From: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
To: git@vger.kernel.org
Cc: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Subject: [PATCH 07/20] cvsserver: split up long lines in req_{status,diff,log}
Date: Sat, 13 Oct 2012 23:42:20 -0600 [thread overview]
Message-ID: <1350193353-19210-8-git-send-email-mmogilvi_git@miniinfo.net> (raw)
In-Reply-To: <1350193353-19210-1-git-send-email-mmogilvi_git@miniinfo.net>
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
---
git-cvsserver.perl | 220 ++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 159 insertions(+), 61 deletions(-)
diff --git a/git-cvsserver.perl b/git-cvsserver.perl
index 9e71f30..eb8f138 100755
--- a/git-cvsserver.perl
+++ b/git-cvsserver.perl
@@ -1559,10 +1559,12 @@ sub req_status
#$log->debug("status state : " . Dumper($state));
# Grab a handle to the SQLite db and do any necessary updates
- my $updater = GITCVS::updater->new($state->{CVSROOT}, $state->{module}, $log);
+ my $updater;
+ $updater = GITCVS::updater->new($state->{CVSROOT}, $state->{module}, $log);
$updater->update();
- # if no files were specified, we need to work out what files we should be providing status on ...
+ # if no files were specified, we need to work out what files we should
+ # be providing status on ...
argsfromdir($updater);
# foreach file specified on the command line ...
@@ -1570,14 +1572,19 @@ sub req_status
{
$filename = filecleanup($filename);
- next if exists($state->{opt}{l}) && index($filename, '/', length($state->{prependdir})) >= 0;
+ if ( exists($state->{opt}{l}) &&
+ index($filename, '/', length($state->{prependdir})) >= 0 )
+ {
+ next;
+ }
my $meta = $updater->getmeta($filename);
my $oldmeta = $meta;
my $wrev = revparse($filename);
- # If the working copy is an old revision, lets get that version too for comparison.
+ # If the working copy is an old revision, lets get that
+ # version too for comparison.
if ( defined($wrev) and $wrev != $meta->{revision} )
{
$oldmeta = $updater->getmeta($filename, $wrev);
@@ -1585,49 +1592,95 @@ sub req_status
# TODO : All possible statuses aren't yet implemented
my $status;
- # Files are up to date if the working copy and repo copy have the same revision, and the working copy is unmodified
- $status = "Up-to-date" if ( defined ( $wrev ) and defined($meta->{revision}) and $wrev == $meta->{revision}
- and
- ( ( $state->{entries}{$filename}{unchanged} and ( not defined ( $state->{entries}{$filename}{conflict} ) or $state->{entries}{$filename}{conflict} !~ /^\+=/ ) )
- or ( defined($state->{entries}{$filename}{modified_hash}) and $state->{entries}{$filename}{modified_hash} eq $meta->{filehash} ) )
- );
-
- # Need checkout if the working copy has an older revision than the repo copy, and the working copy is unmodified
- $status ||= "Needs Checkout" if ( defined ( $wrev ) and defined ( $meta->{revision} ) and $meta->{revision} > $wrev
- and
- ( $state->{entries}{$filename}{unchanged}
- or ( defined($state->{entries}{$filename}{modified_hash}) and $state->{entries}{$filename}{modified_hash} eq $oldmeta->{filehash} ) )
- );
-
- # Need checkout if it exists in the repo but doesn't have a working copy
- $status ||= "Needs Checkout" if ( not defined ( $wrev ) and defined ( $meta->{revision} ) );
-
- # Locally modified if working copy and repo copy have the same revision but there are local changes
- $status ||= "Locally Modified" if ( defined ( $wrev ) and defined($meta->{revision}) and $wrev == $meta->{revision} and $state->{entries}{$filename}{modified_filename} );
