From: Elijah Newren <newren@gmail.com>
To: git@vger.kernel.org
Cc: Elijah Newren <newren@gmail.com>
Subject: [PATCH 09/30] directory rename detection: testcases checking which side did the rename
Date: Fri, 10 Nov 2017 11:05:29 -0800 [thread overview]
Message-ID: <20171110190550.27059-10-newren@gmail.com> (raw)
In-Reply-To: <20171110190550.27059-1-newren@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
---
t/t6043-merge-rename-directories.sh | 283 ++++++++++++++++++++++++++++++++++++
1 file changed, 283 insertions(+)
diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh
index d15153c652..157299105f 100755
--- a/t/t6043-merge-rename-directories.sh
+++ b/t/t6043-merge-rename-directories.sh
@@ -1053,4 +1053,287 @@ test_expect_failure '5d-check: Directory/file/file conflict due to directory ren
# back to old handling. But, sadly, see testcases 8a and 8b.
###########################################################################
+
+###########################################################################
+# SECTION 6: Same side of the merge was the one that did the rename
+#
+# It may sound obvious that you only want to apply implicit directory
+# renames to directories if the _other_ side of history did the renaming.
+# If you did make an implementation that didn't explicitly enforce this
+# rule, the majority of cases that would fall under this section would
+# also be solved by following the rules from the above sections. But
+# there are still a few that stick out, so this section covers them just
+# to make sure we also get them right.
+###########################################################################
+
+# Testcase 6a, Tricky rename/delete
+# Commit A: z/{b,c,d}
+# Commit B: z/b
+# Commit C: y/{b,c}, z/d
+# Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL)
+# Note: We're just checking here that the rename of z/b and z/c to put
+# them under y/ doesn't accidentally catch z/d and make it look like
+# it is also involved in a rename/delete conflict.
+
+test_expect_success '6a-setup: Tricky rename/delete' '
+ git rm -rf . &&
+ git clean -fdqx &&
+ rm -rf .git &&
+ git init &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ echo d >z/d &&
+ git add z &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git branch A &&
+ git branch B &&
+ git branch C &&
+
+ git checkout B &&
+ git rm z/c &&
+ git rm z/d &&
+ test_tick &&
+ git commit -m "B" &&
+
+ git checkout C &&
+ mkdir y &&
+ git mv z/b y/ &&
+ git mv z/c y/ &&
+ test_tick &&
+ git commit -m "C"
+'
+
+test_expect_success '6a-check: Tricky rename/delete' '
+ git checkout B^0 &&
+
+ test_must_fail git merge -s recursive C^0 >out &&
+ test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out &&
+
+ test 2 -eq $(git ls-files -s | wc -l) &&
+ test 1 -eq $(git ls-files -u | wc -l) &&
+ test 1 -eq $(git ls-files -o | wc -l) &&
+
+ test $(git rev-parse :0:y/b) = $(git rev-parse A:z/b) &&
+ test $(git rev-parse :3:y/c) = $(git rev-parse A:z/c)
+'
+
+# Testcase 6b, Same rename done on both sides
+# (Related to testcases 6c and 8e)
+# Commit A: z/{b,c}
+# Commit B: y/{b,c}
+# Commit C: y/{b,c}, z/d
+# Note: If we did directory rename detection here, we'd move z/d into y/,
+# but C did that rename and still decided to put the file into z/,
+# so we probably shouldn't apply directory rename detection for it.
