[PATCH v10 00/40] libify apply and use lib in am, part 2

[PATCH v10 00/40] libify apply and use lib in am, part 2

[Christian Couder]

Goal
~~~~

This is a patch series about libifying `git apply` functionality, and
using this libified functionality in `git am`, so that no 'git apply'
process is spawn anymore. This makes `git am` significantly faster, so
`git rebase`, when it uses the am backend, is also significantly
faster.

Previous discussions and patches series
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This has initially been discussed in the following thread:

  http://thread.gmane.org/gmane.comp.version-control.git/287236/

Then the following patch series were sent:

RFC: http://thread.gmane.org/gmane.comp.version-control.git/288489/
v1: http://thread.gmane.org/gmane.comp.version-control.git/292324/
v2: http://thread.gmane.org/gmane.comp.version-control.git/294248/
v3: http://thread.gmane.org/gmane.comp.version-control.git/295429/
v4: http://thread.gmane.org/gmane.comp.version-control.git/296350/
v5: http://thread.gmane.org/gmane.comp.version-control.git/296490/
v6: http://thread.gmane.org/gmane.comp.version-control.git/297024/
v7: http://thread.gmane.org/gmane.comp.version-control.git/297193/
v8: https://public-inbox.org/git/20160627182429.31550-1-chriscool%40tuxfamily.org/
v9: https://public-inbox.org/git/20160730172509.22939-1-chriscool%40tuxfamily.org/

Highlevel view of the patches in the series
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is "part 2" of the full patch series. This is built on top of the
"part 1" and as the "part 1" is now in "master", this "part 2" is
built on top of "master".

  - Patch 01/40 was in v8 and v9, and hasn't changed.

It renames some structs and constants that will be moved into apply.h
to give them a more specific name.

  - Patches 02/40 to 31/40 were in v1, v2, v6, v7, v8 and v9.

They finish libifying the apply functionality that was in
builtin/apply.c and move it into apply.{c,h}, but the libified
functionality is not yet used in `git am`.

There are a few minor changes in these patches. In 04/40 we now
consider that we have an error if read_patch_file() returns a negative
integer instead of just a non 0 integer, as Stefan suggested. In 26/40
we now use write_in_full() instead of write_or_whine_pipe(), as
suggested by Peff.

  - Patch 32/40 was in v6, v7, v8 and v9, and hasn't changed.

It replaces some calls to error() with calls to error_errno().

  - Patch 33/40 was in v2, v6, v7, v8 and v9.

It makes it possible to temporarily change the current index.

This is a hack to make it possible for `git am` to use the libified
apply functionality on a different index file.

`git am` used to do that by setting the GIT_INDEX_FILE env variable
before calling `git apply`.

The commit message has been improved again to explain more why we are
using this short cut and more comments have been added, especially in
apply.h, as suggested by Junio and Stefan.

  - Patches 34/40 to 38/40 were in v2, v6, v7, v8 and v9.

They implement a way to make the libified apply code silent by
changing the bool `apply_verbosely` into a tristate enum called
`apply_verbosity`, that can be one of `verbosity_verbose`,
`verbosity_normal` or `verbosity_silent`.

This is because "git am", since it was a shell script, has been
silencing the apply functionality by redirecting file descriptors to
/dev/null, but this is not acceptable in C.

The most significant change in these patches is that one patch (34/41
in v9: write_or_die: use warning() instead of fprintf(stderr, ...))
has been removed, as it was not needed anymore, since we don't use
write_or_whine_pipe(), as suggested by Peff.

Another change is that in 34/40, a spurious coma has been removed just
after the last element in an enum, as suggested by Junio.

The last change is that a comment has been improved in 38/40 as
suggested by Stefan.

  - Patch 39/40 was new in v9.

It refactors `git apply` option parsing to make it possible for `git
am` to easily pass some command line options to the libified applied
code as suggested by Junio.

Compared to v9, we now remove some useless function declarations from
"apply.h", and make the related functions static again in "apply.c",
as suggested by Ramsay.

  - Patch 40/40 was in v1, v2, v6, v7, v8 and v9, and hasn't changed.

This patch makes `git am` use the libified functionality. It now uses
the refactored code from the new patch 40/40 to parse `git apply`
options.


General comments
~~~~~~~~~~~~~~~~

Sorry if this patch series is still long. Hopefully the early part of
this series until 32/40 will be ready soon to be moved to next and
master, and I may only need to resend the rest.

I will send a diff between this version and the previous one, as a
reply to this email.

The benefits are not just related to not creating new processes. When
`git am` launched a `git apply` process, this new process had to read
the index from disk. Then after the `git apply`process had terminated,
`git am` dropped its index and read the index from disk to get the
index that had been modified by the `git apply`process. This was
inefficient and also prevented the split-index mechanism to provide
many performance benefits.

By the way, current work is ongoing to make it possible to use
split-index more easily by adding a config variable, see:

https://public-inbox.org/git/20160711172254.13439-1-chriscool%40tuxfamily.org/

Using an earlier version of this series as rebase material, Duy
explained split-index benefits along with this patch series like this:

 > Without the series, the picture is not so surprising. We run git-apply
 > 80+ times, each consists of this sequence
 >
 > read index
 > write index (cache tree updates only)
 > read index again
 > optionally initialize name hash (when new entries are added, I guess)
 > read packed-refs
 > write index
 >
 > With this series, we run a single git-apply which does
 >
 > read index (and sharedindex too if in split-index mode)
 > initialize name hash
 > write index 80+ times

(See: http://thread.gmane.org/gmane.comp.version-control.git/292324/focus=292460)

Links
~~~~~

This patch series is available here:

https://github.com/chriscool/git/commits/libify-apply-use-in-am

The previous versions are available there:

v1: https://github.com/chriscool/git/commits/libify-apply-use-in-am25 
v2: https://github.com/chriscool/git/commits/libify-apply-use-in-am54
v6: https://github.com/chriscool/git/commits/libify-apply-use-in-am65
v7: https://github.com/chriscool/git/commits/libify-apply-use-in-am75
v8: https://github.com/chriscool/git/commits/libify-apply-use-in-am97
v9: https://github.com/chriscool/git/commits/libify-apply-use-in-am106

Performance numbers
~~~~~~~~~~~~~~~~~~~

Numbers are only available for tests that have been performed on Linux
using a very early version of this series, though Johannes Sixt
reported great improvements on Windows. It could be interesting to get
detailed numbers on other platforms like Windows and OSX.

  - Around mid April Ævar did a huge many-hundred commit rebase on the
    kernel with untracked cache.

command: git rebase --onto 1993b17 52bef0c 29dde7c

Vanilla "next" without split index:                1m54.953s
Vanilla "next" with split index:                   1m22.476s
This series on top of "next" without split index:  1m12.034s
This series on top of "next" with split index:     0m15.678s

Ævar used his Debian laptop with SSD.

  - Around mid April I tested rebasing 13 commits in Booking.com's
    monorepo on a Red Hat 6.5 server with split-index and
    GIT_TRACE_PERFORMANCE=1.

With Git v2.8.0, the rebase took 6.375888383 s, with the git am
command launched by the rebase command taking 3.705677431 s.

With this series on top of next, the rebase took 3.044529494 s, with
the git am command launched by the rebase command taking 0.583521168
s.


Christian Couder (40):
  apply: make some names more specific
  apply: move 'struct apply_state' to apply.h
  builtin/apply: make apply_patch() return -1 or -128 instead of
    die()ing
  builtin/apply: read_patch_file() return -1 instead of die()ing
  builtin/apply: make find_header() return -128 instead of die()ing
  builtin/apply: make parse_chunk() return a negative integer on error
  builtin/apply: make parse_single_patch() return -1 on error
  builtin/apply: make parse_whitespace_option() return -1 instead of
    die()ing
  builtin/apply: make parse_ignorewhitespace_option() return -1 instead
    of die()ing
  builtin/apply: move init_apply_state() to apply.c
  apply: make init_apply_state() return -1 instead of exit()ing
  builtin/apply: make check_apply_state() return -1 instead of die()ing
  builtin/apply: move check_apply_state() to apply.c
  builtin/apply: make apply_all_patches() return 128 or 1 on error
  builtin/apply: make parse_traditional_patch() return -1 on error
  builtin/apply: make gitdiff_*() return 1 at end of header
  builtin/apply: make gitdiff_*() return -1 on error
  builtin/apply: change die_on_unsafe_path() to check_unsafe_path()
  builtin/apply: make build_fake_ancestor() return -1 on error
  builtin/apply: make remove_file() return -1 on error
  builtin/apply: make add_conflicted_stages_file() return -1 on error
  builtin/apply: make add_index_file() return -1 on error
  builtin/apply: make create_file() return -1 on error
  builtin/apply: make write_out_one_result() return -1 on error
  builtin/apply: make write_out_results() return -1 on error
  builtin/apply: make try_create_file() return -1 on error
  builtin/apply: make create_one_file() return -1 on error
  builtin/apply: rename option parsing functions
  apply: rename and move opt constants to apply.h
  Move libified code from builtin/apply.c to apply.{c,h}
  apply: make some parsing functions static again
  apply: use error_errno() where possible
  environment: add set_index_file()
  apply: make it possible to silently apply
  apply: don't print on stdout in verbosity_silent mode
  usage: add set_warn_routine()
  usage: add get_error_routine() and get_warn_routine()
  apply: change error_routine when silent
  apply: refactor `git apply` option parsing
  builtin/am: use apply api in run_apply()

 Makefile               |    1 +
 apply.c                | 4972 ++++++++++++++++++++++++++++++++++++++++++++++++
 apply.h                |  132 ++
 builtin/am.c           |   65 +-
 builtin/apply.c        | 4873 +----------------------------------------------
 cache.h                |   13 +
 environment.c          |   16 +
 git-compat-util.h      |    3 +
 t/t4012-diff-binary.sh |    4 +-
 t/t4254-am-corrupt.sh  |    2 +-
 usage.c                |   15 +
 11 files changed, 5217 insertions(+), 4879 deletions(-)
 create mode 100644 apply.c
 create mode 100644 apply.h

-- 
2.9.2.614.g4980f51

[PATCH v10 01/40] apply: make some names more specific

[Christian Couder]

To prepare for some structs and constants being moved from
builtin/apply.c to apply.h, we should give them some more
specific names to avoid possible name collisions in th global
namespace.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 1a488f9..ab8f0bd 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -21,7 +21,7 @@
 #include "ll-merge.h"
 #include "rerere.h"
 
-enum ws_error_action {
+enum apply_ws_error_action {
 	nowarn_ws_error,
 	warn_on_ws_error,
 	die_on_ws_error,
@@ -29,7 +29,7 @@ enum ws_error_action {
 };
 
 
-enum ws_ignore {
+enum apply_ws_ignore {
 	ignore_ws_none,
 	ignore_ws_change
 };
@@ -45,8 +45,8 @@ enum ws_ignore {
  * See also "struct string_list symlink_changes" in "struct
  * apply_state".
  */
-#define SYMLINK_GOES_AWAY 01
-#define SYMLINK_IN_RESULT 02
+#define APPLY_SYMLINK_GOES_AWAY 01
+#define APPLY_SYMLINK_IN_RESULT 02
 
 struct apply_state {
 	const char *prefix;
@@ -110,8 +110,8 @@ struct apply_state {
 	struct string_list fn_table;
 
 	/* These control whitespace errors */
-	enum ws_error_action ws_error_action;
-	enum ws_ignore ws_ignore_action;
+	enum apply_ws_error_action ws_error_action;
+	enum apply_ws_ignore ws_ignore_action;
 	const char *whitespace_option;
 	int whitespace_error;
 	int squelch_whitespace_errors;
@@ -3750,11 +3750,11 @@ static void prepare_symlink_changes(struct apply_state *state, struct patch *pat
 		if ((patch->old_name && S_ISLNK(patch->old_mode)) &&
 		    (patch->is_rename || patch->is_delete))
 			/* the symlink at patch->old_name is removed */
-			register_symlink_changes(state, patch->old_name, SYMLINK_GOES_AWAY);
+			register_symlink_changes(state, patch->old_name, APPLY_SYMLINK_GOES_AWAY);
 
 		if (patch->new_name && S_ISLNK(patch->new_mode))
 			/* the symlink at patch->new_name is created or remains */
-			register_symlink_changes(state, patch->new_name, SYMLINK_IN_RESULT);
+			register_symlink_changes(state, patch->new_name, APPLY_SYMLINK_IN_RESULT);
 	}
 }
 
@@ -3769,9 +3769,9 @@ static int path_is_beyond_symlink_1(struct apply_state *state, struct strbuf *na
 			break;
 		name->buf[name->len] = '\0';
 		change = check_symlink_changes(state, name->buf);
-		if (change & SYMLINK_IN_RESULT)
+		if (change & APPLY_SYMLINK_IN_RESULT)
 			return 1;
-		if (change & SYMLINK_GOES_AWAY)
+		if (change & APPLY_SYMLINK_GOES_AWAY)
 			/*
 			 * This cannot be "return 0", because we may
 			 * see a new one created at a higher level.
-- 
2.9.2.614.g4980f51

Re: [PATCH v10 01/40] apply: make some names more specific

[stefan.naewe]

Am 08.08.2016 um 23:02 schrieb Christian Couder:
> To prepare for some structs and constants being moved from
> builtin/apply.c to apply.h, we should give them some more
> specific names to avoid possible name collisions in th global

s/th/the/

> namespace.
> 
> Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
> ---
>  builtin/apply.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/builtin/apply.c b/builtin/apply.c
> index 1a488f9..ab8f0bd 100644
> --- a/builtin/apply.c
> +++ b/builtin/apply.c
> @@ -21,7 +21,7 @@
>  #include "ll-merge.h"
>  #include "rerere.h"
>  
> -enum ws_error_action {
> +enum apply_ws_error_action {
>  	nowarn_ws_error,
>  	warn_on_ws_error,
>  	die_on_ws_error,
> @@ -29,7 +29,7 @@ enum ws_error_action {
>  };
>  
>  
> -enum ws_ignore {
> +enum apply_ws_ignore {
>  	ignore_ws_none,
>  	ignore_ws_change
>  };
> @@ -45,8 +45,8 @@ enum ws_ignore {
>   * See also "struct string_list symlink_changes" in "struct
>   * apply_state".
>   */
> -#define SYMLINK_GOES_AWAY 01
> -#define SYMLINK_IN_RESULT 02
> +#define APPLY_SYMLINK_GOES_AWAY 01
> +#define APPLY_SYMLINK_IN_RESULT 02
>  
>  struct apply_state {
>  	const char *prefix;
> @@ -110,8 +110,8 @@ struct apply_state {
>  	struct string_list fn_table;
>  
>  	/* These control whitespace errors */
> -	enum ws_error_action ws_error_action;
> -	enum ws_ignore ws_ignore_action;
> +	enum apply_ws_error_action ws_error_action;
> +	enum apply_ws_ignore ws_ignore_action;
>  	const char *whitespace_option;
>  	int whitespace_error;
>  	int squelch_whitespace_errors;
> @@ -3750,11 +3750,11 @@ static void prepare_symlink_changes(struct apply_state *state, struct patch *pat
>  		if ((patch->old_name && S_ISLNK(patch->old_mode)) &&
>  		    (patch->is_rename || patch->is_delete))
>  			/* the symlink at patch->old_name is removed */
> -			register_symlink_changes(state, patch->old_name, SYMLINK_GOES_AWAY);
> +			register_symlink_changes(state, patch->old_name, APPLY_SYMLINK_GOES_AWAY);
>  
>  		if (patch->new_name && S_ISLNK(patch->new_mode))
>  			/* the symlink at patch->new_name is created or remains */
> -			register_symlink_changes(state, patch->new_name, SYMLINK_IN_RESULT);
> +			register_symlink_changes(state, patch->new_name, APPLY_SYMLINK_IN_RESULT);
>  	}
>  }
>  
> @@ -3769,9 +3769,9 @@ static int path_is_beyond_symlink_1(struct apply_state *state, struct strbuf *na
>  			break;
>  		name->buf[name->len] = '\0';
>  		change = check_symlink_changes(state, name->buf);
> -		if (change & SYMLINK_IN_RESULT)
> +		if (change & APPLY_SYMLINK_IN_RESULT)
>  			return 1;
> -		if (change & SYMLINK_GOES_AWAY)
> +		if (change & APPLY_SYMLINK_GOES_AWAY)
>  			/*
>  			 * This cannot be "return 0", because we may
>  			 * see a new one created at a higher level.
> 

Stefan
-- 
----------------------------------------------------------------
/dev/random says: Don't be so humble, you're not that great. -Golda Meir
python -c "print '73746566616e2e6e616577654061746c61732d656c656b74726f6e696b2e636f6d'.decode('hex')" 
GPG Key fingerprint = 2DF5 E01B 09C3 7501 BCA9  9666 829B 49C5 9221 27AF

Re: [PATCH v10 01/40] apply: make some names more specific

[Christian Couder]

On Tue, Aug 9, 2016 at 4:51 PM,  <stefan.naewe@atlas-elektronik.com> wrote:
> Am 08.08.2016 um 23:02 schrieb Christian Couder:
>> To prepare for some structs and constants being moved from
>> builtin/apply.c to apply.h, we should give them some more
>> specific names to avoid possible name collisions in th global
>
> s/th/the/
>
>> namespace.

Thanks. I will send an update with only a new version of this patch
and of 28/40.

Re: [PATCH v10 01/40] apply: make some names more specific

[stefan.naewe]

Am 11.08.2016 um 10:40 schrieb Christian Couder:
> On Tue, Aug 9, 2016 at 4:51 PM,  <stefan.naewe@atlas-elektronik.com> wrote:
>> Am 08.08.2016 um 23:02 schrieb Christian Couder:
>>> To prepare for some structs and constants being moved from
>>> builtin/apply.c to apply.h, we should give them some more
>>> specific names to avoid possible name collisions in th global
>>
>> s/th/the/
>>
>>> namespace.
> 
> Thanks. I will send an update with only a new version of this patch
> and of 28/40.
> 

There's another lowercase 'api' in patch 40

Stefan
-- 
----------------------------------------------------------------
/dev/random says: Tis better to have loved and lost than just to have lost.
python -c "print '73746566616e2e6e616577654061746c61732d656c656b74726f6e696b2e636f6d'.decode('hex')" 
GPG Key fingerprint = 2DF5 E01B 09C3 7501 BCA9  9666 829B 49C5 9221 27AF

[PATCH v10 02/40] apply: move 'struct apply_state' to apply.h

[Christian Couder]

To libify `git apply` functionality we must make 'struct apply_state'
usable outside "builtin/apply.c".

