmanipulators
> >git-symbolic-ref plumbingmanipulators
> >git-commit-tree plumbingmanipulators
> >git-commit-graph plumbingmanipulators
> >git-mktree plumbingmanipulators
> >git-pack-objects plumbingmanipulators
> >git-unpack-objects plumbingmanipulators
> >git-index-pack plumbingmanipulators
> >git-multi-pack-index plumbingmanipulators
> >git-blame ancillaryinterrogators complete
> >git-annotate ancillaryinterrogators
> >git-instaweb ancillaryinterrogators complete
> >git-rerere ancillaryinterrogators
> >git-fsck ancillaryinterrogators complete
> >git-whatchanged ancillaryinterrogators complete
> >git-difftool ancillaryinterrogators complete
> >git-merge-tree ancillaryinterrogators
> >git-count-objects ancillaryinterrogators
> >git-verify-commit ancillaryinterrogators
> >git-verify-tag ancillaryinterrogators
> >git-send-pack synchingrepositories
> >git-fetch-pack synchingrepositories
> >git-parse-remote synchelpers
> >git-receive-pack synchelpers
> >git-upload-pack synchelpers
> >git-upload-archive synchelpers
> >git-http-fetch synchelpers
> >git-http-push synchelpers
> >git-var plumbinginterrogators
> >git-rev-list plumbinginterrogators
> >git-rev-parse plumbinginterrogators
> >git-for-each-ref plumbinginterrogators
> >git-show-ref plumbinginterrogators
> >git-ls-remote plumbinginterrogators
> >git-diff-tree plumbinginterrogators
> >git-diff-index plumbinginterrogators
> >git-merge-base plumbinginterrogators
> >git-verify-pack plumbinginterrogators
> >git-pack-redundant plumbinginterrogators
> >git-unpack-file plumbinginterrogators
> >git-show-index plumbinginterrogators
> >git-get-tar-commit-id plumbinginterrogators
> >git-merge-one-file purehelpers
> >git-sh-setup purehelpers
> >git-check-ref-format purehelpers
> >git-check-ignore purehelpers
> >git-check-attr purehelpers
> >git-credential purehelpers
> >git-credential-cache purehelpers
> >git-credential-store purehelpers
> >git-fmt-merge-msg purehelpers
> >git-check-mailmap purehelpers
> >git-mailsplit purehelpers
> >git-mailinfo purehelpers
> >git-interpret-trailers purehelpers
> >git-column purehelpers
> >git-stripspace purehelpers
> >git-patch-id purehelpers
> >git-sh-i18n purehelpers
>
> >GIT(1) Git Manual GIT(1)
> >
> >NAME
> > git - the stupid content tracker
> >
> >SYNOPSIS
> > git [--version] [--help] [-C <path>] [-c <name>=<value>]
> > [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path]
> > [-p|--paginate|-P|--no-pager] [--no-replace-objects] [--bare]
> > [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>]
> > [--super-prefix=<path>]
> > <command> [<args>]
> >
> >DESCRIPTION
> > Git is a fast, scalable, distributed revision control system with an
> > unusually rich command set that provides both high-level operations and
> > full access to internals.
> >
> > See gittutorial(7) to get started, then see giteveryday(7) for a useful
> > minimum set of commands. The Git User's Manual[1] has a more in-depth
> > introduction.
> >
> > After you mastered the basic concepts, you can come back to this page
> > to learn what commands Git offers. You can learn more about individual
> > Git commands with "git help command". gitcli(7) manual page gives you
> > an overview of the command-line command syntax.
> >
> > A formatted and hyperlinked copy of the latest Git documentation can be
> > viewed at https://git.github.io/htmldocs/git.html.
> >
> >OPTIONS
> > --version
> > Prints the Git suite version that the git program came from.
> >
> > --help
> > Prints the synopsis and a list of the most commonly used commands.
> > If the option --all or -a is given then all available commands are
> > printed. If a Git command is named this option will bring up the
> > manual page for that command.
> >
> > Other options are available to control how the manual page is
> > displayed. See git-help(1) for more information, because git --help
> > ... is converted internally into git help ....
> >
> > -C <path>
> > Run as if git was started in <path> instead of the current working
> > directory. When multiple -C options are given, each subsequent
> > non-absolute -C <path> is interpreted relative to the preceding -C
> > <path>.
> >
> > This option affects options that expect path name like --git-dir
> > and --work-tree in that their interpretations of the path names
> > would be made relative to the working directory caused by the -C
> > option. For example the following invocations are equivalent:
> >
> > git --git-dir=a.git --work-tree=b -C c status
> > git --git-dir=c/a.git --work-tree=c/b status
> >
> > -c <name>=<value>
> > Pass a configuration parameter to the command. The value given will
> > override values from configuration files. The <name> is expected in
> > the same format as listed by git config (subkeys separated by
> > dots).
> >
> > Note that omitting the = in git -c foo.bar ... is allowed and sets
> > foo.bar to the boolean true value (just like [foo]bar would in a
> > config file). Including the equals but with an empty value (like
> > git -c foo.bar= ...) sets foo.bar to the empty string which git
> > config --type=bool will convert to false.
> >
> > --exec-path[=<path>]
> > Path to wherever your core Git programs are installed. This can
> > also be controlled by setting the GIT_EXEC_PATH environment
> > variable. If no path is given, git will print the current setting
> > and then exit.
> >
> > --html-path
> > Print the path, without trailing slash, where Git's HTML
> > documentation is installed and exit.
> >
> > --man-path
> > Print the manpath (see man(1)) for the man pages for this version
> > of Git and exit.
> >
> > --info-path
> > Print the path where the Info files documenting this version of Git
> > are installed and exit.
