user/dev discussion of public-inbox itself
 help / color / mirror / code / Atom feed
From: "Eric Wong (Contractor, The Linux Foundation)" <e@80x24.org>
To: meta@public-inbox.org
Subject: [PATCH 4/8] v2writable: reduce barriers
Date: Sat,  7 Apr 2018 03:41:50 +0000	[thread overview]
Message-ID: <20180407034154.2309-5-e@80x24.org> (raw)
In-Reply-To: <20180407034154.2309-1-e@80x24.org>

Since we handle the overview info synchronously, we only need
barriers in tests, now.  We will use asynchronous checkpoints
to sync less-important Xapian data.

For data deduplication, this requires us to hoist out the
cat-blob support in ::Import for reading uncommitted data
in git.
---
 lib/PublicInbox/Import.pm     |  34 ++++++++-----
 lib/PublicInbox/V2Writable.pm | 111 ++++++++++++++++++++----------------------
 t/v2writable.t                |   2 +-
 3 files changed, 75 insertions(+), 72 deletions(-)

diff --git a/lib/PublicInbox/Import.pm b/lib/PublicInbox/Import.pm
index 2529798..9e8900f 100644
--- a/lib/PublicInbox/Import.pm
+++ b/lib/PublicInbox/Import.pm
@@ -95,19 +95,13 @@ sub _check_path ($$$$) {
 	$info =~ /\Amissing / ? undef : $info;
 }
 
-sub check_remove_v1 {
-	my ($r, $w, $tip, $path, $mime) = @_;
-
-	my $info = _check_path($r, $w, $tip, $path) or return ('MISSING',undef);
-	$info =~ m!\A100644 blob ([a-f0-9]{40})\t!s or die "not blob: $info";
-	my $blob = $1;
-
-	print $w "cat-blob $blob\n" or wfail;
+sub _cat_blob ($$$) {
+	my ($r, $w, $oid) = @_;
+	print $w "cat-blob $oid\n" or wfail;
 	local $/ = "\n";
-	$info = <$r>;
+	my $info = <$r>;
 	defined $info or die "EOF from fast-import / cat-blob: $!";
-	$info =~ /\A[a-f0-9]{40} blob (\d+)\n\z/ or
-				die "unexpected cat-blob response: $info";
+	$info =~ /\A[a-f0-9]{40} blob (\d+)\n\z/ or return;
 	my $left = $1;
 	my $offset = 0;
 	my $buf = '';
@@ -122,7 +116,23 @@ sub check_remove_v1 {
 	$n = read($r, my $lf, 1);
 	defined($n) or die "read final byte of cat-blob failed: $!";
 	die "bad read on final byte: <$lf>" if $lf ne "\n";
-	my $cur = PublicInbox::MIME->new(\$buf);
+	\$buf;
+}
+
+sub cat_blob {
+	my ($self, $oid) = @_;
+	my ($r, $w) = $self->gfi_start;
+	_cat_blob($r, $w, $oid);
+}
+
+sub check_remove_v1 {
+	my ($r, $w, $tip, $path, $mime) = @_;
+
+	my $info = _check_path($r, $w, $tip, $path) or return ('MISSING',undef);
+	$info =~ m!\A100644 blob ([a-f0-9]{40})\t!s or die "not blob: $info";
+	my $oid = $1;
+	my $msg = _cat_blob($r, $w, $oid) or die "BUG: cat-blob $1 failed";
+	my $cur = PublicInbox::MIME->new($msg);
 	my $cur_s = $cur->header('Subject');
 	$cur_s = '' unless defined $cur_s;
 	my $cur_m = $mime->header('Subject');
diff --git a/lib/PublicInbox/V2Writable.pm b/lib/PublicInbox/V2Writable.pm
index 8361d09..53fdb73 100644
--- a/lib/PublicInbox/V2Writable.pm
+++ b/lib/PublicInbox/V2Writable.pm
@@ -139,7 +139,6 @@ sub num_for {
 		};
 
