From: Brandon Williams <bmwill@google.com>
To: git@vger.kernel.org
Cc: jonathantanmy@google.com, gitster@pobox.com, sbeller@google.com,
Brandon Williams <bmwill@google.com>
Subject: [PATCH v3 2/8] upload-pack: implement ref-in-want
Date: Wed, 20 Jun 2018 14:32:29 -0700 [thread overview]
Message-ID: <20180620213235.10952-3-bmwill@google.com> (raw)
In-Reply-To: <20180620213235.10952-1-bmwill@google.com>
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com>
---
Documentation/config.txt | 7 ++
Documentation/technical/protocol-v2.txt | 28 ++++-
t/t5703-upload-pack-ref-in-want.sh | 153 ++++++++++++++++++++++++
upload-pack.c | 64 ++++++++++
4 files changed, 251 insertions(+), 1 deletion(-)
create mode 100755 t/t5703-upload-pack-ref-in-want.sh
diff --git a/Documentation/config.txt b/Documentation/config.txt
index ab641bf5a..fb1dd7428 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -3479,6 +3479,13 @@ Note that this configuration variable is ignored if it is seen in the
repository-level config (this is a safety measure against fetching from
untrusted repositories).
+uploadpack.allowRefInWant::
+ If this option is set, `upload-pack` will support the `ref-in-want`
+ feature of the protocol version 2 `fetch` command. This feature
+ is intended for the benefit of load-balanced servers which may
+ not have the same view of what OIDs their refs point to due to
+ replication delay.
+
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a
diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt
index 49bda76d2..9dee75d45 100644
--- a/Documentation/technical/protocol-v2.txt
+++ b/Documentation/technical/protocol-v2.txt
@@ -299,12 +299,21 @@ included in the client's request:
for use with partial clone and partial fetch operations. See
`rev-list` for possible "filter-spec" values.
+If the 'ref-in-want' feature is advertised, the following argument can
+be included in the client's request as well as the potential addition of
+the 'wanted-refs' section in the server's response as explained below.
+
+ want-ref <ref>
+ Indicates to the server that the client wants to retrieve a
+ particular ref, where <ref> is the full name of a ref on the
+ server.
+
The response of `fetch` is broken into a number of sections separated by
delimiter packets (0001), with each section beginning with its section
header.
output = *section
- section = (acknowledgments | shallow-info | packfile)
+ section = (acknowledgments | shallow-info | wanted-refs | packfile)
(flush-pkt | delim-pkt)
acknowledgments = PKT-LINE("acknowledgments" LF)
@@ -319,6 +328,10 @@ header.
shallow = "shallow" SP obj-id
unshallow = "unshallow" SP obj-id
+ wanted-refs = PKT-LINE("wanted-refs" LF)
+ *PKT-LINE(wanted-ref LF)
+ wanted-ref = obj-id SP refname
+
packfile = PKT-LINE("packfile" LF)
*PKT-LINE(%x01-03 *%x00-ff)
@@ -379,6 +392,19 @@ header.
* This section is only included if a packfile section is also
included in the response.
+ wanted-refs section
+ * This section is only included if the client has requested a
+ ref using a 'want-ref' line and if a packfile section is also
+ included in the response.
+
+ * Always begins with the section header "wanted-refs"
+
+ * The server will send a ref listing ("<oid> <refname>") for
+ each reference requested using 'want-ref' lines.
+
+ * The server MUST NOT send any refs which were not requested
+ using 'want-ref' lines.