Let's do that by creating a new "apply.h" and moving
'struct apply_state' there.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.h         | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 builtin/apply.c |  98 +-----------------------------------------------------
 2 files changed, 101 insertions(+), 97 deletions(-)
 create mode 100644 apply.h

diff --git a/apply.h b/apply.h
new file mode 100644
index 0000000..7493a40
--- /dev/null
+++ b/apply.h
@@ -0,0 +1,100 @@
+#ifndef APPLY_H
+#define APPLY_H
+
+enum apply_ws_error_action {
+	nowarn_ws_error,
+	warn_on_ws_error,
+	die_on_ws_error,
+	correct_ws_error
+};
+
+enum apply_ws_ignore {
+	ignore_ws_none,
+	ignore_ws_change
+};
+
+/*
+ * We need to keep track of how symlinks in the preimage are
+ * manipulated by the patches.  A patch to add a/b/c where a/b
+ * is a symlink should not be allowed to affect the directory
+ * the symlink points at, but if the same patch removes a/b,
+ * it is perfectly fine, as the patch removes a/b to make room
+ * to create a directory a/b so that a/b/c can be created.
+ *
+ * See also "struct string_list symlink_changes" in "struct
+ * apply_state".
+ */
+#define APPLY_SYMLINK_GOES_AWAY 01
+#define APPLY_SYMLINK_IN_RESULT 02
+
+struct apply_state {
+	const char *prefix;
+	int prefix_length;
+
+	/* These are lock_file related */
+	struct lock_file *lock_file;
+	int newfd;
+
+	/* These control what gets looked at and modified */
+	int apply; /* this is not a dry-run */
+	int cached; /* apply to the index only */
+	int check; /* preimage must match working tree, don't actually apply */
+	int check_index; /* preimage must match the indexed version */
+	int update_index; /* check_index && apply */
+
+	/* These control cosmetic aspect of the output */
+	int diffstat; /* just show a diffstat, and don't actually apply */
+	int numstat; /* just show a numeric diffstat, and don't actually apply */
+	int summary; /* just report creation, deletion, etc, and don't actually apply */
+
+	/* These boolean parameters control how the apply is done */
+	int allow_overlap;
+	int apply_in_reverse;
+	int apply_with_reject;
+	int apply_verbosely;
+	int no_add;
+	int threeway;
+	int unidiff_zero;
+	int unsafe_paths;
+
+	/* Other non boolean parameters */
+	const char *fake_ancestor;
+	const char *patch_input_file;
+	int line_termination;
+	struct strbuf root;
+	int p_value;
+	int p_value_known;
+	unsigned int p_context;
+
+	/* Exclude and include path parameters */
+	struct string_list limit_by_name;
+	int has_include;
+
+	/* Various "current state" */
+	int linenr; /* current line number */
+	struct string_list symlink_changes; /* we have to track symlinks */
+
+	/*
+	 * For "diff-stat" like behaviour, we keep track of the biggest change
+	 * we've seen, and the longest filename. That allows us to do simple
+	 * scaling.
+	 */
+	int max_change;
+	int max_len;
+
+	/*
+	 * Records filenames that have been touched, in order to handle
+	 * the case where more than one patches touch the same file.
+	 */
+	struct string_list fn_table;
+
+	/* These control whitespace errors */
+	enum apply_ws_error_action ws_error_action;
+	enum apply_ws_ignore ws_ignore_action;
+	const char *whitespace_option;
+	int whitespace_error;
+	int squelch_whitespace_errors;
+	int applied_after_fixing_ws;
+};
+
+#endif
diff --git a/builtin/apply.c b/builtin/apply.c
index ab8f0bd..ed923ca 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -20,103 +20,7 @@
 #include "xdiff-interface.h"
 #include "ll-merge.h"
 #include "rerere.h"
-
-enum apply_ws_error_action {
-	nowarn_ws_error,
-	warn_on_ws_error,
-	die_on_ws_error,
-	correct_ws_error
-};
-
-
-enum apply_ws_ignore {
-	ignore_ws_none,
-	ignore_ws_change
-};
-
-/*
- * We need to keep track of how symlinks in the preimage are
- * manipulated by the patches.  A patch to add a/b/c where a/b
- * is a symlink should not be allowed to affect the directory
- * the symlink points at, but if the same patch removes a/b,
- * it is perfectly fine, as the patch removes a/b to make room
- * to create a directory a/b so that a/b/c can be created.
- *
- * See also "struct string_list symlink_changes" in "struct
- * apply_state".
- */
-#define APPLY_SYMLINK_GOES_AWAY 01
-#define APPLY_SYMLINK_IN_RESULT 02
-
-struct apply_state {
-	const char *prefix;
-	int prefix_length;
-
-	/* These are lock_file related */
-	struct lock_file *lock_file;
-	int newfd;
-
-	/* These control what gets looked at and modified */
-	int apply; /* this is not a dry-run */
-	int cached; /* apply to the index only */
-	int check; /* preimage must match working tree, don't actually apply */
-	int check_index; /* preimage must match the indexed version */
-	int update_index; /* check_index && apply */
-
-	/* These control cosmetic aspect of the output */
-	int diffstat; /* just show a diffstat, and don't actually apply */
-	int numstat; /* just show a numeric diffstat, and don't actually apply */
-	int summary; /* just report creation, deletion, etc, and don't actually apply */
-
-	/* These boolean parameters control how the apply is done */
-	int allow_overlap;
-	int apply_in_reverse;
-	int apply_with_reject;
-	int apply_verbosely;
-	int no_add;
-	int threeway;
-	int unidiff_zero;
-	int unsafe_paths;
-
-	/* Other non boolean parameters */
-	const char *fake_ancestor;
-	const char *patch_input_file;
-	int line_termination;
-	struct strbuf root;
-	int p_value;
-	int p_value_known;
-	unsigned int p_context;
-
-	/* Exclude and include path parameters */
-	struct string_list limit_by_name;
-	int has_include;
-
-	/* Various "current state" */
-	int linenr; /* current line number */
-	struct string_list symlink_changes; /* we have to track symlinks */
-
-	/*
-	 * For "diff-stat" like behaviour, we keep track of the biggest change
-	 * we've seen, and the longest filename. That allows us to do simple
-	 * scaling.
-	 */
-	int max_change;
-	int max_len;
-
-	/*
-	 * Records filenames that have been touched, in order to handle
-	 * the case where more than one patches touch the same file.
-	 */
-	struct string_list fn_table;
-
-	/* These control whitespace errors */
-	enum apply_ws_error_action ws_error_action;
-	enum apply_ws_ignore ws_ignore_action;
-	const char *whitespace_option;
-	int whitespace_error;
-	int squelch_whitespace_errors;
-	int applied_after_fixing_ws;
-};
+#include "apply.h"
 
 static const char * const apply_usage[] = {
 	N_("git apply [<options>] [<patch>...]"),
-- 
2.9.2.614.g4980f51

[PATCH v10 03/40] builtin/apply: make apply_patch() return -1 or -128 instead of die()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors
to the caller instead of die()ing.

As a first step in this direction, let's make apply_patch() return
-1 or -128 in case of errors instead of dying. For now its only
caller apply_all_patches() will exit(128) when apply_patch()
return -128 and it will exit(1) when it returns -1.

We exit() with code 128 because that was what die() was doing
and we want to keep the distinction between exiting with code 1
and exiting with code 128.

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 60 ++++++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 45 insertions(+), 15 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index ed923ca..435030a 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4404,6 +4404,15 @@ static struct lock_file lock_file;
 #define INACCURATE_EOF	(1<<0)
 #define RECOUNT		(1<<1)
 
+/*
+ * Try to apply a patch.
+ *
+ * Returns:
+ *  -128 if a bad error happened (like patch unreadable)
+ *  -1 if patch did not apply and user cannot deal with it
+ *   0 if the patch applied
+ *   1 if the patch did not apply but user might fix it
+ */
 static int apply_patch(struct apply_state *state,
 		       int fd,
 		       const char *filename,
@@ -4413,6 +4422,7 @@ static int apply_patch(struct apply_state *state,
 	struct strbuf buf = STRBUF_INIT; /* owns the patch text */
 	struct patch *list = NULL, **listp = &list;
 	int skipped_patch = 0;
+	int res = 0;
 
 	state->patch_input_file = filename;
 	read_patch_file(&buf, fd);
@@ -4445,8 +4455,11 @@ static int apply_patch(struct apply_state *state,
 		offset += nr;
 	}
 
-	if (!list && !skipped_patch)
-		die(_("unrecognized input"));
+	if (!list && !skipped_patch) {
+		error(_("unrecognized input"));
+		res = -128;
+		goto end;
+	}
 
 	if (state->whitespace_error && (state->ws_error_action == die_on_ws_error))
 		state->apply = 0;
@@ -4455,21 +4468,23 @@ static int apply_patch(struct apply_state *state,
 	if (state->update_index && state->newfd < 0)
 		state->newfd = hold_locked_index(state->lock_file, 1);
 
-	if (state->check_index) {
-		if (read_cache() < 0)
-			die(_("unable to read index file"));
+	if (state->check_index && read_cache() < 0) {
+		error(_("unable to read index file"));
+		res = -128;
+		goto end;
 	}
 
 	if ((state->check || state->apply) &&
 	    check_patch_list(state, list) < 0 &&
-	    !state->apply_with_reject)
-		exit(1);
+	    !state->apply_with_reject) {
+		res = -1;
+		goto end;
+	}
 
 	if (state->apply && write_out_results(state, list)) {
-		if (state->apply_with_reject)
-			exit(1);
 		/* with --3way, we still need to write the index out */
-		return 1;
+		res = state->apply_with_reject ? -1 : 1;
+		goto end;
 	}
 
 	if (state->fake_ancestor)
@@ -4484,10 +4499,11 @@ static int apply_patch(struct apply_state *state,
 	if (state->summary)
 		summary_patch_list(list);
 
+end:
 	free_patch_list(list);
 	strbuf_release(&buf);
 	string_list_clear(&state->fn_table, 0);
-	return 0;
+	return res;
 }
 
 static void git_apply_config(void)
@@ -4628,6 +4644,7 @@ static int apply_all_patches(struct apply_state *state,
 			     int options)
 {
 	int i;
+	int res;
 	int errs = 0;
 	int read_stdin = 1;
 
@@ -4636,7 +4653,10 @@ static int apply_all_patches(struct apply_state *state,
 		int fd;
 
 		if (!strcmp(arg, "-")) {
-			errs |= apply_patch(state, 0, "<stdin>", options);
+			res = apply_patch(state, 0, "<stdin>", options);
+			if (res < 0)
+				goto end;
+			errs |= res;
 			read_stdin = 0;
 			continue;
 		} else if (0 < state->prefix_length)
@@ -4649,12 +4669,19 @@ static int apply_all_patches(struct apply_state *state,
 			die_errno(_("can't open patch '%s'"), arg);
 		read_stdin = 0;
 		set_default_whitespace_mode(state);
-		errs |= apply_patch(state, fd, arg, options);
+		res = apply_patch(state, fd, arg, options);
+		if (res < 0)
+			goto end;
+		errs |= res;
 		close(fd);
 	}
 	set_default_whitespace_mode(state);
-	if (read_stdin)
-		errs |= apply_patch(state, 0, "<stdin>", options);
+	if (read_stdin) {
+		res = apply_patch(state, 0, "<stdin>", options);
+		if (res < 0)
+			goto end;
+		errs |= res;
+	}
 
 	if (state->whitespace_error) {
 		if (state->squelch_whitespace_errors &&
@@ -4690,6 +4717,9 @@ static int apply_all_patches(struct apply_state *state,
 	}
 
 	return !!errs;
+
+end:
+	exit(res == -1 ? 1 : 128);
 }
 
 int cmd_apply(int argc, const char **argv, const char *prefix)
-- 
2.9.2.614.g4980f51

[PATCH v10 04/40] builtin/apply: read_patch_file() return -1 instead of die()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing. Let's do that by returning -1 instead of
die()ing in read_patch_file().

Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 435030a..dd7afee 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -335,10 +335,10 @@ static void say_patch_name(FILE *output, const char *fmt, struct patch *patch)
 
 #define SLOP (16)
 
-static void read_patch_file(struct strbuf *sb, int fd)
+static int read_patch_file(struct strbuf *sb, int fd)
 {
 	if (strbuf_read(sb, fd, 0) < 0)
-		die_errno("git apply: failed to read");
+		return error_errno("git apply: failed to read");
 
 	/*
 	 * Make sure that we have some slop in the buffer
@@ -347,6 +347,7 @@ static void read_patch_file(struct strbuf *sb, int fd)
 	 */
 	strbuf_grow(sb, SLOP);
 	memset(sb->buf + sb->len, 0, SLOP);
+	return 0;
 }
 
 static unsigned long linelen(const char *buffer, unsigned long size)
@@ -4425,7 +4426,8 @@ static int apply_patch(struct apply_state *state,
 	int res = 0;
 
 	state->patch_input_file = filename;
-	read_patch_file(&buf, fd);
+	if (read_patch_file(&buf, fd) < 0)
+		return -128;
 	offset = 0;
 	while (offset < buf.len) {
 		struct patch *patch;
-- 
2.9.2.614.g4980f51

[PATCH v10 05/40] builtin/apply: make find_header() return -128 instead of die()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in builtin/apply.c, let's make find_header() return -128 instead of
calling die().

We could make it return -1, unfortunately find_header() already
returns -1 when no header is found.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c       | 40 ++++++++++++++++++++++++++++------------
 t/t4254-am-corrupt.sh |  2 +-
 2 files changed, 29 insertions(+), 13 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index dd7afee..434ba0c 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -1419,6 +1419,14 @@ static int parse_fragment_header(const char *line, int len, struct fragment *fra
 	return offset;
 }
 
+/*
+ * Find file diff header
+ *
+ * Returns:
+ *  -1 if no header was found
+ *  -128 in case of error
+ *   the size of the header in bytes (called "offset") otherwise
+ */
 static int find_header(struct apply_state *state,
 		       const char *line,
 		       unsigned long size,
@@ -1452,8 +1460,9 @@ static int find_header(struct apply_state *state,
 			struct fragment dummy;
 			if (parse_fragment_header(line, len, &dummy) < 0)
 				continue;
-			die(_("patch fragment without header at line %d: %.*s"),
-			    state->linenr, (int)len-1, line);
+			error(_("patch fragment without header at line %d: %.*s"),
+				     state->linenr, (int)len-1, line);
+			return -128;
 		}
 
 		if (size < len + 6)
@@ -1468,19 +1477,23 @@ static int find_header(struct apply_state *state,
 			if (git_hdr_len <= len)
 				continue;
 			if (!patch->old_name && !patch->new_name) {
-				if (!patch->def_name)
-					die(Q_("git diff header lacks filename information when removing "
-					       "%d leading pathname component (line %d)",
-					       "git diff header lacks filename information when removing "
-					       "%d leading pathname components (line %d)",
-					       state->p_value),
-					    state->p_value, state->linenr);
+				if (!patch->def_name) {
+					error(Q_("git diff header lacks filename information when removing "
+							"%d leading pathname component (line %d)",
+							"git diff header lacks filename information when removing "
+							"%d leading pathname components (line %d)",
+							state->p_value),
+						     state->p_value, state->linenr);
+					return -128;
+				}
 				patch->old_name = xstrdup(patch->def_name);
 				patch->new_name = xstrdup(patch->def_name);
 			}
-			if (!patch->is_delete && !patch->new_name)
-				die("git diff header lacks filename information "
-				    "(line %d)", state->linenr);
+			if (!patch->is_delete && !patch->new_name) {
+				error("git diff header lacks filename information "
+					     "(line %d)", state->linenr);
+				return -128;
+			}
 			patch->is_toplevel_relative = 1;
 			*hdrsize = git_hdr_len;
 			return offset;
@@ -1996,6 +2009,9 @@ static int parse_chunk(struct apply_state *state, char *buffer, unsigned long si
 	int hdrsize, patchsize;
 	int offset = find_header(state, buffer, size, &hdrsize, patch);
 
+	if (offset == -128)
+		exit(128);
+
 	if (offset < 0)
 		return offset;
 
diff --git a/t/t4254-am-corrupt.sh b/t/t4254-am-corrupt.sh
index 85716dd..9bd7dd2 100755
--- a/t/t4254-am-corrupt.sh
+++ b/t/t4254-am-corrupt.sh
@@ -29,7 +29,7 @@ test_expect_success 'try to apply corrupted patch' '
 '
 
 test_expect_success 'compare diagnostic; ensure file is still here' '
-	echo "fatal: git diff header lacks filename information (line 4)" >expected &&
+	echo "error: git diff header lacks filename information (line 4)" >expected &&
 	test_path_is_file f &&
 	test_cmp expected actual
 '
-- 
2.9.2.614.g4980f51

[PATCH v10 06/40] builtin/apply: make parse_chunk() return a negative integer on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing or exit()ing.

To do that in a compatible manner with the rest of the error handling
in builtin/apply.c, parse_chunk() should return a negative integer
instead of calling die() or exit().

As parse_chunk() is called only by apply_patch() which already
returns either -1 or -128 when an error happened, let's make it also
return -1 or -128.

This makes it compatible with what find_header() and parse_binary()
already return.

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 434ba0c..c07d142 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -1996,22 +1996,22 @@ static int use_patch(struct apply_state *state, struct patch *p)
 	return !state->has_include;
 }
 
-
 /*
  * Read the patch text in "buffer" that extends for "size" bytes; stop
  * reading after seeing a single patch (i.e. changes to a single file).
  * Create fragments (i.e. patch hunks) and hang them to the given patch.
- * Return the number of bytes consumed, so that the caller can call us
- * again for the next patch.
+ *
+ * Returns:
+ *   -1 if no header was found or parse_binary() failed,
+ *   -128 on another error,
+ *   the number of bytes consumed otherwise,
+ *     so that the caller can call us again for the next patch.
  */
 static int parse_chunk(struct apply_state *state, char *buffer, unsigned long size, struct patch *patch)
 {
 	int hdrsize, patchsize;
 	int offset = find_header(state, buffer, size, &hdrsize, patch);
 
-	if (offset == -128)
-		exit(128);
-
 	if (offset < 0)
 		return offset;
 
@@ -2071,8 +2071,10 @@ static int parse_chunk(struct apply_state *state, char *buffer, unsigned long si
 		 * empty to us here.
 		 */
 		if ((state->apply || state->check) &&
-		    (!patch->is_binary && !metadata_changes(patch)))
-			die(_("patch with only garbage at line %d"), state->linenr);
+		    (!patch->is_binary && !metadata_changes(patch))) {
+			error(_("patch with only garbage at line %d"), state->linenr);
+			return -128;
+		}
 	}
 
 	return offset + hdrsize + patchsize;
@@ -4455,6 +4457,10 @@ static int apply_patch(struct apply_state *state,
 		nr = parse_chunk(state, buf.buf + offset, buf.len - offset, patch);
 		if (nr < 0) {
 			free_patch(patch);
+			if (nr == -128) {
+				res = -128;
+				goto end;
+			}
 			break;
 		}
 		if (state->apply_in_reverse)
-- 
2.9.2.614.g4980f51

[PATCH v10 07/40] builtin/apply: make parse_single_patch() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in builtin/apply.c, parse_single_patch() should return a negative
integer instead of calling die().

Let's do that by using error() and let's adjust the related test
cases accordingly.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c        | 17 +++++++++++++----
 t/t4012-diff-binary.sh |  4 ++--
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index c07d142..10aaba7 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -1671,6 +1671,10 @@ static int parse_fragment(struct apply_state *state,
  *
  * The (fragment->patch, fragment->size) pair points into the memory given
  * by the caller, not a copy, when we return.
+ *
+ * Returns:
+ *   -1 in case of error,
+ *   the number of bytes in the patch otherwise.
  */
 static int parse_single_patch(struct apply_state *state,
 			      const char *line,
@@ -1688,8 +1692,10 @@ static int parse_single_patch(struct apply_state *state,
 		fragment = xcalloc(1, sizeof(*fragment));
 		fragment->linenr = state->linenr;
 		len = parse_fragment(state, line, size, patch, fragment);
-		if (len <= 0)
-			die(_("corrupt patch at line %d"), state->linenr);
+		if (len <= 0) {
+			free(fragment);
+			return error(_("corrupt patch at line %d"), state->linenr);
+		}
 		fragment->patch = line;
 		fragment->size = len;
 		oldlines += fragment->oldlines;
@@ -1725,9 +1731,9 @@ static int parse_single_patch(struct apply_state *state,
 		patch->is_delete = 0;
 
 	if (0 < patch->is_new && oldlines)
-		die(_("new file %s depends on old contents"), patch->new_name);
+		return error(_("new file %s depends on old contents"), patch->new_name);
 	if (0 < patch->is_delete && newlines)
-		die(_("deleted file %s still has contents"), patch->old_name);
+		return error(_("deleted file %s still has contents"), patch->old_name);
 	if (!patch->is_delete && !newlines && context)
 		fprintf_ln(stderr,
 			   _("** warning: "
@@ -2029,6 +2035,9 @@ static int parse_chunk(struct apply_state *state, char *buffer, unsigned long si
 				       size - offset - hdrsize,
 				       patch);
 
+	if (patchsize < 0)
+		return -128;
+
 	if (!patchsize) {
 		static const char git_binary[] = "GIT binary patch\n";
 		int hd = hdrsize + offset;
diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh
index 643d729..0a8af76 100755
--- a/t/t4012-diff-binary.sh
+++ b/t/t4012-diff-binary.sh
@@ -68,7 +68,7 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' '
 	sed -e "s/-CIT/xCIT/" <output >broken &&
 	test_must_fail git apply --stat --summary broken 2>detected &&
 	detected=$(cat detected) &&
-	detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") &&
+	detected=$(expr "$detected" : "error.*at line \\([0-9]*\\)\$") &&
 	detected=$(sed -ne "${detected}p" broken) &&
 	test "$detected" = xCIT
 '
@@ -77,7 +77,7 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' '
 	git diff --binary | sed -e "s/-CIT/xCIT/" >broken &&
 	test_must_fail git apply --stat --summary broken 2>detected &&
 	detected=$(cat detected) &&
-	detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") &&
+	detected=$(expr "$detected" : "error.*at line \\([0-9]*\\)\$") &&
 	detected=$(sed -ne "${detected}p" broken) &&
 	test "$detected" = xCIT
 '
-- 
2.9.2.614.g4980f51

[PATCH v10 08/40] builtin/apply: make parse_whitespace_option() return -1 instead of die()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in builtin/apply.c, parse_whitespace_option() should return -1 instead
of calling die().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 10aaba7..06a76f2 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -27,34 +27,34 @@ static const char * const apply_usage[] = {
 	NULL
 };
 
-static void parse_whitespace_option(struct apply_state *state, const char *option)
+static int parse_whitespace_option(struct apply_state *state, const char *option)
 {
 	if (!option) {
 		state->ws_error_action = warn_on_ws_error;
-		return;
+		return 0;
 	}
 	if (!strcmp(option, "warn")) {
 		state->ws_error_action = warn_on_ws_error;
-		return;
+		return 0;
 	}
 	if (!strcmp(option, "nowarn")) {
 		state->ws_error_action = nowarn_ws_error;
-		return;
+		return 0;
 	}
 	if (!strcmp(option, "error")) {
 		state->ws_error_action = die_on_ws_error;
-		return;
+		return 0;
 	}
 	if (!strcmp(option, "error-all")) {
 		state->ws_error_action = die_on_ws_error;
 		state->squelch_whitespace_errors = 0;
-		return;
+		return 0;
 	}
 	if (!strcmp(option, "strip") || !strcmp(option, "fix")) {
 		state->ws_error_action = correct_ws_error;
-		return;
+		return 0;
 	}
-	die(_("unrecognized whitespace option '%s'"), option);
+	return error(_("unrecognized whitespace option '%s'"), option);
 }
 
 static void parse_ignorewhitespace_option(struct apply_state *state,
@@ -4589,7 +4589,8 @@ static int option_parse_whitespace(const struct option *opt,
 {
 	struct apply_state *state = opt->value;
 	state->whitespace_option = arg;
-	parse_whitespace_option(state, arg);
+	if (parse_whitespace_option(state, arg))
+		exit(1);
 	return 0;
 }
 
@@ -4626,8 +4627,8 @@ static void init_apply_state(struct apply_state *state,
 	strbuf_init(&state->root, 0);
 
 	git_apply_config();
-	if (apply_default_whitespace)
-		parse_whitespace_option(state, apply_default_whitespace);
+	if (apply_default_whitespace && parse_whitespace_option(state, apply_default_whitespace))
+		exit(1);
 	if (apply_default_ignorewhitespace)
 		parse_ignorewhitespace_option(state, apply_default_ignorewhitespace);
 }
-- 
2.9.2.614.g4980f51

[PATCH v10 09/40] builtin/apply: make parse_ignorewhitespace_option() return -1 instead of die()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", parse_ignorewhitespace_option() should return
-1 instead of calling die().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 06a76f2..ecb1f7a 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -57,20 +57,20 @@ static int parse_whitespace_option(struct apply_state *state, const char *option
 	return error(_("unrecognized whitespace option '%s'"), option);
 }
 
-static void parse_ignorewhitespace_option(struct apply_state *state,
-					  const char *option)
+static int parse_ignorewhitespace_option(struct apply_state *state,
+					 const char *option)
 {
 	if (!option || !strcmp(option, "no") ||
 	    !strcmp(option, "false") || !strcmp(option, "never") ||
 	    !strcmp(option, "none")) {
 		state->ws_ignore_action = ignore_ws_none;
-		return;
+		return 0;
 	}
 	if (!strcmp(option, "change")) {
 		state->ws_ignore_action = ignore_ws_change;
-		return;
+		return 0;
 	}
-	die(_("unrecognized whitespace ignore option '%s'"), option);
+	return error(_("unrecognized whitespace ignore option '%s'"), option);
 }
 
 static void set_default_whitespace_mode(struct apply_state *state)
@@ -4629,8 +4629,8 @@ static void init_apply_state(struct apply_state *state,
 	git_apply_config();
 	if (apply_default_whitespace && parse_whitespace_option(state, apply_default_whitespace))
 		exit(1);
-	if (apply_default_ignorewhitespace)
-		parse_ignorewhitespace_option(state, apply_default_ignorewhitespace);
+	if (apply_default_ignorewhitespace && parse_ignorewhitespace_option(state, apply_default_ignorewhitespace))
+		exit(1);
 }
 
 static void clear_apply_state(struct apply_state *state)
-- 
2.9.2.614.g4980f51

[PATCH v10 10/40] builtin/apply: move init_apply_state() to apply.c

[Christian Couder]

To libify `git apply` functionality we must make init_apply_state()
usable outside "builtin/apply.c".