 		# crap, Message-ID is already known, hope somebody just resent:
-		$self->barrier;
 		foreach my $m (@$mids) {
 			# read-only lookup now safe to do after above barrier
 			my $existing = $self->lookup_content($mime, $m);
@@ -259,10 +258,8 @@ sub purge_oids {
 
 sub remove_internal {
 	my ($self, $mime, $cmt_msg, $purge) = @_;
-	$self->barrier;
 	$self->idx_init;
 	my $im = $self->importer unless $purge;
-	my $ibx = $self->{-inbox};
 	my $over = $self->{over};
 	my $cid = content_id($mime);
 	my $parts = $self->{idx_parts};
@@ -280,7 +277,7 @@ sub remove_internal {
 		my %gone;
 		my ($id, $prev);
 		while (my $smsg = $over->next_by_mid($mid, \$id, \$prev)) {
-			my $msg = $ibx->msg_by_smsg($smsg);
+			my $msg = get_blob($self, $smsg);
 			if (!defined($msg)) {
 				warn "broken smsg for $mid\n";
 				next; # continue
@@ -313,7 +310,6 @@ sub remove_internal {
 			$orig = undef;
 			$self->unindex_oid_remote($oid, $mid);
 		}
-		$self->barrier;
 	}
 
 	if (defined $mark) {
@@ -359,45 +355,6 @@ sub set_last_commits ($) {
 	}
 }
 
-sub done {
-	my ($self) = @_;
-	my $im = delete $self->{im};
-	$im->done if $im; # PublicInbox::Import::done
-
-	my $mm = $self->{mm};
-	$mm->{dbh}->commit if $mm;
-
-	# order matters, we can only close {over} after all partitions
-	# are done because the partitions also write to {over}
-	my $parts = delete $self->{idx_parts};
-	if ($parts) {
-		$_->remote_commit for @$parts;
-		$_->remote_close for @$parts;
-	}
-
-	my $over = $self->{over};
-	$over->commit_lazy;
-	$over->disconnect;
-
-	if ($mm) {
-		$mm->{dbh}->begin_work;
-		set_last_commits($self);
-		$mm->{dbh}->commit;
-		delete $self->{mm};
-	}
-
-	delete $self->{bnote};
-	$self->{transact_bytes} = 0;
-	$self->lock_release if $parts;
-}
-
-sub checkpoint {
-	my ($self) = @_;
-	my $im = $self->{im};
-	$im->checkpoint if $im; # PublicInbox::Import::checkpoint
-	$self->barrier;
-}
-
 sub barrier_init {
 	my ($self, $n) = @_;
 	$self->{bnote} or return;
@@ -416,13 +373,15 @@ sub barrier_wait {
 	}
 }
 
-# issue a write barrier to ensure all data is visible to other processes
-# and read-only ops.  Order of data importance is: git > SQLite > Xapian
-sub barrier {
-	my ($self) = @_;
+sub checkpoint ($;$) {
+	my ($self, $wait) = @_;
 
 	if (my $im = $self->{im}) {
-		$im->barrier;
+		if ($wait) {
+			$im->barrier;
+		} else {
+			$im->checkpoint;
+		}
 	}
 	my $parts = $self->{idx_parts};
 	if ($parts) {
@@ -435,11 +394,17 @@ sub barrier {
 		$self->{over}->commit_lazy;
 
 		# Now deal with Xapian
-		my $barrier = $self->barrier_init(scalar @$parts);
+		if ($wait) {
+			my $barrier = $self->barrier_init(scalar @$parts);
+
+			# each partition needs to issue a barrier command
+			$_->remote_barrier for @$parts;
 
-		# each partition needs to issue a barrier command
-		$_->remote_barrier for @$parts;
-		$self->barrier_wait($barrier); # wait for each Xapian partition
+			# wait for each Xapian partition
+			$self->barrier_wait($barrier);
+		} else {
+			$_->remote_commit for @$parts;
+		}
 
 		# last_commit is special, don't commit these until
 		# remote partitions are done:
@@ -452,6 +417,27 @@ sub barrier {
 	$self->{transact_bytes} = 0;
 }
 
+# issue a write barrier to ensure all data is visible to other processes
+# and read-only ops.  Order of data importance is: git > SQLite > Xapian
+sub barrier { checkpoint($_[0], 1) };
+
+sub done {
+	my ($self) = @_;
+	my $im = delete $self->{im};
+	$im->done if $im; # PublicInbox::Import::done
+	checkpoint($self);
+	my $mm = delete $self->{mm};
+	$mm->{dbh}->commit if $mm;
+	my $parts = delete $self->{idx_parts};
+	if ($parts) {
+		$_->remote_close for @$parts;
+	}
+	$self->{over}->disconnect;
+	delete $self->{bnote};
+	$self->{transact_bytes} = 0;
+	$self->lock_release if $parts;
+}
+
 sub git_init {
 	my ($self, $epoch) = @_;
 	my $pfx = "$self->{-inbox}->{mainrepo}/git";
@@ -512,8 +498,8 @@ sub importer {
 		} else {
 			$self->{im} = undef;
 			$im->done;
-			$self->barrier;
 			$im = undef;
+			$self->checkpoint;
 			my $git_dir = $self->git_init(++$self->{epoch_max});
 			my $git = PublicInbox::Git->new($git_dir);
 			return $self->import_init($git, 0);
@@ -569,15 +555,25 @@ sub diff ($$$) {
 	unlink($an, $bn);
 }
 