+
packfile section
* This section is only included if the client has sent 'want'
lines in its request and either requested that no more
diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh
new file mode 100755
index 000000000..0ef182970
--- /dev/null
+++ b/t/t5703-upload-pack-ref-in-want.sh
@@ -0,0 +1,153 @@
+#!/bin/sh
+
+test_description='upload-pack ref-in-want'
+
+. ./test-lib.sh
+
+get_actual_refs() {
+ sed -n '/wanted-refs/,/0001/p' <out | sed '1d;$d' | test-pkt-line unpack >actual_refs
+}
+
+get_actual_commits() {
+ sed -n '/packfile/,/0000/p' <out | sed '1d' | test-pkt-line unpack-sideband >o.pack &&
+ git index-pack o.pack &&
+ git verify-pack -v o.idx | grep commit | cut -c-40 | sort >actual_commits
+}
+
+check_output() {
+ get_actual_refs &&
+ test_cmp expected_refs actual_refs &&
+ get_actual_commits &&
+ test_cmp expected_commits actual_commits
+}
+
+# c(o/foo) d(o/bar)
+# \ /
+# b e(baz) f(master)
+# \__ | __/
+# \ | /
+# a
+test_expect_success 'setup repository' '
+ test_commit a &&
+ git checkout -b o/foo &&
+ test_commit b &&
+ test_commit c &&
+ git checkout -b o/bar b &&
+ test_commit d &&
+ git checkout -b baz a &&
+ test_commit e &&
+ git checkout master &&
+ test_commit f
+'
+
+test_expect_success 'config controls ref-in-want advertisement' '
+ git serve --advertise-capabilities >out &&
+ ! grep -a ref-in-want out &&
+
+ git config uploadpack.allowRefInWant false &&
+ git serve --advertise-capabilities >out &&
+ ! grep -a ref-in-want out &&
+
+ git config uploadpack.allowRefInWant true &&
+ git serve --advertise-capabilities >out &&
+ grep -a ref-in-want out
+'
+
+test_expect_success 'invalid want-ref line' '
+ test-pkt-line pack >in <<-EOF &&
+ command=fetch
+ 0001
+ no-progress
+ want-ref refs/heads/non-existent
+ done
+ 0000
+ EOF
+
+ test_must_fail git serve --stateless-rpc 2>out <in &&
+ grep "unknown ref" out
+'
+
+test_expect_success 'basic want-ref' '
+ cat >expected_refs <<-EOF &&
+ $(git rev-parse f) refs/heads/master
+ EOF
+ git rev-parse f | sort >expected_commits &&
+
+ test-pkt-line pack >in <<-EOF &&
+ command=fetch
+ 0001
+ no-progress
+ want-ref refs/heads/master
+ have $(git rev-parse a)
+ done
+ 0000
+ EOF
+
+ git serve --stateless-rpc >out <in &&
+ check_output
+'
+
+test_expect_success 'multiple want-ref lines' '
+ cat >expected_refs <<-EOF &&
+ $(git rev-parse c) refs/heads/o/foo
+ $(git rev-parse d) refs/heads/o/bar
+ EOF
+ git rev-parse c d | sort >expected_commits &&
+
+ test-pkt-line pack >in <<-EOF &&
+ command=fetch
+ 0001
+ no-progress
+ want-ref refs/heads/o/foo
+ want-ref refs/heads/o/bar
+ have $(git rev-parse b)
+ done
+ 0000
+ EOF
+
+ git serve --stateless-rpc >out <in &&
+ check_output
+'
+
+test_expect_success 'mix want and want-ref' '
+ cat >expected_refs <<-EOF &&
+ $(git rev-parse f) refs/heads/master
+ EOF
+ git rev-parse e f | sort >expected_commits &&
+
+ test-pkt-line pack >in <<-EOF &&
+ command=fetch
+ 0001
+ no-progress
+ want-ref refs/heads/master
+ want $(git rev-parse e)
+ have $(git rev-parse a)
+ done
+ 0000
+ EOF
+
+ git serve --stateless-rpc >out <in &&