+
+test_expect_success '6b-setup: Same rename done on both sides' '
+ git rm -rf . &&
+ git clean -fdqx &&
+ rm -rf .git &&
+ git init &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git branch A &&
+ git branch B &&
+ git branch C &&
+
+ git checkout B &&
+ git mv z y &&
+ test_tick &&
+ git commit -m "B" &&
+
+ git checkout C &&
+ git mv z y &&
+ mkdir z &&
+ echo d >z/d &&
+ git add z/d &&
+ test_tick &&
+ git commit -m "C"
+'
+
+test_expect_success '6b-check: Same rename done on both sides' '
+ git checkout B^0 &&
+
+ git merge -s recursive C^0 &&
+
+ test 3 -eq $(git ls-files -s | wc -l) &&
+ test 0 -eq $(git ls-files -u | wc -l) &&
+ test 0 -eq $(git ls-files -o | wc -l) &&
+
+ test $(git rev-parse HEAD:y/b) = $(git rev-parse A:z/b) &&
+ test $(git rev-parse HEAD:y/c) = $(git rev-parse A:z/c) &&
+ test $(git rev-parse HEAD:z/d) = $(git rev-parse C:z/d)
+'
+
+# Testcase 6c, Rename only done on same side
+# (Related to testcases 6b and 8e)
+# Commit A: z/{b,c}
+# Commit B: z/{b,c} (no change)
+# Commit C: y/{b,c}, z/d
+# Expected: y/{b,c}, z/d
+# NOTE: Seems obvious, but just checking that the implementation doesn't
+# "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6c-setup: Rename only done on same side' '
+ git rm -rf . &&
+ git clean -fdqx &&
+ rm -rf .git &&
+ git init &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git branch A &&
+ git branch B &&
+ git branch C &&
+
+ git checkout B &&
+ test_tick &&
+ git commit --allow-empty -m "B" &&
+
+ git checkout C &&
+ git mv z y &&
+ mkdir z &&
+ echo d >z/d &&
+ git add z/d &&
+ test_tick &&
+ git commit -m "C"
+'
+
+test_expect_success '6c-check: Rename only done on same side' '
+ git checkout B^0 &&
+
+ git merge -s recursive C^0 &&
+
+ test 3 -eq $(git ls-files -s | wc -l) &&
+ test 0 -eq $(git ls-files -u | wc -l) &&
+ test 0 -eq $(git ls-files -o | wc -l) &&
+
+ test $(git rev-parse HEAD:y/b) = $(git rev-parse A:z/b) &&
+ test $(git rev-parse HEAD:y/c) = $(git rev-parse A:z/c) &&
+ test $(git rev-parse HEAD:z/d) = $(git rev-parse C:z/d)
+'
+
+# Testcase 6d, We don't always want transitive renaming
+# (Related to testcase 1c)
+# Commit A: z/{b,c}, x/d
+# Commit B: z/{b,c}, x/d (no change)
+# Commit C: y/{b,c}, z/d
+# Expected: y/{b,c}, z/d
+# NOTE: Again, this seems obvious but just checking that the implementation
+# doesn't "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6d-setup: We do not always want transitive renaming' '
+ git rm -rf . &&
+ git clean -fdqx &&
+ rm -rf .git &&
+ git init &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ mkdir x &&
+ echo d >x/d &&
+ git add z x &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git branch A &&
+ git branch B &&
+ git branch C &&
+
+ git checkout B &&
+ test_tick &&
+ git commit --allow-empty -m "B" &&
+
+ git checkout C &&
+ git mv z y &&
+ git mv x z &&
+ test_tick &&
+ git commit -m "C"
+'
+
+test_expect_success '6d-check: We do not always want transitive renaming' '
+ git checkout B^0 &&
+
+ git merge -s recursive C^0 &&
+
+ test 3 -eq $(git ls-files -s | wc -l) &&
+ test 0 -eq $(git ls-files -u | wc -l) &&
+ test 0 -eq $(git ls-files -o | wc -l) &&
+
+ test $(git rev-parse HEAD:y/b) = $(git rev-parse A:z/b) &&
+ test $(git rev-parse HEAD:y/c) = $(git rev-parse A:z/c) &&
+ test $(git rev-parse HEAD:z/d) = $(git rev-parse A:x/d)
+'
+
+# Testcase 6e, Add/add from one-side
+# Commit A: z/{b,c}
+# Commit B: z/{b,c} (no change)
+# Commit C: y/{b,c,d_1}, z/d_2
+# Expected: y/{b,c,d_1}, z/d_2
+# NOTE: Again, this seems obvious but just checking that the implementation
+# doesn't "accidentally detect a rename" and give us y/{b,c} +
+# add/add conflict on y/d_1 vs y/d_2.