-
- # Needs Merge if working copy revision is less than repo copy and there are local changes
- $status ||= "Needs Merge" if ( defined ( $wrev ) and defined ( $meta->{revision} ) and $meta->{revision} > $wrev and $state->{entries}{$filename}{modified_filename} );
-
- $status ||= "Locally Added" if ( defined ( $state->{entries}{$filename}{revision} ) and not defined ( $meta->{revision} ) );
- $status ||= "Locally Removed" if ( defined ( $wrev ) and defined ( $meta->{revision} ) and -$wrev == $meta->{revision} );
- $status ||= "Unresolved Conflict" if ( defined ( $state->{entries}{$filename}{conflict} ) and $state->{entries}{$filename}{conflict} =~ /^\+=/ );
- $status ||= "File had conflicts on merge" if ( 0 );
+ # Files are up to date if the working copy and repo copy have
+ # the same revision, and the working copy is unmodified
+ if ( defined ( $wrev ) and defined($meta->{revision}) and
+ $wrev == $meta->{revision} and
+ ( ( $state->{entries}{$filename}{unchanged} and
+ ( not defined ( $state->{entries}{$filename}{conflict} ) or
+ $state->{entries}{$filename}{conflict} !~ /^\+=/ ) ) or
+ ( defined($state->{entries}{$filename}{modified_hash}) and
+ $state->{entries}{$filename}{modified_hash} eq
+ $meta->{filehash} ) ) )
+ {
+ $status = "Up-to-date";
+ }
+
+ # Need checkout if the working copy has an older revision than
+ # the repo copy, and the working copy is unmodified
+ if ( defined ( $wrev ) and defined ( $meta->{revision} ) and
+ $meta->{revision} > $wrev and
+ ( $state->{entries}{$filename}{unchanged} or
+ ( defined($state->{entries}{$filename}{modified_hash}) and
+ $state->{entries}{$filename}{modified_hash} eq
+ $oldmeta->{filehash} ) ) )
+ {
+ $status ||= "Needs Checkout";
+ }
+
+ # Need checkout if it exists in the repo but doesn't have a working
+ # copy
+ if ( not defined ( $wrev ) and defined ( $meta->{revision} ) )
+ {
+ $status ||= "Needs Checkout";
+ }
+
+ # Locally modified if working copy and repo copy have the
+ # same revision but there are local changes
+ if ( defined ( $wrev ) and defined($meta->{revision}) and
+ $wrev == $meta->{revision} and
+ $state->{entries}{$filename}{modified_filename} )
+ {
+ $status ||= "Locally Modified";
+ }
+
+ # Needs Merge if working copy revision is less than repo copy
+ # and there are local changes
+ if ( defined ( $wrev ) and defined ( $meta->{revision} ) and
+ $meta->{revision} > $wrev and
+ $state->{entries}{$filename}{modified_filename} )
+ {
+ $status ||= "Needs Merge";
+ }
+
+ if ( defined ( $state->{entries}{$filename}{revision} ) and
+ not defined ( $meta->{revision} ) )
+ {
+ $status ||= "Locally Added";
+ }
+ if ( defined ( $wrev ) and defined ( $meta->{revision} ) and
+ -$wrev == $meta->{revision} )
+ {
+ $status ||= "Locally Removed";
+ }
+ if ( defined ( $state->{entries}{$filename}{conflict} ) and
+ $state->{entries}{$filename}{conflict} =~ /^\+=/ )
+ {
+ $status ||= "Unresolved Conflict";
+ }
+ if ( 0 )
+ {
+ $status ||= "File had conflicts on merge";
+ }
$status ||= "Unknown";
my ($filepart) = filenamesplit($filename);
- print "M ===================================================================\n";
+ print "M =======" . ( "=" x 60 ) . "\n";
print "M File: $filepart\tStatus: $status\n";
if ( defined($state->{entries}{$filename}{revision}) )
{
- print "M Working revision:\t" . $state->{entries}{$filename}{revision} . "\n";
+ print "M Working revision:\t" .