Let's do that by moving it into a new "apply.c".

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 Makefile        |  1 +
 apply.c         | 94 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 apply.h         | 10 ++++++
 builtin/apply.c | 91 -------------------------------------------------------
 4 files changed, 105 insertions(+), 91 deletions(-)
 create mode 100644 apply.c

diff --git a/Makefile b/Makefile
index 6a13386..3230fd0 100644
--- a/Makefile
+++ b/Makefile
@@ -683,6 +683,7 @@ LIB_OBJS += abspath.o
 LIB_OBJS += advice.o
 LIB_OBJS += alias.o
 LIB_OBJS += alloc.o
+LIB_OBJS += apply.o
 LIB_OBJS += archive.o
 LIB_OBJS += archive-tar.o
 LIB_OBJS += archive-zip.o
diff --git a/apply.c b/apply.c
new file mode 100644
index 0000000..c858ca4
--- /dev/null
+++ b/apply.c
@@ -0,0 +1,94 @@
+#include "cache.h"
+#include "lockfile.h"
+#include "apply.h"
+
+static void git_apply_config(void)
+{
+	git_config_get_string_const("apply.whitespace", &apply_default_whitespace);
+	git_config_get_string_const("apply.ignorewhitespace", &apply_default_ignorewhitespace);
+	git_config(git_default_config, NULL);
+}
+
+int parse_whitespace_option(struct apply_state *state, const char *option)
+{
+	if (!option) {
+		state->ws_error_action = warn_on_ws_error;
+		return 0;
+	}
+	if (!strcmp(option, "warn")) {
+		state->ws_error_action = warn_on_ws_error;
+		return 0;
+	}
+	if (!strcmp(option, "nowarn")) {
+		state->ws_error_action = nowarn_ws_error;
+		return 0;
+	}
+	if (!strcmp(option, "error")) {
+		state->ws_error_action = die_on_ws_error;
+		return 0;
+	}
+	if (!strcmp(option, "error-all")) {
+		state->ws_error_action = die_on_ws_error;
+		state->squelch_whitespace_errors = 0;
+		return 0;
+	}
+	if (!strcmp(option, "strip") || !strcmp(option, "fix")) {
+		state->ws_error_action = correct_ws_error;
+		return 0;
+	}
+	return error(_("unrecognized whitespace option '%s'"), option);
+}
+
+int parse_ignorewhitespace_option(struct apply_state *state,
+				  const char *option)
+{
+	if (!option || !strcmp(option, "no") ||
+	    !strcmp(option, "false") || !strcmp(option, "never") ||
+	    !strcmp(option, "none")) {
+		state->ws_ignore_action = ignore_ws_none;
+		return 0;
+	}
+	if (!strcmp(option, "change")) {
+		state->ws_ignore_action = ignore_ws_change;
+		return 0;
+	}
+	return error(_("unrecognized whitespace ignore option '%s'"), option);
+}
+
+void init_apply_state(struct apply_state *state,
+		      const char *prefix,
+		      struct lock_file *lock_file)
+{
+	memset(state, 0, sizeof(*state));
+	state->prefix = prefix;
+	state->prefix_length = state->prefix ? strlen(state->prefix) : 0;
+	state->lock_file = lock_file;
+	state->newfd = -1;
+	state->apply = 1;
+	state->line_termination = '\n';
+	state->p_value = 1;
+	state->p_context = UINT_MAX;
+	state->squelch_whitespace_errors = 5;
+	state->ws_error_action = warn_on_ws_error;
+	state->ws_ignore_action = ignore_ws_none;
+	state->linenr = 1;
+	string_list_init(&state->fn_table, 0);
+	string_list_init(&state->limit_by_name, 0);
+	string_list_init(&state->symlink_changes, 0);
+	strbuf_init(&state->root, 0);
+
+	git_apply_config();
+	if (apply_default_whitespace && parse_whitespace_option(state, apply_default_whitespace))
+		exit(1);
+	if (apply_default_ignorewhitespace && parse_ignorewhitespace_option(state, apply_default_ignorewhitespace))
+		exit(1);
+}
+
+void clear_apply_state(struct apply_state *state)
+{
+	string_list_clear(&state->limit_by_name, 0);
+	string_list_clear(&state->symlink_changes, 0);
+	strbuf_release(&state->root);
+
+	/* &state->fn_table is cleared at the end of apply_patch() */
+}
diff --git a/apply.h b/apply.h
index 7493a40..08c0a25 100644
--- a/apply.h
+++ b/apply.h
@@ -97,4 +97,14 @@ struct apply_state {
 	int applied_after_fixing_ws;
 };
 
+extern int parse_whitespace_option(struct apply_state *state,
+				   const char *option);
+extern int parse_ignorewhitespace_option(struct apply_state *state,
+					 const char *option);
+
+extern void init_apply_state(struct apply_state *state,
+			     const char *prefix,
+			     struct lock_file *lock_file);
+extern void clear_apply_state(struct apply_state *state);
+
 #endif
diff --git a/builtin/apply.c b/builtin/apply.c
index ecb1f7a..bb6ff77 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -27,52 +27,6 @@ static const char * const apply_usage[] = {
 	NULL
 };
 
-static int parse_whitespace_option(struct apply_state *state, const char *option)
-{
-	if (!option) {
-		state->ws_error_action = warn_on_ws_error;
-		return 0;
-	}
-	if (!strcmp(option, "warn")) {
-		state->ws_error_action = warn_on_ws_error;
-		return 0;
-	}
-	if (!strcmp(option, "nowarn")) {
-		state->ws_error_action = nowarn_ws_error;
-		return 0;
-	}
-	if (!strcmp(option, "error")) {
-		state->ws_error_action = die_on_ws_error;
-		return 0;
-	}
-	if (!strcmp(option, "error-all")) {
-		state->ws_error_action = die_on_ws_error;
-		state->squelch_whitespace_errors = 0;
-		return 0;
-	}
-	if (!strcmp(option, "strip") || !strcmp(option, "fix")) {
-		state->ws_error_action = correct_ws_error;
-		return 0;
-	}
-	return error(_("unrecognized whitespace option '%s'"), option);
-}
-
-static int parse_ignorewhitespace_option(struct apply_state *state,
-					 const char *option)
-{
-	if (!option || !strcmp(option, "no") ||
-	    !strcmp(option, "false") || !strcmp(option, "never") ||
-	    !strcmp(option, "none")) {
-		state->ws_ignore_action = ignore_ws_none;
-		return 0;
-	}
-	if (!strcmp(option, "change")) {
-		state->ws_ignore_action = ignore_ws_change;
-		return 0;
-	}
-	return error(_("unrecognized whitespace ignore option '%s'"), option);
-}
-
 static void set_default_whitespace_mode(struct apply_state *state)
 {
 	if (!state->whitespace_option && !apply_default_whitespace)
@@ -4539,13 +4493,6 @@ static int apply_patch(struct apply_state *state,
 	return res;
 }
 
-static void git_apply_config(void)
-{
-	git_config_get_string_const("apply.whitespace", &apply_default_whitespace);
-	git_config_get_string_const("apply.ignorewhitespace", &apply_default_ignorewhitespace);
-	git_config(git_default_config, NULL);
-}
-
 static int option_parse_exclude(const struct option *opt,
 				const char *arg, int unset)
 {
@@ -4604,44 +4551,6 @@ static int option_parse_directory(const struct option *opt,
 	return 0;
 }
 
-static void init_apply_state(struct apply_state *state,
-			     const char *prefix,
-			     struct lock_file *lock_file)
-{
-	memset(state, 0, sizeof(*state));
-	state->prefix = prefix;
-	state->prefix_length = state->prefix ? strlen(state->prefix) : 0;
-	state->lock_file = lock_file;
-	state->newfd = -1;
-	state->apply = 1;
-	state->line_termination = '\n';
-	state->p_value = 1;
-	state->p_context = UINT_MAX;
-	state->squelch_whitespace_errors = 5;
-	state->ws_error_action = warn_on_ws_error;
-	state->ws_ignore_action = ignore_ws_none;
-	state->linenr = 1;
-	string_list_init(&state->fn_table, 0);
-	string_list_init(&state->limit_by_name, 0);
-	string_list_init(&state->symlink_changes, 0);
-	strbuf_init(&state->root, 0);
-
-	git_apply_config();
-	if (apply_default_whitespace && parse_whitespace_option(state, apply_default_whitespace))
-		exit(1);
-	if (apply_default_ignorewhitespace && parse_ignorewhitespace_option(state, apply_default_ignorewhitespace))
-		exit(1);
-}
-
-static void clear_apply_state(struct apply_state *state)
-{
-	string_list_clear(&state->limit_by_name, 0);
-	string_list_clear(&state->symlink_changes, 0);
-	strbuf_release(&state->root);
-
-	/* &state->fn_table is cleared at the end of apply_patch() */
-}
-
 static void check_apply_state(struct apply_state *state, int force_apply)
 {
 	int is_not_gitdir = !startup_info->have_repository;
-- 
2.9.2.614.g4980f51

[PATCH v10 11/40] apply: make init_apply_state() return -1 instead of exit()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", init_apply_state() should return -1 instead of
calling exit().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c         | 11 ++++++-----
 apply.h         |  6 +++---
 builtin/apply.c |  3 ++-
 3 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/apply.c b/apply.c
index c858ca4..6e0e992 100644
--- a/apply.c
+++ b/apply.c
@@ -55,9 +55,9 @@ int parse_ignorewhitespace_option(struct apply_state *state,
 	return error(_("unrecognized whitespace ignore option '%s'"), option);
 }
 
-void init_apply_state(struct apply_state *state,
-		      const char *prefix,
-		      struct lock_file *lock_file)
+int init_apply_state(struct apply_state *state,
+		     const char *prefix,
+		     struct lock_file *lock_file)
 {
 	memset(state, 0, sizeof(*state));
 	state->prefix = prefix;
@@ -79,9 +79,10 @@ void init_apply_state(struct apply_state *state,
 
 	git_apply_config();
 	if (apply_default_whitespace && parse_whitespace_option(state, apply_default_whitespace))
-		exit(1);
+		return -1;
 	if (apply_default_ignorewhitespace && parse_ignorewhitespace_option(state, apply_default_ignorewhitespace))
-		exit(1);
+		return -1;
+	return 0;
 }
 
 void clear_apply_state(struct apply_state *state)
diff --git a/apply.h b/apply.h
index 08c0a25..e18a18a 100644
--- a/apply.h
+++ b/apply.h
@@ -102,9 +102,9 @@ extern int parse_whitespace_option(struct apply_state *state,
 extern int parse_ignorewhitespace_option(struct apply_state *state,
 					 const char *option);
 
-extern void init_apply_state(struct apply_state *state,
-			     const char *prefix,
-			     struct lock_file *lock_file);
+extern int init_apply_state(struct apply_state *state,
+			    const char *prefix,
+			    struct lock_file *lock_file);
 extern void clear_apply_state(struct apply_state *state);
 
 #endif
diff --git a/builtin/apply.c b/builtin/apply.c
index bb6ff77..61fd316 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4741,7 +4741,8 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 		OPT_END()
 	};
 
-	init_apply_state(&state, prefix, &lock_file);
+	if (init_apply_state(&state, prefix, &lock_file))
+		exit(128);
 
 	argc = parse_options(argc, argv, state.prefix, builtin_apply_options,
 			apply_usage, 0);
-- 
2.9.2.614.g4980f51

[PATCH v10 12/40] builtin/apply: make check_apply_state() return -1 instead of die()ing

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", check_apply_state() should return -1 instead of
calling die().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 61fd316..bb89e07 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4551,17 +4551,17 @@ static int option_parse_directory(const struct option *opt,
 	return 0;
 }
 
-static void check_apply_state(struct apply_state *state, int force_apply)
+static int check_apply_state(struct apply_state *state, int force_apply)
 {
 	int is_not_gitdir = !startup_info->have_repository;
 
 	if (state->apply_with_reject && state->threeway)
-		die("--reject and --3way cannot be used together.");
+		return error("--reject and --3way cannot be used together.");
 	if (state->cached && state->threeway)
-		die("--cached and --3way cannot be used together.");
+		return error("--cached and --3way cannot be used together.");
 	if (state->threeway) {
 		if (is_not_gitdir)
-			die(_("--3way outside a repository"));
+			return error(_("--3way outside a repository"));
 		state->check_index = 1;
 	}
 	if (state->apply_with_reject)
@@ -4569,16 +4569,18 @@ static void check_apply_state(struct apply_state *state, int force_apply)
 	if (!force_apply && (state->diffstat || state->numstat || state->summary || state->check || state->fake_ancestor))
 		state->apply = 0;
 	if (state->check_index && is_not_gitdir)
-		die(_("--index outside a repository"));
+		return error(_("--index outside a repository"));
 	if (state->cached) {
 		if (is_not_gitdir)
-			die(_("--cached outside a repository"));
+			return error(_("--cached outside a repository"));
 		state->check_index = 1;
 	}
 	if (state->check_index)
 		state->unsafe_paths = 0;
 	if (!state->lock_file)
-		die("BUG: state->lock_file should not be NULL");
+		return error("BUG: state->lock_file should not be NULL");
+
+	return 0;
 }
 
 static int apply_all_patches(struct apply_state *state,
@@ -4747,7 +4749,8 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 	argc = parse_options(argc, argv, state.prefix, builtin_apply_options,
 			apply_usage, 0);
 
-	check_apply_state(&state, force_apply);
+	if (check_apply_state(&state, force_apply))
+		exit(128);
 
 	ret = apply_all_patches(&state, argc, argv, options);
 
-- 
2.9.2.614.g4980f51

[PATCH v10 13/40] builtin/apply: move check_apply_state() to apply.c

[Christian Couder]

To libify `git apply` functionality we must make check_apply_state()
usable outside "builtin/apply.c".

Let's do that by moving it into "apply.c".

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c         | 32 ++++++++++++++++++++++++++++++++
 apply.h         |  1 +
 builtin/apply.c | 32 --------------------------------
 3 files changed, 33 insertions(+), 32 deletions(-)

diff --git a/apply.c b/apply.c
index 6e0e992..2eac3e3 100644
--- a/apply.c
+++ b/apply.c
@@ -93,3 +93,35 @@ void clear_apply_state(struct apply_state *state)
 
 	/* &state->fn_table is cleared at the end of apply_patch() */
 }
+
+int check_apply_state(struct apply_state *state, int force_apply)
+{
+	int is_not_gitdir = !startup_info->have_repository;
+
+	if (state->apply_with_reject && state->threeway)
+		return error("--reject and --3way cannot be used together.");
+	if (state->cached && state->threeway)
+		return error("--cached and --3way cannot be used together.");
+	if (state->threeway) {
+		if (is_not_gitdir)
+			return error(_("--3way outside a repository"));
+		state->check_index = 1;
+	}
+	if (state->apply_with_reject)
+		state->apply = state->apply_verbosely = 1;
+	if (!force_apply && (state->diffstat || state->numstat || state->summary || state->check || state->fake_ancestor))
+		state->apply = 0;
+	if (state->check_index && is_not_gitdir)
+		return error(_("--index outside a repository"));
+	if (state->cached) {
+		if (is_not_gitdir)
+			return error(_("--cached outside a repository"));
+		state->check_index = 1;
+	}
+	if (state->check_index)
+		state->unsafe_paths = 0;
+	if (!state->lock_file)
+		return error("BUG: state->lock_file should not be NULL");
+
+	return 0;
+}
diff --git a/apply.h b/apply.h
index e18a18a..53f09b5 100644
--- a/apply.h
+++ b/apply.h
@@ -106,5 +106,6 @@ extern int init_apply_state(struct apply_state *state,
 			    const char *prefix,
 			    struct lock_file *lock_file);
 extern void clear_apply_state(struct apply_state *state);
+extern int check_apply_state(struct apply_state *state, int force_apply);
 
 #endif
diff --git a/builtin/apply.c b/builtin/apply.c
index bb89e07..075ada4 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4551,38 +4551,6 @@ static int option_parse_directory(const struct option *opt,
 	return 0;
 }
 
-static int check_apply_state(struct apply_state *state, int force_apply)
-{
-	int is_not_gitdir = !startup_info->have_repository;
-
-	if (state->apply_with_reject && state->threeway)
-		return error("--reject and --3way cannot be used together.");
-	if (state->cached && state->threeway)
-		return error("--cached and --3way cannot be used together.");
-	if (state->threeway) {
-		if (is_not_gitdir)
-			return error(_("--3way outside a repository"));
-		state->check_index = 1;
-	}
-	if (state->apply_with_reject)
-		state->apply = state->apply_verbosely = 1;
-	if (!force_apply && (state->diffstat || state->numstat || state->summary || state->check || state->fake_ancestor))
-		state->apply = 0;
-	if (state->check_index && is_not_gitdir)
-		return error(_("--index outside a repository"));
-	if (state->cached) {
-		if (is_not_gitdir)
-			return error(_("--cached outside a repository"));
-		state->check_index = 1;
-	}
-	if (state->check_index)
-		state->unsafe_paths = 0;
-	if (!state->lock_file)
-		return error("BUG: state->lock_file should not be NULL");
-
-	return 0;
-}
-
 static int apply_all_patches(struct apply_state *state,
 			     int argc,
 			     const char **argv,
-- 
2.9.2.614.g4980f51

[PATCH v10 14/40] builtin/apply: make apply_all_patches() return 128 or 1 on error

[Christian Couder]

To finish libifying the apply functionality, apply_all_patches() should not
die() or exit() in case of error, but return either 128 or 1, so that it
gives the same exit code as when die() or exit(1) is called. This way
scripts relying on the exit code don't need to be changed.

While doing that we must take care that file descriptors are properly closed
and, if needed, reset to a sensible value.

Also, according to the lockfile API, when finished with a lockfile, one
should either commit it or roll it back.

This is even more important now that the same lockfile can be passed
to init_apply_state() many times to be reused by series of calls to
the apply lib functions.

Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 075ada4..5530ba1 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4578,15 +4578,18 @@ static int apply_all_patches(struct apply_state *state,
 					      arg);
 
 		fd = open(arg, O_RDONLY);
-		if (fd < 0)
-			die_errno(_("can't open patch '%s'"), arg);
+		if (fd < 0) {
+			error(_("can't open patch '%s': %s"), arg, strerror(errno));
+			res = -128;
+			goto end;
+		}
 		read_stdin = 0;
 		set_default_whitespace_mode(state);
 		res = apply_patch(state, fd, arg, options);
+		close(fd);
 		if (res < 0)
 			goto end;
 		errs |= res;
-		close(fd);
 	}
 	set_default_whitespace_mode(state);
 	if (read_stdin) {
@@ -4606,11 +4609,14 @@ static int apply_all_patches(struct apply_state *state,
 				   squelched),
 				squelched);
 		}
-		if (state->ws_error_action == die_on_ws_error)
-			die(Q_("%d line adds whitespace errors.",
-			       "%d lines add whitespace errors.",
-			       state->whitespace_error),
-			    state->whitespace_error);
+		if (state->ws_error_action == die_on_ws_error) {
+			error(Q_("%d line adds whitespace errors.",
+				 "%d lines add whitespace errors.",
+				 state->whitespace_error),
+			      state->whitespace_error);
+			res = -128;
+			goto end;
+		}
 		if (state->applied_after_fixing_ws && state->apply)
 			warning("%d line%s applied after"
 				" fixing whitespace errors.",
@@ -4624,15 +4630,24 @@ static int apply_all_patches(struct apply_state *state,
 	}
 
 	if (state->update_index) {
-		if (write_locked_index(&the_index, state->lock_file, COMMIT_LOCK))
-			die(_("Unable to write new index file"));
+		res = write_locked_index(&the_index, state->lock_file, COMMIT_LOCK);
+		if (res) {
+			error(_("Unable to write new index file"));
+			res = -128;
+			goto end;
+		}
 		state->newfd = -1;
 	}
 
 	return !!errs;
 
 end:
-	exit(res == -1 ? 1 : 128);
+	if (state->newfd >= 0) {
+		rollback_lock_file(state->lock_file);
+		state->newfd = -1;
+	}
+
+	return (res == -1 ? 1 : 128);
 }
 
 int cmd_apply(int argc, const char **argv, const char *prefix)
-- 
2.9.2.614.g4980f51

[PATCH v10 15/40] builtin/apply: make parse_traditional_patch() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", parse_traditional_patch() should return -1
instead of calling die().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 5530ba1..f99498b 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -755,10 +755,10 @@ static int has_epoch_timestamp(const char *nameline)
  * files, we can happily check the index for a match, but for creating a
  * new file we should try to match whatever "patch" does. I have no idea.
  */
-static void parse_traditional_patch(struct apply_state *state,
-				    const char *first,
-				    const char *second,
-				    struct patch *patch)
+static int parse_traditional_patch(struct apply_state *state,
+				   const char *first,
+				   const char *second,
+				   struct patch *patch)
 {
 	char *name;
 
@@ -803,7 +803,9 @@ static void parse_traditional_patch(struct apply_state *state,
 		}
 	}
 	if (!name)
-		die(_("unable to find filename in patch at line %d"), state->linenr);
+		return error(_("unable to find filename in patch at line %d"), state->linenr);
+
+	return 0;
 }
 
 static int gitdiff_hdrend(struct apply_state *state,
@@ -1467,7 +1469,8 @@ static int find_header(struct apply_state *state,
 			continue;
 
 		/* Ok, we'll consider it a patch */
-		parse_traditional_patch(state, line, line+len, patch);
+		if (parse_traditional_patch(state, line, line+len, patch))
+			return -128;
 		*hdrsize = len + nextlen;
 		state->linenr += 2;
 		return offset;
-- 
2.9.2.614.g4980f51

[PATCH v10 16/40] builtin/apply: make gitdiff_*() return 1 at end of header

[Christian Couder]

The gitdiff_*() functions that are called as p->fn() in parse_git_header()
should return 1 instead of -1 in case of end of header or unrecognized
input, as these are not real errors. It just instructs the parser to break
out.

This makes it possible for gitdiff_*() functions to return -1 in case of a
real error. This will be done in a following patch.

Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index f99498b..eb918e5 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -812,7 +812,7 @@ static int gitdiff_hdrend(struct apply_state *state,
 			  const char *line,
 			  struct patch *patch)
 {
-	return -1;
+	return 1;
 }
 
 /*
@@ -1016,7 +1016,7 @@ static int gitdiff_unrecognized(struct apply_state *state,
 				const char *line,
 				struct patch *patch)
 {
-	return -1;
+	return 1;
 }
 
 /*
@@ -1248,9 +1248,13 @@ static int parse_git_header(struct apply_state *state,
 		for (i = 0; i < ARRAY_SIZE(optable); i++) {
 			const struct opentry *p = optable + i;
 			int oplen = strlen(p->str);
+			int res;
 			if (len < oplen || memcmp(p->str, line, oplen))
 				continue;
-			if (p->fn(state, line + oplen, patch) < 0)
+			res = p->fn(state, line + oplen, patch);
+			if (res < 0)
+				return -1;
+			if (res > 0)
 				return offset;
 			break;
 		}
@@ -1430,6 +1434,8 @@ static int find_header(struct apply_state *state,
 		 */
 		if (!memcmp("diff --git ", line, 11)) {
 			int git_hdr_len = parse_git_header(state, line, len, size, patch);
+			if (git_hdr_len < 0)
+				return -128;
 			if (git_hdr_len <= len)
 				continue;
 			if (!patch->old_name && !patch->new_name) {
-- 
2.9.2.614.g4980f51

[PATCH v10 17/40] builtin/apply: make gitdiff_*() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", gitdiff_*() functions should return -1 instead
of calling die().

A previous patch made it possible for gitdiff_*() functions to
return -1 in case of error. Let's take advantage of that to
make gitdiff_verify_name() return -1 on error, and to have
gitdiff_oldname() and gitdiff_newname() directly return
what gitdiff_verify_name() returns.

Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 40 +++++++++++++++++++++-------------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index eb918e5..6b16173 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -827,54 +827,56 @@ static int gitdiff_hdrend(struct apply_state *state,
 #define DIFF_OLD_NAME 0
 #define DIFF_NEW_NAME 1
 
-static void gitdiff_verify_name(struct apply_state *state,
-				const char *line,
-				int isnull,
-				char **name,
-				int side)
+static int gitdiff_verify_name(struct apply_state *state,
+			       const char *line,
+			       int isnull,
+			       char **name,
+			       int side)
 {
 	if (!*name && !isnull) {
 		*name = find_name(state, line, NULL, state->p_value, TERM_TAB);
-		return;
+		return 0;
 	}
 
 	if (*name) {
 		int len = strlen(*name);
 		char *another;
 		if (isnull)
-			die(_("git apply: bad git-diff - expected /dev/null, got %s on line %d"),
-			    *name, state->linenr);
+			return error(_("git apply: bad git-diff - expected /dev/null, got %s on line %d"),
+				     *name, state->linenr);
 		another = find_name(state, line, NULL, state->p_value, TERM_TAB);
-		if (!another || memcmp(another, *name, len + 1))
-			die((side == DIFF_NEW_NAME) ?
+		if (!another || memcmp(another, *name, len + 1)) {
+			free(another);
+			return error((side == DIFF_NEW_NAME) ?
 			    _("git apply: bad git-diff - inconsistent new filename on line %d") :
 			    _("git apply: bad git-diff - inconsistent old filename on line %d"), state->linenr);
+		}
 		free(another);
 	} else {
 		/* expect "/dev/null" */
 		if (memcmp("/dev/null", line, 9) || line[9] != '\n')
-			die(_("git apply: bad git-diff - expected /dev/null on line %d"), state->linenr);
+			return error(_("git apply: bad git-diff - expected /dev/null on line %d"), state->linenr);
 	}
+
+	return 0;
 }
 
 static int gitdiff_oldname(struct apply_state *state,
 			   const char *line,
 			   struct patch *patch)
 {
-	gitdiff_verify_name(state, line,
-			    patch->is_new, &patch->old_name,
-			    DIFF_OLD_NAME);
-	return 0;
+	return gitdiff_verify_name(state, line,
+				   patch->is_new, &patch->old_name,
+				   DIFF_OLD_NAME);
 }
 
 static int gitdiff_newname(struct apply_state *state,
 			   const char *line,
 			   struct patch *patch)
 {
-	gitdiff_verify_name(state, line,
-			    patch->is_delete, &patch->new_name,
-			    DIFF_NEW_NAME);
-	return 0;
+	return gitdiff_verify_name(state, line,
+				   patch->is_delete, &patch->new_name,
+				   DIFF_NEW_NAME);
 }
 
 static int gitdiff_oldmode(struct apply_state *state,
-- 
2.9.2.614.g4980f51

[PATCH v10 18/40] builtin/apply: change die_on_unsafe_path() to check_unsafe_path()

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", die_on_unsafe_path() should return a negative
integer instead of calling die(), so while doing that let's change
its name to check_unsafe_path().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 6b16173..166e94d 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -3704,7 +3704,7 @@ static int path_is_beyond_symlink(struct apply_state *state, const char *name_)
 	return ret;
 }
 
-static void die_on_unsafe_path(struct patch *patch)
+static int check_unsafe_path(struct patch *patch)
 {
 	const char *old_name = NULL;
 	const char *new_name = NULL;
@@ -3716,9 +3716,10 @@ static void die_on_unsafe_path(struct patch *patch)
 		new_name = patch->new_name;
 
 	if (old_name && !verify_path(old_name))
-		die(_("invalid path '%s'"), old_name);
+		return error(_("invalid path '%s'"), old_name);
 	if (new_name && !verify_path(new_name))
-		die(_("invalid path '%s'"), new_name);
+		return error(_("invalid path '%s'"), new_name);
+	return 0;
 }
 
 /*
@@ -3808,8 +3809,8 @@ static int check_patch(struct apply_state *state, struct patch *patch)
 		}
 	}
 
-	if (!state->unsafe_paths)
-		die_on_unsafe_path(patch);
+	if (!state->unsafe_paths && check_unsafe_path(patch))
+		return -128;
 
 	/*
 	 * An attempt to read from or delete a path that is beyond a
@@ -3837,10 +3838,14 @@ static int check_patch_list(struct apply_state *state, struct patch *patch)
 	prepare_symlink_changes(state, patch);
 	prepare_fn_table(state, patch);
 	while (patch) {
+		int res;
 		if (state->apply_verbosely)
 			say_patch_name(stderr,
 				       _("Checking patch %s..."), patch);
-		err |= check_patch(state, patch);
+		res = check_patch(state, patch);
+		if (res == -128)
+			return -128;
+		err |= res;
 		patch = patch->next;
 	}
 	return err;
@@ -4472,11 +4477,16 @@ static int apply_patch(struct apply_state *state,
 		goto end;
 	}
 
-	if ((state->check || state->apply) &&
-	    check_patch_list(state, list) < 0 &&
-	    !state->apply_with_reject) {
-		res = -1;
-		goto end;
+	if (state->check || state->apply) {
+		int r = check_patch_list(state, list);
+		if (r == -128) {
+			res = -128;
+			goto end;
+		}
+		if (r < 0 && !state->apply_with_reject) {
+			res = -1;
+			goto end;
+		}
 	}
 
 	if (state->apply && write_out_results(state, list)) {
-- 
2.9.2.614.g4980f51

[PATCH v10 19/40] builtin/apply: make build_fake_ancestor() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", build_fake_ancestor() should return -1 instead
of calling die().

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 41 ++++++++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 166e94d..575981b 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -3900,11 +3900,12 @@ static int preimage_sha1_in_gitlink_patch(struct patch *p, unsigned char sha1[20
 }
 
 /* Build an index that contains the just the files needed for a 3way merge */
-static void build_fake_ancestor(struct patch *list, const char *filename)
+static int build_fake_ancestor(struct patch *list, const char *filename)
 {
 	struct patch *patch;
 	struct index_state result = { NULL };
 	static struct lock_file lock;
+	int res;
 
 	/* Once we start supporting the reverse patch, it may be
 	 * worth showing the new sha1 prefix, but until then...
@@ -3922,31 +3923,38 @@ static void build_fake_ancestor(struct patch *list, const char *filename)
 			if (!preimage_sha1_in_gitlink_patch(patch, sha1))
 				; /* ok, the textual part looks sane */
 			else
-				die("sha1 information is lacking or useless for submodule %s",
-				    name);
+				return error("sha1 information is lacking or "
+					     "useless for submodule %s", name);
 		} else if (!get_sha1_blob(patch->old_sha1_prefix, sha1)) {
 			; /* ok */
 		} else if (!patch->lines_added && !patch->lines_deleted) {
 			/* mode-only change: update the current */
 			if (get_current_sha1(patch->old_name, sha1))
-				die("mode change for %s, which is not "
-				    "in current HEAD", name);
+				return error("mode change for %s, which is not "
+					     "in current HEAD", name);
 		} else
-			die("sha1 information is lacking or useless "
-			    "(%s).", name);
+			return error("sha1 information is lacking or useless "
+				     "(%s).", name);
 
 		ce = make_cache_entry(patch->old_mode, sha1, name, 0, 0);
 		if (!ce)
-			die(_("make_cache_entry failed for path '%s'"), name);
-		if (add_index_entry(&result, ce, ADD_CACHE_OK_TO_ADD))
-			die ("Could not add %s to temporary index", name);
+			return error(_("make_cache_entry failed for path '%s'"),
+				     name);
+		if (add_index_entry(&result, ce, ADD_CACHE_OK_TO_ADD)) {
+			free(ce);
+			return error("Could not add %s to temporary index",
+				     name);
+		}
 	}
 
 	hold_lock_file_for_update(&lock, filename, LOCK_DIE_ON_ERROR);
-	if (write_locked_index(&result, &lock, COMMIT_LOCK))
-		die ("Could not write temporary index to %s", filename);
-
+	res = write_locked_index(&result, &lock, COMMIT_LOCK);
 	discard_index(&result);
+
+	if (res)
+		return error("Could not write temporary index to %s", filename);
+
+	return 0;
 }
 
 static void stat_patch_list(struct apply_state *state, struct patch *patch)
@@ -4495,8 +4503,11 @@ static int apply_patch(struct apply_state *state,
 		goto end;
 	}
 
-	if (state->fake_ancestor)
-		build_fake_ancestor(list, state->fake_ancestor);
+	if (state->fake_ancestor &&
+	    build_fake_ancestor(list, state->fake_ancestor)) {
+		res = -128;
+		goto end;
+	}
 
 	if (state->diffstat)
 		stat_patch_list(state, list);
-- 
2.9.2.614.g4980f51

[PATCH v10 20/40] builtin/apply: make remove_file() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", remove_file() should return -1 instead of
calling die().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 575981b..27fb6e2 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4085,17 +4085,18 @@ static void patch_stats(struct apply_state *state, struct patch *patch)
 	}
 }
 
-static void remove_file(struct apply_state *state, struct patch *patch, int rmdir_empty)
+static int remove_file(struct apply_state *state, struct patch *patch, int rmdir_empty)
 {
 	if (state->update_index) {
 		if (remove_file_from_cache(patch->old_name) < 0)
-			die(_("unable to remove %s from index"), patch->old_name);
+			return error(_("unable to remove %s from index"), patch->old_name);
 	}
 	if (!state->cached) {
 		if (!remove_or_warn(patch->old_mode, patch->old_name) && rmdir_empty) {
 			remove_path(patch->old_name);
 		}
 	}
+	return 0;
 }
 
 static void add_index_file(struct apply_state *state,
@@ -4274,8 +4275,10 @@ static void write_out_one_result(struct apply_state *state,
 				 int phase)
 {
 	if (patch->is_delete > 0) {
-		if (phase == 0)
-			remove_file(state, patch, 1);
+		if (phase == 0) {
+			if (remove_file(state, patch, 1))
+				exit(128);
+		}
 		return;
 	}
 	if (patch->is_new > 0 || patch->is_copy) {
@@ -4287,8 +4290,10 @@ static void write_out_one_result(struct apply_state *state,
 	 * Rename or modification boils down to the same
 	 * thing: remove the old, write the new
 	 */
-	if (phase == 0)
-		remove_file(state, patch, patch->is_rename);
+	if (phase == 0) {
+		if (remove_file(state, patch, patch->is_rename))
+			exit(128);
+	}
 	if (phase == 1)
 		create_file(state, patch);
 }
-- 
2.9.2.614.g4980f51

[PATCH v10 21/40] builtin/apply: make add_conflicted_stages_file() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", add_conflicted_stages_file() should return -1
instead of calling die().

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 27fb6e2..ad0b875 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4224,7 +4224,7 @@ static void create_one_file(struct apply_state *state,
 	die_errno(_("unable to write file '%s' mode %o"), path, mode);
 }
 
-static void add_conflicted_stages_file(struct apply_state *state,
+static int add_conflicted_stages_file(struct apply_state *state,
 				       struct patch *patch)
 {
 	int stage, namelen;
@@ -4232,7 +4232,7 @@ static void add_conflicted_stages_file(struct apply_state *state,
 	struct cache_entry *ce;
 
 	if (!state->update_index)
-		return;
+		return 0;
 	namelen = strlen(patch->new_name);
 	ce_size = cache_entry_size(namelen);
 	mode = patch->new_mode ? patch->new_mode : (S_IFREG | 0644);
@@ -4247,9 +4247,14 @@ static void add_conflicted_stages_file(struct apply_state *state,
 		ce->ce_flags = create_ce_flags(stage);
 		ce->ce_namelen = namelen;
 		hashcpy(ce->sha1, patch->threeway_stage[stage - 1].hash);
-		if (add_cache_entry(ce, ADD_CACHE_OK_TO_ADD) < 0)
-			die(_("unable to add cache entry for %s"), patch->new_name);
+		if (add_cache_entry(ce, ADD_CACHE_OK_TO_ADD) < 0) {
+			free(ce);
+			return error(_("unable to add cache entry for %s"),
+				     patch->new_name);
+		}
 	}
+
+	return 0;
 }
 
 static void create_file(struct apply_state *state, struct patch *patch)
@@ -4263,9 +4268,10 @@ static void create_file(struct apply_state *state, struct patch *patch)
 		mode = S_IFREG | 0644;
 	create_one_file(state, path, mode, buf, size);
 
-	if (patch->conflicted_threeway)
-		add_conflicted_stages_file(state, patch);
-	else
+	if (patch->conflicted_threeway) {
+		if (add_conflicted_stages_file(state, patch))
+			exit(128);
+	} else
 		add_index_file(state, path, mode, buf, size);
 }
 
-- 
2.9.2.614.g4980f51

[PATCH v10 22/40] builtin/apply: make add_index_file() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", add_index_file() should return -1 instead of
calling die().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 48 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 17 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index ad0b875..a646900 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4099,11 +4099,11 @@ static int remove_file(struct apply_state *state, struct patch *patch, int rmdir
 	return 0;
 }
 
-static void add_index_file(struct apply_state *state,
-			   const char *path,
-			   unsigned mode,
-			   void *buf,
-			   unsigned long size)
+static int add_index_file(struct apply_state *state,
+			  const char *path,
+			  unsigned mode,
+			  void *buf,
+			  unsigned long size)
 {
 	struct stat st;
 	struct cache_entry *ce;
@@ -4111,7 +4111,7 @@ static void add_index_file(struct apply_state *state,
 	unsigned ce_size = cache_entry_size(namelen);
 
 	if (!state->update_index)
-		return;
+		return 0;
 
 	ce = xcalloc(1, ce_size);
 	memcpy(ce->name, path, namelen);
@@ -4122,20 +4122,32 @@ static void add_index_file(struct apply_state *state,
 		const char *s;
 
 		if (!skip_prefix(buf, "Subproject commit ", &s) ||
-		    get_sha1_hex(s, ce->sha1))
-			die(_("corrupt patch for submodule %s"), path);
+		    get_sha1_hex(s, ce->sha1)) {
+			free(ce);
+			return error(_("corrupt patch for submodule %s"), path);
+		}
 	} else {
 		if (!state->cached) {
-			if (lstat(path, &st) < 0)
-				die_errno(_("unable to stat newly created file '%s'"),
-					  path);
+			if (lstat(path, &st) < 0) {
+				free(ce);
+				return error(_("unable to stat newly "
+					       "created file '%s': %s"),
+					     path, strerror(errno));
+			}
 			fill_stat_cache_info(ce, &st);
 		}
-		if (write_sha1_file(buf, size, blob_type, ce->sha1) < 0)
-			die(_("unable to create backing store for newly created file %s"), path);
+		if (write_sha1_file(buf, size, blob_type, ce->sha1) < 0) {
+			free(ce);
+			return error(_("unable to create backing store "
+				       "for newly created file %s"), path);
+		}
 	}
-	if (add_cache_entry(ce, ADD_CACHE_OK_TO_ADD) < 0)
-		die(_("unable to add cache entry for %s"), path);
+	if (add_cache_entry(ce, ADD_CACHE_OK_TO_ADD) < 0) {
+		free(ce);
+		return error(_("unable to add cache entry for %s"), path);
+	}
+
+	return 0;
 }
 
 static int try_create_file(const char *path, unsigned int mode, const char *buf, unsigned long size)
@@ -4271,8 +4283,10 @@ static void create_file(struct apply_state *state, struct patch *patch)
 	if (patch->conflicted_threeway) {
 		if (add_conflicted_stages_file(state, patch))
 			exit(128);
-	} else
-		add_index_file(state, path, mode, buf, size);
+	} else {
+		if (add_index_file(state, path, mode, buf, size))
+			exit(128);
+	}
 }
 
 /* phase zero is to remove, phase one is to create */
-- 
2.9.2.614.g4980f51

[PATCH v10 23/40] builtin/apply: make create_file() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", create_file() should just return what
add_conflicted_stages_file() and add_index_file() are returning
instead of calling exit().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index a646900..fdfeab0 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4269,7 +4269,7 @@ static int add_conflicted_stages_file(struct apply_state *state,
 	return 0;
 }
 
-static void create_file(struct apply_state *state, struct patch *patch)
+static int create_file(struct apply_state *state, struct patch *patch)
 {
 	char *path = patch->new_name;
 	unsigned mode = patch->new_mode;
@@ -4280,13 +4280,10 @@ static void create_file(struct apply_state *state, struct patch *patch)
 		mode = S_IFREG | 0644;
 	create_one_file(state, path, mode, buf, size);
 