> >
> > -p, --paginate
> > Pipe all output into less (or if set, $PAGER) if standard output is
> > a terminal. This overrides the pager.<cmd> configuration options
> > (see the "Configuration Mechanism" section below).
> >
> > -P, --no-pager
> > Do not pipe Git output into a pager.
> >
> > --git-dir=<path>
> > Set the path to the repository. This can also be controlled by
> > setting the GIT_DIR environment variable. It can be an absolute
> > path or relative path to current working directory.
> >
> > --work-tree=<path>
> > Set the path to the working tree. It can be an absolute path or a
> > path relative to the current working directory. This can also be
> > controlled by setting the GIT_WORK_TREE environment variable and
> > the core.worktree configuration variable (see core.worktree in git-
> > config(1) for a more detailed discussion).
> >
> > --namespace=<path>
> > Set the Git namespace. See gitnamespaces(7) for more details.
> > Equivalent to setting the GIT_NAMESPACE environment variable.
> >
> > --super-prefix=<path>
> > Currently for internal use only. Set a prefix which gives a path
> > from above a repository down to its root. One use is to give
> > submodules context about the superproject that invoked it.
> >
> > --bare
> > Treat the repository as a bare repository. If GIT_DIR environment
> > is not set, it is set to the current working directory.
> >
> > --no-replace-objects
> > Do not use replacement refs to replace Git objects. See git-
> > replace(1) for more information.
> >
> > --literal-pathspecs
> > Treat pathspecs literally (i.e. no globbing, no pathspec magic).
> > This is equivalent to setting the GIT_LITERAL_PATHSPECS environment
> > variable to 1.
> >
> > --glob-pathspecs
> > Add "glob" magic to all pathspec. This is equivalent to setting the
> > GIT_GLOB_PATHSPECS environment variable to 1. Disabling globbing on
> > individual pathspecs can be done using pathspec magic ":(literal)"
> >
> > --noglob-pathspecs
> > Add "literal" magic to all pathspec. This is equivalent to setting
> > the GIT_NOGLOB_PATHSPECS environment variable to 1. Enabling
> > globbing on individual pathspecs can be done using pathspec magic
> > ":(glob)"
> >
> > --icase-pathspecs
> > Add "icase" magic to all pathspec. This is equivalent to setting
> > the GIT_ICASE_PATHSPECS environment variable to 1.
> >
> > --no-optional-locks
> > Do not perform optional operations that require locks. This is
> > equivalent to setting the GIT_OPTIONAL_LOCKS to 0.
> >
> > --list-cmds=group[,group...]
> > List commands by group. This is an internal/experimental option and
> > may change or be removed in the future. Supported groups are:
> > builtins, parseopt (builtin commands that use parse-options), main
> > (all commands in libexec directory), others (all other commands in
> > $PATH that have git- prefix), list-<category> (see categories in
> > command-list.txt), nohelpers (exclude helper commands), alias and
> > config (retrieve command list from config variable
> > completion.commands)
> >
> >GIT COMMANDS
> > We divide Git into high level ("porcelain") commands and low level
> > ("plumbing") commands.
> >
> >HIGH-LEVEL COMMANDS (PORCELAIN)
> > We separate the porcelain commands into the main commands and some
> > ancillary user utilities.
> >
> > Main porcelain commands
> > git-clone(1)
> > Clone a repository into a new directory.
> >
> > git-init(1)
> > Create an empty Git repository or reinitialize an existing one.
> >
> > git-add(1)
> > Add file contents to the index.
> >
> > git-commit(1)
> > Record changes to the repository.
> >
> > git-diff(1)
> > Show changes between commits, commit and working tree, etc.
> >
> > git-status(1)
> > Show the working tree status.
> >
> > git-log(1)
> > Show commit logs.
> >
> > git-branch(1)
> > List, create, or delete branches.
> >
> > git-checkout(1)
> > Switch branches or restore working tree files.
> >
> > git-merge(1)
> > Join two or more development histories together.
> >
> > gitk(1)
> > The Git repository browser.
> >
> > git-pull(1)
> > Fetch from and integrate with another repository or a local branch.
> >
> > git-fetch(1)
> > Download objects and refs from another repository.
> >
> > git-format-patch(1)
> > Prepare patches for e-mail submission.
> >
> > git-bisect(1)
> > Use binary search to find the commit that introduced a bug.
> >
> > git-reset(1)
> > Reset current HEAD to the specified state.
> >
> > git-rebase(1)
> > Reapply commits on top of another base tip.
> >
> > git-tag(1)
> > Create, list, delete or verify a tag object signed with GPG.
> >
> > git-push(1)
> > Update remote refs along with associated objects.
> >
> > git-am(1)
> > Apply a series of patches from a mailbox.
> >
> > git-revert(1)
> > Revert some existing commits.
> >
> > git-grep(1)
> > Print lines matching a pattern.
> >
> > git-show(1)
> > Show various types of objects.
> >
> > git-submodule(1)
> > Initialize, update or inspect submodules.
> >
> > git-cherry-pick(1)
> > Apply the changes introduced by some existing commits.
> >
> > git-clean(1)
> > Remove untracked files from the working tree.
> >
> > git-stash(1)
> > Stash the changes in a dirty working directory away.
> >
> > git-rm(1)
> > Remove files from the working tree and from the index.
> >
> > git-mv(1)
> > Move or rename a file, a directory, or a symlink.
> >
> > git-gui(1)
> > A portable graphical interface to Git.
> >
> > git-citool(1)
> > Graphical alternative to git-commit.
> >
> > git-archive(1)
> > Create an archive of files from a named tree.
> >
> > git-shortlog(1)
> > Summarize git log output.
> >
> > git-describe(1)
> > Give an object a human readable name based on an available ref.
> >
> > git-gc(1)
> > Cleanup unnecessary files and optimize the local repository.