+sub get_blob ($$) {
+	my ($self, $smsg) = @_;
+	if (my $im = $self->{im}) {
+		my $msg = $im->cat_blob($smsg->{blob});
+		return $msg if $msg;
+	}
+	# older message, should be in alternates
+	my $ibx = $self->{-inbox};
+	$ibx->msg_by_smsg($smsg);
+}
+
 sub lookup_content {
 	my ($self, $mime, $mid) = @_;
-	my $ibx = $self->{-inbox};
 	my $over = $self->{over};
 	my $cid = content_id($mime);
 	my $found;
 	my ($id, $prev);
 	while (my $smsg = $over->next_by_mid($mid, \$id, \$prev)) {
-		my $msg = $ibx->msg_by_smsg($smsg);
+		my $msg = get_blob($self, $smsg);
 		if (!defined($msg)) {
 			warn "broken smsg for $mid\n";
 			next;
@@ -815,7 +811,6 @@ sub unindex_oid {
 		}
 		$self->{unindexed}->{$_}++ foreach keys %gone;
 		$self->unindex_oid_remote($oid, $mid);
-		$self->barrier;
 	}
 }
 
@@ -823,7 +818,6 @@ my $x40 = qr/[a-f0-9]{40}/;
 sub unindex {
 	my ($self, $opts, $git, $unindex_range) = @_;
 	my $un = $self->{unindexed} ||= {}; # num => removal count
-	$self->barrier;
 	my $before = scalar keys %$un;
 	my @cmd = qw(log --raw -r
 			--no-notes --no-color --no-abbrev --no-renames);
@@ -847,7 +841,6 @@ sub unindex {
 sub index_sync {
 	my ($self, $opts) = @_;
 	$opts ||= {};
-	my $ibx = $self->{-inbox};
 	my $epoch_max;
 	my $latest = git_dir_latest($self, \$epoch_max);
 	return unless defined $latest;
diff --git a/t/v2writable.t b/t/v2writable.t
index 4a42c01..b543c53 100644
--- a/t/v2writable.t
+++ b/t/v2writable.t
@@ -213,8 +213,8 @@ EOF
 	$im = PublicInbox::V2Writable->new($ibx, 1);
 	is($im->{partitions}, 1, 'detected single partition from previous');
 	my $smsg = $im->remove($mime, 'test removal');
-	my @after = $git0->qx(qw(log --pretty=oneline));
 	$im->done;
+	my @after = $git0->qx(qw(log --pretty=oneline));
 	my $tip = shift @after;
 	like($tip, qr/\A[a-f0-9]+ test removal\n\z/s,
 		'commit message propagated to git');
-- 
EW


  parent reply	other threads:[~2018-04-07  3:41 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-07  3:41 [PATCH 0/8] less code, less memory, more speed Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` [PATCH 1/8] psgi: ensure /$INBOX/$MESSAGE_ID/T/ endpoint is chronological Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` [PATCH 2/8] over: avoid excessive SELECT Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` [PATCH 3/8] over: remove forked subprocess Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` Eric Wong (Contractor, The Linux Foundation) [this message]
2018-04-07  3:41 ` [PATCH 5/8] index: allow specifying --jobs=0 to disable multiprocess Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` [PATCH 6/8] convert: support converting with altid defined Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` [PATCH 7/8] store less data in the Xapian document Eric Wong (Contractor, The Linux Foundation)
2018-04-07  3:41 ` [PATCH 8/8] msgmap: speed up minmax with separate queries Eric Wong (Contractor, The Linux Foundation)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: http://public-inbox.org/README

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180407034154.2309-5-e@80x24.org \
    --to=e@80x24.org \
    --cc=meta@public-inbox.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
Code repositories for project(s) associated with this public inbox

	https://80x24.org/public-inbox.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).