-	if (patch->conflicted_threeway) {
-		if (add_conflicted_stages_file(state, patch))
-			exit(128);
-	} else {
-		if (add_index_file(state, path, mode, buf, size))
-			exit(128);
-	}
+	if (patch->conflicted_threeway)
+		return add_conflicted_stages_file(state, patch);
+	else
+		return add_index_file(state, path, mode, buf, size);
 }
 
 /* phase zero is to remove, phase one is to create */
@@ -4302,8 +4299,10 @@ static void write_out_one_result(struct apply_state *state,
 		return;
 	}
 	if (patch->is_new > 0 || patch->is_copy) {
-		if (phase == 1)
-			create_file(state, patch);
+		if (phase == 1) {
+			if (create_file(state, patch))
+				exit(128);
+		}
 		return;
 	}
 	/*
@@ -4314,8 +4313,10 @@ static void write_out_one_result(struct apply_state *state,
 		if (remove_file(state, patch, patch->is_rename))
 			exit(128);
 	}
-	if (phase == 1)
-		create_file(state, patch);
+	if (phase == 1) {
+		if (create_file(state, patch))
+			exit(128);
+	}
 }
 
 static int write_out_one_reject(struct apply_state *state, struct patch *patch)
-- 
2.9.2.614.g4980f51

[PATCH v10 24/40] builtin/apply: make write_out_one_result() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", write_out_one_result() should just return what
remove_file() and create_file() are returning instead of calling
exit().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 38 ++++++++++++++++----------------------
 1 file changed, 16 insertions(+), 22 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index fdfeab0..003acec 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4287,36 +4287,29 @@ static int create_file(struct apply_state *state, struct patch *patch)
 }
 
 /* phase zero is to remove, phase one is to create */
-static void write_out_one_result(struct apply_state *state,
-				 struct patch *patch,
-				 int phase)
+static int write_out_one_result(struct apply_state *state,
+				struct patch *patch,
+				int phase)
 {
 	if (patch->is_delete > 0) {
-		if (phase == 0) {
-			if (remove_file(state, patch, 1))
-				exit(128);
-		}
-		return;
+		if (phase == 0)
+			return remove_file(state, patch, 1);
+		return 0;
 	}
 	if (patch->is_new > 0 || patch->is_copy) {
-		if (phase == 1) {
-			if (create_file(state, patch))
-				exit(128);
-		}
-		return;
+		if (phase == 1)
+			return create_file(state, patch);
+		return 0;
 	}
 	/*
 	 * Rename or modification boils down to the same
 	 * thing: remove the old, write the new
 	 */
-	if (phase == 0) {
-		if (remove_file(state, patch, patch->is_rename))
-			exit(128);
-	}
-	if (phase == 1) {
-		if (create_file(state, patch))
-			exit(128);
-	}
+	if (phase == 0)
+		return remove_file(state, patch, patch->is_rename);
+	if (phase == 1)
+		return create_file(state, patch);
+	return 0;
 }
 
 static int write_out_one_reject(struct apply_state *state, struct patch *patch)
@@ -4403,7 +4396,8 @@ static int write_out_results(struct apply_state *state, struct patch *list)
 			if (l->rejected)
 				errs = 1;
 			else {
-				write_out_one_result(state, l, phase);
+				if (write_out_one_result(state, l, phase))
+					exit(128);
 				if (phase == 1) {
 					if (write_out_one_reject(state, l))
 						errs = 1;
-- 
2.9.2.614.g4980f51

[PATCH v10 25/40] builtin/apply: make write_out_results() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", write_out_results() should return -1 instead of
calling exit().

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 003acec..c787ead 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4383,6 +4383,12 @@ static int write_out_one_reject(struct apply_state *state, struct patch *patch)
 	return -1;
 }
 
+/*
+ * Returns:
+ *  -1 if an error happened
+ *   0 if the patch applied cleanly
+ *   1 if the patch did not apply cleanly
+ */
 static int write_out_results(struct apply_state *state, struct patch *list)
 {
 	int phase;
@@ -4396,8 +4402,10 @@ static int write_out_results(struct apply_state *state, struct patch *list)
 			if (l->rejected)
 				errs = 1;
 			else {
-				if (write_out_one_result(state, l, phase))
-					exit(128);
+				if (write_out_one_result(state, l, phase)) {
+					string_list_clear(&cpath, 0);
+					return -1;
+				}
 				if (phase == 1) {
 					if (write_out_one_reject(state, l))
 						errs = 1;
@@ -4517,10 +4525,17 @@ static int apply_patch(struct apply_state *state,
 		}
 	}
 
-	if (state->apply && write_out_results(state, list)) {
-		/* with --3way, we still need to write the index out */
-		res = state->apply_with_reject ? -1 : 1;
-		goto end;
+	if (state->apply) {
+		int write_res = write_out_results(state, list);
+		if (write_res < 0) {
+			res = -128;
+			goto end;
+		}
+		if (write_res > 0) {
+			/* with --3way, we still need to write the index out */
+			res = state->apply_with_reject ? -1 : 1;
+			goto end;
+		}
 	}
 
 	if (state->fake_ancestor &&
-- 
2.9.2.614.g4980f51

[PATCH v10 26/40] builtin/apply: make try_create_file() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", try_create_file() should return -1 in case of
error.

Unfortunately try_create_file() currently returns -1 to signal a
recoverable error. To fix that, let's make it return 1 in case of
a recoverable error and -1 in case of an unrecoverable error.

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 44 +++++++++++++++++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 11 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index c787ead..9372999 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4150,38 +4150,48 @@ static int add_index_file(struct apply_state *state,
 	return 0;
 }
 
+/*
+ * Returns:
+ *  -1 if an unrecoverable error happened
+ *   0 if everything went well
+ *   1 if a recoverable error happened
+ */
 static int try_create_file(const char *path, unsigned int mode, const char *buf, unsigned long size)
 {
-	int fd;
+	int fd, res;
 	struct strbuf nbuf = STRBUF_INIT;
 
 	if (S_ISGITLINK(mode)) {
 		struct stat st;
 		if (!lstat(path, &st) && S_ISDIR(st.st_mode))
 			return 0;
-		return mkdir(path, 0777);
+		return !!mkdir(path, 0777);
 	}
 
 	if (has_symlinks && S_ISLNK(mode))
 		/* Although buf:size is counted string, it also is NUL
 		 * terminated.
 		 */
-		return symlink(buf, path);
+		return !!symlink(buf, path);
 
 	fd = open(path, O_CREAT | O_EXCL | O_WRONLY, (mode & 0100) ? 0777 : 0666);
 	if (fd < 0)
-		return -1;
+		return 1;
 
 	if (convert_to_working_tree(path, buf, size, &nbuf)) {
 		size = nbuf.len;
 		buf  = nbuf.buf;
 	}
-	write_or_die(fd, buf, size);
+
+	res = write_in_full(fd, buf, size) < 0;
+	if (res)
+		error_errno(_("failed to write to '%s'"), path);
 	strbuf_release(&nbuf);
 
-	if (close(fd) < 0)
-		die_errno(_("closing file '%s'"), path);
-	return 0;
+	if (close(fd) < 0 && !res)
+		return error(_("closing file '%s': %s"), path, strerror(errno));
+
+	return res ? -1 : 0;
 }
 
 /*
@@ -4195,15 +4205,24 @@ static void create_one_file(struct apply_state *state,
 			    const char *buf,
 			    unsigned long size)
 {
+	int res;
+
 	if (state->cached)
 		return;
-	if (!try_create_file(path, mode, buf, size))
+
+	res = try_create_file(path, mode, buf, size);
+	if (res < 0)
+		exit(128);
+	if (!res)
 		return;
 
 	if (errno == ENOENT) {
 		if (safe_create_leading_directories(path))
 			return;
-		if (!try_create_file(path, mode, buf, size))
+		res = try_create_file(path, mode, buf, size);
+		if (res < 0)
+			exit(128);
+		if (!res)
 			return;
 	}
 
@@ -4222,7 +4241,10 @@ static void create_one_file(struct apply_state *state,
 		for (;;) {
 			char newpath[PATH_MAX];
 			mksnpath(newpath, sizeof(newpath), "%s~%u", path, nr);
-			if (!try_create_file(newpath, mode, buf, size)) {
+			res = try_create_file(newpath, mode, buf, size);
+			if (res < 0)
+				exit(128);
+			if (!res) {
 				if (!rename(newpath, path))
 					return;
 				unlink_or_warn(newpath);
-- 
2.9.2.614.g4980f51

[PATCH v10 27/40] builtin/apply: make create_one_file() return -1 on error

[Christian Couder]

To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.

To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", create_one_file() should return -1 instead of
calling exit().

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 36 +++++++++++++++++++++---------------
 1 file changed, 21 insertions(+), 15 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index 9372999..ad403f8 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4198,32 +4198,36 @@ static int try_create_file(const char *path, unsigned int mode, const char *buf,
  * We optimistically assume that the directories exist,
  * which is true 99% of the time anyway. If they don't,
  * we create them and try again.
+ *
+ * Returns:
+ *   -1 on error
+ *   0 otherwise
  */
-static void create_one_file(struct apply_state *state,
-			    char *path,
-			    unsigned mode,
-			    const char *buf,
-			    unsigned long size)
+static int create_one_file(struct apply_state *state,
+			   char *path,
+			   unsigned mode,
+			   const char *buf,
+			   unsigned long size)
 {
 	int res;
 
 	if (state->cached)
-		return;
+		return 0;
 
 	res = try_create_file(path, mode, buf, size);
 	if (res < 0)
-		exit(128);
+		return -1;
 	if (!res)
-		return;
+		return 0;
 
 	if (errno == ENOENT) {
 		if (safe_create_leading_directories(path))
-			return;
+			return 0;
 		res = try_create_file(path, mode, buf, size);
 		if (res < 0)
-			exit(128);
+			return -1;
 		if (!res)
-			return;
+			return 0;
 	}
 
 	if (errno == EEXIST || errno == EACCES) {
@@ -4243,10 +4247,10 @@ static void create_one_file(struct apply_state *state,
 			mksnpath(newpath, sizeof(newpath), "%s~%u", path, nr);
 			res = try_create_file(newpath, mode, buf, size);
 			if (res < 0)
-				exit(128);
+				return -1;
 			if (!res) {
 				if (!rename(newpath, path))
-					return;
+					return 0;
 				unlink_or_warn(newpath);
 				break;
 			}
@@ -4255,7 +4259,8 @@ static void create_one_file(struct apply_state *state,
 			++nr;
 		}
 	}
-	die_errno(_("unable to write file '%s' mode %o"), path, mode);
+	return error_errno(_("unable to write file '%s' mode %o"),
+			   path, mode);
 }
 
 static int add_conflicted_stages_file(struct apply_state *state,
@@ -4300,7 +4305,8 @@ static int create_file(struct apply_state *state, struct patch *patch)
 
 	if (!mode)
 		mode = S_IFREG | 0644;
-	create_one_file(state, path, mode, buf, size);
+	if (create_one_file(state, path, mode, buf, size))
+		return -1;
 
 	if (patch->conflicted_threeway)
 		return add_conflicted_stages_file(state, patch);
-- 
2.9.2.614.g4980f51

[PATCH v10 28/40] builtin/apply: rename option parsing functions

[Christian Couder]

As these functions are going to be part of the libified
apply api, let's give them a name that is more specific
to the apply api.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/apply.c | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/builtin/apply.c b/builtin/apply.c
index ad403f8..429fe44 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4588,16 +4588,16 @@ static int apply_patch(struct apply_state *state,
 	return res;
 }
 
-static int option_parse_exclude(const struct option *opt,
-				const char *arg, int unset)
+static int apply_option_parse_exclude(const struct option *opt,
+				      const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	add_name_limit(state, arg, 1);
 	return 0;
 }
 
-static int option_parse_include(const struct option *opt,
-				const char *arg, int unset)
+static int apply_option_parse_include(const struct option *opt,
+				      const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	add_name_limit(state, arg, 0);
@@ -4605,9 +4605,9 @@ static int option_parse_include(const struct option *opt,
 	return 0;
 }
 
-static int option_parse_p(const struct option *opt,
-			  const char *arg,
-			  int unset)
+static int apply_option_parse_p(const struct option *opt,
+				const char *arg,
+				int unset)
 {
 	struct apply_state *state = opt->value;
 	state->p_value = atoi(arg);
@@ -4615,8 +4615,8 @@ static int option_parse_p(const struct option *opt,
 	return 0;
 }
 
-static int option_parse_space_change(const struct option *opt,
-				     const char *arg, int unset)
+static int apply_option_parse_space_change(const struct option *opt,
+					   const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	if (unset)
@@ -4626,8 +4626,8 @@ static int option_parse_space_change(const struct option *opt,
 	return 0;
 }
 
-static int option_parse_whitespace(const struct option *opt,
-				   const char *arg, int unset)
+static int apply_option_parse_whitespace(const struct option *opt,
+					 const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	state->whitespace_option = arg;
@@ -4636,8 +4636,8 @@ static int option_parse_whitespace(const struct option *opt,
 	return 0;
 }
 
-static int option_parse_directory(const struct option *opt,
-				  const char *arg, int unset)
+static int apply_option_parse_directory(const struct option *opt,
+					const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	strbuf_reset(&state->root);
@@ -4755,13 +4755,13 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 	struct option builtin_apply_options[] = {
 		{ OPTION_CALLBACK, 0, "exclude", &state, N_("path"),
 			N_("don't apply changes matching the given path"),
-			0, option_parse_exclude },
+			0, apply_option_parse_exclude },
 		{ OPTION_CALLBACK, 0, "include", &state, N_("path"),
 			N_("apply changes matching the given path"),
-			0, option_parse_include },
+			0, apply_option_parse_include },
 		{ OPTION_CALLBACK, 'p', NULL, &state, N_("num"),
 			N_("remove <num> leading slashes from traditional diff paths"),
-			0, option_parse_p },
+			0, apply_option_parse_p },
 		OPT_BOOL(0, "no-add", &state.no_add,
 			N_("ignore additions made by the patch")),
 		OPT_BOOL(0, "stat", &state.diffstat,
@@ -4793,13 +4793,13 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 				N_("ensure at least <n> lines of context match")),
 		{ OPTION_CALLBACK, 0, "whitespace", &state, N_("action"),
 			N_("detect new or modified lines that have whitespace errors"),
-			0, option_parse_whitespace },
+			0, apply_option_parse_whitespace },
 		{ OPTION_CALLBACK, 0, "ignore-space-change", &state, NULL,
 			N_("ignore changes in whitespace when finding context"),
-			PARSE_OPT_NOARG, option_parse_space_change },
+			PARSE_OPT_NOARG, apply_option_parse_space_change },
 		{ OPTION_CALLBACK, 0, "ignore-whitespace", &state, NULL,
 			N_("ignore changes in whitespace when finding context"),
-			PARSE_OPT_NOARG, option_parse_space_change },
+			PARSE_OPT_NOARG, apply_option_parse_space_change },
 		OPT_BOOL('R', "reverse", &state.apply_in_reverse,
 			N_("apply the patch in reverse")),
 		OPT_BOOL(0, "unidiff-zero", &state.unidiff_zero,
@@ -4817,7 +4817,7 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 			RECOUNT),
 		{ OPTION_CALLBACK, 0, "directory", &state, N_("root"),
 			N_("prepend <root> to all filenames"),
-			0, option_parse_directory },
+			0, apply_option_parse_directory },
 		OPT_END()
 	};
 
-- 
2.9.2.614.g4980f51

Re: [PATCH v10 28/40] builtin/apply: rename option parsing functions

[stefan.naewe]

Am 08.08.2016 um 23:03 schrieb Christian Couder:
> As these functions are going to be part of the libified
> apply api, let's give them a name that is more specific
> to the apply api.

s/api/API/

> 
> Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
> ---
>  builtin/apply.c | 40 ++++++++++++++++++++--------------------
>  1 file changed, 20 insertions(+), 20 deletions(-)
> 
> diff --git a/builtin/apply.c b/builtin/apply.c
> index ad403f8..429fe44 100644
> --- a/builtin/apply.c
> +++ b/builtin/apply.c
> @@ -4588,16 +4588,16 @@ static int apply_patch(struct apply_state *state,
>  	return res;
>  }
>  
> -static int option_parse_exclude(const struct option *opt,
> -				const char *arg, int unset)
> +static int apply_option_parse_exclude(const struct option *opt,
> +				      const char *arg, int unset)
>  {
>  	struct apply_state *state = opt->value;
>  	add_name_limit(state, arg, 1);
>  	return 0;
>  }
>  
> -static int option_parse_include(const struct option *opt,
> -				const char *arg, int unset)
> +static int apply_option_parse_include(const struct option *opt,
> +				      const char *arg, int unset)
>  {
>  	struct apply_state *state = opt->value;
>  	add_name_limit(state, arg, 0);
> @@ -4605,9 +4605,9 @@ static int option_parse_include(const struct option *opt,
>  	return 0;
>  }
>  
> -static int option_parse_p(const struct option *opt,
> -			  const char *arg,
> -			  int unset)
> +static int apply_option_parse_p(const struct option *opt,
> +				const char *arg,
> +				int unset)
>  {
>  	struct apply_state *state = opt->value;
>  	state->p_value = atoi(arg);
> @@ -4615,8 +4615,8 @@ static int option_parse_p(const struct option *opt,
>  	return 0;
>  }
>  
> -static int option_parse_space_change(const struct option *opt,
> -				     const char *arg, int unset)
> +static int apply_option_parse_space_change(const struct option *opt,
> +					   const char *arg, int unset)
>  {
>  	struct apply_state *state = opt->value;
>  	if (unset)
> @@ -4626,8 +4626,8 @@ static int option_parse_space_change(const struct option *opt,
>  	return 0;
>  }
>  
> -static int option_parse_whitespace(const struct option *opt,
> -				   const char *arg, int unset)
> +static int apply_option_parse_whitespace(const struct option *opt,
> +					 const char *arg, int unset)
>  {
>  	struct apply_state *state = opt->value;
>  	state->whitespace_option = arg;
> @@ -4636,8 +4636,8 @@ static int option_parse_whitespace(const struct option *opt,
>  	return 0;
>  }
>  
> -static int option_parse_directory(const struct option *opt,
> -				  const char *arg, int unset)
> +static int apply_option_parse_directory(const struct option *opt,
> +					const char *arg, int unset)
>  {
>  	struct apply_state *state = opt->value;
>  	strbuf_reset(&state->root);
> @@ -4755,13 +4755,13 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
>  	struct option builtin_apply_options[] = {
>  		{ OPTION_CALLBACK, 0, "exclude", &state, N_("path"),
>  			N_("don't apply changes matching the given path"),
> -			0, option_parse_exclude },
> +			0, apply_option_parse_exclude },
>  		{ OPTION_CALLBACK, 0, "include", &state, N_("path"),
>  			N_("apply changes matching the given path"),
> -			0, option_parse_include },
> +			0, apply_option_parse_include },
>  		{ OPTION_CALLBACK, 'p', NULL, &state, N_("num"),
>  			N_("remove <num> leading slashes from traditional diff paths"),
> -			0, option_parse_p },
> +			0, apply_option_parse_p },
>  		OPT_BOOL(0, "no-add", &state.no_add,
>  			N_("ignore additions made by the patch")),
>  		OPT_BOOL(0, "stat", &state.diffstat,
> @@ -4793,13 +4793,13 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
>  				N_("ensure at least <n> lines of context match")),
>  		{ OPTION_CALLBACK, 0, "whitespace", &state, N_("action"),
>  			N_("detect new or modified lines that have whitespace errors"),
> -			0, option_parse_whitespace },
> +			0, apply_option_parse_whitespace },
>  		{ OPTION_CALLBACK, 0, "ignore-space-change", &state, NULL,
>  			N_("ignore changes in whitespace when finding context"),
> -			PARSE_OPT_NOARG, option_parse_space_change },
> +			PARSE_OPT_NOARG, apply_option_parse_space_change },
>  		{ OPTION_CALLBACK, 0, "ignore-whitespace", &state, NULL,
>  			N_("ignore changes in whitespace when finding context"),
> -			PARSE_OPT_NOARG, option_parse_space_change },
> +			PARSE_OPT_NOARG, apply_option_parse_space_change },
>  		OPT_BOOL('R', "reverse", &state.apply_in_reverse,
>  			N_("apply the patch in reverse")),
>  		OPT_BOOL(0, "unidiff-zero", &state.unidiff_zero,
> @@ -4817,7 +4817,7 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
>  			RECOUNT),
>  		{ OPTION_CALLBACK, 0, "directory", &state, N_("root"),
>  			N_("prepend <root> to all filenames"),
> -			0, option_parse_directory },
> +			0, apply_option_parse_directory },
>  		OPT_END()
>  	};
>  
> 


-- 
----------------------------------------------------------------
/dev/random says: Don't be so humble, you're not that great. -Golda Meir
python -c "print '73746566616e2e6e616577654061746c61732d656c656b74726f6e696b2e636f6d'.decode('hex')" 
GPG Key fingerprint = 2DF5 E01B 09C3 7501 BCA9  9666 829B 49C5 9221 27AF

[PATCH v10 29/40] apply: rename and move opt constants to apply.h

[Christian Couder]

The constants for the "inaccurate-eof" and the "recount" options will
be used in both "apply.c" and "builtin/apply.c", so they need to go
into "apply.h", and therefore they need a name that is more specific
to the API they belong to.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.h         |  3 +++
 builtin/apply.c | 11 ++++-------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/apply.h b/apply.h
index 53f09b5..ca1dcee 100644
--- a/apply.h
+++ b/apply.h
@@ -108,4 +108,7 @@ extern int init_apply_state(struct apply_state *state,
 extern void clear_apply_state(struct apply_state *state);
 extern int check_apply_state(struct apply_state *state, int force_apply);
 
+#define APPLY_OPT_INACCURATE_EOF	(1<<0)
+#define APPLY_OPT_RECOUNT		(1<<1)
+
 #endif
diff --git a/builtin/apply.c b/builtin/apply.c
index 429fe44..9c396bb 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -4463,9 +4463,6 @@ static int write_out_results(struct apply_state *state, struct patch *list)
 
 static struct lock_file lock_file;
 
-#define INACCURATE_EOF	(1<<0)
-#define RECOUNT		(1<<1)
-
 /*
  * Try to apply a patch.
  *
@@ -4495,8 +4492,8 @@ static int apply_patch(struct apply_state *state,
 		int nr;
 
 		patch = xcalloc(1, sizeof(*patch));
-		patch->inaccurate_eof = !!(options & INACCURATE_EOF);
-		patch->recount =  !!(options & RECOUNT);
+		patch->inaccurate_eof = !!(options & APPLY_OPT_INACCURATE_EOF);
+		patch->recount =  !!(options & APPLY_OPT_RECOUNT);
 		nr = parse_chunk(state, buf.buf + offset, buf.len - offset, patch);
 		if (nr < 0) {
 			free_patch(patch);
@@ -4811,10 +4808,10 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 		OPT__VERBOSE(&state.apply_verbosely, N_("be verbose")),
 		OPT_BIT(0, "inaccurate-eof", &options,
 			N_("tolerate incorrectly detected missing new-line at the end of file"),
-			INACCURATE_EOF),
+			APPLY_OPT_INACCURATE_EOF),
 		OPT_BIT(0, "recount", &options,
 			N_("do not trust the line counts in the hunk headers"),
-			RECOUNT),
+			APPLY_OPT_RECOUNT),
 		{ OPTION_CALLBACK, 0, "directory", &state, N_("root"),
 			N_("prepend <root> to all filenames"),
 			0, apply_option_parse_directory },
-- 
2.9.2.614.g4980f51

[PATCH v10 31/40] apply: make some parsing functions static again

[Christian Couder]

Some parsing functions that were used in both "apply.c" and
"builtin/apply.c" are now only used in the former, so they
can be made static to "apply.c".