+ check_output
+'
+
+test_expect_success 'want-ref with ref we already have commit for' '
+ cat >expected_refs <<-EOF &&
+ $(git rev-parse c) refs/heads/o/foo
+ EOF
+ >expected_commits &&
+
+ test-pkt-line pack >in <<-EOF &&
+ command=fetch
+ 0001
+ no-progress
+ want-ref refs/heads/o/foo
+ have $(git rev-parse c)
+ done
+ 0000
+ EOF
+
+ git serve --stateless-rpc >out <in &&
+ check_output
+'
+
+test_done
diff --git a/upload-pack.c b/upload-pack.c
index 87c6722ea..47858d367 100644
--- a/upload-pack.c
+++ b/upload-pack.c
@@ -64,6 +64,7 @@ static const char *pack_objects_hook;
static int filter_capability_requested;
static int allow_filter;
+static int allow_ref_in_want;
static struct list_objects_filter_options filter_options;
static void reset_timeout(void)
@@ -1075,6 +1076,8 @@ static int upload_pack_config(const char *var, const char *value, void *unused)
return git_config_string(&pack_objects_hook, var, value);
} else if (!strcmp("uploadpack.allowfilter", var)) {
allow_filter = git_config_bool(var, value);
+ } else if (!strcmp("uploadpack.allowrefinwant", var)) {
+ allow_ref_in_want = git_config_bool(var, value);
}
return parse_hide_refs_config(var, value, "uploadpack");
}
@@ -1114,6 +1117,7 @@ void upload_pack(struct upload_pack_options *options)
struct upload_pack_data {
struct object_array wants;
+ struct string_list wanted_refs;
struct oid_array haves;
struct object_array shallows;
@@ -1135,12 +1139,14 @@ struct upload_pack_data {
static void upload_pack_data_init(struct upload_pack_data *data)
{
struct object_array wants = OBJECT_ARRAY_INIT;
+ struct string_list wanted_refs = STRING_LIST_INIT_DUP;
struct oid_array haves = OID_ARRAY_INIT;
struct object_array shallows = OBJECT_ARRAY_INIT;
struct string_list deepen_not = STRING_LIST_INIT_DUP;
memset(data, 0, sizeof(*data));
data->wants = wants;
+ data->wanted_refs = wanted_refs;
data->haves = haves;
data->shallows = shallows;
data->deepen_not = deepen_not;
@@ -1149,6 +1155,7 @@ static void upload_pack_data_init(struct upload_pack_data *data)
static void upload_pack_data_clear(struct upload_pack_data *data)
{
object_array_clear(&data->wants);
+ string_list_clear(&data->wanted_refs, 1);
oid_array_clear(&data->haves);
object_array_clear(&data->shallows);
string_list_clear(&data->deepen_not, 0);
@@ -1185,6 +1192,32 @@ static int parse_want(const char *line)
return 0;
}
+static int parse_want_ref(const char *line, struct string_list *wanted_refs)
+{
+ const char *arg;
+ if (skip_prefix(line, "want-ref ", &arg)) {
+ struct object_id oid;
+ struct string_list_item *item;
+ struct object *o;
+
+ if (read_ref(arg, &oid))
+ die("unknown ref %s", arg);
+
+ item = string_list_append(wanted_refs, arg);
+ item->util = oiddup(&oid);
+
+ o = parse_object_or_die(&oid, arg);
+ if (!(o->flags & WANTED)) {
+ o->flags |= WANTED;
+ add_object_array(o, NULL, &want_obj);
+ }
+
+ return 1;
+ }
+
+ return 0;
+}
+
static int parse_have(const char *line, struct oid_array *haves)
{
const char *arg;
@@ -1210,6 +1243,8 @@ static void process_args(struct packet_reader *request,
/* process want */