+
+test_expect_success '6e-setup: Add/add from one side' '
+ git rm -rf . &&
+ git clean -fdqx &&
+ rm -rf .git &&
+ git init &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git branch A &&
+ git branch B &&
+ git branch C &&
+
+ git checkout B &&
+ test_tick &&
+ git commit --allow-empty -m "B" &&
+
+ git checkout C &&
+ git mv z y &&
+ echo d1 > y/d &&
+ mkdir z &&
+ echo d2 > z/d &&
+ git add y/d z/d &&
+ test_tick &&
+ git commit -m "C"
+'
+
+test_expect_success '6e-check: Add/add from one side' '
+ git checkout B^0 &&
+
+ git merge -s recursive C^0 &&
+
+ test 4 -eq $(git ls-files -s | wc -l) &&
+ test 0 -eq $(git ls-files -u | wc -l) &&
+ test 0 -eq $(git ls-files -o | wc -l) &&
+
+ test $(git rev-parse HEAD:y/b) = $(git rev-parse A:z/b) &&
+ test $(git rev-parse HEAD:y/c) = $(git rev-parse A:z/c) &&
+ test $(git rev-parse HEAD:y/d) = $(git rev-parse C:y/d) &&
+ test $(git rev-parse HEAD:z/d) = $(git rev-parse C:z/d)
+'
+
test_done
--
2.15.0.5.g9567be9905
next prev parent reply other threads:[~2017-11-10 19:06 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 19:05 [PATCH 00/30] Add directory rename detection to git Elijah Newren
2017-11-10 19:05 ` [PATCH 01/30] Tighten and correct a few testcases for merging and cherry-picking Elijah Newren
2017-11-13 19:32 ` Stefan Beller
2017-11-10 19:05 ` [PATCH 02/30] merge-recursive: Fix logic ordering issue Elijah Newren
2017-11-13 19:48 ` Stefan Beller
2017-11-13 22:04 ` Elijah Newren
2017-11-13 22:12 ` Stefan Beller
2017-11-13 23:39 ` Elijah Newren
2017-11-13 23:46 ` Stefan Beller
2017-11-10 19:05 ` [PATCH 03/30] merge-recursive: Add explanation for src_entry and dst_entry Elijah Newren
2017-11-13 21:06 ` Stefan Beller
2017-11-13 22:57 ` Elijah Newren
2017-11-13 23:11 ` Stefan Beller
2017-11-14 1:26 ` Junio C Hamano
2017-11-10 19:05 ` [PATCH 04/30] directory rename detection: basic testcases Elijah Newren
2017-11-13 22:04 ` Stefan Beller
2017-11-14 0:57 ` Elijah Newren
2017-11-14 1:21 ` Stefan Beller
2017-11-14 1:40 ` Elijah Newren
2017-11-14 2:03 ` Junio C Hamano
2017-11-10 19:05 ` [PATCH 05/30] directory rename detection: directory splitting testcases Elijah Newren
2017-11-13 23:20 ` Stefan Beller
2017-11-10 19:05 ` [PATCH 06/30] directory rename detection: testcases to avoid taking detection too far Elijah Newren
2017-11-13 23:25 ` Stefan Beller
2017-11-14 1:02 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 07/30] directory rename detection: partially renamed directory testcase/discussion Elijah Newren
2017-11-14 0:07 ` Stefan Beller
2017-11-10 19:05 ` [PATCH 08/30] directory rename detection: files/directories in the way of some renames Elijah Newren
2017-11-14 0:15 ` Stefan Beller
2017-11-14 1:19 ` Elijah Newren
2017-11-10 19:05 ` Elijah Newren [this message]
2017-11-14 0:25 ` [PATCH 09/30] directory rename detection: testcases checking which side did the rename Stefan Beller
2017-11-14 1:30 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 10/30] directory rename detection: more involved edge/corner testcases Elijah Newren
2017-11-14 0:42 ` Stefan Beller
2017-11-14 21:11 ` Elijah Newren
2017-11-14 22:47 ` Stefan Beller
2017-11-10 19:05 ` [PATCH 11/30] directory rename detection: testcases exploring possibly suboptimal merges Elijah Newren