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c | 6 +++---
 apply.h | 5 -----
 2 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/apply.c b/apply.c
index 7b96130..c0cb3f5 100644
--- a/apply.c
+++ b/apply.c
@@ -27,7 +27,7 @@ static void git_apply_config(void)
 	git_config(git_default_config, NULL);
 }
 
-int parse_whitespace_option(struct apply_state *state, const char *option)
+static int parse_whitespace_option(struct apply_state *state, const char *option)
 {
 	if (!option) {
 		state->ws_error_action = warn_on_ws_error;
@@ -57,8 +57,8 @@ int parse_whitespace_option(struct apply_state *state, const char *option)
 	return error(_("unrecognized whitespace option '%s'"), option);
 }
 
-int parse_ignorewhitespace_option(struct apply_state *state,
-				  const char *option)
+static int parse_ignorewhitespace_option(struct apply_state *state,
+						 const char *option)
 {
 	if (!option || !strcmp(option, "no") ||
 	    !strcmp(option, "false") || !strcmp(option, "never") ||
diff --git a/apply.h b/apply.h
index 5ec022c..df44b51 100644
--- a/apply.h
+++ b/apply.h
@@ -97,11 +97,6 @@ struct apply_state {
 	int applied_after_fixing_ws;
 };
 
-extern int parse_whitespace_option(struct apply_state *state,
-				   const char *option);
-extern int parse_ignorewhitespace_option(struct apply_state *state,
-					 const char *option);
-
 extern int apply_option_parse_exclude(const struct option *opt,
 				      const char *arg, int unset);
 extern int apply_option_parse_include(const struct option *opt,
-- 
2.9.2.614.g4980f51

[PATCH v10 32/40] apply: use error_errno() where possible

[Christian Couder]

To avoid possible mistakes and to uniformly show the errno
related messages, let's use error_errno() where possible.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/apply.c b/apply.c
index c0cb3f5..41a33d3 100644
--- a/apply.c
+++ b/apply.c
@@ -3497,7 +3497,7 @@ static int load_current(struct apply_state *state,
 	ce = active_cache[pos];
 	if (lstat(name, &st)) {
 		if (errno != ENOENT)
-			return error(_("%s: %s"), name, strerror(errno));
+			return error_errno("%s", name);
 		if (checkout_target(&the_index, ce, &st))
 			return -1;
 	}
@@ -3647,7 +3647,7 @@ static int check_preimage(struct apply_state *state,
 	} else if (!state->cached) {
 		stat_ret = lstat(old_name, st);
 		if (stat_ret && errno != ENOENT)
-			return error(_("%s: %s"), old_name, strerror(errno));
+			return error_errno("%s", old_name);
 	}
 
 	if (state->check_index && !previous) {
@@ -3669,7 +3669,7 @@ static int check_preimage(struct apply_state *state,
 	} else if (stat_ret < 0) {
 		if (patch->is_new < 0)
 			goto is_new;
-		return error(_("%s: %s"), old_name, strerror(errno));
+		return error_errno("%s", old_name);
 	}
 
 	if (!state->cached && !previous)
@@ -3728,7 +3728,7 @@ static int check_to_create(struct apply_state *state,
 
 		return EXISTS_IN_WORKTREE;
 	} else if ((errno != ENOENT) && (errno != ENOTDIR)) {
-		return error("%s: %s", new_name, strerror(errno));
+		return error_errno("%s", new_name);
 	}
 	return 0;
 }
@@ -4247,9 +4247,9 @@ static int add_index_file(struct apply_state *state,
 		if (!state->cached) {
 			if (lstat(path, &st) < 0) {
 				free(ce);
-				return error(_("unable to stat newly "
-					       "created file '%s': %s"),
-					     path, strerror(errno));
+				return error_errno(_("unable to stat newly "
+						     "created file '%s'"),
+						   path);
 			}
 			fill_stat_cache_info(ce, &st);
 		}
@@ -4306,7 +4306,7 @@ static int try_create_file(const char *path, unsigned int mode, const char *buf,
 	strbuf_release(&nbuf);
 
 	if (close(fd) < 0 && !res)
-		return error(_("closing file '%s': %s"), path, strerror(errno));
+		return error_errno(_("closing file '%s'"), path);
 
 	return res ? -1 : 0;
 }
@@ -4503,7 +4503,7 @@ static int write_out_one_reject(struct apply_state *state, struct patch *patch)
 
 	rej = fopen(namebuf, "w");
 	if (!rej)
-		return error(_("cannot open %s: %s"), namebuf, strerror(errno));
+		return error_errno(_("cannot open %s"), namebuf);
 
 	/* Normal git tools never deal with .rej, so do not pretend
 	 * this is a git patch by saying --git or giving extended
-- 
2.9.2.614.g4980f51

[PATCH v10 33/40] environment: add set_index_file()

[Christian Couder]

Introduce set_index_file() to be able to temporarily change the
index file.

Yeah, this is a short cut and this new function should not be used
by other code.

It adds a small technical debt, because unfortunately a very big
technical debt already exists as the apply code and a lot of other
"libified" code already call functions like read_cache(),
discard_cache() and cache_name_pos() instead of functions like
read_index_from(), discard_index() and index_name_pos() that are
available when the NO_THE_INDEX_COMPATIBILITY_MACROS env variable
is defined.

Avoiding this small new technical debt is unfortunately not as simple
as just changing these functions in "apply.c", as these functions can
be called by other "libified" code that can indirectly be called by
apply code.

For example cache_name_pos() is used in "dir.c" and "diff.c", and then
"dir.h" and "diff.h" are included in many other "libified" *.c files
(including "apply.c"). So it is very difficult to make sure that apply
code doesn't indirectly call any of the problematic functions.

And even if it was possible to make sure that now "apply.c" doesn't
indirectly call any of these functions, how could we make sure that
later a refactoring in other "libified" code will not change a
function that is indirectly called by "apply.c" to make it call another
function that indirectly calls a problematic function?

So it's a different project altogether to remove calls to problematic
functions (like read_cache(), discard_cache(), cache_name_pos() and so
on) in all the libified code, starting maybe with "dir.c" and "diff.c".

Now if someone really needs to use this new function, it should be
used like this:

    /* Save current index file */
    old_index_file = get_index_file();
    set_index_file((char *)tmp_index_file);

    /* Do stuff that will use tmp_index_file as the index file */
    ...

    /* When finished reset the index file */
    set_index_file(old_index_file);

It is intended to be used by builtins commands, in fact only `git am`,
to temporarily change the index file used by libified code.

This is useful when libified code uses the global index, but a builtin
command wants another index file to be used instead.

Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 cache.h       | 13 +++++++++++++
 environment.c | 16 ++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/cache.h b/cache.h
index b5f76a4..c9ad7f9 100644
--- a/cache.h
+++ b/cache.h
@@ -471,6 +471,19 @@ extern const char *strip_namespace(const char *namespaced_ref);
 extern const char *get_git_work_tree(void);
 
 /*
+ * Hack to temporarily change the index.
+ * Yeah, the libification of 'apply' took a short-circuit by adding
+ * this technical debt.
+ * Please use functions available when
+ * NO_THE_INDEX_COMPATIBILITY_MACROS is defined, instead of this
+ * function.
+ * If you really need to use this function, please save the current
+ * index file using get_index_file() before changing the index
+ * file. And when finished, reset it to the saved value.
+ */
+extern void set_index_file(char *index_file);
+
+/*
  * Return true if the given path is a git directory; note that this _just_
  * looks at the directory itself. If you want to know whether "foo/.git"
  * is a repository, you must feed that path, not just "foo".
diff --git a/environment.c b/environment.c
index ca72464..55b2b6b 100644
--- a/environment.c
+++ b/environment.c
@@ -292,6 +292,22 @@ int odb_pack_keep(char *name, size_t namesz, const unsigned char *sha1)
 	return open(name, O_RDWR|O_CREAT|O_EXCL, 0600);
 }
 
+/*
+ * Hack to temporarily change the index.
+ * Yeah, the libification of 'apply' took a short-circuit by adding
+ * this technical debt.
+ * Please use functions available when
+ * NO_THE_INDEX_COMPATIBILITY_MACROS is defined, instead of this
+ * function.
+ * If you really need to use this function, please save the current
+ * index file using get_index_file() before changing the index
+ * file. And when finished, reset it to the saved value.
+ */
+void set_index_file(char *index_file)
+{
+	git_index_file = index_file;
+}
+
 char *get_index_file(void)
 {
 	if (!git_index_file)
-- 
2.9.2.614.g4980f51

Re: [PATCH v10 33/40] environment: add set_index_file()

[Junio C Hamano]

Christian Couder <christian.couder@gmail.com> writes:

> Now if someone really needs to use this new function, it should be
> used like this:
>
>     /* Save current index file */
>     old_index_file = get_index_file();
>     set_index_file((char *)tmp_index_file);
>
>     /* Do stuff that will use tmp_index_file as the index file */
>     ...
>
>     /* When finished reset the index file */
>     set_index_file(old_index_file);
>
> It is intended to be used by builtins commands, in fact only `git am`,
> to temporarily change the index file used by libified code.
>
> This is useful when libified code uses the global index, but a builtin
> command wants another index file to be used instead.

That is OK, but I do not think NO_THE_INDEX_COMPATIBILITY_MACROS has
much to do with this hack.  Even if you stop using the_index and
have the caller pass its own temporary index_state, that structure
does *not* know which file to read the (temporary) index from, or
which file to write the (temporary) index to.  In fact, apply.c
already does this in build_fake_ancestor():

    static int build_fake_ancestor(struct patch *list, const char *filename)
    {
            ...
            hold_lock_file_for_update(&lock, filename, LOCK_DIE_ON_ERROR);
            res = write_locked_index(&result, &lock, COMMIT_LOCK);
            ...
    }

As you can see, this function works with a non-standard/default
index file _without_ having to use non-default index_state.  What
the set_index_file() hack allows you to do is to use interface that
does *NOT* pass "filename" like the caller does to this function.

Isn't the mention on NO_THE_INDEX_COMPATIBILITY_MACROS in the added
comments (there are two) pure red-herring?

Re: [PATCH v10 33/40] environment: add set_index_file()

[Christian Couder]

On Tue, Aug 9, 2016 at 12:13 AM, Junio C Hamano <gitster@pobox.com> wrote:
> Christian Couder <christian.couder@gmail.com> writes:
>
>> Now if someone really needs to use this new function, it should be
>> used like this:
>>
>>     /* Save current index file */
>>     old_index_file = get_index_file();
>>     set_index_file((char *)tmp_index_file);
>>
>>     /* Do stuff that will use tmp_index_file as the index file */
>>     ...
>>
>>     /* When finished reset the index file */
>>     set_index_file(old_index_file);
>>
>> It is intended to be used by builtins commands, in fact only `git am`,
>> to temporarily change the index file used by libified code.
>>
>> This is useful when libified code uses the global index, but a builtin
>> command wants another index file to be used instead.
>
> That is OK, but I do not think NO_THE_INDEX_COMPATIBILITY_MACROS has
> much to do with this hack.  Even if you stop using the_index and
> have the caller pass its own temporary index_state, that structure
> does *not* know which file to read the (temporary) index from, or
> which file to write the (temporary) index to.  In fact, apply.c
> already does this in build_fake_ancestor():
>
>     static int build_fake_ancestor(struct patch *list, const char *filename)
>     {
>             ...
>             hold_lock_file_for_update(&lock, filename, LOCK_DIE_ON_ERROR);
>             res = write_locked_index(&result, &lock, COMMIT_LOCK);
>             ...
>     }
>
> As you can see, this function works with a non-standard/default
> index file _without_ having to use non-default index_state.  What
> the set_index_file() hack allows you to do is to use interface that
> does *NOT* pass "filename" like the caller does to this function.
>
> Isn't the mention on NO_THE_INDEX_COMPATIBILITY_MACROS in the added
> comments (there are two) pure red-herring?

Yeah, true.

So do you want me to refactor the code to use
hold_lock_file_for_update() instead of hold_locked_index() and to
avoid the set_index_file() hack?

Or would the set_index_file() hack be ok with a commit message like
the following:

---
Introduce set_index_file() to be able to temporarily change the
index file.

Yeah, this is a short cut and this new function should not be used
by other code.

It adds a small technical debt, that could perhaps be avoided with a
refactoring and by using hold_lock_file_for_update() instead of
hold_locked_index() to pass the filename where the index should be
written.

Now if someone really needs to use this new function, it should be
used like this:

    /* Save current index file */
    old_index_file = get_index_file();
    set_index_file((char *)tmp_index_file);

    /* Do stuff that will use tmp_index_file as the index file */
    ...

    /* When finished reset the index file */
    set_index_file(old_index_file);

It is intended to be used by builtins commands, in fact only `git am`,
to temporarily change the index file used by libified code.

This is useful when libified code uses the global index, but a builtin
command wants another index file to be used instead.
---

And with comments like this on top of set_index_file() definition and
declaration:

/*
 * Hack to temporarily change the index.
 * Yeah, the libification of 'apply' took a short-circuit by adding
 * this technical debt.
 * Please set the filename using for example hold_lock_file_for_update(),
 * instead of this function.
 * If you really need to use this function, please save the current
 * index file using get_index_file() before changing the index
 * file. And when finished, reset it to the saved value.
 */

?

Re: [PATCH v10 33/40] environment: add set_index_file()

[Junio C Hamano]

Christian Couder <christian.couder@gmail.com> writes:

>> Isn't the mention on NO_THE_INDEX_COMPATIBILITY_MACROS in the added
>> comments (there are two) pure red-herring?
>
> Yeah, true.
>
> So do you want me to refactor the code to use
> hold_lock_file_for_update() instead of hold_locked_index() and to
> avoid the set_index_file() hack?

I somehow thought that we already agreed to accept the technical
debt, taking your "it is too much work" assessment at the face
value.  If you now think it is feasible within the scope of the
series, of course we'd prefer it done "right" ;-)

> Or would the set_index_file() hack be ok with a commit message like
> the following:
>
> ---
> Introduce set_index_file() to be able to temporarily change the
> index file.
>
> Yeah, this is a short cut and this new function should not be used
> by other code.
>
> It adds a small technical debt, that could perhaps be avoided with a
> refactoring and by using hold_lock_file_for_update() instead of
> hold_locked_index() to pass the filename where the index should be
> written.

Is the problematic hold_locked_index() something you do yourself, or
buried deep inside the callchain of a helper function you use?  I am
sensing that it is the latter (otherwise you wouldn't be doing the
hack or at least will trivially fixing it up in a later "now we did
a faithful conversion from the previous code using GIT_INDEX_FILE
enviornment variable in an earlier step. Let's clean it up by being
in full control of what file we read from and write to" step in the
series).

Do you also have an issue on the reading side (i.e. you write it out
to temporary file and then later re-read the in-core cache from that
temporary file, for example)?  Or is a single "write to a temporary
index" the only thing you need to work around?  

The "Yeah, this is a short cut ..." admission of guilt is much much
less interesting than showing later people a way forward when they
help us by cleaning up the mess we decided to leave behind for
expediency.  I am not seeing that "here are the callchains that need
to be proper refactored, if we want to avoid this hack" yet; but
that is what would help them.

Thanks.

Re: [PATCH v10 33/40] environment: add set_index_file()

[Christian Couder]

On Wed, Aug 10, 2016 at 7:34 PM, Junio C Hamano <gitster@pobox.com> wrote:
> Christian Couder <christian.couder@gmail.com> writes:
>
>>> Isn't the mention on NO_THE_INDEX_COMPATIBILITY_MACROS in the added
>>> comments (there are two) pure red-herring?
>>
>> Yeah, true.
>>
>> So do you want me to refactor the code to use
>> hold_lock_file_for_update() instead of hold_locked_index() and to
>> avoid the set_index_file() hack?
>
> I somehow thought that we already agreed to accept the technical
> debt, taking your "it is too much work" assessment at the face
> value.  If you now think it is feasible within the scope of the
> series, of course we'd prefer it done "right" ;-)

Yeah, it is feasible and perhaps even simpler using
hold_lock_file_for_update() than with set_index_file(), so I dropped
the set_index_file() patch and added a new one that uses
hold_lock_file_for_update().
Sorry to have understood only recently what you said in some previous
emails and thanks for the explanations.

> Is the problematic hold_locked_index() something you do yourself, or
> buried deep inside the callchain of a helper function you use?

It is something done by the apply code, so we can easily modify that.

>  I am
> sensing that it is the latter (otherwise you wouldn't be doing the
> hack or at least will trivially fixing it up in a later "now we did
> a faithful conversion from the previous code using GIT_INDEX_FILE
> enviornment variable in an earlier step. Let's clean it up by being
> in full control of what file we read from and write to" step in the
> series).

It was more a misunderstanding of how the index related functions are working.

> Do you also have an issue on the reading side (i.e. you write it out
> to temporary file and then later re-read the in-core cache from that
> temporary file, for example)?  Or is a single "write to a temporary
> index" the only thing you need to work around?

It looks like it is the latter.

Thanks,
Christian.

Re: [PATCH v10 33/40] environment: add set_index_file()

[Junio C Hamano]

Christian Couder <christian.couder@gmail.com> writes:

> Yeah, it is feasible and perhaps even simpler using
> hold_lock_file_for_update() than with set_index_file(), so I
> dropped the set_index_file() patch and added a new one that uses
> hold_lock_file_for_update().

I wasn't paying too close an attention while reading the changes,
but anyway that is a great news.

Thanks.

[PATCH v10 34/40] apply: make it possible to silently apply

[Christian Couder]

This changes 'int apply_verbosely' into 'enum apply_verbosity', and
changes the possible values of the variable from a bool to
a tristate.

The previous 'false' state is changed into 'verbosity_normal'.
The previous 'true' state is changed into 'verbosity_verbose'.

The new added state is 'verbosity_silent'. It should prevent
anything to be printed on both stderr and stdout.

This is needed because `git am` wants to first call apply
functionality silently, if it can then fall back on 3-way merge
in case of error.

