From: larsxschneider@gmail.com
To: git@vger.kernel.org
Cc: peff@peff.net, gitster@pobox.com, sbeller@google.com,
Johannes.Schindelin@gmx.de, jnareb@gmail.com, mlbright@gmail.com,
tboegi@web.de, jacob.keller@gmail.com,
Lars Schneider <larsxschneider@gmail.com>
Subject: [PATCH v7 08/10] convert: modernize tests
Date: Thu, 8 Sep 2016 20:21:30 +0200 [thread overview]
Message-ID: <20160908182132.50788-9-larsxschneider@gmail.com> (raw)
In-Reply-To: <20160908182132.50788-1-larsxschneider@gmail.com>
From: Lars Schneider <larsxschneider@gmail.com>
Use `test_config` to set the config, check that files are empty with
`test_must_be_empty`, compare files with `test_cmp`, and remove spaces
after ">" and "<".
Please note that the "rot13" filter configured in "setup" keeps using
`git config` instead of `test_config` because subsequent tests might
depend on it.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
---
t/t0021-conversion.sh | 58 +++++++++++++++++++++++++--------------------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh
index e799e59..dc50938 100755
--- a/t/t0021-conversion.sh
+++ b/t/t0021-conversion.sh
@@ -38,8 +38,8 @@ script='s/^\$Id: \([0-9a-f]*\) \$/\1/p'
test_expect_success check '
- cmp test.o test &&
- cmp test.o test.t &&
+ test_cmp test.o test &&
+ test_cmp test.o test.t &&
# ident should be stripped in the repository
git diff --raw --exit-code :test :test.i &&
@@ -47,10 +47,10 @@ test_expect_success check '
embedded=$(sed -ne "$script" test.i) &&
test "z$id" = "z$embedded" &&
- git cat-file blob :test.t > test.r &&
+ git cat-file blob :test.t >test.r &&
- ./rot13.sh < test.o > test.t &&
- cmp test.r test.t
+ ./rot13.sh <test.o >test.t &&
+ test_cmp test.r test.t
'
# If an expanded ident ever gets into the repository, we want to make sure that
@@ -130,7 +130,7 @@ test_expect_success 'filter shell-escaped filenames' '
# delete the files and check them out again, using a smudge filter
# that will count the args and echo the command-line back to us
- git config filter.argc.smudge "sh ./argc.sh %f" &&
+ test_config filter.argc.smudge "sh ./argc.sh %f" &&
rm "$normal" "$special" &&
git checkout -- "$normal" "$special" &&
@@ -141,7 +141,7 @@ test_expect_success 'filter shell-escaped filenames' '
test_cmp expect "$special" &&
# do the same thing, but with more args in the filter expression
- git config filter.argc.smudge "sh ./argc.sh %f --my-extra-arg" &&
+ test_config filter.argc.smudge "sh ./argc.sh %f --my-extra-arg" &&
rm "$normal" "$special" &&
git checkout -- "$normal" "$special" &&
@@ -154,9 +154,9 @@ test_expect_success 'filter shell-escaped filenames' '
'
test_expect_success 'required filter should filter data' '
- git config filter.required.smudge ./rot13.sh &&
- git config filter.required.clean ./rot13.sh &&
- git config filter.required.required true &&
+ test_config filter.required.smudge ./rot13.sh &&
+ test_config filter.required.clean ./rot13.sh &&
+ test_config filter.required.required true &&
echo "*.r filter=required" >.gitattributes &&
@@ -165,17 +165,17 @@ test_expect_success 'required filter should filter data' '
rm -f test.r &&
git checkout -- test.r &&
- cmp test.o test.r &&
+ test_cmp test.o test.r &&
./rot13.sh <test.o >expected &&
git cat-file blob :test.r >actual &&
- cmp expected actual
+ test_cmp expected actual
'
test_expect_success 'required filter smudge failure' '
- git config filter.failsmudge.smudge false &&
- git config filter.failsmudge.clean cat &&
- git config filter.failsmudge.required true &&
+ test_config filter.failsmudge.smudge false &&
+ test_config filter.failsmudge.clean cat &&
+ test_config filter.failsmudge.required true &&
echo "*.fs filter=failsmudge" >.gitattributes &&
@@ -186,9 +186,9 @@ test_expect_success 'required filter smudge failure' '
'
test_expect_success 'required filter clean failure' '
- git config filter.failclean.smudge cat &&
- git config filter.failclean.clean false &&
- git config filter.failclean.required true &&
+ test_config filter.failclean.smudge cat &&
+ test_config filter.failclean.clean false &&
+ test_config filter.failclean.required true &&
echo "*.fc filter=failclean" >.gitattributes &&
@@ -197,8 +197,8 @@ test_expect_success 'required filter clean failure' '
'
test_expect_success 'filtering large input to small output should use little memory' '
- git config filter.devnull.clean "cat >/dev/null" &&
- git config filter.devnull.required true &&
+ test_config filter.devnull.clean "cat >/dev/null" &&
+ test_config filter.devnull.required true &&
for i in $(test_seq 1 30); do printf "%1048576d" 1; done >30MB &&
echo "30MB filter=devnull" >.gitattributes &&