> >
> > git-notes(1)
> > Add or inspect object notes.
> >
> > git-worktree(1)
> > Manage multiple working trees.
> >
> > git-bundle(1)
> > Move objects and refs by archive.
> >
> > git-range-diff(1)
> > Compare two commit ranges (e.g. two versions of a branch).
> >
> > Ancillary Commands
> > Manipulators:
> >
> > git-config(1)
> > Get and set repository or global options.
> >
> > git-repack(1)
> > Pack unpacked objects in a repository.
> >
> > git-prune(1)
> > Prune all unreachable objects from the object database.
> >
> > git-reflog(1)
> > Manage reflog information.
> >
> > git-remote(1)
> > Manage set of tracked repositories.
> >
> > git-mergetool(1)
> > Run merge conflict resolution tools to resolve merge conflicts.
> >
> > git-filter-branch(1)
> > Rewrite branches.
> >
> > git-replace(1)
> > Create, list, delete refs to replace objects.
> >
> > git-fast-export(1)
> > Git data exporter.
> >
> > git-fast-import(1)
> > Backend for fast Git data importers.
> >
> > git-pack-refs(1)
> > Pack heads and tags for efficient repository access.
> >
> > Interrogators:
> >
> > git-help(1)
> > Display help information about Git.
> >
> > gitweb(1)
> > Git web interface (web frontend to Git repositories).
> >
> > git-show-branch(1)
> > Show branches and their commits.
> >
> > git-blame(1)
> > Show what revision and author last modified each line of a file.
> >
> > git-annotate(1)
> > Annotate file lines with commit information.
> >
> > git-instaweb(1)
> > Instantly browse your working repository in gitweb.
> >
> > git-rerere(1)
> > Reuse recorded resolution of conflicted merges.
> >
> > git-fsck(1)
> > Verifies the connectivity and validity of the objects in the
> > database.
> >
> > git-whatchanged(1)
> > Show logs with difference each commit introduces.
> >
> > git-difftool(1)
> > Show changes using common diff tools.
> >
> > git-merge-tree(1)
> > Show three-way merge without touching index.
> >
> > git-count-objects(1)
> > Count unpacked number of objects and their disk consumption.
> >
> > git-verify-commit(1)
> > Check the GPG signature of commits.
> >
> > git-verify-tag(1)
> > Check the GPG signature of tags.
> >
> > Interacting with Others
> > These commands are to interact with foreign SCM and with other people
> > via patch over e-mail.
> >
> > git-send-email(1)
> > Send a collection of patches as emails.
> >
> > git-request-pull(1)
> > Generates a summary of pending changes.
> >
> > git-cvsimport(1)
> > Salvage your data out of another SCM people love to hate.
> >
> > git-cvsserver(1)
> > A CVS server emulator for Git.
> >
> > git-cvsexportcommit(1)
> > Export a single commit to a CVS checkout.
> >
> > git-svn(1)
> > Bidirectional operation between a Subversion repository and Git.
> >
> > git-p4(1)
> > Import from and submit to Perforce repositories.
> >
> > git-quiltimport(1)
> > Applies a quilt patchset onto the current branch.
> >
> > git-archimport(1)
> > Import a GNU Arch repository into Git.
> >
> > git-imap-send(1)
> > Send a collection of patches from stdin to an IMAP folder.
> >
> >LOW-LEVEL COMMANDS (PLUMBING)
> > Although Git includes its own porcelain layer, its low-level commands
> > are sufficient to support development of alternative porcelains.
> > Developers of such porcelains might start by reading about git-update-
> > index(1) and git-read-tree(1).
> >
> > The interface (input, output, set of options and the semantics) to
> > these low-level commands are meant to be a lot more stable than
> > Porcelain level commands, because these commands are primarily for
> > scripted use. The interface to Porcelain commands on the other hand are
> > subject to change in order to improve the end user experience.
> >
> > The following description divides the low-level commands into commands
> > that manipulate objects (in the repository, index, and working tree),
> > commands that interrogate and compare objects, and commands that move
> > objects and references between repositories.
> >
> > Manipulation commands
> > git-update-index(1)
> > Register file contents in the working tree to the index.
> >
> > git-write-tree(1)
> > Create a tree object from the current index.
> >
> > git-read-tree(1)
> > Reads tree information into the index.
> >
> > git-checkout-index(1)
> > Copy files from the index to the working tree.
> >
> > git-merge-index(1)
> > Run a merge for files needing merging.
> >
> > git-prune-packed(1)
> > Remove extra objects that are already in pack files.
> >
> > git-apply(1)
> > Apply a patch to files and/or to the index.
> >
> > git-merge-file(1)
> > Run a three-way file merge.
> >
> > git-mktag(1)
> > Creates a tag object.
> >
> > git-hash-object(1)
> > Compute object ID and optionally creates a blob from a file.
> >
> > git-update-ref(1)
> > Update the object name stored in a ref safely.
> >
> > git-symbolic-ref(1)
> > Read, modify and delete symbolic refs.
> >
> > git-commit-tree(1)
> > Create a new commit object.
> >
> > git-commit-graph(1)
> > Write and verify Git commit-graph files.
> >
> > git-mktree(1)
> > Build a tree-object from ls-tree formatted text.
> >
> > git-pack-objects(1)
> > Create a packed archive of objects.
> >
> > git-unpack-objects(1)
> > Unpack objects from a packed archive.
> >
> > git-index-pack(1)
> > Build pack index file for an existing packed archive.
> >
> > git-multi-pack-index(1)
> > Write and verify multi-pack-indexes.
> >
> > Interrogation commands
> > git-cat-file(1)
> > Provide content or type and size information for repository
> > objects.
> >
> > git-ls-tree(1)
> > List the contents of a tree object.
