From: "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
To: pclouds@gmail.com
Cc: git@vger.kernel.org, gitster@pobox.com, sunshine@sunshineco.com,
szeder.dev@gmail.com
Subject: [PATCH v7 00/13] Keep all info in command-list.txt in git binary
Date: Thu, 10 May 2018 10:46:39 +0200 [thread overview]
Message-ID: <20180510084652.25880-1-pclouds@gmail.com> (raw)
In-Reply-To: <20180507175222.12114-1-pclouds@gmail.com>
v7 is mostly code cleanup plus one more change:
git-completion.bash now always checks completion.commands config key.
This makes it much more convenient to customize the command complete
list. You only have to fall back to setting $GIT_COMPLETION_CMD_GROUPS
when you have very special needs.
Interdiff
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 2659153cb3..91f7eaed7b 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -1343,6 +1343,16 @@ credential.<url>.*::
credentialCache.ignoreSIGHUP::
Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting.
+completion.commands::
+ This is only used by git-completion.bash to add or remove
+ commands from the complete list. Normally only porcelain
+ commands and a few select others are in the complete list. You
+ can add more commands, separated by space, in this
+ variable. Prefixing a command with '-' will remove it from
+ the existing list.
++
+This variable should not be per-repository.
+
include::diff-config.txt[]
difftool.<tool>.path::
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 0fd29803d5..f7ca9a4d4f 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -50,10 +50,10 @@
#
# GIT_COMPLETION_CMD_GROUPS=main,others
#
-# Or you could go with defaults add some extra commands specified
-# in the configuration variable completion.commands [1] with
+# Or you could go with main porcelain only and extra commands in
+# the configuration variable completion.commands with
#
-# GIT_COMPLETION_CMD_GROUPS=mainporcelain,others,list-complete,config
+# GIT_COMPLETION_CMD_GROUPS=mainporcelain,config
#
# Or go completely custom group with
#
@@ -61,15 +61,6 @@
#
# Or you could even play with other command categories found in
# command-list.txt.
-#
-# [1] Note that completion.commands should not be per-repository
-# since the command list is generated once and cached.
-#
-# completion.commands could be used to exclude commands as
-# well. If a command in this list begins with '-', then it
-# will be excluded from the list of commands gathered by the
-# groups specified before "config" in
-# $GIT_COMPLETION_CMD_GROUPS.
case "$COMP_WORDBREAKS" in
*:*) : great ;;
@@ -876,7 +867,7 @@ __git_commands () {
then
git --list-cmds="$GIT_COMPLETION_CMD_GROUPS"
else
- git --list-cmds=list-mainporcelain,others,list-complete
+ git --list-cmds=list-mainporcelain,others,list-complete,config
fi
;;
all)
diff --git a/generate-cmdlist.sh b/generate-cmdlist.sh
index bfd8ef0671..8d6d8b45ce 100755
--- a/generate-cmdlist.sh
+++ b/generate-cmdlist.sh
@@ -9,7 +9,7 @@ command_list () {
grep -v '^#' "$1"
}
-get_categories() {
+get_categories () {
tr ' ' '\n'|
grep -v '^$' |
sort |
@@ -32,7 +32,7 @@ get_synopsis () {
}' "Documentation/$1.txt"
}
-define_categories() {
+define_categories () {
echo
echo "/* Command categories */"
bit=0
@@ -45,7 +45,7 @@ define_categories() {
test "$bit" -gt 32 && die "Urgh.. too many categories?"