Printing on stdout, and calls to warning() or error() are not
taken care of in this patch, as that will be done in following
patches.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c         | 62 +++++++++++++++++++++++++++++++++++++--------------------
 apply.h         |  8 +++++++-
 builtin/apply.c |  2 +-
 3 files changed, 48 insertions(+), 24 deletions(-)

diff --git a/apply.c b/apply.c
index 41a33d3..df85cbc 100644
--- a/apply.c
+++ b/apply.c
@@ -125,8 +125,11 @@ int check_apply_state(struct apply_state *state, int force_apply)
 			return error(_("--3way outside a repository"));
 		state->check_index = 1;
 	}
-	if (state->apply_with_reject)
-		state->apply = state->apply_verbosely = 1;
+	if (state->apply_with_reject) {
+		state->apply = 1;
+		if (state->apply_verbosity == verbosity_normal)
+			state->apply_verbosity = verbosity_verbose;
+	}
 	if (!force_apply && (state->diffstat || state->numstat || state->summary || state->check || state->fake_ancestor))
 		state->apply = 0;
 	if (state->check_index && is_not_gitdir)
@@ -1620,8 +1623,9 @@ static void record_ws_error(struct apply_state *state,
 		return;
 
 	err = whitespace_error_string(result);
-	fprintf(stderr, "%s:%d: %s.\n%.*s\n",
-		state->patch_input_file, linenr, err, len, line);
+	if (state->apply_verbosity > verbosity_silent)
+		fprintf(stderr, "%s:%d: %s.\n%.*s\n",
+			state->patch_input_file, linenr, err, len, line);
 	free(err);
 }
 
@@ -1816,7 +1820,7 @@ static int parse_single_patch(struct apply_state *state,
 		return error(_("new file %s depends on old contents"), patch->new_name);
 	if (0 < patch->is_delete && newlines)
 		return error(_("deleted file %s still has contents"), patch->old_name);
-	if (!patch->is_delete && !newlines && context)
+	if (!patch->is_delete && !newlines && context && state->apply_verbosity > verbosity_silent)
 		fprintf_ln(stderr,
 			   _("** warning: "
 			     "file %s becomes empty but is not deleted"),
@@ -2911,7 +2915,7 @@ static int apply_one_fragment(struct apply_state *state,
 			/* Ignore it, we already handled it */
 			break;
 		default:
-			if (state->apply_verbosely)
+			if (state->apply_verbosity > verbosity_normal)
 				error(_("invalid start of line: '%c'"), first);
 			applied_pos = -1;
 			goto out;
@@ -3026,7 +3030,7 @@ static int apply_one_fragment(struct apply_state *state,
 				state->apply = 0;
 		}
 
-		if (state->apply_verbosely && applied_pos != pos) {
+		if (state->apply_verbosity > verbosity_normal && applied_pos != pos) {
 			int offset = applied_pos - pos;
 			if (state->apply_in_reverse)
 				offset = 0 - offset;
@@ -3041,14 +3045,14 @@ static int apply_one_fragment(struct apply_state *state,
 		 * Warn if it was necessary to reduce the number
 		 * of context lines.
 		 */
-		if ((leading != frag->leading) ||
-		    (trailing != frag->trailing))
+		if ((leading != frag->leading ||
+		     trailing != frag->trailing) && state->apply_verbosity > verbosity_silent)
 			fprintf_ln(stderr, _("Context reduced to (%ld/%ld)"
 					     " to apply fragment at %d"),
 				   leading, trailing, applied_pos+1);
 		update_image(state, img, applied_pos, &preimage, &postimage);
 	} else {
-		if (state->apply_verbosely)
+		if (state->apply_verbosity > verbosity_normal)
 			error(_("while searching for:\n%.*s"),
 			      (int)(old - oldlines), oldlines);
 	}
@@ -3539,7 +3543,8 @@ static int try_threeway(struct apply_state *state,
 		 read_blob_object(&buf, pre_sha1, patch->old_mode))
 		return error("repository lacks the necessary blob to fall back on 3-way merge.");
 
-	fprintf(stderr, "Falling back to three-way merge...\n");
+	if (state->apply_verbosity > verbosity_silent)
+		fprintf(stderr, "Falling back to three-way merge...\n");
 
 	img = strbuf_detach(&buf, &len);
 	prepare_image(&tmp_image, img, len, 1);
@@ -3569,7 +3574,9 @@ static int try_threeway(struct apply_state *state,
 	status = three_way_merge(image, patch->new_name,
 				 pre_sha1, our_sha1, post_sha1);
 	if (status < 0) {
-		fprintf(stderr, "Failed to fall back on three-way merge...\n");
+		if (state->apply_verbosity > verbosity_silent)
+			fprintf(stderr,
+				"Failed to fall back on three-way merge...\n");
 		return status;
 	}
 
@@ -3581,9 +3588,15 @@ static int try_threeway(struct apply_state *state,
 			hashcpy(patch->threeway_stage[0].hash, pre_sha1);
 		hashcpy(patch->threeway_stage[1].hash, our_sha1);
 		hashcpy(patch->threeway_stage[2].hash, post_sha1);
-		fprintf(stderr, "Applied patch to '%s' with conflicts.\n", patch->new_name);
+		if (state->apply_verbosity > verbosity_silent)
+			fprintf(stderr,
+				"Applied patch to '%s' with conflicts.\n",
+				patch->new_name);
 	} else {
-		fprintf(stderr, "Applied patch to '%s' cleanly.\n", patch->new_name);
+		if (state->apply_verbosity > verbosity_silent)
+			fprintf(stderr,
+				"Applied patch to '%s' cleanly.\n",
+				patch->new_name);
 	}
 	return 0;
 }
@@ -3956,7 +3969,7 @@ static int check_patch_list(struct apply_state *state, struct patch *patch)
 	prepare_fn_table(state, patch);
 	while (patch) {
 		int res;
-		if (state->apply_verbosely)
+		if (state->apply_verbosity > verbosity_normal)
 			say_patch_name(stderr,
 				       _("Checking patch %s..."), patch);
 		res = check_patch(state, patch);
@@ -4472,7 +4485,7 @@ static int write_out_one_reject(struct apply_state *state, struct patch *patch)
 	}
 
 	if (!cnt) {
-		if (state->apply_verbosely)
+		if (state->apply_verbosity > verbosity_normal)
 			say_patch_name(stderr,
 				       _("Applied patch %s cleanly."), patch);
 		return 0;
@@ -4489,7 +4502,8 @@ static int write_out_one_reject(struct apply_state *state, struct patch *patch)
 			    "Applying patch %%s with %d rejects...",
 			    cnt),
 		    cnt);
-	say_patch_name(stderr, sb.buf, patch);
+	if (state->apply_verbosity > verbosity_silent)
+		say_patch_name(stderr, sb.buf, patch);
 	strbuf_release(&sb);
 
 	cnt = strlen(patch->new_name);
@@ -4516,10 +4530,12 @@ static int write_out_one_reject(struct apply_state *state, struct patch *patch)
 	     frag;
 	     cnt++, frag = frag->next) {
 		if (!frag->rejected) {
-			fprintf_ln(stderr, _("Hunk #%d applied cleanly."), cnt);
+			if (state->apply_verbosity > verbosity_silent)
+				fprintf_ln(stderr, _("Hunk #%d applied cleanly."), cnt);
 			continue;
 		}
-		fprintf_ln(stderr, _("Rejected hunk #%d."), cnt);
+		if (state->apply_verbosity > verbosity_silent)
+			fprintf_ln(stderr, _("Rejected hunk #%d."), cnt);
 		fprintf(rej, "%.*s", frag->size, frag->patch);
 		if (frag->patch[frag->size-1] != '\n')
 			fputc('\n', rej);
@@ -4568,8 +4584,10 @@ static int write_out_results(struct apply_state *state, struct patch *list)
 		struct string_list_item *item;
 
 		string_list_sort(&cpath);
-		for_each_string_list_item(item, &cpath)
-			fprintf(stderr, "U %s\n", item->string);
+		if (state->apply_verbosity > verbosity_silent) {
+			for_each_string_list_item(item, &cpath)
+				fprintf(stderr, "U %s\n", item->string);
+		}
 		string_list_clear(&cpath, 0);
 
 		rerere(0);
@@ -4626,7 +4644,7 @@ static int apply_patch(struct apply_state *state,
 			listp = &patch->next;
 		}
 		else {
-			if (state->apply_verbosely)
+			if (state->apply_verbosity > verbosity_normal)
 				say_patch_name(stderr, _("Skipped patch '%s'."), patch);
 			free_patch(patch);
 			skipped_patch++;
diff --git a/apply.h b/apply.h
index df44b51..bd4eb6d 100644
--- a/apply.h
+++ b/apply.h
@@ -13,6 +13,12 @@ enum apply_ws_ignore {
 	ignore_ws_change
 };
 
+enum apply_verbosity {
+	verbosity_silent = -1,
+	verbosity_normal = 0,
+	verbosity_verbose = 1
+};
+
 /*
  * We need to keep track of how symlinks in the preimage are
  * manipulated by the patches.  A patch to add a/b/c where a/b
@@ -51,13 +57,13 @@ struct apply_state {
 	int allow_overlap;
 	int apply_in_reverse;
 	int apply_with_reject;
-	int apply_verbosely;
 	int no_add;
 	int threeway;
 	int unidiff_zero;
 	int unsafe_paths;
 
 	/* Other non boolean parameters */
+	enum apply_verbosity apply_verbosity;
 	const char *fake_ancestor;
 	const char *patch_input_file;
 	int line_termination;
diff --git a/builtin/apply.c b/builtin/apply.c
index 9c66474..7338701 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -74,7 +74,7 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 			N_("leave the rejected hunks in corresponding *.rej files")),
 		OPT_BOOL(0, "allow-overlap", &state.allow_overlap,
 			N_("allow overlapping hunks")),
-		OPT__VERBOSE(&state.apply_verbosely, N_("be verbose")),
+		OPT__VERBOSE(&state.apply_verbosity, N_("be verbose")),
 		OPT_BIT(0, "inaccurate-eof", &options,
 			N_("tolerate incorrectly detected missing new-line at the end of file"),
 			APPLY_OPT_INACCURATE_EOF),
-- 
2.9.2.614.g4980f51

[PATCH v10 35/40] apply: don't print on stdout in verbosity_silent mode

[Christian Couder]

When apply_verbosity is set to verbosity_silent nothing should be
printed on both stderr and stdout.

To avoid printing on stdout, we can just skip calling the following
functions:

	- stat_patch_list(),
	- numstat_patch_list(),
	- summary_patch_list().

It is safe to do that because the above functions have no side
effects other than printing:

- stat_patch_list() only computes some local values and then call
show_stats() and print_stat_summary(), those two functions only
compute local values and call printing functions,
- numstat_patch_list() also only computes local values and calls
printing functions,
- summary_patch_list() calls show_file_mode_name(), printf(),
show_rename_copy(), show_mode_change() that are only printing.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/apply.c b/apply.c
index df85cbc..ddbb0a2 100644
--- a/apply.c
+++ b/apply.c
@@ -4702,13 +4702,13 @@ static int apply_patch(struct apply_state *state,
 		goto end;
 	}
 
-	if (state->diffstat)
+	if (state->diffstat && state->apply_verbosity > verbosity_silent)
 		stat_patch_list(state, list);
 
-	if (state->numstat)
+	if (state->numstat && state->apply_verbosity > verbosity_silent)
 		numstat_patch_list(state, list);
 
-	if (state->summary)
+	if (state->summary && state->apply_verbosity > verbosity_silent)
 		summary_patch_list(list);
 
 end:
-- 
2.9.2.614.g4980f51

[PATCH v10 36/40] usage: add set_warn_routine()

[Christian Couder]

There are already set_die_routine() and set_error_routine(),
so let's add set_warn_routine() as this will be needed in a
following commit.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 git-compat-util.h | 1 +
 usage.c           | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/git-compat-util.h b/git-compat-util.h
index 590bfdd..c7a51f8 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -440,6 +440,7 @@ static inline int const_error(void)
 
 extern void set_die_routine(NORETURN_PTR void (*routine)(const char *err, va_list params));
 extern void set_error_routine(void (*routine)(const char *err, va_list params));
+extern void set_warn_routine(void (*routine)(const char *warn, va_list params));
 extern void set_die_is_recursing_routine(int (*routine)(void));
 extern void set_error_handle(FILE *);
 
diff --git a/usage.c b/usage.c
index 1dad03f..67e5526 100644
--- a/usage.c
+++ b/usage.c
@@ -70,6 +70,11 @@ void set_error_routine(void (*routine)(const char *err, va_list params))
 	error_routine = routine;
 }
 
+void set_warn_routine(void (*routine)(const char *warn, va_list params))
+{
+	warn_routine = routine;
+}
+
 void set_die_is_recursing_routine(int (*routine)(void))
 {
 	die_is_recursing = routine;
-- 
2.9.2.614.g4980f51

[PATCH v10 37/40] usage: add get_error_routine() and get_warn_routine()

[Christian Couder]

Let's make it possible to get the current error_routine and warn_routine,
so that we can store them before using set_error_routine() or
set_warn_routine() to use new ones.

This way we will be able put back the original routines, when we are done
with using new ones.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 git-compat-util.h |  2 ++
 usage.c           | 10 ++++++++++
 2 files changed, 12 insertions(+)

diff --git a/git-compat-util.h b/git-compat-util.h
index c7a51f8..de04df1 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -440,7 +440,9 @@ static inline int const_error(void)
 
 extern void set_die_routine(NORETURN_PTR void (*routine)(const char *err, va_list params));
 extern void set_error_routine(void (*routine)(const char *err, va_list params));
+extern void (*get_error_routine(void))(const char *err, va_list params);
 extern void set_warn_routine(void (*routine)(const char *warn, va_list params));
+extern void (*get_warn_routine(void))(const char *warn, va_list params);
 extern void set_die_is_recursing_routine(int (*routine)(void));
 extern void set_error_handle(FILE *);
 
diff --git a/usage.c b/usage.c
index 67e5526..2fd3045 100644
--- a/usage.c
+++ b/usage.c
@@ -70,11 +70,21 @@ void set_error_routine(void (*routine)(const char *err, va_list params))
 	error_routine = routine;
 }
 
+void (*get_error_routine(void))(const char *err, va_list params)
+{
+	return error_routine;
+}
+
 void set_warn_routine(void (*routine)(const char *warn, va_list params))
 {
 	warn_routine = routine;
 }
 
+void (*get_warn_routine(void))(const char *warn, va_list params)
+{
+	return warn_routine;
+}
+
 void set_die_is_recursing_routine(int (*routine)(void))
 {
 	die_is_recursing = routine;
-- 
2.9.2.614.g4980f51

[PATCH v10 38/40] apply: change error_routine when silent

[Christian Couder]

To avoid printing anything when applying with
`state->apply_verbosity == verbosity_silent`, let's save the
existing warn and error routines before applying, and let's
replace them with a routine that does nothing.

Then after applying, let's restore the saved routines.

Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c | 21 ++++++++++++++++++++-
 apply.h |  8 ++++++++
 2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/apply.c b/apply.c
index ddbb0a2..bf81b70 100644
--- a/apply.c
+++ b/apply.c
@@ -112,6 +112,11 @@ void clear_apply_state(struct apply_state *state)
 	/* &state->fn_table is cleared at the end of apply_patch() */
 }
 
+static void mute_routine(const char *bla, va_list params)
+{
+	/* do nothing */
+}
+
 int check_apply_state(struct apply_state *state, int force_apply)
 {
 	int is_not_gitdir = !startup_info->have_repository;
@@ -144,6 +149,13 @@ int check_apply_state(struct apply_state *state, int force_apply)
 	if (!state->lock_file)
 		return error("BUG: state->lock_file should not be NULL");
 
+	if (state->apply_verbosity <= verbosity_silent) {
+		state->saved_error_routine = get_error_routine();
+		state->saved_warn_routine = get_warn_routine();
+		set_error_routine(mute_routine);
+		set_warn_routine(mute_routine);
+	}
+
 	return 0;
 }
 
@@ -4864,7 +4876,7 @@ int apply_all_patches(struct apply_state *state,
 		state->newfd = -1;
 	}
 
-	return !!errs;
+	res = !!errs;
 
 end:
 	if (state->newfd >= 0) {
@@ -4872,5 +4884,12 @@ int apply_all_patches(struct apply_state *state,
 		state->newfd = -1;
 	}
 
+	if (state->apply_verbosity <= verbosity_silent) {
+		set_error_routine(state->saved_error_routine);
+		set_warn_routine(state->saved_warn_routine);
+	}
+
+	if (res > -1)
+		return res;
 	return (res == -1 ? 1 : 128);
 }
diff --git a/apply.h b/apply.h
index bd4eb6d..5cde641 100644
--- a/apply.h
+++ b/apply.h
@@ -94,6 +94,14 @@ struct apply_state {
 	 */
 	struct string_list fn_table;
 
+	/*
+	 * This is to save reporting routines before using
+	 * set_error_routine() or set_warn_routine() to install muting
+	 * routines when in verbosity_silent mode.
+	 */
+	void (*saved_error_routine)(const char *err, va_list params);
+	void (*saved_warn_routine)(const char *warn, va_list params);
+
 	/* These control whitespace errors */
 	enum apply_ws_error_action ws_error_action;
 	enum apply_ws_ignore ws_ignore_action;
-- 
2.9.2.614.g4980f51

[PATCH v10 39/40] apply: refactor `git apply` option parsing

[Christian Couder]

Parsing `git apply` options can be useful to other commands that
want to call the libified apply functionality, because this way
they can easily pass some options from their own command line to
the libified apply functionality.

This will be used by `git am` in a following patch.

To make this possible, let's refactor the `git apply` option
parsing code into a new libified apply_parse_options() function.

Doing that makes it possible to remove some functions definitions
from "apply.h" and make them static in "apply.c".

Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 apply.c         | 103 +++++++++++++++++++++++++++++++++++++++++++++++++-------
 apply.h         |  18 +++-------
 builtin/apply.c |  74 ++--------------------------------------
 3 files changed, 97 insertions(+), 98 deletions(-)

diff --git a/apply.c b/apply.c
index bf81b70..2ec2a8a 100644
--- a/apply.c
+++ b/apply.c
@@ -4730,16 +4730,16 @@ static int apply_patch(struct apply_state *state,
 	return res;
 }
 
-int apply_option_parse_exclude(const struct option *opt,
-			       const char *arg, int unset)
+static int apply_option_parse_exclude(const struct option *opt,
+				      const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	add_name_limit(state, arg, 1);
 	return 0;
 }
 
-int apply_option_parse_include(const struct option *opt,
-			       const char *arg, int unset)
+static int apply_option_parse_include(const struct option *opt,
+				      const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	add_name_limit(state, arg, 0);
@@ -4747,9 +4747,9 @@ int apply_option_parse_include(const struct option *opt,
 	return 0;
 }
 
-int apply_option_parse_p(const struct option *opt,
-			 const char *arg,
-			 int unset)
+static int apply_option_parse_p(const struct option *opt,
+				const char *arg,
+				int unset)
 {
 	struct apply_state *state = opt->value;
 	state->p_value = atoi(arg);
@@ -4757,8 +4757,8 @@ int apply_option_parse_p(const struct option *opt,
 	return 0;
 }
 
-int apply_option_parse_space_change(const struct option *opt,
-				    const char *arg, int unset)
+static int apply_option_parse_space_change(const struct option *opt,
+					   const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	if (unset)
@@ -4768,8 +4768,8 @@ int apply_option_parse_space_change(const struct option *opt,
 	return 0;
 }
 
-int apply_option_parse_whitespace(const struct option *opt,
-				  const char *arg, int unset)
+static int apply_option_parse_whitespace(const struct option *opt,
+					 const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	state->whitespace_option = arg;
@@ -4778,8 +4778,8 @@ int apply_option_parse_whitespace(const struct option *opt,
 	return 0;
 }
 
-int apply_option_parse_directory(const struct option *opt,
-				 const char *arg, int unset)
+static int apply_option_parse_directory(const struct option *opt,
+					const char *arg, int unset)
 {
 	struct apply_state *state = opt->value;
 	strbuf_reset(&state->root);
@@ -4893,3 +4893,80 @@ int apply_all_patches(struct apply_state *state,
 		return res;
 	return (res == -1 ? 1 : 128);
 }
+
+int apply_parse_options(int argc, const char **argv,
+			struct apply_state *state,
+			int *force_apply, int *options,
+			const char * const *apply_usage)
+{
+	struct option builtin_apply_options[] = {
+		{ OPTION_CALLBACK, 0, "exclude", state, N_("path"),
+			N_("don't apply changes matching the given path"),
+			0, apply_option_parse_exclude },
+		{ OPTION_CALLBACK, 0, "include", state, N_("path"),
+			N_("apply changes matching the given path"),
+			0, apply_option_parse_include },
+		{ OPTION_CALLBACK, 'p', NULL, state, N_("num"),
+			N_("remove <num> leading slashes from traditional diff paths"),
+			0, apply_option_parse_p },
+		OPT_BOOL(0, "no-add", &state->no_add,
+			N_("ignore additions made by the patch")),
+		OPT_BOOL(0, "stat", &state->diffstat,
+			N_("instead of applying the patch, output diffstat for the input")),
+		OPT_NOOP_NOARG(0, "allow-binary-replacement"),
+		OPT_NOOP_NOARG(0, "binary"),
+		OPT_BOOL(0, "numstat", &state->numstat,
+			N_("show number of added and deleted lines in decimal notation")),
+		OPT_BOOL(0, "summary", &state->summary,
+			N_("instead of applying the patch, output a summary for the input")),
+		OPT_BOOL(0, "check", &state->check,
+			N_("instead of applying the patch, see if the patch is applicable")),
+		OPT_BOOL(0, "index", &state->check_index,
+			N_("make sure the patch is applicable to the current index")),
+		OPT_BOOL(0, "cached", &state->cached,
+			N_("apply a patch without touching the working tree")),
+		OPT_BOOL(0, "unsafe-paths", &state->unsafe_paths,
+			N_("accept a patch that touches outside the working area")),
+		OPT_BOOL(0, "apply", force_apply,
+			N_("also apply the patch (use with --stat/--summary/--check)")),
+		OPT_BOOL('3', "3way", &state->threeway,
+			 N_( "attempt three-way merge if a patch does not apply")),
+		OPT_FILENAME(0, "build-fake-ancestor", &state->fake_ancestor,
+			N_("build a temporary index based on embedded index information")),
+		/* Think twice before adding "--nul" synonym to this */
+		OPT_SET_INT('z', NULL, &state->line_termination,
+			N_("paths are separated with NUL character"), '\0'),
+		OPT_INTEGER('C', NULL, &state->p_context,
+				N_("ensure at least <n> lines of context match")),
+		{ OPTION_CALLBACK, 0, "whitespace", state, N_("action"),
+			N_("detect new or modified lines that have whitespace errors"),
+			0, apply_option_parse_whitespace },
+		{ OPTION_CALLBACK, 0, "ignore-space-change", state, NULL,
+			N_("ignore changes in whitespace when finding context"),
+			PARSE_OPT_NOARG, apply_option_parse_space_change },
+		{ OPTION_CALLBACK, 0, "ignore-whitespace", state, NULL,
+			N_("ignore changes in whitespace when finding context"),
+			PARSE_OPT_NOARG, apply_option_parse_space_change },
+		OPT_BOOL('R', "reverse", &state->apply_in_reverse,
+			N_("apply the patch in reverse")),
+		OPT_BOOL(0, "unidiff-zero", &state->unidiff_zero,
+			N_("don't expect at least one line of context")),
+		OPT_BOOL(0, "reject", &state->apply_with_reject,
+			N_("leave the rejected hunks in corresponding *.rej files")),
+		OPT_BOOL(0, "allow-overlap", &state->allow_overlap,
+			N_("allow overlapping hunks")),
+		OPT__VERBOSE(&state->apply_verbosity, N_("be verbose")),
+		OPT_BIT(0, "inaccurate-eof", options,
+			N_("tolerate incorrectly detected missing new-line at the end of file"),
+			APPLY_OPT_INACCURATE_EOF),
+		OPT_BIT(0, "recount", options,
+			N_("do not trust the line counts in the hunk headers"),
+			APPLY_OPT_RECOUNT),
+		{ OPTION_CALLBACK, 0, "directory", state, N_("root"),
+			N_("prepend <root> to all filenames"),
+			0, apply_option_parse_directory },
+		OPT_END()
+	};
+
+	return parse_options(argc, argv, state->prefix, builtin_apply_options, apply_usage, 0);
+}
diff --git a/apply.h b/apply.h
index 5cde641..e2b89e8 100644
--- a/apply.h
+++ b/apply.h
@@ -111,20 +111,10 @@ struct apply_state {
 	int applied_after_fixing_ws;
 };
 