> >
> > git-ls-files(1)
> > Show information about files in the index and the working tree.
> >
> > git-diff-files(1)
> > Compares files in the working tree and the index.
> >
> > git-name-rev(1)
> > Find symbolic names for given revs.
> >
> > git-cherry(1)
> > Find commits yet to be applied to upstream.
> >
> > git-var(1)
> > Show a Git logical variable.
> >
> > git-rev-list(1)
> > Lists commit objects in reverse chronological order.
> >
> > git-rev-parse(1)
> > Pick out and massage parameters.
> >
> > git-for-each-ref(1)
> > Output information on each ref.
> >
> > git-show-ref(1)
> > List references in a local repository.
> >
> > git-ls-remote(1)
> > List references in a remote repository.
> >
> > git-diff-tree(1)
> > Compares the content and mode of blobs found via two tree objects.
> >
> > git-diff-index(1)
> > Compare a tree to the working tree or index.
> >
> > git-merge-base(1)
> > Find as good common ancestors as possible for a merge.
> >
> > git-verify-pack(1)
> > Validate packed Git archive files.
> >
> > git-pack-redundant(1)
> > Find redundant pack files.
> >
> > git-unpack-file(1)
> > Creates a temporary file with a blob's contents.
> >
> > git-show-index(1)
> > Show packed archive index.
> >
> > git-get-tar-commit-id(1)
> > Extract commit ID from an archive created using git-archive.
> >
> > In general, the interrogate commands do not touch the files in the
> > working tree.
> >
> > Synching repositories
> > git-daemon(1)
> > A really simple server for Git repositories.
> >
> > git-http-backend(1)
> > Server side implementation of Git over HTTP.
> >
> > git-update-server-info(1)
> > Update auxiliary info file to help dumb servers.
> >
> > git-send-pack(1)
> > Push objects over Git protocol to another repository.
> >
> > git-fetch-pack(1)
> > Receive missing objects from another repository.
> >
> > The following are helper commands used by the above; end users
> > typically do not use them directly.
> >
> > git-shell(1)
> > Restricted login shell for Git-only SSH access.
> >
> > git-parse-remote(1)
> > Routines to help parsing remote repository access parameters.
> >
> > git-receive-pack(1)
> > Receive what is pushed into the repository.
> >
> > git-upload-pack(1)
> > Send objects packed back to git-fetch-pack.
> >
> > git-upload-archive(1)
> > Send archive back to git-archive.
> >
> > git-http-fetch(1)
> > Download from a remote Git repository via HTTP.
> >
> > git-http-push(1)
> > Push objects over HTTP/DAV to another repository.
> >
> > Internal helper commands
> > These are internal helper commands used by other commands; end users
> > typically do not use them directly.
> >
> > git-merge-one-file(1)
> > The standard helper program to use with git-merge-index.
> >
> > git-sh-setup(1)
> > Common Git shell script setup code.
> >
> > git-check-ref-format(1)
> > Ensures that a reference name is well formed.
> >
> > git-check-ignore(1)
> > Debug gitignore / exclude files.
> >
> > git-check-attr(1)
> > Display gitattributes information.
> >
> > git-credential(1)
> > Retrieve and store user credentials.
> >
> > git-credential-cache(1)
> > Helper to temporarily store passwords in memory.
> >
> > git-credential-store(1)
> > Helper to store credentials on disk.
> >
> > git-fmt-merge-msg(1)
> > Produce a merge commit message.
> >
> > git-check-mailmap(1)
> > Show canonical names and email addresses of contacts.
> >
> > git-mailsplit(1)
> > Simple UNIX mbox splitter program.
> >
> > git-mailinfo(1)
> > Extracts patch and authorship from a single e-mail message.
> >
> > git-interpret-trailers(1)
> > add or parse structured information in commit messages.
> >
> > git-column(1)
> > Display data in columns.
> >
> > git-stripspace(1)
> > Remove unnecessary whitespace.
> >
> > git-patch-id(1)
> > Compute unique ID for a patch.
> >
> > git-sh-i18n(1)
> > Git's i18n setup code for shell scripts.
> >
> >CONFIGURATION MECHANISM
> > Git uses a simple text format to store customizations that are per
> > repository and are per user. Such a configuration file may look like
> > this:
> >
> > #
> > # A '#' or ';' character indicates a comment.
> > #
> >
> > ; core variables
> > [core]
> > ; Don't trust file modes
> > filemode = false
> >
> > ; user identity
> > [user]
> > name = "Junio C Hamano"
> > email = "gitster@pobox.com"
> >
> > Various commands read from the configuration file and adjust their
> > operation accordingly. See git-config(1) for a list and more details
> > about the configuration mechanism.
> >
> >IDENTIFIER TERMINOLOGY
> > <object>
> > Indicates the object name for any type of object.
> >
> > <blob>
> > Indicates a blob object name.
> >
> > <tree>
> > Indicates a tree object name.
> >
> > <commit>
> > Indicates a commit object name.
> >
> > <tree-ish>
> > Indicates a tree, commit or tag object name. A command that takes a
> > <tree-ish> argument ultimately wants to operate on a <tree> object
> > but automatically dereferences <commit> and <tag> objects that
> > point at a <tree>.
> >
> > <commit-ish>
> > Indicates a commit or tag object name. A command that takes a
> > <commit-ish> argument ultimately wants to operate on a <commit>
> > object but automatically dereferences <tag> objects that point at a
> > <commit>.
> >
> > <type>
> > Indicates that an object type is required. Currently one of: blob,
> > tree, commit, or tag.
> >
> > <file>
> > Indicates a filename - almost always relative to the root of the
> > tree structure GIT_INDEX_FILE describes.