}
-define_category_names() {
+define_category_names () {
echo
echo "/* Category names */"
echo "static const char *category_names[] = {"
@@ -60,7 +60,7 @@ define_category_names() {
echo "};"
}
-print_command_list() {
+print_command_list () {
echo "static struct cmdname_help command_list[] = {"
command_list "$1" |
diff --git a/git.c b/git.c
index fd08911e11..ea4feedd0b 100644
--- a/git.c
+++ b/git.c
@@ -38,6 +38,13 @@ static int use_pager = -1;
static void list_builtins(struct string_list *list, unsigned int exclude_option);
+static int match_token(const char *spec, int len, const char *token)
+{
+ int token_len = strlen(token);
+
+ return len == token_len && !strncmp(spec, token, token_len);
+}
+
static int list_cmds(const char *spec)
{
struct string_list list = STRING_LIST_INIT_DUP;
@@ -47,13 +54,13 @@ static int list_cmds(const char *spec)
const char *sep = strchrnul(spec, ',');
int len = sep - spec;
- if (len == 8 && !strncmp(spec, "builtins", 8))
+ if (match_token(spec, len, "builtins"))
list_builtins(&list, 0);
- else if (len == 4 && !strncmp(spec, "main", 4))
+ else if (match_token(spec, len, "main"))
list_all_main_cmds(&list);
- else if (len == 6 && !strncmp(spec, "others", 6))
+ else if (match_token(spec, len, "others"))
list_all_other_cmds(&list);
- else if (len == 6 && !strncmp(spec, "config", 6))
+ else if (match_token(spec, len, "config"))
list_cmds_by_config(&list);
else if (len > 5 && !strncmp(spec, "list-", 5)) {
struct strbuf sb = STRBUF_INIT;
Nguyễn Thái Ngọc Duy (13):
generate-cmds.sh: factor out synopsis extract code
generate-cmds.sh: export all commands to command-list.h
help: use command-list.h for common command list
Remove common-cmds.h
git.c: convert --list-* to --list-cmds=*
git --list-cmds: collect command list in a string_list
completion: implement and use --list-cmds=main,others
git: support --list-cmds=list-<category>
help: add "-a --verbose" to list all commands with synopsis
help: use command-list.txt for the source of guides
command-list.txt: documentation and guide line
completion: let git provide the completable command list
completion: allow to customize the completable command list
.gitignore | 2 +-
Documentation/config.txt | 10 +
Documentation/git-help.txt | 4 +-
Documentation/gitattributes.txt | 2 +-
Documentation/gitmodules.txt | 2 +-
Documentation/gitrevisions.txt | 2 +-
Makefile | 16 +-
builtin/help.c | 39 +---
command-list.txt | 111 ++++++++---
contrib/completion/git-completion.bash | 160 +++++++---------
generate-cmdlist.sh | 126 ++++++++-----
git.c | 68 ++++++-
help.c | 244 ++++++++++++++++++++++---
help.h | 10 +
t/t0012-help.sh | 26 ++-
t/t9902-completion.sh | 5 +-
16 files changed, 573 insertions(+), 254 deletions(-)
--
2.17.0.705.g3525833791
next prev parent reply other threads:[~2018-05-10 8:47 UTC|newest]
Thread overview: 137+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-26 16:55 [PATCH/RFC 0/5] Keep all info in command-list.txt in git binary Nguyễn Thái Ngọc Duy
2018-03-26 16:55 ` [PATCH/RFC 1/5] git.c: convert --list-builtins to --list-cmds=builtins Nguyễn Thái Ngọc Duy
2018-03-26 16:55 ` [PATCH/RFC 2/5] git.c: implement --list-cmds=all and use it in git-completion.bash Nguyễn Thái Ngọc Duy
2018-04-09 3:32 ` Eric Sunshine
2018-03-26 16:55 ` [PATCH/RFC 3/5] generate-cmdlist.sh: keep all information in common-cmds.h Nguyễn Thái Ngọc Duy
2018-04-09 4:59 ` Eric Sunshine
2018-04-09 5:12 ` Eric Sunshine
2018-04-09 16:16 ` Duy Nguyen
2018-04-15 16:04 ` Duy Nguyen
2018-03-26 16:55 ` [PATCH/RFC 4/5] git.c: implement --list-cmds=porcelain Nguyễn Thái Ngọc Duy
2018-03-26 16:55 ` [PATCH/RFC 5/5] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-04-09 5:08 ` Eric Sunshine
2018-04-09 9:47 ` Junio C Hamano
2018-04-09 9:55 ` Eric Sunshine
2018-04-09 15:15 ` Duy Nguyen
2018-04-09 5:17 ` [PATCH/RFC 0/5] Keep all info in command-list.txt in git binary Eric Sunshine
2018-04-11 22:06 ` Philip Oakley
2018-04-14 15:44 ` Duy Nguyen
2018-04-15 21:21 ` Philip Oakley
2018-04-17 16:24 ` Duy Nguyen
2018-04-17 16:48 ` Duy Nguyen
2018-04-17 22:47 ` Philip Oakley
2018-04-18 6:38 ` Philip Oakley
2018-04-18 15:33 ` Duy Nguyen
2018-04-19 7:47 ` Philip Oakley
2018-04-15 16:42 ` [PATCH v2 0/6] " Nguyễn Thái Ngọc Duy
2018-04-15 16:42 ` [PATCH v2 1/6] git.c: convert --list-builtins to --list-cmds=builtins Nguyễn Thái Ngọc Duy