-extern int apply_option_parse_exclude(const struct option *opt,
-				      const char *arg, int unset);
-extern int apply_option_parse_include(const struct option *opt,
-				      const char *arg, int unset);
-extern int apply_option_parse_p(const struct option *opt,
-				const char *arg,
-				int unset);
-extern int apply_option_parse_whitespace(const struct option *opt,
-					 const char *arg, int unset);
-extern int apply_option_parse_directory(const struct option *opt,
-					const char *arg, int unset);
-extern int apply_option_parse_space_change(const struct option *opt,
-					   const char *arg, int unset);
-
+extern int apply_parse_options(int argc, const char **argv,
+			       struct apply_state *state,
+			       int *force_apply, int *options,
+			       const char * const *apply_usage);
 extern int init_apply_state(struct apply_state *state,
 			    const char *prefix,
 			    struct lock_file *lock_file);
diff --git a/builtin/apply.c b/builtin/apply.c
index 7338701..81b9a61 100644
--- a/builtin/apply.c
+++ b/builtin/apply.c
@@ -18,80 +18,12 @@ int cmd_apply(int argc, const char **argv, const char *prefix)
 	int ret;
 	struct apply_state state;
 
-	struct option builtin_apply_options[] = {
-		{ OPTION_CALLBACK, 0, "exclude", &state, N_("path"),
-			N_("don't apply changes matching the given path"),
-			0, apply_option_parse_exclude },
-		{ OPTION_CALLBACK, 0, "include", &state, N_("path"),
-			N_("apply changes matching the given path"),
-			0, apply_option_parse_include },
-		{ OPTION_CALLBACK, 'p', NULL, &state, N_("num"),
-			N_("remove <num> leading slashes from traditional diff paths"),
-			0, apply_option_parse_p },
-		OPT_BOOL(0, "no-add", &state.no_add,
-			N_("ignore additions made by the patch")),
-		OPT_BOOL(0, "stat", &state.diffstat,
-			N_("instead of applying the patch, output diffstat for the input")),
-		OPT_NOOP_NOARG(0, "allow-binary-replacement"),
-		OPT_NOOP_NOARG(0, "binary"),
-		OPT_BOOL(0, "numstat", &state.numstat,
-			N_("show number of added and deleted lines in decimal notation")),
-		OPT_BOOL(0, "summary", &state.summary,
-			N_("instead of applying the patch, output a summary for the input")),
-		OPT_BOOL(0, "check", &state.check,
-			N_("instead of applying the patch, see if the patch is applicable")),
-		OPT_BOOL(0, "index", &state.check_index,
-			N_("make sure the patch is applicable to the current index")),
-		OPT_BOOL(0, "cached", &state.cached,
-			N_("apply a patch without touching the working tree")),
-		OPT_BOOL(0, "unsafe-paths", &state.unsafe_paths,
-			N_("accept a patch that touches outside the working area")),
-		OPT_BOOL(0, "apply", &force_apply,
-			N_("also apply the patch (use with --stat/--summary/--check)")),
-		OPT_BOOL('3', "3way", &state.threeway,
-			 N_( "attempt three-way merge if a patch does not apply")),
-		OPT_FILENAME(0, "build-fake-ancestor", &state.fake_ancestor,
-			N_("build a temporary index based on embedded index information")),
-		/* Think twice before adding "--nul" synonym to this */
-		OPT_SET_INT('z', NULL, &state.line_termination,
-			N_("paths are separated with NUL character"), '\0'),
-		OPT_INTEGER('C', NULL, &state.p_context,
-				N_("ensure at least <n> lines of context match")),
-		{ OPTION_CALLBACK, 0, "whitespace", &state, N_("action"),
-			N_("detect new or modified lines that have whitespace errors"),
-			0, apply_option_parse_whitespace },
-		{ OPTION_CALLBACK, 0, "ignore-space-change", &state, NULL,
-			N_("ignore changes in whitespace when finding context"),
-			PARSE_OPT_NOARG, apply_option_parse_space_change },
-		{ OPTION_CALLBACK, 0, "ignore-whitespace", &state, NULL,
-			N_("ignore changes in whitespace when finding context"),
-			PARSE_OPT_NOARG, apply_option_parse_space_change },
-		OPT_BOOL('R', "reverse", &state.apply_in_reverse,
-			N_("apply the patch in reverse")),
-		OPT_BOOL(0, "unidiff-zero", &state.unidiff_zero,
-			N_("don't expect at least one line of context")),
-		OPT_BOOL(0, "reject", &state.apply_with_reject,
-			N_("leave the rejected hunks in corresponding *.rej files")),
-		OPT_BOOL(0, "allow-overlap", &state.allow_overlap,
-			N_("allow overlapping hunks")),
-		OPT__VERBOSE(&state.apply_verbosity, N_("be verbose")),
-		OPT_BIT(0, "inaccurate-eof", &options,
-			N_("tolerate incorrectly detected missing new-line at the end of file"),
-			APPLY_OPT_INACCURATE_EOF),
-		OPT_BIT(0, "recount", &options,
-			N_("do not trust the line counts in the hunk headers"),
-			APPLY_OPT_RECOUNT),
-		{ OPTION_CALLBACK, 0, "directory", &state, N_("root"),
-			N_("prepend <root> to all filenames"),
-			0, apply_option_parse_directory },
-		OPT_END()
-	};
-
 	if (init_apply_state(&state, prefix, &lock_file))
 		exit(128);
 
-	argc = parse_options(argc, argv, state.prefix, builtin_apply_options,
-			apply_usage, 0);
+	argc = apply_parse_options(argc, argv,
+				   &state, &force_apply, &options,
+				   apply_usage);
 
 	if (check_apply_state(&state, force_apply))
 		exit(128);
-- 
2.9.2.614.g4980f51

[PATCH v10 40/40] builtin/am: use apply api in run_apply()

[Christian Couder]

This replaces run_apply() implementation with a new one that
uses the apply api that has been previously prepared in
apply.c and apply.h.

This shoud improve performance a lot in certain cases.

As the previous implementation was creating a new `git apply`
process to apply each patch, it could be slow on systems like
Windows where it is costly to create new processes.

Also the new `git apply` process had to read the index from
disk, and when the process was done the calling process
discarded its own index and read back from disk the new
index that had been created by the `git apply` process.

This could be very inefficient with big repositories that
have big index files, especially when the system decided
that it was a good idea to run the `git apply` processes on
a different processor core.

Also eliminating index reads enables further performance
improvements by using:

`git update-index --split-index`

For example here is a benchmark of a multi hundred commit
rebase on the Linux kernel on a Debian laptop with SSD:

command: git rebase --onto 1993b17 52bef0c 29dde7c

Vanilla "next" without split index:                1m54.953s
Vanilla "next" with split index:                   1m22.476s
This series on top of "next" without split index:  1m12.034s
This series on top of "next" with split index:     0m15.678s

(using branch "next" from mid April 2016.)

Benchmarked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 builtin/am.c | 65 +++++++++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 18 deletions(-)

diff --git a/builtin/am.c b/builtin/am.c
index b77bf11..54c5728 100644
--- a/builtin/am.c
+++ b/builtin/am.c
@@ -28,6 +28,7 @@
 #include "rerere.h"
 #include "prompt.h"
 #include "mailinfo.h"
+#include "apply.h"
 
 /**
  * Returns 1 if the file is empty or does not exist, 0 otherwise.
@@ -1522,39 +1523,67 @@ static int parse_mail_rebase(struct am_state *state, const char *mail)
  */
 static int run_apply(const struct am_state *state, const char *index_file)
 {
-	struct child_process cp = CHILD_PROCESS_INIT;
+	struct argv_array apply_paths = ARGV_ARRAY_INIT;
+	struct argv_array apply_opts = ARGV_ARRAY_INIT;
+	struct apply_state apply_state;
+	int res, opts_left;
+	char *save_index_file;
+	static struct lock_file lock_file;
+	int force_apply = 0;
+	int options = 0;
+
+	if (index_file) {
+		save_index_file = get_index_file();
+		set_index_file((char *)index_file);
+	}
 
-	cp.git_cmd = 1;
+	if (init_apply_state(&apply_state, NULL, &lock_file))
+		die("BUG: init_apply_state() failed");
+
+	argv_array_push(&apply_opts, "apply");
+	argv_array_pushv(&apply_opts, state->git_apply_opts.argv);
+
+	opts_left = apply_parse_options(apply_opts.argc, apply_opts.argv,
+					&apply_state, &force_apply, &options,
+					NULL);
+
+	if (opts_left != 0)
+		die("unknown option passed thru to git apply");
 
 	if (index_file)
-		argv_array_pushf(&cp.env_array, "GIT_INDEX_FILE=%s", index_file);
+		apply_state.cached = 1;
+	else
+		apply_state.check_index = 1;
 
 	/*
 	 * If we are allowed to fall back on 3-way merge, don't give false
 	 * errors during the initial attempt.
 	 */
-	if (state->threeway && !index_file) {
-		cp.no_stdout = 1;
-		cp.no_stderr = 1;
-	}
+	if (state->threeway && !index_file)
+		apply_state.apply_verbosity = verbosity_silent;
 
-	argv_array_push(&cp.args, "apply");
+	if (check_apply_state(&apply_state, force_apply))
+		die("BUG: check_apply_state() failed");
 
-	argv_array_pushv(&cp.args, state->git_apply_opts.argv);
+	argv_array_push(&apply_paths, am_path(state, "patch"));
+
+	res = apply_all_patches(&apply_state, apply_paths.argc, apply_paths.argv, options);
 
 	if (index_file)
-		argv_array_push(&cp.args, "--cached");
-	else
-		argv_array_push(&cp.args, "--index");
+		set_index_file(save_index_file);
 
-	argv_array_push(&cp.args, am_path(state, "patch"));
+	argv_array_clear(&apply_paths);
+	argv_array_clear(&apply_opts);
+	clear_apply_state(&apply_state);
 
-	if (run_command(&cp))
-		return -1;
+	if (res)
+		return res;
 
-	/* Reload index as git-apply will have modified it. */
-	discard_cache();
-	read_cache_from(index_file ? index_file : get_index_file());
+	if (index_file) {
+		/* Reload index as apply_all_patches() will have modified it. */
+		discard_cache();
+		read_cache_from(index_file);
+	}
 
 	return 0;
 }
-- 
2.9.2.614.g4980f51

Re: [PATCH v10 00/40] libify apply and use lib in am, part 2

[Christian Couder]

On Mon, Aug 8, 2016 at 11:02 PM, Christian Couder
<christian.couder@gmail.com> wrote:
>
> I will send a diff between this version and the previous one, as a
> reply to this email.

Here is the diff:

diff --git a/apply.c b/apply.c
index a73889e..2ec2a8a 100644
--- a/apply.c
+++ b/apply.c
@@ -4324,7 +4324,10 @@ static int try_create_file(const char *path,
unsigned int mode, const char *buf,
         size = nbuf.len;
         buf  = nbuf.buf;
     }
-    res = !write_or_whine_pipe(fd, buf, size, path);
+
+    res = write_in_full(fd, buf, size) < 0;
+    if (res)
+        error_errno(_("failed to write to '%s'"), path);
     strbuf_release(&nbuf);

     if (close(fd) < 0 && !res)
@@ -4626,7 +4629,7 @@ static int apply_patch(struct apply_state *state,
     int res = 0;

     state->patch_input_file = filename;
-    if (read_patch_file(&buf, fd))
+    if (read_patch_file(&buf, fd) < 0)
         return -128;
     offset = 0;
     while (offset < buf.len) {
@@ -4727,16 +4730,16 @@ static int apply_patch(struct apply_state *state,
     return res;
 }

-int apply_option_parse_exclude(const struct option *opt,
-                   const char *arg, int unset)
+static int apply_option_parse_exclude(const struct option *opt,
+                      const char *arg, int unset)
 {
     struct apply_state *state = opt->value;
     add_name_limit(state, arg, 1);
     return 0;
 }

-int apply_option_parse_include(const struct option *opt,
-                   const char *arg, int unset)
+static int apply_option_parse_include(const struct option *opt,
+                      const char *arg, int unset)
 {
     struct apply_state *state = opt->value;
     add_name_limit(state, arg, 0);
@@ -4744,9 +4747,9 @@ int apply_option_parse_include(const struct option *opt,
     return 0;
 }

-int apply_option_parse_p(const struct option *opt,
-             const char *arg,
-             int unset)
+static int apply_option_parse_p(const struct option *opt,
+                const char *arg,
+                int unset)
 {
     struct apply_state *state = opt->value;
     state->p_value = atoi(arg);
@@ -4754,8 +4757,8 @@ int apply_option_parse_p(const struct option *opt,
     return 0;
 }

-int apply_option_parse_space_change(const struct option *opt,
-                    const char *arg, int unset)
+static int apply_option_parse_space_change(const struct option *opt,
+                       const char *arg, int unset)
 {
     struct apply_state *state = opt->value;
     if (unset)
@@ -4765,8 +4768,8 @@ int apply_option_parse_space_change(const struct
option *opt,
     return 0;
 }

-int apply_option_parse_whitespace(const struct option *opt,
-                  const char *arg, int unset)
+static int apply_option_parse_whitespace(const struct option *opt,
+                     const char *arg, int unset)
 {
     struct apply_state *state = opt->value;
     state->whitespace_option = arg;
@@ -4775,8 +4778,8 @@ int apply_option_parse_whitespace(const struct
option *opt,
     return 0;
 }

-int apply_option_parse_directory(const struct option *opt,
-                 const char *arg, int unset)
+static int apply_option_parse_directory(const struct option *opt,
+                    const char *arg, int unset)
 {
     struct apply_state *state = opt->value;
     strbuf_reset(&state->root);
diff --git a/apply.h b/apply.h
index 27a3a7a..e2b89e8 100644
--- a/apply.h
+++ b/apply.h
@@ -16,7 +16,7 @@ enum apply_ws_ignore {
 enum apply_verbosity {
     verbosity_silent = -1,
     verbosity_normal = 0,
-    verbosity_verbose = 1,
+    verbosity_verbose = 1
 };

 /*
@@ -94,7 +94,11 @@ struct apply_state {
      */
     struct string_list fn_table;

-    /* This is to save some reporting routines */
+    /*
+     * This is to save reporting routines before using
+     * set_error_routine() or set_warn_routine() to install muting
+     * routines when in verbosity_silent mode.
+     */
     void (*saved_error_routine)(const char *err, va_list params);
     void (*saved_warn_routine)(const char *warn, va_list params);

@@ -107,20 +111,6 @@ struct apply_state {
     int applied_after_fixing_ws;
 };

-extern int apply_option_parse_exclude(const struct option *opt,
-                      const char *arg, int unset);
-extern int apply_option_parse_include(const struct option *opt,
-                      const char *arg, int unset);
-extern int apply_option_parse_p(const struct option *opt,
-                const char *arg,
-                int unset);
-extern int apply_option_parse_whitespace(const struct option *opt,
-                     const char *arg, int unset);
-extern int apply_option_parse_directory(const struct option *opt,
-                    const char *arg, int unset);
-extern int apply_option_parse_space_change(const struct option *opt,
-                       const char *arg, int unset);
-
 extern int apply_parse_options(int argc, const char **argv,
                    struct apply_state *state,
                    int *force_apply, int *options,
diff --git a/cache.h b/cache.h
index 18b96fe..c9ad7f9 100644
--- a/cache.h
+++ b/cache.h
@@ -461,7 +461,6 @@ extern int is_inside_work_tree(void);
 extern const char *get_git_dir(void);
 extern const char *get_git_common_dir(void);
 extern char *get_object_directory(void);
-extern void set_index_file(char *index_file);
 extern char *get_index_file(void);
 extern char *get_graft_file(void);
 extern int set_git_dir(const char *path);
@@ -472,6 +471,19 @@ extern const char *strip_namespace(const char
*namespaced_ref);
 extern const char *get_git_work_tree(void);

 /*
+ * Hack to temporarily change the index.
+ * Yeah, the libification of 'apply' took a short-circuit by adding
+ * this technical debt.
+ * Please use functions available when
+ * NO_THE_INDEX_COMPATIBILITY_MACROS is defined, instead of this
+ * function.
+ * If you really need to use this function, please save the current
+ * index file using get_index_file() before changing the index
+ * file. And when finished, reset it to the saved value.
+ */
+extern void set_index_file(char *index_file);
+
+/*
  * Return true if the given path is a git directory; note that this _just_
  * looks at the directory itself. If you want to know whether "foo/.git"
  * is a repository, you must feed that path, not just "foo".
diff --git a/environment.c b/environment.c
index eb23d01..55b2b6b 100644
--- a/environment.c
+++ b/environment.c
@@ -293,11 +293,15 @@ int odb_pack_keep(char *name, size_t namesz,
const unsigned char *sha1)
 }

 /*
- * Temporarily change the index file.
- * Please save the current index file using get_index_file() before changing
- * the index file. And when finished, reset it to the saved value.
- * Yeah, the libification of 'apply' took a short-circuit by adding this
- * technical debt; please do not call this function in new codepaths.
+ * Hack to temporarily change the index.
+ * Yeah, the libification of 'apply' took a short-circuit by adding
+ * this technical debt.
+ * Please use functions available when
+ * NO_THE_INDEX_COMPATIBILITY_MACROS is defined, instead of this
+ * function.
+ * If you really need to use this function, please save the current
+ * index file using get_index_file() before changing the index
+ * file. And when finished, reset it to the saved value.
  */
 void set_index_file(char *index_file)
 {
diff --git a/write_or_die.c b/write_or_die.c
index 26eeec8..9816879 100644
--- a/write_or_die.c
+++ b/write_or_die.c
@@ -87,7 +87,8 @@ int write_or_whine_pipe(int fd, const void *buf,
size_t count, const char *msg)
 {
     if (write_in_full(fd, buf, count) < 0) {
         check_pipe(errno);
-        warning("%s: write error (%s)\n", msg, strerror(errno));
+        fprintf(stderr, "%s: write error (%s)\n",
+            msg, strerror(errno));
         return 0;
     }

Re: [PATCH v10 00/40] libify apply and use lib in am, part 2

[Junio C Hamano]

Christian Couder <christian.couder@gmail.com> writes:

> diff --git a/apply.h b/apply.h
> index 27a3a7a..e2b89e8 100644
> --- a/apply.h
> +++ b/apply.h
> @@ -16,7 +16,7 @@ enum apply_ws_ignore {
>  enum apply_verbosity {
>      verbosity_silent = -1,
>      verbosity_normal = 0,
> -    verbosity_verbose = 1,
> +    verbosity_verbose = 1
>  };

Thanks for not forgetting this.

> @@ -107,20 +111,6 @@ struct apply_state {
>      int applied_after_fixing_ws;
>  };
>
> -extern int apply_option_parse_exclude(const struct option *opt,
> -                      const char *arg, int unset);
> -extern int apply_option_parse_include(const struct option *opt,
> -                      const char *arg, int unset);
> -extern int apply_option_parse_p(const struct option *opt,
> -                const char *arg,
> -                int unset);
> -extern int apply_option_parse_whitespace(const struct option *opt,
> -                     const char *arg, int unset);
> -extern int apply_option_parse_directory(const struct option *opt,
> -                    const char *arg, int unset);
> -extern int apply_option_parse_space_change(const struct option *opt,
> -                       const char *arg, int unset);
> -
>  extern int apply_parse_options(int argc, const char **argv,
>                     struct apply_state *state,
>                     int *force_apply, int *options,

Also these.