> >
> >SYMBOLIC IDENTIFIERS
> > Any Git command accepting any <object> can also use the following
> > symbolic notation:
> >
> > HEAD
> > indicates the head of the current branch.
> >
> > <tag>
> > a valid tag name (i.e. a refs/tags/<tag> reference).
> >
> > <head>
> > a valid head name (i.e. a refs/heads/<head> reference).
> >
> > For a more complete list of ways to spell object names, see "SPECIFYING
> > REVISIONS" section in gitrevisions(7).
> >
> >FILE/DIRECTORY STRUCTURE
> > Please see the gitrepository-layout(5) document.
> >
> > Read githooks(5) for more details about each hook.
> >
> > Higher level SCMs may provide and manage additional information in the
> > $GIT_DIR.
> >
> >TERMINOLOGY
> > Please see gitglossary(7).
> >
> >ENVIRONMENT VARIABLES
> > Various Git commands use the following environment variables:
> >
> > The Git Repository
> > These environment variables apply to all core Git commands. Nb: it is
> > worth noting that they may be used/overridden by SCMS sitting above Git
> > so take care if using a foreign front-end.
> >
> > GIT_INDEX_FILE
> > This environment allows the specification of an alternate index
> > file. If not specified, the default of $GIT_DIR/index is used.
> >
> > GIT_INDEX_VERSION
> > This environment variable allows the specification of an index
> > version for new repositories. It won't affect existing index files.
> > By default index file version 2 or 3 is used. See git-update-
> > index(1) for more information.
> >
> > GIT_OBJECT_DIRECTORY
> > If the object storage directory is specified via this environment
> > variable then the sha1 directories are created underneath -
> > otherwise the default $GIT_DIR/objects directory is used.
> >
> > GIT_ALTERNATE_OBJECT_DIRECTORIES
> > Due to the immutable nature of Git objects, old objects can be
> > archived into shared, read-only directories. This variable
> > specifies a ":" separated (on Windows ";" separated) list of Git
> > object directories which can be used to search for Git objects. New
> > objects will not be written to these directories.
> >
> > Entries that begin with " (double-quote) will be interpreted as
> > C-style quoted paths, removing leading and trailing double-quotes
> > and respecting backslash escapes. E.g., the value
> > "path-with-\"-and-:-in-it":vanilla-path has two paths:
> > path-with-"-and-:-in-it and vanilla-path.
> >
> > GIT_DIR
> > If the GIT_DIR environment variable is set then it specifies a path
> > to use instead of the default .git for the base of the repository.
> > The --git-dir command-line option also sets this value.
> >
> > GIT_WORK_TREE
> > Set the path to the root of the working tree. This can also be
> > controlled by the --work-tree command-line option and the
> > core.worktree configuration variable.
> >
> > GIT_NAMESPACE
> > Set the Git namespace; see gitnamespaces(7) for details. The
> > --namespace command-line option also sets this value.
> >
> > GIT_CEILING_DIRECTORIES
> > This should be a colon-separated list of absolute paths. If set, it
> > is a list of directories that Git should not chdir up into while
> > looking for a repository directory (useful for excluding
> > slow-loading network directories). It will not exclude the current
> > working directory or a GIT_DIR set on the command line or in the
> > environment. Normally, Git has to read the entries in this list and
> > resolve any symlink that might be present in order to compare them
> > with the current directory. However, if even this access is slow,
> > you can add an empty entry to the list to tell Git that the
> > subsequent entries are not symlinks and needn't be resolved; e.g.,
> > GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink.
> >
> > GIT_DISCOVERY_ACROSS_FILESYSTEM
> > When run in a directory that does not have ".git" repository
> > directory, Git tries to find such a directory in the parent
> > directories to find the top of the working tree, but by default it
> > does not cross filesystem boundaries. This environment variable can
> > be set to true to tell Git not to stop at filesystem boundaries.
> > Like GIT_CEILING_DIRECTORIES, this will not affect an explicit
> > repository directory set via GIT_DIR or on the command line.
> >
> > GIT_COMMON_DIR
> > If this variable is set to a path, non-worktree files that are
> > normally in $GIT_DIR will be taken from this path instead.
> > Worktree-specific files such as HEAD or index are taken from
> > $GIT_DIR. See gitrepository-layout(5) and git-worktree(1) for
> > details. This variable has lower precedence than other path
> > variables such as GIT_INDEX_FILE, GIT_OBJECT_DIRECTORY...
> >
> > Git Commits
> > GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME,
> > GIT_COMMITTER_EMAIL, GIT_COMMITTER_DATE, EMAIL
> > see git-commit-tree(1)
> >
> > Git Diffs
> > GIT_DIFF_OPTS
> > Only valid setting is "--unified=??" or "-u??" to set the number of
> > context lines shown when a unified diff is created. This takes
> > precedence over any "-U" or "--unified" option value passed on the
> > Git diff command line.
> >
> > GIT_EXTERNAL_DIFF
> > When the environment variable GIT_EXTERNAL_DIFF is set, the program
> > named by it is called, instead of the diff invocation described
> > above. For a path that is added, removed, or modified,
> > GIT_EXTERNAL_DIFF is called with 7 parameters:
> >
> > path old-file old-hex old-mode new-file new-hex new-mode
> >
> > where:
> >
> > <old|new>-file
> > are files GIT_EXTERNAL_DIFF can use to read the contents of
> > <old|new>,
> >
> > <old|new>-hex
> > are the 40-hexdigit SHA-1 hashes,
> >
> > <old|new>-mode
> > are the octal representation of the file modes.
> >
> > The file parameters can point at the user's working file (e.g.
> > new-file in "git-diff-files"), /dev/null (e.g. old-file when a new
> > file is added), or a temporary file (e.g. old-file in the index).
> > GIT_EXTERNAL_DIFF should not worry about unlinking the temporary
> > file --- it is removed when GIT_EXTERNAL_DIFF exits.