if (parse_want(arg))
continue;
+ if (allow_ref_in_want && parse_want_ref(arg, &data->wanted_refs))
+ continue;
/* process have line */
if (parse_have(arg, &data->haves))
continue;
@@ -1352,6 +1387,24 @@ static int process_haves_and_send_acks(struct upload_pack_data *data)
return ret;
}
+static void send_wanted_ref_info(struct upload_pack_data *data)
+{
+ const struct string_list_item *item;
+
+ if (!data->wanted_refs.nr)
+ return;
+
+ packet_write_fmt(1, "wanted-refs\n");
+
+ for_each_string_list_item(item, &data->wanted_refs) {
+ packet_write_fmt(1, "%s %s\n",
+ oid_to_hex(item->util),
+ item->string);
+ }
+
+ packet_delim(1);
+}
+
static void send_shallow_info(struct upload_pack_data *data)
{
/* No shallow info needs to be sent */
@@ -1418,6 +1471,7 @@ int upload_pack_v2(struct repository *r, struct argv_array *keys,
state = FETCH_DONE;
break;
case FETCH_SEND_PACK:
+ send_wanted_ref_info(&data);
send_shallow_info(&data);
packet_write_fmt(1, "packfile\n");
@@ -1438,12 +1492,22 @@ int upload_pack_advertise(struct repository *r,
{
if (value) {
int allow_filter_value;
+ int allow_ref_in_want;
+
strbuf_addstr(value, "shallow");
+
if (!repo_config_get_bool(the_repository,
"uploadpack.allowfilter",
&allow_filter_value) &&
allow_filter_value)
strbuf_addstr(value, " filter");
+
+ if (!repo_config_get_bool(the_repository,
+ "uploadpack.allowrefinwant",
+ &allow_ref_in_want) &&
+ allow_ref_in_want)
+ strbuf_addstr(value, " ref-in-want");
}
+
return 1;
}
--
2.18.0.rc1.244.gcf134e6275-goog
next prev parent reply other threads:[~2018-06-20 21:32 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 17:51 [PATCH 0/8] ref-in-want Brandon Williams
2018-06-05 17:51 ` [PATCH 1/8] test-pkt-line: add unpack-sideband subcommand Brandon Williams
2018-06-05 17:51 ` [PATCH 2/8] upload-pack: implement ref-in-want Brandon Williams
2018-06-05 19:11 ` Ramsay Jones
2018-06-05 20:32 ` Ævar Arnfjörð Bjarmason
2018-06-06 21:32 ` Brandon Williams
2018-06-06 22:42 ` Ævar Arnfjörð Bjarmason
2018-06-06 22:45 ` Brandon Williams
2018-06-05 17:51 ` [PATCH 3/8] upload-pack: test negotiation with changing repository Brandon Williams
2018-06-05 17:51 ` [PATCH 4/8] fetch: refactor the population of peer ref OIDs Brandon Williams
2018-06-05 17:51 ` [PATCH 5/8] fetch: refactor fetch_refs into two functions Brandon Williams
2018-06-05 17:51 ` [PATCH 6/8] fetch: refactor to make function args narrower Brandon Williams
2018-06-05 17:51 ` [PATCH 7/8] fetch-pack: put shallow info in output parameter Brandon Williams
2018-06-05 17:51 ` [PATCH 8/8] fetch-pack: implement ref-in-want Brandon Williams
2018-06-13 21:39 ` [PATCH v2 0/8] ref-in-want Brandon Williams
2018-06-13 21:39 ` [PATCH v2 1/8] test-pkt-line: add unpack-sideband subcommand Brandon Williams
2018-06-14 18:09 ` Stefan Beller
2018-06-14 19:21 ` Brandon Williams
2018-06-13 21:39 ` [PATCH v2 2/8] upload-pack: implement ref-in-want Brandon Williams
2018-06-14 18:40 ` Stefan Beller
2018-06-14 18:52 ` Brandon Williams
2018-06-15 21:08 ` Junio C Hamano
2018-06-15 21:14 ` Junio C Hamano
2018-06-19 18:50 ` Brandon Williams