+ $state->{entries}{$filename}{revision} . "\n";
} else {
print "M Working revision:\tNo entry for $filename\n";
}
if ( defined($meta->{revision}) )
{
- print "M Repository revision:\t1." . $meta->{revision} . "\t$state->{CVSROOT}/$state->{module}/$filename,v\n";
+ print "M Repository revision:\t1." .
+ $meta->{revision} .
+ "\t$state->{CVSROOT}/$state->{module}/$filename,v\n";
print "M Sticky Tag:\t\t(none)\n";
print "M Sticky Date:\t\t(none)\n";
print "M Sticky Options:\t\t(none)\n";
@@ -1661,13 +1714,17 @@ sub req_diff
$revision1 =~ s/^1\.// if ( defined ( $revision1 ) );
$revision2 =~ s/^1\.// if ( defined ( $revision2 ) );
- $log->debug("Diffing revisions " . ( defined($revision1) ? $revision1 : "[NULL]" ) . " and " . ( defined($revision2) ? $revision2 : "[NULL]" ) );
+ $log->debug("Diffing revisions " .
+ ( defined($revision1) ? $revision1 : "[NULL]" ) .
+ " and " . ( defined($revision2) ? $revision2 : "[NULL]" ) );
# Grab a handle to the SQLite db and do any necessary updates
- my $updater = GITCVS::updater->new($state->{CVSROOT}, $state->{module}, $log);
+ my $updater;
+ $updater = GITCVS::updater->new($state->{CVSROOT}, $state->{module}, $log);
$updater->update();
- # if no files were specified, we need to work out what files we should be providing status on ...
+ # if no files were specified, we need to work out what files we should
+ # be providing status on ...
argsfromdir($updater);
# foreach file specified on the command line ...
@@ -1722,7 +1779,8 @@ sub req_diff
$file2 = $state->{entries}{$filename}{modified_filename};
}
- # if we have been given -r, and we don't have a $file2 yet, lets get one
+ # if we have been given -r, and we don't have a $file2 yet, lets
+ # get one
if ( defined ( $revision1 ) and not defined ( $file2 ) )
{
( undef, $file2 ) = tempfile( DIR => $TEMP_DIR, OPEN => 0 );
@@ -1733,21 +1791,37 @@ sub req_diff
# We need to have retrieved something useful
next unless ( defined ( $meta1 ) );
- # Files to date if the working copy and repo copy have the same revision, and the working copy is unmodified
- next if ( not defined ( $meta2 ) and $wrev == $meta1->{revision}
- and
- ( ( $state->{entries}{$filename}{unchanged} and ( not defined ( $state->{entries}{$filename}{conflict} ) or $state->{entries}{$filename}{conflict} !~ /^\+=/ ) )
- or ( defined($state->{entries}{$filename}{modified_hash}) and $state->{entries}{$filename}{modified_hash} eq $meta1->{filehash} ) )
- );
+ # Files to date if the working copy and repo copy have the same
+ # revision, and the working copy is unmodified
+ if ( not defined ( $meta2 ) and $wrev == $meta1->{revision} and
+ ( ( $state->{entries}{$filename}{unchanged} and
+ ( not defined ( $state->{entries}{$filename}{conflict} ) or
+ $state->{entries}{$filename}{conflict} !~ /^\+=/ ) ) or
+ ( defined($state->{entries}{$filename}{modified_hash}) and
+ $state->{entries}{$filename}{modified_hash} eq
+ $meta1->{filehash} ) ) )
+ {
+ next;
+ }
# Apparently we only show diffs for locally modified files
- next unless ( defined($meta2) or defined ( $state->{entries}{$filename}{modified_filename} ) );
+ unless ( defined($meta2) or
+ defined ( $state->{entries}{$filename}{modified_filename} ) )
+ {
+ next;
+ }
print "M Index: $filename\n";
- print "M ===================================================================\n";
+ print "M =======" . ( "=" x 60 ) . "\n";
print "M RCS file: $state->{CVSROOT}/$state->{module}/$filename,v\n";
- print "M retrieving revision 1.$meta1->{revision}\n" if ( defined ( $meta1 ) );
- print "M retrieving revision 1.$meta2->{revision}\n" if ( defined ( $meta2 ) );
+ if ( defined ( $meta1 ) )
+ {
+ print "M retrieving revision 1.$meta1->{revision}\n"
+ }
+ if ( defined ( $meta2 ) )
+ {
+ print "M retrieving revision 1.$meta2->{revision}\n"
+ }
print "M diff ";
foreach my $opt ( keys %{$state->{opt}} )
{
@@ -1759,18 +1833,27 @@ sub req_diff
}
} else {
print "-$opt ";
- print "$state->{opt}{$opt} " if ( defined ( $state->{opt}{$opt} ) );
+ if ( defined ( $state->{opt}{$opt} ) )
+ {
+ print "$state->{opt}{$opt} "
+ }
}
}
print "$filename\n";
- $log->info("Diffing $filename -r $meta1->{revision} -r " . ( $meta2->{revision} or "workingcopy" ));
+ $log->info("Diffing $filename -r $meta1->{revision} -r " .