> >
> > For a path that is unmerged, GIT_EXTERNAL_DIFF is called with 1
> > parameter, <path>.
> >
> > For each path GIT_EXTERNAL_DIFF is called, two environment
> > variables, GIT_DIFF_PATH_COUNTER and GIT_DIFF_PATH_TOTAL are set.
> >
> > GIT_DIFF_PATH_COUNTER
> > A 1-based counter incremented by one for every path.
> >
> > GIT_DIFF_PATH_TOTAL
> > The total number of paths.
> >
> > other
> > GIT_MERGE_VERBOSITY
> > A number controlling the amount of output shown by the recursive
> > merge strategy. Overrides merge.verbosity. See git-merge(1)
> >
> > GIT_PAGER
> > This environment variable overrides $PAGER. If it is set to an
> > empty string or to the value "cat", Git will not launch a pager.
> > See also the core.pager option in git-config(1).
> >
> > GIT_EDITOR
> > This environment variable overrides $EDITOR and $VISUAL. It is used
> > by several Git commands when, on interactive mode, an editor is to
> > be launched. See also git-var(1) and the core.editor option in git-
> > config(1).
> >
> > GIT_SSH, GIT_SSH_COMMAND
> > If either of these environment variables is set then git fetch and
> > git push will use the specified command instead of ssh when they
> > need to connect to a remote system. The command-line parameters
> > passed to the configured command are determined by the ssh variant.
> > See ssh.variant option in git-config(1) for details.
> >
> > + $GIT_SSH_COMMAND takes precedence over $GIT_SSH, and is interpreted
> > by the shell, which allows additional arguments to be included.
> > $GIT_SSH on the other hand must be just the path to a program (which
> > can be a wrapper shell script, if additional arguments are needed).
> >
> > + Usually it is easier to configure any desired options through your
> > personal .ssh/config file. Please consult your ssh documentation for
> > further details.
> >
> > GIT_SSH_VARIANT
> > If this environment variable is set, it overrides Git's
> > autodetection whether GIT_SSH/GIT_SSH_COMMAND/core.sshCommand refer
> > to OpenSSH, plink or tortoiseplink. This variable overrides the
> > config setting ssh.variant that serves the same purpose.
> >
> > GIT_ASKPASS
> > If this environment variable is set, then Git commands which need
> > to acquire passwords or passphrases (e.g. for HTTP or IMAP
> > authentication) will call this program with a suitable prompt as
> > command-line argument and read the password from its STDOUT. See
> > also the core.askPass option in git-config(1).
> >
> > GIT_TERMINAL_PROMPT
> > If this environment variable is set to 0, git will not prompt on
> > the terminal (e.g., when asking for HTTP authentication).
> >
> > GIT_CONFIG_NOSYSTEM
> > Whether to skip reading settings from the system-wide
> > $(prefix)/etc/gitconfig file. This environment variable can be used
> > along with $HOME and $XDG_CONFIG_HOME to create a predictable
> > environment for a picky script, or you can set it temporarily to
> > avoid using a buggy /etc/gitconfig file while waiting for someone
> > with sufficient permissions to fix it.
> >
> > GIT_FLUSH
> > If this environment variable is set to "1", then commands such as
> > git blame (in incremental mode), git rev-list, git log, git
> > check-attr and git check-ignore will force a flush of the output
> > stream after each record have been flushed. If this variable is set
> > to "0", the output of these commands will be done using completely
> > buffered I/O. If this environment variable is not set, Git will
> > choose buffered or record-oriented flushing based on whether stdout
> > appears to be redirected to a file or not.
> >
> > GIT_TRACE
> > Enables general trace messages, e.g. alias expansion, built-in
> > command execution and external command execution.
> >
> > If this variable is set to "1", "2" or "true" (comparison is case
> > insensitive), trace messages will be printed to stderr.
> >
> > If the variable is set to an integer value greater than 2 and lower
> > than 10 (strictly) then Git will interpret this value as an open
> > file descriptor and will try to write the trace messages into this
> > file descriptor.
> >
> > Alternatively, if the variable is set to an absolute path (starting
> > with a / character), Git will interpret this as a file path and
> > will try to append the trace messages to it.
> >
> > Unsetting the variable, or setting it to empty, "0" or "false"
> > (case insensitive) disables trace messages.
> >
> > GIT_TRACE_FSMONITOR
> > Enables trace messages for the filesystem monitor extension. See
> > GIT_TRACE for available trace output options.
> >
> > GIT_TRACE_PACK_ACCESS
> > Enables trace messages for all accesses to any packs. For each
> > access, the pack file name and an offset in the pack is recorded.
> > This may be helpful for troubleshooting some pack-related
> > performance problems. See GIT_TRACE for available trace output
> > options.
> >
> > GIT_TRACE_PACKET
> > Enables trace messages for all packets coming in or out of a given
> > program. This can help with debugging object negotiation or other
> > protocol issues. Tracing is turned off at a packet starting with
> > "PACK" (but see GIT_TRACE_PACKFILE below). See GIT_TRACE for
> > available trace output options.
> >
> > GIT_TRACE_PACKFILE
> > Enables tracing of packfiles sent or received by a given program.
> > Unlike other trace output, this trace is verbatim: no headers, and
> > no quoting of binary data. You almost certainly want to direct into
> > a file (e.g., GIT_TRACE_PACKFILE=/tmp/my.pack) rather than
> > displaying it on the terminal or mixing it with other trace output.
> >
> > Note that this is currently only implemented for the client side of
> > clones and fetches.
> >
> > GIT_TRACE_PERFORMANCE
> > Enables performance related trace messages, e.g. total execution
> > time of each Git command. See GIT_TRACE for available trace output
> > options.