2018-06-19 20:37 ` Junio C Hamano
2018-06-19 23:14 ` Brandon Williams
2018-06-21 16:38 ` Junio C Hamano
2018-06-13 21:39 ` [PATCH v2 3/8] upload-pack: test negotiation with changing repository Brandon Williams
2018-06-14 19:23 ` Stefan Beller
2018-06-13 21:39 ` [PATCH v2 4/8] fetch: refactor the population of peer ref OIDs Brandon Williams
2018-06-13 21:39 ` [PATCH v2 5/8] fetch: refactor fetch_refs into two functions Brandon Williams
2018-06-13 21:39 ` [PATCH v2 6/8] fetch: refactor to make function args narrower Brandon Williams
2018-06-14 19:32 ` Stefan Beller
2018-06-13 21:39 ` [PATCH v2 7/8] fetch-pack: put shallow info in output parameter Brandon Williams
2018-06-14 19:42 ` Stefan Beller
2018-06-14 23:59 ` Jonathan Tan
2018-06-19 17:41 ` Brandon Williams
2018-06-13 21:39 ` [PATCH v2 8/8] fetch-pack: implement ref-in-want Brandon Williams
2018-06-14 19:56 ` Stefan Beller
2018-06-14 21:18 ` Brandon Williams
2018-06-22 22:29 ` Jonathan Nieder
2018-06-15 21:20 ` [PATCH v2 0/8] ref-in-want Junio C Hamano
2018-06-18 18:05 ` Brandon Williams
2018-06-20 21:32 ` [PATCH v3 " Brandon Williams
2018-06-20 21:32 ` [PATCH v3 1/8] test-pkt-line: add unpack-sideband subcommand Brandon Williams
2018-06-22 21:12 ` Jonathan Nieder
2018-06-20 21:32 ` Brandon Williams [this message]
2018-06-25 17:40 ` [PATCH v3 2/8] upload-pack: implement ref-in-want Jonathan Tan
2018-06-25 18:09 ` Jonathan Tan
2018-06-25 18:20 ` Brandon Williams
2018-06-20 21:32 ` [PATCH v3 3/8] upload-pack: test negotiation with changing repository Brandon Williams
2018-06-20 21:32 ` [PATCH v3 4/8] fetch: refactor the population of peer ref OIDs Brandon Williams
2018-06-25 17:45 ` Jonathan Tan
2018-06-20 21:32 ` [PATCH v3 5/8] fetch: refactor fetch_refs into two functions Brandon Williams
2018-06-22 21:26 ` Jonathan Nieder
2018-06-22 21:42 ` Jonathan Nieder
2018-06-20 21:32 ` [PATCH v3 6/8] fetch: refactor to make function args narrower Brandon Williams
2018-06-20 21:32 ` [PATCH v3 7/8] fetch-pack: put shallow info in output parameter Brandon Williams
2018-06-25 18:03 ` Jonathan Tan
2018-06-25 18:18 ` Brandon Williams
2018-06-20 21:32 ` [PATCH v3 8/8] fetch-pack: implement ref-in-want Brandon Williams
2018-06-22 23:01 ` Jonathan Nieder
2018-06-25 18:08 ` Brandon Williams
2018-06-25 18:53 ` [PATCH v4 0/8] ref-in-want Brandon Williams
2018-06-25 18:53 ` [PATCH v4 1/8] test-pkt-line: add unpack-sideband subcommand Brandon Williams
2018-06-25 18:53 ` [PATCH v4 2/8] upload-pack: implement ref-in-want Brandon Williams
2018-06-25 18:53 ` [PATCH v4 3/8] upload-pack: test negotiation with changing repository Brandon Williams
2018-06-25 22:27 ` Jonathan Tan
2018-06-25 18:53 ` [PATCH v4 4/8] fetch: refactor the population of peer ref OIDs Brandon Williams
2018-06-25 18:53 ` [PATCH v4 5/8] fetch: refactor fetch_refs into two functions Brandon Williams
2018-06-25 18:53 ` [PATCH v4 6/8] fetch: refactor to make function args narrower Brandon Williams
2018-06-25 22:36 ` Jonathan Tan
2018-06-25 18:53 ` [PATCH v4 7/8] fetch-pack: put shallow info in output parameter Brandon Williams