2017-11-14 20:33 ` Stefan Beller
2017-11-14 21:42 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 12/30] directory rename detection: miscellaneous testcases to complete coverage Elijah Newren
2017-11-15 20:03 ` Stefan Beller
2017-11-16 21:17 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 13/30] directory rename detection: tests for handling overwriting untracked files Elijah Newren
2017-11-10 19:05 ` [PATCH 14/30] directory rename detection: tests for handling overwriting dirty files Elijah Newren
2017-11-10 19:05 ` [PATCH 15/30] merge-recursive: Move the get_renames() function Elijah Newren
2017-11-14 4:46 ` Junio C Hamano
2017-11-14 17:41 ` Elijah Newren
2017-11-15 1:20 ` Junio C Hamano
2017-11-10 19:05 ` [PATCH 16/30] merge-recursive: Introduce new functions to handle rename logic Elijah Newren
2017-11-14 4:56 ` Junio C Hamano
2017-11-14 5:14 ` Junio C Hamano
2017-11-14 18:24 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 17/30] merge-recursive: Fix leaks of allocated renames and diff_filepairs Elijah Newren
2017-11-14 4:58 ` Junio C Hamano
2017-11-10 19:05 ` [PATCH 18/30] merge-recursive: Make !o->detect_rename codepath more obvious Elijah Newren
2017-11-10 19:05 ` [PATCH 19/30] merge-recursive: Split out code for determining diff_filepairs Elijah Newren
2017-11-14 5:20 ` Junio C Hamano
2017-11-10 19:05 ` [PATCH 20/30] merge-recursive: Add a new hashmap for storing directory renames Elijah Newren
2017-11-10 19:05 ` [PATCH 21/30] merge-recursive: Add get_directory_renames() Elijah Newren
2017-11-14 5:30 ` Junio C Hamano
2017-11-14 18:38 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 22/30] merge-recursive: Check for directory level conflicts Elijah Newren
2017-11-10 19:05 ` [PATCH 23/30] merge-recursive: Add a new hashmap for storing file collisions Elijah Newren
2017-11-10 19:05 ` [PATCH 24/30] merge-recursive: Add computation of collisions due to dir rename & merging Elijah Newren
2018-06-10 10:56 ` René Scharfe
2018-06-10 11:03 ` René Scharfe
2018-06-10 20:44 ` Jeff King
2018-06-11 15:03 ` Elijah Newren
2018-06-14 17:36 ` Junio C Hamano
2017-11-10 19:05 ` [PATCH 25/30] merge-recursive: Check for file level conflicts then get new name Elijah Newren
2017-11-10 19:05 ` [PATCH 26/30] merge-recursive: When comparing files, don't include trees Elijah Newren
2017-11-10 19:05 ` [PATCH 27/30] merge-recursive: Apply necessary modifications for directory renames Elijah Newren
2017-11-15 20:23 ` Stefan Beller
2017-11-16 3:54 ` Elijah Newren
2017-11-10 19:05 ` [PATCH 28/30] merge-recursive: Avoid clobbering untracked files with " Elijah Newren
2017-11-10 19:05 ` [RFC PATCH 29/30] merge-recursive: Fix overwriting dirty files involved in renames Elijah Newren
2017-11-10 19:05 ` [PATCH 30/30] merge-recursive: Fix remaining directory rename + dirty overwrite cases Elijah Newren
2017-11-10 22:27 ` [PATCH 00/30] Add directory rename detection to git Philip Oakley
2017-11-10 23:26 ` Elijah Newren
2017-11-13 15:04 ` Philip Oakley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171110190550.27059-10-newren@gmail.com \
--to=newren@gmail.com \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).