> >
> > GIT_TRACE_SETUP
> > Enables trace messages printing the .git, working tree and current
> > working directory after Git has completed its setup phase. See
> > GIT_TRACE for available trace output options.
> >
> > GIT_TRACE_SHALLOW
> > Enables trace messages that can help debugging fetching / cloning
> > of shallow repositories. See GIT_TRACE for available trace output
> > options.
> >
> > GIT_TRACE_CURL
> > Enables a curl full trace dump of all incoming and outgoing data,
> > including descriptive information, of the git transport protocol.
> > This is similar to doing curl --trace-ascii on the command line.
> > This option overrides setting the GIT_CURL_VERBOSE environment
> > variable. See GIT_TRACE for available trace output options.
> >
> > GIT_TRACE_CURL_NO_DATA
> > When a curl trace is enabled (see GIT_TRACE_CURL above), do not
> > dump data (that is, only dump info lines and headers).
> >
> > GIT_REDACT_COOKIES
> > This can be set to a comma-separated list of strings. When a curl
> > trace is enabled (see GIT_TRACE_CURL above), whenever a "Cookies:"
> > header sent by the client is dumped, values of cookies whose key is
> > in that list (case-sensitive) are redacted.
> >
> > GIT_LITERAL_PATHSPECS
> > Setting this variable to 1 will cause Git to treat all pathspecs
> > literally, rather than as glob patterns. For example, running
> > GIT_LITERAL_PATHSPECS=1 git log -- '*.c' will search for commits
> > that touch the path *.c, not any paths that the glob *.c matches.
> > You might want this if you are feeding literal paths to Git (e.g.,
> > paths previously given to you by git ls-tree, --raw diff output,
> > etc).
> >
> > GIT_GLOB_PATHSPECS
> > Setting this variable to 1 will cause Git to treat all pathspecs as
> > glob patterns (aka "glob" magic).
> >
> > GIT_NOGLOB_PATHSPECS
> > Setting this variable to 1 will cause Git to treat all pathspecs as
> > literal (aka "literal" magic).
> >
> > GIT_ICASE_PATHSPECS
> > Setting this variable to 1 will cause Git to treat all pathspecs as
> > case-insensitive.
> >
> > GIT_REFLOG_ACTION
> > When a ref is updated, reflog entries are created to keep track of
> > the reason why the ref was updated (which is typically the name of
> > the high-level command that updated the ref), in addition to the
> > old and new values of the ref. A scripted Porcelain command can use
> > set_reflog_action helper function in git-sh-setup to set its name
> > to this variable when it is invoked as the top level command by the
> > end user, to be recorded in the body of the reflog.
> >
> > GIT_REF_PARANOIA
> > If set to 1, include broken or badly named refs when iterating over
> > lists of refs. In a normal, non-corrupted repository, this does
> > nothing. However, enabling it may help git to detect and abort some
> > operations in the presence of broken refs. Git sets this variable
> > automatically when performing destructive operations like git-
> > prune(1). You should not need to set it yourself unless you want to
> > be paranoid about making sure an operation has touched every ref
> > (e.g., because you are cloning a repository to make a backup).
> >
> > GIT_ALLOW_PROTOCOL
> > If set to a colon-separated list of protocols, behave as if
> > protocol.allow is set to never, and each of the listed protocols
> > has protocol.<name>.allow set to always (overriding any existing
> > configuration). In other words, any protocol not mentioned will be
> > disallowed (i.e., this is a whitelist, not a blacklist). See the
> > description of protocol.allow in git-config(1) for more details.
> >
> > GIT_PROTOCOL_FROM_USER
> > Set to 0 to prevent protocols used by fetch/push/clone which are
> > configured to the user state. This is useful to restrict recursive
> > submodule initialization from an untrusted repository or for
> > programs which feed potentially-untrusted URLS to git commands. See
> > git-config(1) for more details.
> >
> > GIT_PROTOCOL
> > For internal use only. Used in handshaking the wire protocol.
> > Contains a colon : separated list of keys with optional values
> > key[=value]. Presence of unknown keys and values must be ignored.
> >
> > GIT_OPTIONAL_LOCKS
> > If set to 0, Git will complete any requested operation without
> > performing any optional sub-operations that require taking a lock.
> > For example, this will prevent git status from refreshing the index
> > as a side effect. This is useful for processes running in the
> > background which do not want to cause lock contention with other
> > operations on the repository. Defaults to 1.
> >
> > GIT_REDIRECT_STDIN, GIT_REDIRECT_STDOUT, GIT_REDIRECT_STDERR
> > Windows-only: allow redirecting the standard input/output/error
> > handles to paths specified by the environment variables. This is
> > particularly useful in multi-threaded applications where the
> > canonical way to pass standard handles via CreateProcess() is not
> > an option because it would require the handles to be marked
> > inheritable (and consequently every spawned process would inherit
> > them, possibly blocking regular Git operations). The primary
> > intended use case is to use named pipes for communication (e.g.
> > \\.\pipe\my-git-stdin-123).
> >
> > Two special values are supported: off will simply close the
> > corresponding standard handle, and if GIT_REDIRECT_STDERR is 2>&1,
> > standard error will be redirected to the same handle as standard
> > output.
> >
> > GIT_PRINT_SHA1_ELLIPSIS (deprecated)
> > If set to yes, print an ellipsis following an (abbreviated) SHA-1
> > value. This affects indications of detached HEADs (git-checkout(1))
> > and the raw diff output (git-diff(1)). Printing an ellipsis in the
> > cases mentioned is no longer considered adequate and support for it
> > is likely to be removed in the foreseeable future (along with the
> > variable).
> >
> >DISCUSSION
> > More detail on the following is available from the Git concepts chapter
> > of the user-manual[2] and gitcore-tutorial(7).