+ ( $meta2->{revision} or "workingcopy" ));
( $fh, $filediff ) = tempfile ( DIR => $TEMP_DIR );
if ( exists $state->{opt}{u} )
{
- system("diff -u -L '$filename revision 1.$meta1->{revision}' -L '$filename " . ( defined($meta2->{revision}) ? "revision 1.$meta2->{revision}" : "working copy" ) . "' $file1 $file2 > $filediff");
+ system("diff -u -L '$filename revision 1.$meta1->{revision}'" .
+ " -L '$filename " .
+ ( defined($meta2->{revision}) ?
+ "revision 1.$meta2->{revision}" :
+ "working copy" ) .
+ "' $file1 $file2 > $filediff" );
} else {
system("diff $file1 $file2 > $filediff");
}
@@ -1795,7 +1878,8 @@ sub req_log
#$log->debug("log state : " . Dumper($state));
my ( $minrev, $maxrev );
- if ( defined ( $state->{opt}{r} ) and $state->{opt}{r} =~ /([\d.]+)?(::?)([\d.]+)?/ )
+ if ( defined ( $state->{opt}{r} ) and
+ $state->{opt}{r} =~ /([\d.]+)?(::?)([\d.]+)?/ )
{
my $control = $2;
$minrev = $1;
@@ -1806,10 +1890,12 @@ sub req_log
}
# Grab a handle to the SQLite db and do any necessary updates
- my $updater = GITCVS::updater->new($state->{CVSROOT}, $state->{module}, $log);
+ my $updater;
+ $updater = GITCVS::updater->new($state->{CVSROOT}, $state->{module}, $log);
$updater->update();
- # if no files were specified, we need to work out what files we should be providing status on ...
+ # if no files were specified, we need to work out what files we
+ # should be providing status on ...
argsfromdir($updater);
# foreach file specified on the command line ...
@@ -1825,7 +1911,8 @@ sub req_log
if ( defined ( $minrev ) )
{
$log->debug("Removing revisions less than $minrev");
- while ( scalar(@$revisions) > 0 and $revisions->[-1]{revision} < $minrev )
+ while ( scalar(@$revisions) > 0 and
+ $revisions->[-1]{revision} < $minrev )
{
pop @$revisions;
}
@@ -1833,7 +1920,8 @@ sub req_log
if ( defined ( $maxrev ) )
{
$log->debug("Removing revisions greater than $maxrev");
- while ( scalar(@$revisions) > 0 and $revisions->[0]{revision} > $maxrev )
+ while ( scalar(@$revisions) > 0 and
+ $revisions->[0]{revision} > $maxrev )
{
shift @$revisions;
}
@@ -1850,7 +1938,8 @@ sub req_log
print "M access list:\n";
print "M symbolic names:\n";
print "M keyword substitution: kv\n";
- print "M total revisions: $totalrevisions;\tselected revisions: " . scalar(@$revisions) . "\n";
+ print "M total revisions: $totalrevisions;\tselected revisions: " .