2018-04-15 16:42 ` [PATCH v2 2/6] git.c: implement --list-cmds=all and use it in git-completion.bash Nguyễn Thái Ngọc Duy
2018-04-16 2:30 ` Junio C Hamano
2018-04-15 16:42 ` [PATCH v2 3/6] generate-cmdlist.sh: keep all information in common-cmds.h Nguyễn Thái Ngọc Duy
2018-04-16 2:38 ` Junio C Hamano
2018-04-23 8:23 ` Øystein Walle
2018-04-23 9:59 ` SZEDER Gábor
2018-04-16 6:28 ` Junio C Hamano
2018-04-16 15:43 ` Duy Nguyen
2018-04-16 15:43 ` SZEDER Gábor
2018-04-16 16:25 ` Ramsay Jones
2018-04-16 22:42 ` Junio C Hamano
2018-04-15 16:42 ` [PATCH v2 4/6] git.c: implement --list-cmds=porcelain Nguyễn Thái Ngọc Duy
2018-04-15 16:42 ` [PATCH v2 5/6] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-04-15 16:42 ` [PATCH v2 6/6] help: use command-list.txt for the source of guides Nguyễn Thái Ngọc Duy
2018-04-21 16:54 ` [PATCH v3 0/6] Keep all info in command-list.txt in git binary Nguyễn Thái Ngọc Duy
2018-04-21 16:54 ` [PATCH v3 1/6] git.c: convert --list-*builtins to --list-cmds=* Nguyễn Thái Ngọc Duy
2018-04-21 16:54 ` [PATCH v3 2/6] git.c: implement --list-cmds=all and use it in git-completion.bash Nguyễn Thái Ngọc Duy
2018-04-23 11:20 ` SZEDER Gábor
2018-04-21 16:54 ` [PATCH v3 3/6] generate-cmdlist.sh: keep all information in common-cmds.h Nguyễn Thái Ngọc Duy
2018-04-21 16:54 ` [PATCH v3 4/6] git.c: implement --list-cmds=porcelain Nguyễn Thái Ngọc Duy
2018-04-23 13:32 ` SZEDER Gábor
2018-04-24 16:12 ` Duy Nguyen
2018-04-24 16:17 ` Duy Nguyen
2018-04-25 13:46 ` SZEDER Gábor
2018-04-25 14:44 ` Duy Nguyen
2018-04-25 13:06 ` SZEDER Gábor
2018-04-25 14:39 ` Duy Nguyen
2018-04-21 16:54 ` [PATCH v3 5/6] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-04-21 16:54 ` [PATCH v3 6/6] help: use command-list.txt for the source of guides Nguyễn Thái Ngọc Duy
2018-04-23 6:07 ` Eric Sunshine
2018-04-21 16:56 ` [PATCH v3 0/6] Keep all info in command-list.txt in git binary Duy Nguyen
2018-04-22 14:45 ` Ramsay Jones
2018-04-22 15:22 ` Duy Nguyen
2018-04-22 15:58 ` Ramsay Jones
2018-04-22 16:12 ` Duy Nguyen
2018-04-22 16:36 ` Ramsay Jones
2018-04-25 16:30 ` [PATCH v4/wip 00/12] " Nguyễn Thái Ngọc Duy
2018-04-25 16:30 ` [PATCH v4/wip 01/12] generate-cmds.sh: factor out synopsis extract code Nguyễn Thái Ngọc Duy
2018-04-25 17:59 ` Eric Sunshine
2018-04-25 18:13 ` SZEDER Gábor
2018-04-25 16:30 ` [PATCH v4/wip 02/12] generate-cmds.sh: export all commands to command-list.h Nguyễn Thái Ngọc Duy
2018-04-25 18:07 ` Eric Sunshine
2018-04-29 16:11 ` Duy Nguyen
2018-04-25 16:30 ` [PATCH v4/wip 03/12] help: use command-list.h for common command list Nguyễn Thái Ngọc Duy
2018-04-25 16:30 ` [PATCH v4/wip 04/12] Remove common-cmds.h Nguyễn Thái Ngọc Duy
2018-04-25 16:31 ` [PATCH v4/wip 05/12] git.c: convert --list-*builtins to --list-cmds=* Nguyễn Thái Ngọc Duy
2018-04-25 16:31 ` [PATCH v4/wip 06/12] git: accept multiple --list-cmds options Nguyễn Thái Ngọc Duy
2018-04-25 18:12 ` Eric Sunshine
2018-04-25 16:31 ` [PATCH v4/wip 07/12] completion: implement and use --list-cmds=all Nguyễn Thái Ngọc Duy
2018-04-25 16:31 ` [PATCH v4/wip 08/12] git: support --list-cmds=<category> Nguyễn Thái Ngọc Duy
2018-04-25 18:16 ` Eric Sunshine
2018-04-25 16:31 ` [PATCH v4/wip 09/12] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-04-25 16:31 ` [PATCH v4/wip 10/12] help: use command-list.txt for the source of guides Nguyễn Thái Ngọc Duy
2018-04-25 18:22 ` Eric Sunshine
2018-04-25 16:31 ` [PATCH v4/wip 11/12] command-list.txt: add new category "complete" Nguyễn Thái Ngọc Duy
2018-04-25 16:31 ` [PATCH v4/wip 12/12] completion: let git provide the completable command list Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 00/10] Keep all info in command-list.txt in git binary Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 01/10] generate-cmds.sh: factor out synopsis extract code Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 02/10] generate-cmds.sh: export all commands to command-list.h Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 03/10] help: use command-list.h for common command list Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 04/10] Remove common-cmds.h Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 05/10] git.c: convert --list-*builtins to --list-cmds=* Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 06/10] completion: implement and use --list-cmds=main,others Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 07/10] git: support --list-cmds=list-<category> Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 08/10] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-04-29 18:18 ` [PATCH v5 09/10] help: use command-list.txt for the source of guides Nguyễn Thái Ngọc Duy