> >
> > A Git project normally consists of a working directory with a ".git"
> > subdirectory at the top level. The .git directory contains, among other
> > things, a compressed object database representing the complete history
> > of the project, an "index" file which links that history to the current
> > contents of the working tree, and named pointers into that history such
> > as tags and branch heads.
> >
> > The object database contains objects of three main types: blobs, which
> > hold file data; trees, which point to blobs and other trees to build up
> > directory hierarchies; and commits, which each reference a single tree
> > and some number of parent commits.
> >
> > The commit, equivalent to what other systems call a "changeset" or
> > "version", represents a step in the project's history, and each parent
> > represents an immediately preceding step. Commits with more than one
> > parent represent merges of independent lines of development.
> >
> > All objects are named by the SHA-1 hash of their contents, normally
> > written as a string of 40 hex digits. Such names are globally unique.
> > The entire history leading up to a commit can be vouched for by signing
> > just that commit. A fourth object type, the tag, is provided for this
> > purpose.
> >
> > When first created, objects are stored in individual files, but for
> > efficiency may later be compressed together into "pack files".
> >
> > Named pointers called refs mark interesting points in history. A ref
> > may contain the SHA-1 name of an object or the name of another ref.
> > Refs with names beginning ref/head/ contain the SHA-1 name of the most
> > recent commit (or "head") of a branch under development. SHA-1 names of
> > tags of interest are stored under ref/tags/. A special ref named HEAD
> > contains the name of the currently checked-out branch.
> >
> > The index file is initialized with a list of all paths and, for each
> > path, a blob object and a set of attributes. The blob object represents
> > the contents of the file as of the head of the current branch. The
> > attributes (last modified time, size, etc.) are taken from the
> > corresponding file in the working tree. Subsequent changes to the
> > working tree can be found by comparing these attributes. The index may
> > be updated with new content, and new commits may be created from the
> > content stored in the index.
> >
> > The index is also capable of storing multiple entries (called "stages")
> > for a given pathname. These stages are used to hold the various
> > unmerged version of a file when a merge is in progress.
> >
> >FURTHER DOCUMENTATION
> > See the references in the "description" section to get started using
> > Git. The following is probably more detail than necessary for a
> > first-time user.
> >
> > The Git concepts chapter of the user-manual[2] and gitcore-tutorial(7)
> > both provide introductions to the underlying Git architecture.
> >
> > See gitworkflows(7) for an overview of recommended workflows.
> >
> > See also the howto[3] documents for some useful examples.
> >
> > The internals are documented in the Git API documentation[4].
> >
> > Users migrating from CVS may also want to read gitcvs-migration(7).
> >
> >AUTHORS
> > Git was started by Linus Torvalds, and is currently maintained by Junio
> > C Hamano. Numerous contributions have come from the Git mailing list
> > <git@vger.kernel.org[5]>.
> > http://www.openhub.net/p/git/contributors/summary gives you a more
> > complete list of contributors.
> >
> > If you have a clone of git.git itself, the output of git-shortlog(1)
> > and git-blame(1) can show you the authors for specific parts of the
> > project.
> >
> >REPORTING BUGS
> > Report bugs to the Git mailing list <git@vger.kernel.org[5]> where the
> > development and maintenance is primarily done. You do not have to be
> > subscribed to the list to send a message there. See the list archive at
> > https://public-inbox.org/git for previous bug reports and other
> > discussions.
> >
> > Issues which are security relevant should be disclosed privately to the
> > Git Security mailing list <git-security@googlegroups.com[6]>.
> >
> >SEE ALSO
> > gittutorial(7), gittutorial-2(7), giteveryday(7), gitcvs-migration(7),
> > gitglossary(7), gitcore-tutorial(7), gitcli(7), The Git User's
> > Manual[1], gitworkflows(7)
> >
> >GIT
> > Part of the git(1) suite
> >
> >NOTES
> > 1. Git User's Manual
> > file:///home/frederik/share/doc/git-doc/user-manual.html
> >
> > 2. Git concepts chapter of the user-manual
> > file:///home/frederik/share/doc/git-doc/user-manual.html#git-concepts
> >
> > 3. howto
> > file:///home/frederik/share/doc/git-doc/howto-index.html
> >
> > 4. Git API documentation
> > file:///home/frederik/share/doc/git-doc/technical/api-index.html
> >
> > 5. git@vger.kernel.org
> > mailto:git@vger.kernel.org
> >
> > 6. git-security@googlegroups.com
> > mailto:git-security@googlegroups.com
> >
> >Git 2.21.0.rc1.9.g3f 02/18/2019 GIT(1)
>
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2019-03-11 14:38 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-06 20:04 de-alphabetizing the documentation frederik
2018-07-06 21:16 ` Jonathan Nieder
2018-07-06 21:18 ` Jonathan Nieder
2018-07-06 23:21 ` frederik
2018-07-06 23:47 ` Jonathan Nieder
2018-07-08 1:09 ` frederik
2018-07-24 19:52 ` frederik
2018-07-24 21:11 ` Jonathan Nieder
2018-08-11 2:30 ` frederik
2018-08-13 18:17 ` Junio C Hamano
2019-02-19 17:54 ` [PATCH 0/1] de-alphabetize command list Frederick Eaton
2019-02-21 18:05 ` frederik
2019-03-11 9:04 ` frederik
2019-03-11 14:38 ` Jacob Keller
2019-02-19 17:54 ` [PATCH] Prioritize list of commands appearing in git(1), via command-list.txt. Don't invoke 'sort' in Documentation/cmd-list.perl Frederick Eaton
2018-07-07 4:25 ` de-alphabetizing the documentation Theodore Y. Ts'o
2018-07-06 21:32 ` Eric Sunshine
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).