GIT_MMAP_LIMIT=1m GIT_ALLOC_LIMIT=1m git add 30MB
@@ -207,7 +207,7 @@ test_expect_success 'filtering large input to small output should use little mem
test_expect_success 'filter that does not read is fine' '
test-genrandom foo $((128 * 1024 + 1)) >big &&
echo "big filter=epipe" >.gitattributes &&
- git config filter.epipe.clean "echo xyzzy" &&
+ test_config filter.epipe.clean "echo xyzzy" &&
git add big &&
git cat-file blob :big >actual &&
echo xyzzy >expect &&
@@ -215,20 +215,20 @@ test_expect_success 'filter that does not read is fine' '
'
test_expect_success EXPENSIVE 'filter large file' '
- git config filter.largefile.smudge cat &&
- git config filter.largefile.clean cat &&
+ test_config filter.largefile.smudge cat &&
+ test_config filter.largefile.clean cat &&
for i in $(test_seq 1 2048); do printf "%1048576d" 1; done >2GB &&
echo "2GB filter=largefile" >.gitattributes &&
git add 2GB 2>err &&
- ! test -s err &&
+ test_must_be_empty err &&
rm -f 2GB &&
git checkout -- 2GB 2>err &&
- ! test -s err
+ test_must_be_empty err
'
test_expect_success "filter: clean empty file" '
- git config filter.in-repo-header.clean "echo cleaned && cat" &&
- git config filter.in-repo-header.smudge "sed 1d" &&
+ test_config filter.in-repo-header.clean "echo cleaned && cat" &&
+ test_config filter.in-repo-header.smudge "sed 1d" &&
echo "empty-in-worktree filter=in-repo-header" >>.gitattributes &&
>empty-in-worktree &&
@@ -240,8 +240,8 @@ test_expect_success "filter: clean empty file" '
'
test_expect_success "filter: smudge empty file" '
- git config filter.empty-in-repo.clean "cat >/dev/null" &&
- git config filter.empty-in-repo.smudge "echo smudged && cat" &&
+ test_config filter.empty-in-repo.clean "cat >/dev/null" &&
+ test_config filter.empty-in-repo.smudge "echo smudged && cat" &&
echo "empty-in-repo filter=empty-in-repo" >>.gitattributes &&
echo dead data walking >empty-in-repo &&
--
2.10.0
next prev parent reply other threads:[~2016-09-08 18:22 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-08 18:21 [PATCH v7 00/10] Git filter protocol larsxschneider
2016-09-08 18:21 ` [PATCH v7 01/10] pkt-line: rename packet_write() to packet_write_fmt() larsxschneider
2016-09-08 18:21 ` [PATCH v7 02/10] pkt-line: extract set_packet_header() larsxschneider
2016-09-08 18:21 ` [PATCH v7 03/10] pkt-line: add packet_write_fmt_gently() larsxschneider
2016-09-08 21:18 ` Stefan Beller
2016-09-11 11:36 ` Lars Schneider
2016-09-11 16:01 ` Stefan Beller
2016-09-12 9:22 ` Lars Schneider
2016-09-08 18:21 ` [PATCH v7 04/10] pkt-line: add packet_flush_gently() larsxschneider
2016-09-12 23:30 ` Junio C Hamano
2016-09-13 22:12 ` Lars Schneider
2016-09-13 22:44 ` Junio C Hamano
2016-09-15 16:42 ` Lars Schneider
2016-09-15 19:44 ` Jeff King
2016-09-15 20:19 ` Lars Schneider
2016-09-15 20:33 ` Junio C Hamano
2016-09-08 18:21 ` [PATCH v7 05/10] pkt-line: add packet_write_gently() larsxschneider
2016-09-08 21:24 ` Stefan Beller
2016-09-11 11:44 ` Lars Schneider
2016-09-12 23:31 ` Junio C Hamano
2016-09-08 18:21 ` [PATCH v7 06/10] pkt-line: add functions to read/write flush terminated packet streams larsxschneider
2016-09-08 21:49 ` Stefan Beller
2016-09-11 12:33 ` Lars Schneider
2016-09-11 16:03 ` Stefan Beller
2016-09-11 21:42 ` Junio C Hamano
2016-09-08 18:21 ` [PATCH v7 07/10] convert: quote filter names in error messages larsxschneider
2016-09-08 18:21 ` larsxschneider [this message]
2016-09-08 22:05 ` [PATCH v7 08/10] convert: modernize tests Stefan Beller
2016-09-11 12:34 ` Lars Schneider
2016-09-08 18:21 ` [PATCH v7 09/10] convert: make apply_filter() adhere to standard Git error handling larsxschneider
2016-09-08 18:21 ` [PATCH v7 10/10] convert: add filter.<driver>.process option larsxschneider
2016-09-10 6:29 ` Torsten Bögershausen
2016-09-12 9:49 ` Lars Schneider
2016-09-13 14:44 ` Torsten Bögershausen
2016-09-13 16:42 ` Junio C Hamano
2016-09-15 17:23 ` Lars Schneider
2016-09-15 20:04 ` Junio C Hamano
2016-09-29 6:33 ` Torsten Bögershausen
2016-09-29 9:37 ` Jakub Narębski
2016-09-10 16:40 ` Torsten Bögershausen
2016-09-13 22:04 ` Lars Schneider
2016-09-13 15:22 ` Junio C Hamano
2016-09-15 20:16 ` Lars Schneider
2016-09-15 20:24 ` Junio C Hamano
2016-09-13 16:00 ` [PATCH v7 00/10] Git filter protocol Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160908182132.50788-9-larsxschneider@gmail.com \
--to=larsxschneider@gmail.com \
--cc=Johannes.Schindelin@gmx.de \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=jacob.keller@gmail.com \
--cc=jnareb@gmail.com \
--cc=mlbright@gmail.com \
--cc=peff@peff.net \
--cc=sbeller@google.com \
--cc=tboegi@web.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).