+ scalar(@$revisions) . "\n";
print "M description:\n";
foreach my $revision ( @$revisions )
@@ -1858,14 +1947,23 @@ sub req_log
print "M ----------------------------\n";
print "M revision 1.$revision->{revision}\n";
# reformat the date for log output
- $revision->{modified} = sprintf('%04d/%02d/%02d %s', $3, $DATE_LIST->{$2}, $1, $4 ) if ( $revision->{modified} =~ /(\d+)\s+(\w+)\s+(\d+)\s+(\S+)/ and defined($DATE_LIST->{$2}) );
+ if ( $revision->{modified} =~ /(\d+)\s+(\w+)\s+(\d+)\s+(\S+)/ and
+ defined($DATE_LIST->{$2}) )
+ {
+ $revision->{modified} = sprintf('%04d/%02d/%02d %s',
+ $3, $DATE_LIST->{$2}, $1, $4 );
+ }
$revision->{author} = cvs_author($revision->{author});
- print "M date: $revision->{modified}; author: $revision->{author}; state: " . ( $revision->{filehash} eq "deleted" ? "dead" : "Exp" ) . "; lines: +2 -3\n";
- my $commitmessage = $updater->commitmessage($revision->{commithash});
+ print "M date: $revision->{modified};" .
+ " author: $revision->{author}; state: " .
+ ( $revision->{filehash} eq "deleted" ? "dead" : "Exp" ) .
+ "; lines: +2 -3\n";
+ my $commitmessage;
+ $commitmessage = $updater->commitmessage($revision->{commithash});
$commitmessage =~ s/^/M /mg;
print $commitmessage . "\n";
}
- print "M =============================================================================\n";
+ print "M =======" . ( "=" x 70 ) . "\n";
}
print "ok\n";
--
1.7.10.2.484.gcd07cc5
next prev parent reply other threads:[~2012-10-14 5:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-14 5:42 [PATCH 00/20] git-cvsserver: add support for cvs "-r" refs Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 01/20] cvsserver t9400: add basic 'cvs log' test Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 02/20] cvsserver: removed unused sha1Or-k mode from kopts_from_path Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 03/20] cvsserver: add comments about database schema/usage Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 04/20] cvsserver update: comment about how we shouldn't remove a user-modified file Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 05/20] cvsserver: remove unused functions _headrev and gethistory Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 06/20] cvsserver: clean up client request handler map comments Matthew Ogilvie
2012-10-14 5:42 ` Matthew Ogilvie [this message]
2012-10-14 5:42 ` [PATCH 08/20] cvsserver: use whole CVS rev number in-process; don't strip "1." prefix Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 09/20] cvsserver: cvs add: do not expand directory arguments Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 10/20] cvsserver status: provide real sticky info Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 11/20] cvsserver: factor out git-log parsing logic Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 12/20] cvsserver: cleanup extra slashes in filename arguments Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 13/20] cvsserver: define a tag name character escape mechanism Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 14/20] cvsserver: add misc commit lookup, file meta data, and file listing functions Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 15/20] cvsserver: implement req_Sticky and related utilities Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 16/20] cvsserver: generalize getmeta() to recognize commit refs Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 17/20] cvsserver: Add version awareness to argsfromdir Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 18/20] cvsserver: support -r and sticky tags for most operations Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 19/20] cvsserver: add t9402 to test branch and tag refs Matthew Ogilvie
2012-10-14 5:42 ` [PATCH 20/20] cvsserver Documentation: new cvs ... -r support Matthew Ogilvie
2012-10-16 19:25 ` [PATCH 00/20] git-cvsserver: add support for cvs "-r" refs Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350193353-19210-8-git-send-email-mmogilvi_git@miniinfo.net \
--to=mmogilvi_git@miniinfo.net \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).