2018-06-25 18:53 ` [PATCH v4 8/8] fetch-pack: implement ref-in-want Brandon Williams
2018-06-25 23:03 ` [PATCH v4 0/8] ref-in-want Jonathan Tan
2018-06-26 20:54 ` [PATCH v5 " Brandon Williams
2018-06-26 20:54 ` [PATCH v5 1/8] test-pkt-line: add unpack-sideband subcommand Brandon Williams
2018-06-26 20:54 ` [PATCH v5 2/8] upload-pack: implement ref-in-want Brandon Williams
2018-06-26 21:25 ` Junio C Hamano
2018-06-27 18:05 ` Brandon Williams
2018-06-27 18:53 ` Junio C Hamano
2018-06-27 20:46 ` Brandon Williams
2018-06-27 20:59 ` Stefan Beller
2018-06-27 18:06 ` Jonathan Tan
2018-06-26 20:54 ` [PATCH v5 3/8] upload-pack: test negotiation with changing repository Brandon Williams
2018-06-26 21:34 ` Junio C Hamano
2018-06-27 18:09 ` Brandon Williams
2018-06-27 17:58 ` Jonathan Tan
2018-06-26 20:54 ` [PATCH v5 4/8] fetch: refactor the population of peer ref OIDs Brandon Williams
2018-06-26 20:54 ` [PATCH v5 5/8] fetch: refactor fetch_refs into two functions Brandon Williams
2018-06-26 20:54 ` [PATCH v5 6/8] fetch: refactor to make function args narrower Brandon Williams
2018-06-26 21:40 ` Junio C Hamano
2018-06-26 20:54 ` [PATCH v5 7/8] fetch-pack: put shallow info in output parameter Brandon Williams
2018-06-26 21:42 ` Junio C Hamano
2018-06-27 18:15 ` Brandon Williams
2018-06-26 20:54 ` [PATCH v5 8/8] fetch-pack: implement ref-in-want Brandon Williams
2018-06-27 18:09 ` Jonathan Tan
2018-06-27 18:18 ` Brandon Williams
2018-06-27 22:30 ` [PATCH v6 0/8] ref-in-want Brandon Williams
2018-06-27 22:30 ` [PATCH v6 1/8] test-pkt-line: add unpack-sideband subcommand Brandon Williams
2018-06-27 22:30 ` [PATCH v6 2/8] upload-pack: implement ref-in-want Brandon Williams
2018-06-27 22:30 ` [PATCH v6 3/8] upload-pack: test negotiation with changing repository Brandon Williams
2018-06-27 22:30 ` [PATCH v6 4/8] fetch: refactor the population of peer ref OIDs Brandon Williams
2018-06-27 22:30 ` [PATCH v6 5/8] fetch: refactor fetch_refs into two functions Brandon Williams
2018-06-27 22:30 ` [PATCH v6 6/8] fetch: refactor to make function args narrower Brandon Williams
2018-06-27 22:30 ` [PATCH v6 7/8] fetch-pack: put shallow info in output parameter Brandon Williams
2018-06-27 22:30 ` [PATCH v6 8/8] fetch-pack: implement ref-in-want Brandon Williams
2018-07-22 9:20 ` Duy Nguyen
2018-07-23 17:53 ` Brandon Williams
2018-07-23 18:13 ` Duy Nguyen
2018-07-23 21:28 ` Jonathan Nieder
2018-07-23 17:56 ` [PATCH] fetch-pack: mark die strings for translation Brandon Williams
2018-07-23 18:14 ` Stefan Beller
2018-07-23 21:29 ` Jonathan Nieder
2018-07-23 22:57 ` Junio C Hamano
2018-07-23 22:59 ` Junio C Hamano
2018-07-23 23:00 ` Brandon Williams
2018-06-15 19:04 ` [PATCH 0/8] ref-in-want Jonathan Tan
2018-06-19 17:32 ` Brandon Williams
2018-06-19 19:23 ` Jonathan Tan
2018-06-19 23:16 ` Brandon Williams
2018-06-19 23:38 ` Jonathan Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180620213235.10952-3-bmwill@google.com \
--to=bmwill@google.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=jonathantanmy@google.com \
--cc=sbeller@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).