2018-04-29 18:23 ` Duy Nguyen
2018-04-29 18:18 ` [PATCH v5 10/10] completion: let git provide the completable command list Nguyễn Thái Ngọc Duy
2018-04-30 15:53 ` [PATCH v5 00/10] Keep all info in command-list.txt in git binary Duy Nguyen
2018-05-07 17:52 ` [PATCH v6 00/13] " Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 01/13] generate-cmds.sh: factor out synopsis extract code Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 02/13] generate-cmds.sh: export all commands to command-list.h Nguyễn Thái Ngọc Duy
2018-05-08 3:47 ` Junio C Hamano
2018-05-07 17:52 ` [PATCH v6 03/13] help: use command-list.h for common command list Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 04/13] Remove common-cmds.h Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 05/13] git.c: convert --list-* to --list-cmds=* Nguyễn Thái Ngọc Duy
2018-05-08 3:50 ` Junio C Hamano
2018-05-07 17:52 ` [PATCH v6 06/13] git --list-cmds: collect command list in a string_list Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 07/13] completion: implement and use --list-cmds=main,others Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 08/13] git: support --list-cmds=list-<category> Nguyễn Thái Ngọc Duy
2018-05-08 4:00 ` Junio C Hamano
2018-05-07 17:52 ` [PATCH v6 09/13] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 10/13] help: use command-list.txt for the source of guides Nguyễn Thái Ngọc Duy
2018-05-08 4:04 ` Junio C Hamano
2018-05-07 17:52 ` [PATCH v6 11/13] command-list.txt: documentation and guide line Nguyễn Thái Ngọc Duy
2018-05-12 17:50 ` Philip Oakley
2018-05-07 17:52 ` [PATCH v6 12/13] completion: let git provide the completable command list Nguyễn Thái Ngọc Duy
2018-05-07 17:52 ` [PATCH v6 13/13] completion: allow to customize " Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` Nguyễn Thái Ngọc Duy [this message]
2018-05-10 8:46 ` [PATCH v7 01/13] generate-cmds.sh: factor out synopsis extract code Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 02/13] generate-cmds.sh: export all commands to command-list.h Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 03/13] help: use command-list.h for common command list Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 04/13] Remove common-cmds.h Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 05/13] git.c: convert --list-* to --list-cmds=* Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 06/13] git --list-cmds: collect command list in a string_list Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 07/13] completion: implement and use --list-cmds=main,others Nguyễn Thái Ngọc Duy
2018-05-11 14:06 ` SZEDER Gábor
2018-05-11 14:32 ` SZEDER Gábor
2018-05-11 16:33 ` Duy Nguyen
2018-05-10 8:46 ` [PATCH v7 08/13] git: support --list-cmds=list-<category> Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 09/13] help: add "-a --verbose" to list all commands with synopsis Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 10/13] help: use command-list.txt for the source of guides Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 11/13] command-list.txt: documentation and guide line Nguyễn Thái Ngọc Duy
2018-05-10 8:46 ` [PATCH v7 12/13] completion: let git provide the completable command list Nguyễn Thái Ngọc Duy
2018-05-11 15:05 ` SZEDER Gábor
2018-05-13 6:50 ` Duy Nguyen
2018-05-10 8:46 ` [PATCH v7 13/13] completion: allow to customize " Nguyễn Thái Ngọc Duy
2018-04-19 10:37 ` [PATCH/RFC 0/5] Keep all info in command-list.txt in git binary Simon Ruderich
2018-04-19 11:26 ` SZEDER Gábor
2018-04-20 7:05 ` Simon Ruderich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: http://vger.kernel.org/majordomo-info.html
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180510084652.25880-1-pclouds@gmail.com \
--to=pclouds@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=sunshine@sunshineco.com \
--cc=szeder.dev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://80x24.org/mirrors/git.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).